How to Swithch on Modification Assitance in Program

Hi friends,
please let me know how to switch on modification assitance in my program.
pls help me out regarding that..
regards
devi

Hi,
It is not possible to switch on modification assistance once it is switched off..
Thanks and Regards,
Litta.

Similar Messages

How to do the Validations in Report Programming?

How to do the Validations in Report Programming?
how to do screen Validations and Field Validations if posssible can any one send the code regarding the Validation ....
Tks
Durusoju

AT SELECTION-SCREEN - selscreen_event
Syntax
| { ON {para|selcrit} }
| { ON END OF selcrit }
| { ON BLOCK block }
| { ON RADIOBUTTON GROUP radi }
| { }
| { ON {HELP-REQUEST|VALUE-REQUEST}
| FOR {para|selcrit-low|selcrit-high} }
| { ON EXIT-COMMAND }.
Alternatives:
1. ... OUTPUT
2. ... ON {para|selcrit}
3. ... ON END OF selcrit
4. ... ON BLOCK block
5. ... ON RADIOBUTTON GROUP radi
6. ... { }
7. ... ON {HELP-REQUEST|VALUE-REQUEST} FOR
 {para|selcrit-low|selcrit-high} }
8. ... ON EXIT-COMMAND
Effect
These additions allow individual evaluation of specific elements of the selection screens of the program. The information as to which selection has triggered the event is contained in the system field sy-dynnr.
Alternative 1
... OUTPUT
Effect
This event is triggered at the screen event PBO of a selection screen. In the event block, the selection screen can be prepared through assignments to the data objects of parameters and selection criteria and through dynamic screen modifications.
Note
The assignments to input fields in the event block AT SELECTION-SCREEN OUTPUT always affect the selection screen and overwrite the user inputs from previous displays of the same selection screen. Assignments in the event blocks LOAD-OF-PROGRAM oder INITIALIZATION, on the other hand, only have an effect at first program start.
Alternative 2
... ON {para|selcrit}
Effect
This event is triggered at the screen event PAI of a selection screen if the content of the input field of a parameter para or a line of a selection criterion selcrit was passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or an error message in the event block makes the fields para and selcrit ready for input again.
No parameter that is defined as a radio button can be specified. For this purpose, the addition ON RADIOBUTTON GROUP is provided.
Note
If a user action takes place in the dialog box for the multiple selection of a selection criterion selcrit, the entries of the selection table are passed to the program, line by line. For each line, the event AT SELECTION-SCREEN ON selcrit is triggered.
Alternative 3
... ON END OF selcrit
Effect
This event is triggered after the selection table selcrit has been fully passed to the program after a user action in the dialog box for the multiple selection has taken place. In the event block, the entire selection table can be checked.
Alternative 4
... ON BLOCK block
Effect
This event is triggered at the screen event PAI of a selection screen if all the input fields of a block block of the selection screen were passed to the ABAP program. In the event block, the user inputs can be checked. Sending a warning or an error message in the event block makes all the fields of the block block ready for input again.
Alternative 5
... ON RADIOBUTTON GROUP radi
Effect
This event is triggered at the screen event PAI of a selection screen if all the fields of a radio button group radi of the selection screen were passed to the ABAP program. In the event block, the user input can be checked. Sending a warning or error message in the event block makes all the radion buttons of the block radi ready for input again.
Note
The individual fields of a radio button group are not passed individually and do not trigger the event AT SELECTION-SCREEN ON par.
Alternative 6
Effect
The event AT SELECTION-SCREEN itself is triggered as the last event of selection screen processing if all the input values were passed to the program. In this event block, all the user inputs can be checked. Sending a warning or an error message in the event block makes all the screen fields ready for input once again.
Alternative 7
... ON { HELP-REQUEST | VALUE-REQUEST } FOR
 {para|selcrit-low|selcrit-high} }
Effect
The two events ON HELP-REQUEST and ON VALUE-REQUEST are triggered at the screen events POH and POV of a selection screen if - for the input field of a parameter para or one of the input fields of a selection criterion selcrit - the field help F1 or the input help F4 was called. Other selection events are not triggered.
In the event blocks, a self-defined field or input field can be programmed, which overrides any helps possibly defined in the ABAP Dictionary.
Notes
These event blocks can only be implemented for fields of the selection screen that are defined in the same ABAP program and not in a possibly linked logical database.
With the events for the field and input help, no data is transported between the selection screen and the ABAP program. As with general screens, suitable function modules must be used for these. The parameters and selection criteria changed for the input help are transported to the selection screen.
Alternative 8
... ON EXIT-COMMAND
Effect
This event is triggered if the user has called one of the functions Back, Exit or Cancel. In the event block, possible clean-up actions can be executed.
Example
In these executable programs, a standard selection screen and a further selection screen are defined. In the event blocks AT SELECTION-SCREEN, the inputs in the selection screens can be specially handled using the name p_carrid and the screen number in sy-dynnr.
REPORT demo_at_selection_screen.
Global data
DATA: sflight_tab TYPE TABLE OF sflight,
 sflight_wa LIKE LINE OF sflight_tab.
Selection screens
PARAMETERS p_carrid TYPE spfli-carrid.
SELECTION-SCREEN BEGIN OF SCREEN 500.
SELECT-OPTIONS s_conn FOR sflight_wa-connid.
DATA s_conn_wa LIKE LINE OF s_conn.
SELECTION-SCREEN END OF SCREEN 500.
Handling selection screen events
AT SELECTION-SCREEN ON p_carrid.
IF p_carrid IS INITIAL.
 MESSAGE 'Please enter a value' TYPE 'E'.
ENDIF.
AUTHORITY-CHECK OBJECT 'S_CARRID'
 ID 'CARRID' FIELD p_carrid
 ID 'ACTVT' FIELD '03'.
IF sy-subrc = 4.
 MESSAGE 'No authorization for carrier' TYPE 'E'.
ELSEIF sy-subrc <> 0.
 MESSAGE 'Error in authority check' TYPE 'A'.
ELSE.
 IF sy-ucomm = 'ONLI'.
 CALL SELECTION-SCREEN '0500'.
 ENDIF.
ENDIF.
AT SELECTION-SCREEN.
IF sy-dynnr = '0500'.
 IF s_conn IS INITIAL.
 MESSAGE 'Please enter values' TYPE 'W'.
 ELSE.
 SELECT *
 FROM sflight
 INTO TABLE sflight_tab
 WHERE carrid = p_carrid AND
 connid IN s_conn.
 IF sy-subrc <> 0.
 MESSAGE 'No flights found' TYPE 'E'.
 ENDIF.
 ENDIF.
ENDIF.
Main program
START-OF-SELECTION.

Modification of standard programs

Hi experts,
i want to modify cursor movment in the transaction COIB. Pls tell me how can i achieve this. Pls tell me the procedure and process required for this task.
Thank u.

hi,
folow these link for modification of standard programs...
http://www.sap-img.com/basis/manually-applying-the-oss-note.htm
http://www.sap-img.com/ab025.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/83/7a18c5de6e11d195460000e82de14a/content.htm
we can set the cursor position in two way's.
Static Cursor Position
To define the cursor position statically, enter the name of the required screen element in the Cursor position screen attribute in the Screen Painter.
Dynamic Cursor Position
To set the cursor position dynamically, use the following statement in an ABAP dialog module in the PBO event:
SET CURSOR FIELD <f> [OFFSET <off>].
<f> can be a literal or a variable containing the name of a screen element. You can use the OFFSET addition to place the cursor at a particular point within an input/output field.
regards,
Ashok reddy

How to determine logical database in a program?

Hello guys!
How to determine logical database in a program on Eclipse?
I have not found any options:
Thanks!

Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

I connected an external monitor to my MacBook Pro, but it doesn't open any programs. It Just sits there with a blank screen. How do I get it to open programs and act like a monitor?

Dear Jean:
It sounds like you are trying to get your external monitor to act as the primary viewing screen. For example it would have your Doc, Icons, Etc. In order to make the external monitor the primary screen you have to:
Open System Preferences.
Choose the Displays Icon
There will be several tabs to choose from pick Arrangement
Drag the toolbar to desired display
Let me know if this helps at all!
Lance

Hi very urgent How to improve the performence of the program

Hi all please tell me how to improve the performence of this program......
REPORT z03_gil010 NO STANDARD PAGE HEADING LINE-SIZE 130.
 INCLUDE *
INCLUDE: z00_bci010. " Gestion des anomalies.
 Déclaration des données *
 Tables de la bases de données *
TABLES:
 ekpo, " Poste document d'achat.
 lfa1, " Base fournisseurs (généralités).
 marc, " Données division de l'article.
 z03_bw_cmp1,
 eord, "Répertoire des sources appro. Achats
 eina, "Fiche infos-achats - données générales
 t024, "Groupes d'acheteurs
 tvarv. "FAE17345+
 Déclaration des données internes *
Déclaration de la table interne qui permet de recuperer les mois.
DATA: BEGIN OF itb_months OCCURS 12.
 INCLUDE STRUCTURE t247.
DATA: END OF itb_months.
Table pour récupération d'infos sur les divisions
DATA: BEGIN OF itb_t001w OCCURS 0,
 werks LIKE t001w-werks,
 fabkl LIKE t001w-fabkl," Clé du calendrier d'entreprise
 END OF itb_t001w.
Déclaration de la table interne contenant les infos sur l'adresse du
fournisseur.
DATA: BEGIN OF itb_adresse OCCURS 0,
 lifnr LIKE lfa1-lifnr, " Numéro de compte fournisseur.
 name1 LIKE lfa1-name1, " Nom 1.
 name2 LIKE lfa1-name2, " Nom 2.
 name3 LIKE lfa1-name3, " Nom 3.
 name4 LIKE lfa1-name4, " Nom 4.
 stras LIKE lfa1-stras, " N° de rue et nom de la rue.
 pstlz LIKE lfa1-pstlz, " Code postal.
 ort01 LIKE lfa1-ort01, " Localité.
 pfach LIKE lfa1-pfach, " Boîte postale.
 pstl2 LIKE lfa1-pstl2, " Code de la boîte postale.
 land1 LIKE lfa1-land1, " Clé de pays.
 landx LIKE t005t-landx, " Pays.
 spras LIKE lfa1-spras, " Code langue
END OF itb_adresse.
Déclaration d'une table interne pour les informations sur les
prévisions de commande.
DATA: BEGIN OF itb_prev_cde OCCURS 0,
 werks LIKE marc-werks, " Division
 idnlf LIKE eina-idnlf, " ADDsde ref article frn
 lifnr LIKE eord-lifnr, " N° fournisseur.
 ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
 dispo LIKE marc-dispo, " Code gestionnaire MRP
 matnr LIKE eord-matnr, " Article.
 maktx LIKE makt-maktx, " Désignation article.
 bstmi LIKE marc-bstmi, " Quantité de commande.
 men00 LIKE plaf-gsmng, " Quantité du mois en cours M.
 men01 LIKE plaf-gsmng, " Quantité pour le mois M+1.
 men02 LIKE plaf-gsmng, " Quantité pour le mois M+2.
 men03 LIKE plaf-gsmng, " Quantité pour le mois M+3.
 men04 LIKE plaf-gsmng, " Quantité pour le mois M+4.
 men05 LIKE plaf-gsmng, " Quantité pour le mois M+5.
 men06 LIKE plaf-gsmng. " Quantité pour le mois M+6.
DATA: END OF itb_prev_cde.
Structure de travail pour les commandes convernant les PFC
DATA str_pca_pfc LIKE itb_prev_cde.
*add sde
DATA str_eord_pfc LIKE itb_prev_cde.
Structure de travail pour les prévisons PFC
DATA str_prev_pfc LIKE itb_prev_cde.
Déclaration d'une table interne pour les informations sur le
portefeuille des commandes d'achat.
DATA: BEGIN OF itb_pca OCCURS 0,
 werks LIKE ekpo-werks, " Division
 idnlf LIKE eina-idnlf, " ADDsde ref article frn
 lifnr LIKE eord-lifnr, " N° fournisseur.
 ekgrp LIKE marc-ekgrp, " Groupe d'acheteurs
 dispo LIKE marc-dispo, " Code gestionnaire MRP
 matnr LIKE eord-matnr, " Article.
 maktx LIKE makt-maktx, " Désignation article.
 ebeln LIKE ekes-ebeln, " Numéro du document d'achat.
 ebelp LIKE ekes-ebelp, " Numéro de poste du document d'achat.
 slfdt LIKE eket-slfdt, " Date de livraison statistique
 eindt LIKE ekes-eindt, " Date de livraison indiquée dans la
 " confirmation de la cde.
 menge LIKE ekes-menge, " Quantité indiquée dans la confirma-
 " tion de la commande.
 attdu LIKE eket-wemng, " Portefeuille fournisseur.
 netpr LIKE ekpo-brtwr, " Prix net du document d'achat dans
 " la devise du document.
 rtard TYPE i, " Retard en jours ouvres.
 wemng LIKE eket-wemng, " Quantité de l'entrée de marchandise.
 bldat LIKE mkpf-bldat, " Date inscrite sur la pièce/sur le
 " document.
 qtran LIKE ekes-menge, " Quantité en transit.
 dtran LIKE ekes-eindt. " Date du dernier avis de transit.
DATA: END OF itb_pca.
DATA: w_i TYPE i, "Compteur
 w_i_char(1) TYPE c, "Texte pour récupérer compteur
 w_nm_zone(20) TYPE c, "Nom zone pour assign au field-symbols
 w_nb_j TYPE i, "Nb de jours ouvrés jusqu'à fin mois
 w_nb_j_tot TYPE i. "Nb de jours ouvrés du mois
FIELD-SYMBOLS: TYPE ANY.
Déclaration d'une table contenant les fiches info achat.
DATA: BEGIN OF itb_eina OCCURS 0,
 matnr LIKE eina-matnr,
 lifnr LIKE eina-lifnr,
 idfnl LIKE eina-idnlf.
DATA: END OF itb_eina.
Déclaration d'une table contenant les infos groupe acheteur.
*DATA: BEGIN OF itb_t024 OCCURS 0,
 ekgrp LIKE t024-ekgrp,
 eknam LIKE t024-eknam,
 ektel LIKE t024-ektel,
 telfx LIKE t024-telfx.
*DATA: END OF itb_t024.
Déclaration d'une table pour le transfert du fichier.
DATA: BEGIN OF itb_transfert OCCURS 0,
 col00(8), "division
 col00bis(20), "Reference article
 col01(18), "No article
 col02(45), "libelle article
 col021(17), "Groupe acheteur
 col022(13), "gestionnaire
 col03(17), "qte commandée ou No de commande
 col04(13), "Mois 1 ou No poste cde
 col05(20), "Mois 2 ou délai initial
 col06(33), "Mois 3 ou délai négocié
 col07(13), "Mois 4 ou qté cdée
 col08(13), "Mois 5 ou qté attendue
 col09(13), "Mois 6 ou Montant attendu
 col10(13), "Mois 7 ou retard
 col11(13), "qte partielle livree
 col12(13), "date livraison partielle
 col13(13), "qté en transit
 col14(13). "date
DATA: END OF itb_transfert.
Déclaration d'une table contenant la liste des fournisseurs.
DATA: BEGIN OF itb_lifnr OCCURS 0,
 werks LIKE marc-werks,
 idfnl LIKE eina-idnlf,
 lifnr LIKE eord-lifnr,
 ekgrp LIKE marc-ekgrp,
 spras LIKE lfa1-spras,
 eknam LIKE t024-eknam,
 ektel LIKE t024-ektel,
 telfx LIKE t024-telfx.
DATA: END OF itb_lifnr.
Déclaration d'une structure pour la selection dans la table MSEG.
DATA : BEGIN OF itb_mseg OCCURS 0,
 mblnr LIKE mseg-mblnr,
 mjahr LIKE mseg-mjahr,
 ebeln LIKE mseg-ebeln,
 ebelp LIKE mseg-ebelp,
 END OF itb_mseg.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekpo OCCURS 0,
 lifnr LIKE ekko-lifnr,
 ebeln LIKE ekpo-ebeln,
 ebelp LIKE ekpo-ebelp,
 menge LIKE ekpo-menge,
 bpumz LIKE ekpo-bpumz,
 bpumn LIKE ekpo-bpumn,
 matnr LIKE ekpo-matnr,
 werks LIKE ekpo-werks,
 netpr LIKE ekpo-netpr,
 peinh LIKE ekpo-peinh, "Base de prix FAE17345+
 ekgrp LIKE ekko-ekgrp, "AFT++
 dispo LIKE marc-dispo, "AFT++
 END OF itb_ekpo.
déclaration d'une structure pour la selection dans EKPO.
DATA : BEGIN OF itb_ekko OCCURS 0,
 ebeln LIKE ekko-ebeln,
 lifnr LIKE ekko-lifnr,
 spras LIKE ekko-spras,
 END OF itb_ekko.
déclaration d'une structure pour la selection dans EKES.
DATA : BEGIN OF itb_ekes OCCURS 0,
 ebeln LIKE eket-ebeln,
 ebelp LIKE eket-ebelp,
 ebtyp LIKE ekes-ebtyp,
 eindt LIKE ekes-eindt,
 menge LIKE ekes-menge,
 dabmg LIKE ekes-dabmg,
 etens LIKE ekes-etens,
 END OF itb_ekes.
déclaration d'une structure pour la selection dans EKET
DATA : BEGIN OF itb_eket OCCURS 0,
 ebeln LIKE eket-ebeln,
 ebelp LIKE eket-ebelp,
 menge LIKE eket-menge,
 wemng LIKE eket-wemng,
 eindt LIKE eket-eindt,
 slfdt LIKE eket-slfdt,
 END OF itb_eket.
déclaration d'une structure pour la selection dans MKPF.
DATA : BEGIN OF itb_mkpf OCCURS 0,
 mblnr LIKE mkpf-mblnr,
 mjahr LIKE mkpf-mjahr,
 bldat LIKE mkpf-bldat,
 END OF itb_mkpf.
Déclaration d'une structure pour la sélection dans EORD.
DATA : BEGIN OF itb_eord OCCURS 0,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
 lifnr LIKE eord-lifnr,
 ekgrp LIKE marc-ekgrp,
 dispo LIKE marc-dispo, "DE3K924352
 disls LIKE marc-disls,
 bstfe LIKE marc-bstfe,
 bstrf LIKE marc-bstrf,
 bstmi LIKE marc-bstmi,
 bstma LIKE marc-bstma,
 END OF itb_eord.
DATA : BEGIN OF itb_eordw OCCURS 0.
 INCLUDE STRUCTURE itb_eord.
DATA : END OF itb_eordw.
Déclaration d'une structure pour la sélection dans MAKT.
DATA : BEGIN OF itb_makt OCCURS 0,
 matnr LIKE makt-matnr,
 spras LIKE makt-spras,
 maktx LIKE makt-maktx,
 END OF itb_makt.
Déclaration d'une structure pour la sélection dans EBAN.
DATA : BEGIN OF itb_eban OCCURS 0,
 matnr LIKE eban-matnr,
 werks LIKE eban-werks,
 flief LIKE eban-flief,
 lfdat LIKE eban-lfdat,
 menge LIKE eban-menge,
 bsmng LIKE eban-bsmng,
 webaz LIKE eban-webaz,
 ekgrp LIKE eban-ekgrp,
 ebeln LIKE eban-ebeln,
 banfn LIKE eban-banfn,
 bnfpo LIKE eban-bnfpo, "DB3K900702+
 END OF itb_eban.
Déclaration d'une structure pour la sélection dans PLAF.
DATA : BEGIN OF itb_plaf OCCURS 0,
 plnum LIKE plaf-plnum, "DB3K900702+
 matnr LIKE plaf-matnr,
 plwrk LIKE plaf-plwrk,
 flief LIKE plaf-flief,
 pedtr LIKE plaf-pedtr,
 gsmng LIKE plaf-gsmng,
 webaz LIKE plaf-webaz,
 END OF itb_plaf.
Déclaration d'une structure pour la sélection dans MARC.
DATA : BEGIN OF itb_marc OCCURS 0,
 matnr LIKE marc-matnr,
 werks LIKE marc-werks,
 disls LIKE marc-disls,
 bstrf LIKE marc-bstrf,
 bstmi LIKE marc-bstmi,
 bstma LIKE marc-bstma,
 bstfe LIKE marc-bstfe,
 ekgrp LIKE marc-ekgrp,
 dispo LIKE marc-dispo,
 END OF itb_marc.
DATA : BEGIN OF itb_marc_eord OCCURS 0,
 matnr LIKE marc-matnr,
 werks LIKE marc-werks,
 strgr LIKE marc-strgr, "groupe de stratégie planif
 END OF itb_marc_eord.
DATA : BEGIN OF itb_z03_bw_cmp1 OCCURS 0,
 matnr LIKE z03_bw_cmp1-matnr,
 werks LIKE z03_bw_cmp1-werks,
 pdatu LIKE z03_bw_cmp1-pdatu,
 plnmg LIKE z03_bw_cmp1-plnmg,
 END OF itb_z03_bw_cmp1.
Begin change BNI <DE3K937051>
DATA : BEGIN OF itb_z03_bw_cmp2 OCCURS 0,
 matnr LIKE z03_bw_cmp2-matnr,
 werks LIKE z03_bw_cmp2-werks,
 pdatu LIKE z03_bw_cmp2-pdatu,
 plnmg LIKE z03_bw_cmp2-plnmg,
 END OF itb_z03_bw_cmp2.
*End change BNI
DATA : BEGIN OF str_index1,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
 END OF str_index1.
DATA : BEGIN OF str_index2,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
 END OF str_index2.
DATA : BEGIN OF str_index3_eord,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
 END OF str_index3_eord.
DATA : BEGIN OF str_index4,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
 END OF str_index4.
DATA : BEGIN OF str_index5,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
END OF str_index5.
DATA : BEGIN OF str_index6,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
END OF str_index6.
DATA : BEGIN OF str_index7,
 matnr LIKE eord-matnr,
 werks LIKE eord-werks,
END OF str_index7.
Déclaration des variables de debut et de fin de mois.
DATA: w_debut_mois LIKE sy-datum,
 w_debut_periode LIKE sy-datum,
 w_fin_mois LIKE sy-datum,
 w_fin_periode LIKE sy-datum.
Déclaration des variables pour les dates.
DATA: w_date0 LIKE sy-datum,
 w_date1 LIKE sy-datum,
 w_date2 LIKE sy-datum,
 w_date3 LIKE sy-datum,
 w_date4 LIKE sy-datum,
 w_date5 LIKE sy-datum,
 w_date6 LIKE sy-datum,
 w_datejour LIKE sy-datum, "FAE15269
 w_dat_da LIKE eban-lfdat,
 w_dat_op LIKE plaf-pedtr,
 w_mois0 LIKE t247-ltx,
 w_mois1 LIKE t247-ltx,
 w_mois2 LIKE t247-ltx,
 w_mois3 LIKE t247-ltx,
 w_mois4 LIKE t247-ltx,
 w_mois5 LIKE t247-ltx,
 w_mois6 LIKE t247-ltx,
 w_lendemain LIKE sy-datum. "FAE17345+
Temoin d'un AR dans la commande d'achat.
DATA: w_temoin_ar.
Numéro de la confirmation de la commande
DATA : w_etens LIKE ekes-etens.
Déclaration des variables pour le nom des fichiers.
DATA: w_nom_fichier LIKE rlgrap-filename,
 w_fichier LIKE rlgrap-filename,
 w_racine LIKE rlgrap-filename,
 w_file LIKE rlgrap-filename.
Déclaration d'une table interne pour le transfert.
DATA: BEGIN OF itb_trans OCCURS 0,
 w_ligne(320).
DATA: END OF itb_trans.
Déclaration d'une variable pour rechercher les enregistrements vides.
DATA: w_compteur TYPE i,
 w_compteur1 TYPE i,
 w_compteur2 TYPE i,
 w_retard TYPE i, " Retard en jours ouvres.
 w_trouve_pfc TYPE c, "addsde
 w_trouve_pfs TYPE c, "+DE3K937051
 w_trouve TYPE c.
*Index pour les LOOP
DATA : w_index_ekpo LIKE sy-tabix,
 w_index_ekes LIKE sy-tabix,
 w_index_eket LIKE sy-tabix,
 w_index_mseg LIKE sy-tabix,
 w_index_eban LIKE sy-tabix,
 w_index_plaf LIKE sy-tabix,
 w_index_pca LIKE sy-tabix,
 w_index_z03_bw_cmp1 LIKE sy-tabix,
 w_index_z03_bw_cmp2 LIKE sy-tabix."+DE3K937051
RANGES : r_type_pfs FOR marc-strgr.
*fichier sur serveur +EDR231003
DATA : w_chemin LIKE filename-fileintern, "nom du fichier
 w_date_fichier(12) TYPE c, "Date format DD_MM_AA
 w_csv(307) TYPE c. "ligne du fichier format CSV
CONSTANTS: k_imputation_m LIKE eban-knttp VALUE 'M'. "FAE19001+
 Description de l écran de sélection *
 Paramètres "UTILISATION" *
Ouverture d'un block de sélection pour le(s) fournisseur(s).
SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME TITLE text-bl1.
Sélection division(s)
SELECT-OPTIONS: s_werks FOR ekpo-werks.
Sélection fournisseur(s).
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr OBLIGATORY.
Sélection du Groupe d'acheteur
*SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp. "-FAE26446
*SELECT-OPTIONS: s_dispo FOR marc-dispo. "-FAE26446
SELECTION-SCREEN END OF BLOCK block1.
FAE 26446 : ajout
SELECTION-SCREEN BEGIN OF BLOCK block3 WITH FRAME TITLE text-bl3.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_ekgrp RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-001 FOR FIELD p_ekgrp.
SELECT-OPTIONS: s_ekgrp FOR marc-ekgrp.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETER p_dispo RADIOBUTTON GROUP g3.
SELECTION-SCREEN COMMENT 5(24) text-002 FOR FIELD p_dispo.
SELECT-OPTIONS: s_dispo FOR marc-dispo.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK block3.
FAE 26446 : fin ajout
 Paramètres "SYSTEME" *
Saut de 2 lignes.
SELECTION-SCREEN: SKIP 2.
Ouverture d'un block de sélection pour l'adresse physique du fichier.
SELECTION-SCREEN BEGIN OF BLOCK block2 WITH FRAME TITLE text-bl2.
PARAMETERS: p_pc RADIOBUTTON GROUP rad1 DEFAULT 'X', "+EDR231003
 p_fic_pc LIKE rlgrap-filename. "+EDR231003
SELECTION-SCREEN SKIP. "+EDR231003
PARAMETERS : p_serve RADIOBUTTON GROUP rad1, "+EDR231003
 p_fic_se LIKE filename-fileintern "+EDR231003
 DEFAULT 'Z03_PREV_COMMANDES'. "+EDR231003
SELECTION-SCREEN END OF BLOCK block2.
 Logique de traitement *
 INITIALIZATION *
INITIALIZATION.
Date du jour
MOVE sy-datum TO w_datejour. "FAE15269
Gestion des anomalies.
MOVE text-lb1 TO w_lb_traitement.
PERFORM f930_init USING sy-cprog '30'.
Fin de la gestions des anomalies.
Récuperation des mois dans la table interne 'ITB_MONTHS'.
CALL FUNCTION 'MONTH_NAMES_GET'
 EXPORTING
 language = sy-langu
 TABLES
 month_names = itb_months
 EXCEPTIONS
 month_names_not_found = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Récupération des differentes periodes.
PERFORM f100_recuperation_date TABLES itb_months.
Récupération du debut du mois.
CONCATENATE sy-datlo(6) '01' INTO w_debut_mois.
MOVE: w_debut_mois TO w_debut_periode.
Récupération du dernier jour du mois.
CALL FUNCTION 'LAST_DAY_OF_MONTHS'
 EXPORTING
 day_in = sy-datlo
 IMPORTING
 last_day_of_month = w_fin_mois
 EXCEPTIONS
 day_in_no_date = 1
 OTHERS = 2.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
 TOP-OF-PAGE *
TOP-OF-PAGE.
CALL FUNCTION 'Z_00_BC_TOP_OF_PAGE'
 EXPORTING
 p_linsz = k_ligne
 p_pagno = sy-pagno
 p_prog = sy-cprog
 p_projet = k_projet
 p_societe = k_societe
 p_sujet = sy-title.
 END-OF-PAGE *
END-OF-PAGE.
 AT SELECTION-SCREEN *
FAE 26446 : ajout
AT SELECTION-SCREEN ON BLOCK block3.
IF NOT ( s_ekgrp IS INITIAL )
AND NOT ( s_dispo IS INITIAL ).
 MESSAGE e394(z03_mm).
ENDIF.
IF p_ekgrp = 'X'.
 IF s_ekgrp IS INITIAL.
 MESSAGE e395(z03_mm).
 ENDIF.
ELSE.
 IF s_dispo IS INITIAL.
 MESSAGE e396(z03_mm).
 ENDIF.
ENDIF.
fae26446 fin ajout
AT SELECTION-SCREEN ON BLOCK block2.
IF p_pc = 'X'.
 IF p_fic_pc IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
 MESSAGE e021(z03_mm).
 ENDIF.
ELSE.
 IF p_fic_se IS INITIAL.
*Attention, il n'y a aucune adresse de sauvegarde pour le(s) fichier(s)
 MESSAGE e021(z03_mm).
 ENDIF.
ENDIF.
Création du matchcode pour la selection du fichier local.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fic_pc.
CALL FUNCTION 'WS_FILENAME_GET'
 EXPORTING
 def_filename = p_fic_pc
 def_path = 'C:'
 mask = text-ma1
 mode = 'S'
 title = text-sel
 IMPORTING
 filename = p_fic_pc
 EXCEPTIONS
 inv_winsys = 1
 no_batch = 2
 selection_cancel = 3
 selection_error = 4
 OTHERS = 5.
IF sy-subrc NE 0 AND sy-subrc NE 3.
 MESSAGE e032(z03_mm).
ENDIF.
 START-OF-SELECTION *
START-OF-SELECTION.
PERFORM select_donnees.
=================================================
Liste des ARTICLES impactés pour les prévisions *
=================================================
===================================
PORTEFEUILLE DE COMMANDES D'ACHAT *
===================================
Construction itb_pca à partir de EKKO/EKPO.
w_index_ekpo = 1.
w_index_ekes = 1.
w_index_eket = 1.
w_index_mseg = 1.
SORT itb_ekko BY ebeln. "-FAE26446
SORT itb_ekpo BY ebeln ebelp.
SORT itb_makt BY matnr spras.
SORT itb_eket BY ebeln ebelp.
SORT itb_ekes BY ebeln ebelp.
SORT itb_mseg BY ebeln ebelp.
SORT itb_mkpf BY mblnr mjahr.
SORT itb_marc BY matnr werks. "+FAE26446
FAE 26446 remplacement
LOOP AT itb_ekko.
 LOOP AT itb_ekpo.
 FROM w_index_ekpo.
 IF itb_ekko-ebeln = itb_ekpo-ebeln.
LOOP AT itb_ekpo.
 READ TABLE itb_marc WITH KEY
 matnr = itb_ekpo-matnr
 werks = itb_ekpo-werks BINARY SEARCH.
 CHECK sy-subrc = 0.
FAE 26446 fin remplacement
 itb_pca-ebeln = itb_ekpo-ebeln.
 itb_pca-ebelp = itb_ekpo-ebelp.
itb_pca-lifnr = itb_ekko-lifnr. "-FAE26446
 itb_pca-lifnr = itb_ekpo-lifnr. "+FAE26446
 itb_pca-ekgrp = itb_ekpo-ekgrp. "+FAE26446
 itb_pca-dispo = itb_ekpo-dispo. "+FAE26446
 itb_pca-matnr = itb_ekpo-matnr.
 itb_pca-werks = itb_ekpo-werks.
Recherche du libellé article
 READ TABLE itb_makt
 WITH KEY matnr = itb_ekpo-matnr
 spras = text-fra
 BINARY SEARCH.
 IF sy-subrc = 0.
 itb_pca-maktx = itb_makt-maktx.
 ELSE.
 READ TABLE itb_makt
 WITH KEY matnr = itb_ekpo-matnr
 spras = text-ang
 BINARY SEARCH.
 IF sy-subrc = 0.
 itb_pca-maktx = itb_makt-maktx.
 ENDIF.
 ENDIF.
 IF NOT itb_ekpo-bpumn IS INITIAL.
 itb_pca-menge = itb_ekpo-menge * itb_ekpo-bpumz /
 itb_ekpo-bpumn.
 ENDIF.
Sélect° ds la table EKES des dates de livraisons et des qtés
en transit
 CLEAR w_temoin_ar.
 CLEAR w_etens.
 LOOP AT itb_ekes
 FROM w_index_ekes.
 IF itb_ekes-ebeln = itb_ekpo-ebeln
 AND itb_ekes-ebelp = itb_ekpo-ebelp.
 IF itb_ekes-ebtyp = text-arn.
 itb_pca-eindt = itb_ekes-eindt.
 w_temoin_ar = 'X'.
 ELSE.
 Si c'est une qté en transit alors on recupere
 la quantité et la date.
 IF itb_ekes-dabmg < itb_ekes-menge.
 itb_pca-qtran = itb_pca-qtran + itb_ekes-menge -
 itb_ekes-dabmg.
 ENDIF.
 IF itb_ekes-etens > w_etens.
 w_etens = itb_ekes-etens.
 itb_pca-dtran = itb_ekes-eindt.
 ENDIF.
 ENDIF.
 ELSEIF itb_ekes-ebeln > itb_ekpo-ebeln
 OR ( itb_ekes-ebeln = itb_ekpo-ebeln
 AND itb_ekes-ebelp > itb_ekpo-ebelp ).
 w_index_ekes = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
S'il n'y a pas d'AR alors récupérat° de la date livraison dans EKET.
 LOOP AT itb_eket
 FROM w_index_eket.
 IF itb_eket-ebeln = itb_ekpo-ebeln
 AND itb_eket-ebelp = itb_ekpo-ebelp.
 IF w_temoin_ar IS INITIAL.
 itb_pca-eindt = itb_eket-eindt.
 ENDIF.
 itb_pca-slfdt = itb_eket-slfdt.
 Calcul du portefeuille fournisseur à partir de la
 qté commandée et la qté reçue
 itb_pca-attdu = itb_pca-attdu + itb_eket-menge -
 itb_eket-wemng.
 Calcul du montant du poste
 itb_pca-netpr = itb_ekpo-netpr * itb_pca-attdu.
 IF itb_ekpo-peinh NE 0.
 itb_pca-netpr = itb_pca-netpr / itb_ekpo-peinh.
 ENDIF.
 Calcul quantité réceptionnée.
 itb_pca-wemng = itb_pca-wemng + itb_eket-wemng.
 Calcul du retard en nombre de jours calendaires
 Le calcul du retard ne doit pas prendre en compte
 le jour de livraison
 ADD 1 TO itb_eket-eindt.
 IF NOT itb_pca-attdu IS INITIAL
 AND itb_eket-eindt LT sy-datum.
 Calcul du retard en nombre de jours ouvrés
 CLEAR w_retard.
 CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
 EXPORTING
 date_deb = itb_eket-eindt
 date_fin = sy-datum
 IMPORTING
 jours = w_retard.
 itb_pca-rtard = itb_pca-rtard + w_retard .
 ENDIF.
 ELSEIF itb_eket-ebeln > itb_ekpo-ebeln
 OR ( itb_eket-ebeln = itb_ekpo-ebeln
 AND itb_eket-ebelp > itb_ekpo-ebelp ).
 w_index_eket = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
Recherche de la derniere date de livraison.
 LOOP AT itb_mseg
 FROM w_index_mseg.
 IF itb_mseg-ebeln = itb_ekpo-ebeln
 AND itb_mseg-ebelp = itb_ekpo-ebelp.
 READ TABLE itb_mkpf
 WITH KEY mblnr = itb_mseg-mblnr
 mjahr = itb_mseg-mjahr
 BINARY SEARCH.
 IF sy-subrc = 0.
 IF itb_mkpf-bldat > itb_pca-bldat.
 itb_pca-bldat = itb_mkpf-bldat.
 ENDIF.
 ENDIF.
 ELSEIF itb_mseg-ebeln > itb_ekpo-ebeln
 OR ( itb_mseg-ebeln = itb_ekpo-ebeln
 AND itb_mseg-ebelp > itb_ekpo-ebelp ).
 w_index_mseg = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
 APPEND itb_pca.
 CLEAR itb_pca.
FAE26446 suppression parag. suivant
 ELSEIF itb_ekpo-ebeln > itb_ekko-ebeln.
 w_index_ekpo = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
Fin FAE26446
ENDLOOP.
=========================
PREVISIONS DE COMMANDES *
=========================
SORT itb_eord BY matnr werks lifnr ekgrp.
SORT itb_eban BY matnr werks flief ekgrp.
SORT itb_plaf BY matnr plwrk flief.
SORT itb_z03_bw_cmp1 BY matnr werks.
SORT itb_z03_bw_cmp2 BY matnr werks."+DE3K937051
SORT itb_pca BY matnr werks lifnr.
w_index_eban = 1.
w_index_plaf = 1.
w_index_z03_bw_cmp1 = 1.
w_index_pca = 1.
w_index_z03_bw_cmp2 = 1."+DE3K937051
Remplissage de la table des prévisions de commande.
LOOP AT itb_eord.
 CLEAR: str_prev_pfc,
 w_trouve.
 MOVE-CORRESPONDING itb_eord TO str_index1.
 MOVE-CORRESPONDING itb_eord TO str_index3_eord.
 MOVE-CORRESPONDING itb_eord TO itb_prev_cde.
Recherche dans table division/article (MARC) afin de déterminer si
article PFS (prod fabriqué à stock) ou PFC (Prod fabriqué sur cde)
 AT NEW werks.
 READ TABLE itb_marc_eord
 WITH KEY matnr = itb_eord-matnr
 werks = itb_eord-werks
 BINARY SEARCH.
 IF sy-subrc NE 0.
 CLEAR itb_marc_eord.
 ENDIF.
 ENDAT.
a - Prévisions pour les PFS : DA + OP *
*Calcul des quantités de commande.
 IF itb_eord-disls = text-tl1.
 itb_prev_cde-bstmi = itb_eord-bstfe.
 ELSEIF itb_eord-disls = text-tl2
 OR itb_eord-disls = text-tl3.
 IF itb_eord-bstrf NE 0
 AND itb_eord-bstmi = 0
 AND itb_eord-bstma = 0.
 itb_prev_cde-bstmi = itb_eord-bstrf.
 ELSEIF itb_eord-bstrf NE 0
 AND itb_eord-bstmi NE 0.
 itb_prev_cde-bstmi = itb_eord-bstmi.
 ELSEIF itb_eord-bstrf = itb_eord-bstma
 AND itb_eord-bstrf NE 0
 AND itb_eord-bstmi = 0.
 itb_prev_cde-bstmi = itb_eord-bstma.
 ENDIF.
 ENDIF.
si article PFS (Prod fabriqué à stock) recherche des
demandes d'achat ou ordres planfiés
 IF itb_marc_eord-strgr IN r_type_pfs.
Récupérat° calendrier de la division pour calcul correct lors de
l'ajout de eban-webaz ou plaf-webaz jours ouvrés
 CLEAR w_trouve_pfs ."+DE3K937051
 READ TABLE itb_t001w
 WITH KEY werks = itb_eord-werks
 BINARY SEARCH.
 IF sy-subrc = 0.
 LOOP AT itb_eban
 FROM w_index_eban.
 MOVE-CORRESPONDING itb_eban TO str_index2.
 IF str_index1 = str_index2.
 w_trouve_pfs = 'X'."+DE3K937051
 si qte commandées pour la DA < quantité de la DA
 IF itb_eban-bsmng < itb_eban-menge.
 ajout de quantité de la DA - qte commandée pour la DA
 PERFORM affect_da.
 ENDIF.
 ELSEIF str_index2 > str_index1.
 w_index_eban = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
 ENDIF.
 ajout des quantité des OP (ordres planifiés)
 LOOP AT itb_plaf
 FROM w_index_plaf.
 MOVE-CORRESPONDING itb_plaf TO str_index4.
 str_index4-werks = itb_plaf-plwrk.
 str_index4-lifnr = itb_plaf-flief.
 IF str_index4 = str_index3_eord.
 Ajout de webaz jours ouvrés à pedtr
 CALL FUNCTION 'Z_03_MM_ADD_TO_FACTORYDATE'
 EXPORTING
 i_date = itb_plaf-pedtr
 i_calendar_id = itb_t001w-fabkl
 i_nb_days = itb_plaf-webaz
 IMPORTING
 o_date = w_dat_op
 EXCEPTIONS
 conv_error = 1
 OTHERS = 2.
 IF sy-subrc
 If forecasts found in Z03_BW_CMP2 for the article
 IF w_trouve_pfs = 'X'."-DE3K937602
Recalculation prev month M in fct of Nb of wrought days of the month
 IF NOT itb_prev_cde-men00 IS INITIAL.
 one does not hold any more account of the day in progress
 w_lendemain = w_date0 + 1.
 CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
 CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
 EXPORTING
 date_deb = w_lendemain
 date_fin = w_fin_mois
 IMPORTING
 jours = w_nb_j.
 CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
 EXPORTING
 date = w_lendemain
 IMPORTING
 jours = w_nb_j_tot.
 itb_prev_cde-men00 = itb_prev_cde-men00 * w_nb_j / w_nb_j_tot
*CLA DE3K925301 FAE27197
*to round has the higher entirety
 itb_prev_cde-men00 = ceil( itb_prev_cde-men00 ). "DE3K938206-
 ENDIF.
 ENDIF."-DE3K937602
*End change BNI
b - Prévisions pour les PFC (Z03_BW_CMP1 puis rééquilibrage) *
Recherche des previsions dans Z03_BW_CMP1
si article PFC (Prod fabriqué sur cde) recherche des prévisions
 IF NOT itb_marc_eord-strgr IN r_type_pfs.
 CLEAR str_prev_pfc.
 MOVE-CORRESPONDING itb_eord TO str_prev_pfc.
 CLEAR w_trouve_pfc .
 LOOP AT itb_z03_bw_cmp1
 FROM w_index_z03_bw_cmp1.
 MOVE-CORRESPONDING itb_z03_bw_cmp1 TO str_index7.
 MOVE-CORRESPONDING itb_eord TO str_index6.
 IF str_index6 = str_index7.
 si on trouve des prévisions dans z03_bw_cmp1 pour la source
 d'appro eord alors c'est un article PFC
 w_trouve_pfc = 'X'.
 CASE itb_z03_bw_cmp1-pdatu+0(6).
 WHEN w_date0+0(6).
 str_prev_pfc-men00 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date1+0(6).
 str_prev_pfc-men01 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date2+0(6).
 str_prev_pfc-men02 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date3+0(6).
 str_prev_pfc-men03 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date4+0(6).
 str_prev_pfc-men04 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date5+0(6).
 str_prev_pfc-men05 = itb_z03_bw_cmp1-plnmg.
 WHEN w_date6+0(6).
 str_prev_pfc-men06 = itb_z03_bw_cmp1-plnmg.
 WHEN OTHERS.
 ENDCASE.
 ELSEIF str_index7 > str_index6.
 w_index_z03_bw_cmp1 = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP.
*Begin change BNI
 Si des prévisions trouvées dans Z03_BW_CMP1 pour l'article
 IF w_trouve_pfc = 'X'.
 Recalcul prev mois M en fct du nb de jours ouvrés du mois
 IF NOT str_prev_pfc-men00 IS INITIAL.
 on ne tient plus compte du jour en cours
 w_lendemain = w_date0 + 1.
 CLEAR:w_nb_j,w_nb_j_tot. "DE3K938206+
 CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_PERIOD'
 EXPORTING
 date_deb = w_lendemain
 date_fin = w_fin_mois
 IMPORTING
 jours = w_nb_j.
 CALL FUNCTION 'Z_00_BC_WORKDAYS_PER_MONTH'
 EXPORTING
 date = w_lendemain
 IMPORTING
 jours = w_nb_j_tot.
 str_prev_pfc-men00 = str_prev_pfc-men00 * w_nb_j / w_nb_j_tot.
*CLA DE3K925301 FAE27197
*arrondir a l'entier supèrieur
 str_prev_pfc-men00 = ceil( str_prev_pfc-men00 ).
 ENDIF.
 Equilibrage PFC : commande/prévision du mois
 Recherche COMMANDES cumulées pour M à M+6
 CLEAR str_pca_pfc.
 LOOP AT itb_pca
 FROM w_index_pca.
 MOVE-CORRESPONDING itb_pca TO str_index5.
 IF str_index5 = str_index3_eord.
 IF NOT itb_pca-menge IS INITIAL.
 CASE itb_pca-eindt+0(6).
 WHEN w_date0+0(6).
 IF itb_pca-eindt >= w_date0.
 str_pca_pfc-men00 = str_pca_pfc-men00 + itb_pca-menge.
 ENDIF.
 WHEN w_date1+0(6).
 str_pca_pfc-men01 = str_pca_pfc-men01 + itb_pca-menge.
 WHEN w_date2+0(6).
 str_pca_pfc-men02 = str_pca_pfc-men02 + itb_pca-menge.
 WHEN w_date3+0(6).
 str_pca_pfc-men03 = str_pca_pfc-men03 + itb_pca-menge.
 WHEN w_date4+0(6).
 str_pca_pfc-men04 = str_pca_pfc-men04 + itb_pca-menge.
 WHEN w_date5+0(6).
 str_pca_pfc-men05 = str_pca_pfc-men05 + itb_pca-menge.
 WHEN w_date6+0(6).
 str_pca_pfc-men06 = str_pca_pfc-men06 + itb_pca-menge.
 ENDCASE.
 ENDIF."NOT itb_pca-menge IS INITIAL
 ELSEIF str_index5 > str_index3_eord.
 w_index_pca = sy-tabix.
 EXIT.
 ENDIF.
 ENDLOOP."itb_pca
*. Equilibrer commande / prévision des mois : diminuer la quantité de
prévision de chaque mois par le portefeuille de commande client du
mois*. Si ce solde est négatif alors lui donner la valeur 0.
 w_i = 0.
 Ajustement commandes/prévisions pour les mois M à M+6
 WHILE w_i .
 Pour un mois, SI Prévisions > Commandes en cours
 IF .
 Prévisions = Prévisions - Commandes en cours
 = 0.
 ENDIF.
 On passe au mois suivant
 w_i = w_i + 1.
 ENDWHILE.
 MOVE str_prev_pfc-men00 TO itb_prev_cde-men00.
 MOVE str_prev_pfc-men01 TO itb_prev_cde-men01.
 MOVE str_prev_pfc-men02 TO itb_prev_cde-men02.
 MOVE str_prev_pfc-men03 TO itb_prev_cde-men03.
 MOVE str_prev_pfc-men04 TO itb_prev_cde-men04.
 MOVE str_prev_pfc-men05 TO itb_prev_cde-men05.
 MOVE str_prev_pfc-men06 TO itb_prev_cde-men06.

Hi
You check in SM50 by executing the programing, You will come to know which select is taking more time and accordingly you modify that select.
You can do SQL trace and Run time analysis and analyse and see.
check this and use
1) Dont use nested select statements
2) If possible use for all entries in addition
3) In the where addition make sure you give all the primary key
4) Use Index for the selection criteria.
5) You can also use inner joins
6) You can try to put the data from the first select statement into an Itab and then in order to select the data from the second table use for all entries in.
7) Use the runtime analysis SE30 and SQL Trace (ST05) to identify the performance and also to identify where the load is heavy, so that you can change the code accordingly
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d0db4c9-0e01-0010-b68f-9b1408d5f234
ABAP performance depends upon various factors and in devicded in three parts:
1. Database
2. ABAP
3. System
Run Any program using SE30 (performance analys) to improve performance refer to tips and trics section of SE30, Always remember that ABAP perfirmance is improved when there is least load on Database.
u can get an interactive grap in SE30 regarding this with a file.
also if u find runtime of parts of codes then use :
Switch on RTA Dynamically within ABAP Code
*To turn runtim analysis on within ABAP code insert the following code
SET RUN TIME ANALYZER ON.
*To turn runtim analysis off within ABAP code insert the following code
SET RUN TIME ANALYZER OFF.
Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
Avoid for all entries in JOINS
Try to avoid joins and use FOR ALL ENTRIES.
Try to restrict the joins to 1 level only ie only for tables
Avoid using Select *.
Avoid having multiple Selects from the same table in the same object.
Try to minimize the number of variables to save memory.
The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
Avoid creation of index as far as possible
Avoid operators like <>, > , < & like % in where clause conditions
Avoid select/select single statements in loops.
Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
Avoid using ORDER BY in selects
Avoid Nested Selects
Avoid Nested Loops of Internal Tables
Try to use FIELD SYMBOLS.
Try to avoid into Corresponding Fields of
Avoid using Select Distinct, Use DELETE ADJACENT
Check the following Links
Re: performance tuning
Re: Performance tuning of program
http://www.sapgenie.com/abap/performance.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
check the below link
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
See the following link if it's any help:
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Check also http://service.sap.com/performance
and
books like
http://www.sap-press.com/product.cfm?account=&product=H951
http://www.sap-press.com/product.cfm?account=&product=H973
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.thespot4sap.com/Articles/SAPABAPPerformanceTuning_PerformanceAnalysisTools.asp
Performance tuning for Data Selection Statement
http://www.sap-img.com/abap/performance-tuning-for-data-selection-statement.htm
Debugger
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
Run Time Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617cafe68c11d2b2ab080009b43351/content.htm
SQL trace
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801f7c454211d189710000e8322d00/content.htm
CATT - Computer Aided Testing Too
http://help.sap.com/saphelp_47x200/helpdata/en/b3/410b37233f7c6fe10000009b38f936/frameset.htm
Test Workbench
http://help.sap.com/saphelp_47x200/helpdata/en/a8/157235d0fa8742e10000009b38f889/frameset.htm
Coverage Analyser
http://help.sap.com/saphelp_47x200/helpdata/en/c7/af9a79061a11d4b3d4080009b43351/content.htm
Runtime Monitor
http://help.sap.com/saphelp_47x200/helpdata/en/b5/fa121cc15911d5993d00508b6b8b11/content.htm
Memory Inspector
http://help.sap.com/saphelp_47x200/helpdata/en/a2/e5fc84cc87964cb2c29f584152d74e/content.htm
ECATT - Extended Computer Aided testing tool.
http://help.sap.com/saphelp_47x200/helpdata/en/20/e81c3b84e65e7be10000000a11402f/frameset.htm
Just refer to these links...
performance
Performance
Performance Guide
performance issues...
Performance Tuning
Performance issues
performance tuning
performance tuning
You can go to the transaction SE30 to have the runtime analysis of your program.Also try the transaction SCI , which is SAP Code Inspector.
1 Always check the driver internal tables is not empty, while using FOR ALL ENTRIES
2 Avoid for all entries in JOINS
3 Try to avoid joins and use FOR ALL ENTRIES.
4 Try to restrict the joins to 1 level only ie only for 2 tables
5 Avoid using Select *.
6 Avoid having multiple Selects from the same table in the same object.
7 Try to minimize the number of variables to save memory.
8 The sequence of fields in 'where clause' must be as per primary/secondary index ( if any)
9 Avoid creation of index as far as possible
10 Avoid operators like <>, > , < & like % in where clause conditions
11 Avoid select/select single statements in loops.
12 Try to use 'binary search' in READ internal table. Ensure table is sorted before using BINARY SEARCH.
13 Avoid using aggregate functions (SUM, MAX etc) in selects ( GROUP BY , HAVING,)
14 Avoid using ORDER BY in selects
15 Avoid Nested Selects
16 Avoid Nested Loops of Internal Tables
17 Try to use FIELD SYMBOLS.
18 Try to avoid into Corresponding Fields of
19 Avoid using Select Distinct, Use DELETE ADJACENT.
Regards
Anji

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?

How can I sign up with Enterprise program, while I have an active membership of the iOS developer program?
I have bought a memership for the iOS Developer program.
I have created an in-house app.
Now I want to publish it to all employees without registering the devices.
So..
I go to their website and try to sign up for the enterprise program, image shown below:
http://s29.postimg.org/q06ylh5o6/Clipboard01.jpg
Within the image above, I click continue...
http://s14.postimg.org/46lqcpy74/Clipboard02.jpg
Then I am taken to the image above, there I need to select a program, but I already have a program, the iOS developer program! And the checkbutton of that program, is disabled. If I try to click continue at this page, without sleecting a program, a javascript-box shows "You have to select a program before continuging"...
Do I need to unsubscribe my iOS developer program, to then register it again? Lol!
PS: no clue where I should post this, looked over the forums and could not see anything related to singing up, registering for a program...

Our apps came offline automatically shortly after this as iTunesConnect thought we had not renewed our license, even though we had several weeks ago.
We had a brief panic as our apps were offline for 12 hours, which is how long it took Apple Support to work out what was wrong and hook things up.
I suggest you contact them ASAP to get this fixed so you don't get that iTunesConnect alert to your phone 'Your app status has been changed to Pending Contract'.

I have Photoshop CS4,on how many computers can you install this program ?

Hello,
I got Photoshop CS4. On how many computers can you install this program ?
Sonste

The license and activation rights are for a single user on two computers that are not used simultaneously—such as your desktop machine and your laptop.

How to change system time through java program

Hi
I want to know, how to change system time through java program.
give me a idia with example.
Thanks

There isn't any core Java API for this. Use JNI or call an external process with Runtime.exec().
~

How to Access Maintenance View from a program

Hi Experts,
I have created a maintenance view for a table. i want to insert data's into the table through the maintenance view. I don't know how to access the view, how to insert data into the Maintenance view. Please suggest me how to access the view from the program.
with regards,
James...
Valuable answers will be rewarded...

Hi,
What is the need to search for a program.
Use transaction SM30 or SE16 to create or maintain entries in the table.
e.g. if the Maintenance view is created on table A, then Goto transaction SM30 or SE16 and give the table name as A and proceed. This will automatically take u to the maintenance view on tha table A.
Regards,
Himanshu

How to Compile & Deploy the Java Concurrent Program File

Hi,
There is a requirement to create the Java Concurrent Program in Oracle eBusiness. I am able to create the Java Concurrent Program file. But unable to do the following things:
1.Since it is custom file, which location I will deploy the file?
2. How to compile the file?
3. In the execution file path and executable file name what should I specify for JCP?
Please guide me.
Thanks

Please see (How to register and execute Java Concurrent Program ?in Oracle Applications R11i ? [ID 186301.1]) for the complete steps (i.e. define concurrent program and add it to the request group, .etc.) -- This is also applicable to R12.
You may also see:
Classpath Setting of Third Party Jar Files in R12 Java Concurrent Program (JCP) [ID 1292694.1]
Integrating Custom Applications with Oracle Applications [ID 176852.1]
Java Concurrent Program FAQ [ID 827575.1]
https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Program&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

How do I install the video editing program I just bought from Adobie?

How do I install the video editing program I just bought from Adobie?

Mylenium
Thanks for the response. My system is Windows 7 with a painfully slow ATT
high speed connection.
I got the "Cloud" including CS6 , yesterday,after a chat with a nice Indian
fellow who called me back from Bombay. Surprisingly he was looking forward
to Thanksgiving too but probably because he gets a day off.
I now have the Adobe Premiere Pro loaded (it took nine hours) and
installed. Now I'm starting the tutorials.
Hopefully I'll be editing soon.
Thanks again
Lyman Dave

I bought iphone 3G with ios 4.2.1 -however I couldn't install viber, Skype--it say that it needs update to ios 4.3 what it means and how can I mange to install such program?

could you some one help me? I bought iphone 3G with opration system ios 4.2.1 ..however i couldn't install viber, skype and othe software , ...it say that need update to iso 4.3 .what it means and how can I manged to install such program in my iphone?

iOS 4.2.1 is the latest version available for the iPhone 3G, if apps require iOS higher than that then unfortunately you will not be able to install it.

How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

how to solve the problem when opening program illustrator cs6
ERROR: 16
It is WINDOWS 8.1 / 64 BIT
help please

Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
02/14/14 07:20:26:474 | [INFO] | | OOBE | DE | | | | 8860 | DEVersion: 5.0.0.0
02/14/14 07:20:26:475 | [INFO] | | OOBE | DE | | | | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
[    8860] Fri Feb 14 07:20:26 2014 INFO
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
CHECK : Another Native OS installer already running
Create Required Folders
Assuming uninstall mode
Lookup for master payload
[    8860] Fri Feb 14 07:20:26 2014 ERROR
DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
[    8860] Fri Feb 14 07:20:26 2014 INFO
:: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
Exit Code: 33 - The product is not installed, cannot uninstall.
Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

How do we call smartforms in abap program or web services

how do we call smartforms in abap program or web services
How many types of smartforms are there?
points will be rewarded

Hi
See this sample program
Using the fun module smartform is called from the program
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
Reward points for useful Answers
Regards
Anji

How to Swithch on Modification Assitance in Program

Similar Messages

Maybe you are looking for