How to switch off scroll and zoom functions of touchpad on Satellite L

Hi.
Can anyone tell me how to switch off the scroll and zoom functions for the Synaptics Touchpad v7.2 .
Can't seem to do it via the Control Panel.
Any suggestions.

Hi buddy,
> Can't seem to do it via the Control Panel.
You can only disable the virtual scrolling function if the touchpad driver is installed properly. The driver provides extended functions and allows you to disable/enable special features. If you dont have installed the touchpad driver download it on official Toshiba page:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
Then navigate to control panel as the previous user wrote for disabling the scroll function.
Can you find it now?

Similar Messages

How to switch-off Tax jurisdiction code functionality

Dear Genius people,
Please let me know how to put off Tax jurisdiction code for Tax procedure with Jurisdiction code.
Regards,

Hi,
You can delete tax code from tax procedure.
Path: Financial Account/Glbal settings/tax on sales and purchase/caiculation/settings for tax calculation in Brazil/Define FI/mm tax codes.
After deleting tax code you delete tax jurisdiction for required tax procedure.
Hope this helps.
Please assign points as a way to say thanks.

E90 - How to switch off GPS and other apps etc and...

I have just got my new E90 a few days ago, it is back on the market, so far it is terrific, no issues what so ever. However I thought I had exited the GPS app correctly, but the battery drained quite quickly as I think it was on ( few hours). How does one know what is running, eg is there is an equivalent Task manager like in Windows ? When I reboot and dont start the GPS the phone battery has lasted for days.
By the way - initally my E90 GPS took less than 1 minute to lock in, and thereafter it takes seconds. Quite amazing.

07-Oct-200708:40 PM
wolf666 wrote:
07-Oct-200705:45 PM
tonyl wrote:
Another Question - can I use the phones USB port to access an external memory device such as a 40G or 120G HD or even the solid state USB memory sticks ?
PS I am really enjoying this phone compared to my previous SE P910i, and others.
Not sure what you mean, you can only connect to a PC running PC suite and having the usb drivers installed.
More then this, access is triggered in one way PC to E90, not in the reverse !
I didn't event tested it, but almost sure it won't work.
Domdom

How to switch off screen blocking if I forget password and couldn't use iTunes?

How to switch off screen blocking if I forget password and couldn't use iTunes?

If you are saying that you've forgotten the passcode to unlock the iPad then you will need to connect the iPad to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode for your iTunes to be able to reset it : http://support.apple.com/kb/ht1808
If you do it via a different computer then :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

I have such problem, at iphone 4s connection to itunes there is a synchronization well and after iphone is frozen and the woman explaining the instruction starts to speak (How to unblock how to switch off a sound, etc.). iphone reacts to one team, and the

I have such problem, at iphone 4s connection to itunes there is a synchronization well and after iphone is frozen and the woman explaining the instruction starts to speak (How to unblock how to switch off a sound, etc.). iphone reacts to one team, and the woman tells everything and speaks. I took iphone from a wire, but it didn't react. At attempt to switch off it it is switched off, but deletes all files which only existed on this device. What to do and how to solve this problem?

Try posting in your native language. I can't even figure out what your "problem" is from this.

How to switch off the Wireless Transmitting of the xDock for the iPod?

Hey,
Can anybody help me how to switch off the wireless streaming of the xDock transmitter for the iPod? I tried to do it by resetting and I already read the FAQ but nothing seemed to work...
Thanks for your help. ;-)
Hi,
Kann mir irgendjemand sagen, wie ich bei meinem xDock Transmitter f?r den iPod das wireless streaming ausschalten kann? Ich habe bereits versucht das Ger?t zu resetten und habe das FAQ gelesen aber nichts hat geholfen...
Vielen Dank im Vorraus f?r eure Hilfe ;-)

turn it into standby mode
unplug the power supply from the x-fi dock
press the volume controller and hold it while plugging the power supply
the link control led on the backside will glow shortly and and turn off
thats it
to reactivate it press both the forward and backward wind button for at least 3 seconds
But I think, this is really a shame, that the WLAN network is unusable when using the x-Fi wireless function.

How to switch off automatic creation of the business partner?

Hello!
Advise please why in erp after creation of the customer automatically form business partner? How to switch off automatic creation of the business partner? It very much disturbs, because business partner are created from crm. Because of automatic creation business partners are duplicated.

Hi,
I have made the following customizing settings to activate customer integration with business partner, but the problem is when I create a BP with a role (FI-Customer) the customer is not created automatically.
1. Set BP Role Category for Direction BP to Customer
Roles: FLCU00 - Business Partner FI Customer (FS: BP)
FLCU01 - Business Partner Customer (FS: BP)
2. Defined the Number assignment for Direction BP to customer
4. Customer account group and numbering is also defined.
3. Created a BP with BP Role FLCU00, I can see the Customer - General Data tab, but no customer was automatically generated by the system.
Kindly let me know if any customizing I have missed.
Regards
Ameya

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

How to switch off the pop-up message in rspcm

Hi there,
Does anyone know how to switch off the pop-up message in rspcm?
The monitoring user shouldn't get the pop-up below anymore:
Statusänderung des Requests Sollen Folge-Events ausgelöst werden?
The pop-up in english might be
status change of request - trigger subsequent processing? or similar
We would like to outsource the process chain monitoring (rspcm) to our operating.
But operating shouldn't deal with the pop-up above and make decisions especially when delta infopackages are involved.
Thanks for your help in advance.
Regards,
Wolfgang Smetana

Elena,
Is the subsequent process defined on success or failure ? if that is not defined - you might come across this message.....
Arun

How to switch off the error sound in Triversity

Hi
How to switch off the error sound in Triversity, The audio of the computer is already in mute state. The problem is found with DELL pc and not with HP

Mohammed,
There is, actually, a better way to get rid of that annoying beep every time you get a policy prompt, error, etc.
I have a Dell Vostro 1300 and I have done this in other Dell laptops with sucess. Perform the following:
Go to Control Panel --> System --> (on the HARDWARE tab) Click on DEVICE MANAGER
In DEVICE MANAGER, click on VIEW --> SHOW HIDDEN DEVICES
Now, go to "NON-PLUG AND PLAY DRIVERS" and you will see "BEEP" listed as an active device. Right click on it and select "DISABLE" and then reboot your laptop.
You should be golden right after the reboot.
Hope this helped,
Alfredo Carigga

Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage

Dear Support,
Is there a possibility to switch off in Firefox the functionality of quick launch key (additional key in laptop) that cause to run the homepage. I would like to switch this functionality off, because the key is malfunctioned and always pressed. I was able to switch off the functionality of this key in Windows system by deleting entries in registry Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey. After this change, when somebody works in system the Firefox is not running is not launching all the time. But when I open the Firefox the setting in system is overwritten and when I am using it Firefox returns to the homepage instantly. I think because of this quick launch button. I tried to change settings in about:config like browser.startup.homepage, browser.startup.homepage_override, startup.homepage_override_url,… this is for Firefox version is 10.0.2
Thank you
Best Regards

Hi,
Thank you for your interesst.
This internet button key is one of buttons located above the keyboard near the power button. What I have achieved to this moment was to stop it functionality in the system by clearing the entries in the fields Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17\ShellExecute and entry
Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7\Association that was http
After these changes in registry the behavior of the button was suppressed, the Firefox stopped to start unexpectedly all the time – so in system it works. But the problem is still when I have opened Firefox. Every time when you want to surf in internet – the homepage is activated also unexpectedly. I wrote this post with intention to ask if there is a possibility to switch off the functionality of this quick launch button in Firefox. Because I assume Firefox overrides the system setup – this I have made in registry. I tried with some option changes in about:config but without success. And I know that for older versions of firefox was some option in about:config do disable_quick launch button. But in 10.0.2 I couldn't locate it.
Thank you
Regards
Lukasz

How to switch off my main screen (Imac 24") to use an external proyector?

Please Help!
How to switch off my main screen (Imac 24") to use an external proyector?
It's not comfortable when you want to see a nice movie!
Thanks
Jack

As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

DOM Parser Configuration...how to switch off DTD validation?

Hi all,
I am developing some implementation code in Java using JBuilder2005, in which DOM3 parser is also being utilised. Now the question is how to switch off DTD validation (seems its default mode is 'on') so that no validation will be carried out at all even DTD declaration statement is presented in an input XML document?
Many thanks in advance
Frank

First of all, thank you so much for responding, DrClap. =)
setValidating(false) of the DocumentBuilderFactory instance, factory, does not work as expected; it still stubbornly try to seek the external DTD file and fires 'IOException' error in case of no such a DTD.
To follow up the EntityResolver approach, I searched online for almost the whole afternoon but still could not figure out how to do it exactly. In particular, I found http://www.jdom.org/docs/faq.html#a0350, which tells a way doing it, but I got 'StringBufferInputStream is deprecated' error. Then I changed to
new InputStream(new ByteArrayInputStream("".getBytes()))adapted from http://forum.java.sun.com/thread.jspa?threadID=572919&messageID=2842185. But another error occurs: 'java.io.InputStream is abstract; cannot be instantiated'. Furthermore, I have looked at many docs(tutorials, APIs...) on parser configuration, usage of EntityResolver/setEntityResolver()...but they turned out not helpful. Could you please give out more details on how to do this using EntityResolver?? Many many thanks...

Imac intel self scrolling and zooming

Hi Guys,
<Sorry for my English, It's not my native language>
In the last couple days I found that my iMac is randomly scroll to the bottom of page
in finder, chrome, safari, photoshop and every application
Today it just getting worse becaust it started to zoom in and out
Then, a few hours ago it started to scroll and zoom at the same time
I've look around the discussion forum and found some thread abou this issue
but there seem no solution.
my system is iMac intel 27inch
osx 10.6.8 installed
magic mouse + wacom bamboo
I'm quite sure that the problem is from the OS becaust I tried remove the wacom, keyboard and magic mouse
but it didn't help.
Please anyone could help??
Thanks in advance!!

THat behavior sounds like it could be caused by a stuck key on the keyboard.
If the icon that is selected autonomously is the same one each time, then the first letter of its name may be a clue. If it is something other than the alphanumerical last first-letter of names of items on the desktop, then its first letter is probably the stuck key.
If its name's first letter is the last alphanumerically, then it gets trickier to find. For example, the last filename alphanumerically on my desktop starts with the letter T which means that if I press and hold T, U, V, W, X, Y, or Z it will be selected.
One way to test whether the cause is a stuck key - disconnect the keyboard (unplug it if USB, turn it off if wireless) and wait.

How to switch off web cam?

Hello
Does anybody know how to switch off web cam? It interferes me when I touch it with my mouse accidentally.
Thanks

Hi roxol,
> It interferes me when I touch it with my mouse accidentally
Im a little bit confused about this How you can touch it with the mouse?
Furthermore your posting is not very detailed. I miss some important informations about your notebook and OS.
At the moment I can only say that you should reinstall the webcam driver. The newest version you can find on the Toshiba website.

How to switch off scroll and zoom functions of touchpad on Satellite L

Similar Messages

Maybe you are looking for