How to terminate the program after we run it?

I am doing Ehernet LabVIEW program.In that program I developed the code for generating message box if the bytes u sent to another system should have to come back again.If the bytes are coming in the result then the message box should appear as "Ehernet Test Passed".If it is False then message box should appear as "Ehernet Test Failed".When I run the program the message box was appeared.I put the message box in the Case structure.After running the program the loop was not terminated.How can I overcome the problem.I attached my vi.Pl verify this.
Attachments:
new_ethernet.vi ‏45 KB

Hi
First of all - you don't have any loop in your vi.
If you want to exit LV after running the vi, you can use the "Quit LabView" function. The "Stop"-function just stops the vi, which actually does not affect your vi, as it stops automatically, after closing the messagebox.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...

Similar Messages

I am trying to download keepass, where do I go to run the program after it's been downloaded?

I am trying to download keepass, where do I go to run the program after it's been downloaded?

OK. Double-click on the file which will open it in place if it is a .ZIP file or it will mount on your Desktop if it is a .DMG file. In the case of the former you want to select the unarchived application and drag it to your Applications folder. Double-click on the application to open it. In the case of the latter double-click on the Desktop icon for the mounted image, select the application in the window and drag it to your Applications folder. Then double-click on the application to open it.

Explorer exe. Application error" it says "The instruction at 0xf6628a87 referenced memory at 0x00000000 The Memory could not be read Click on OK to terminate the program

the other day i did the windows 2008 R2 Rebooting
Explorer exe. Application error" it says "The instruction at 0xf6628a87 referenced memory at 0x00000000 The Memory could not be read Click on OK to terminate the program
i just get this error message. If it is anything serious, there is nothing I can do.
the 2008R2 OS was hang out of control
what is a major cause of error message? is there any fix or Hotfix?

Hi,
Regarding the current issue, it may be caused by some third party software conflicting with explorer.exe or it could be a memory conflict with a driver.
Signs of low memory include poor performance, low-memory or out-of-memory notifications, and display problems. I would suggest you to follow the steps provided in these methods and check if
it helps in resolving the issue:
Method 1: Run System Maintenance troubleshooter:
Step 1 : Move your mouse to the right bottom and click on search.
Step 2 : Type Troubleshooting in the search box and click on it
Step 3 : On left pane click “View all” click on the "Run Maintenance task" under the System and Security.
Step 4 : Click on the "Next" in the System Maintenance interface.
Select "Try troubleshooting as an administrator
Method 2:
I would suggest you to run the Memory Diagnostic Tool and check if it helps.
a) Press
Windows key and type "memory".
b) Click "Settings" and then click the result "Diagnose your computer's memory problems".
c) Select the recommended option to run the tool.
Check if the issue still persists. If the issue persists, increase the virtual memory.
Change the size of virtual memory
http://windows.microsoft.com/en-in/windows-8/change-the-size-of-virtual-memory
Method 3: I would suggest you to run System File Checker tool (SFC.exe) and check if it helps. The System
File Checker tool (SFC.exe) scans for missing or corrupted system files and repairs them.
Run System File checker to see if you have any corrupted system files.
Use the System File Checker tool to repair missing or corrupted system files
http://support.microsoft.com/kb/929833/en-us
Method 4: If issue persists follow these steps:
I would also suggest you to check if the same issue occur in Safe Mode and check if the issue occurs there as well.
Step 1:
Start your computer in safe mode
http://windows.microsoft.com/en-US/windows-8/windows-startup-settings-including-safe-mode
Step 2:
Follow the Microsoft KB article to perform clean boot on the computer. A clean boot helps eliminate software conflicts.
How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Disclaimer: After you have finished troubleshooting, follow these steps from section “How to
reset the computer to start as usual after clean boot troubleshooting” to reset the computer to start as usual.
Hope this helps.
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

How many times a program has been run?

Is there a transaction or table or something that tracks how many times a program has been run? The number of times the program has been run plus using the programs' attributes for last changed would help me a lot. We need this for an archiving study to determine of the client has set up the configuration correctly since they went live and have been executing the correct programs. Thanks and mucho rewards if someone has an answer. FYI - I have done a forum search and could find nothing on this topic. I have looked at the tables TADIR and no help, as well as transaction STAT.

I know ST03N transaction can be used extensively to determine how the programs were executed or even to know who all are using a particular transaction...
I tried to find if we can find the number of executions of a program through this transaction, I could not find myself...
try if you can find it through this tcode.
Phani

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

How to call the Application configuration in run time.

hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.S

Hi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha

How to find the program name of the created sap query ?

how to find the program name of the created sap query ?

Hi avinash,
Try in this way..
Go to SE16 and then go to table TSTC.
in that give program name as *followed by your query name
(for example *TESTQUERY)
and run , that will give progname======queryname.
this way you can find program name.
vijay

Waveform Graphs: Is there a way to save data to a file and then clear the graph after each run?

This is just an added feature that I would like to insert because I end up having to erase the previous graph(for viewing and simplification purposes) after almost every plot cycle. Does LabVIEW 7.0 have a built-in feature that allows the user to automatically clear the graph after each run.
Thank you,
Keith Blackwell

May I recall you that to clear a graph you have to create a property node,
choose value and connect an 1D array with its first value to zero.
Then using a Select vi enables you to choose from clear or graph value.
Gérard
Gérard Férini
Switzerland
http://home.tiscalinet.ch/gferini/
remove -move to reply personally
"Greg McKaskle" wrote in message
news:xEmJc.43762$[email protected]..
> > I went into the function pallette-->signal manipulation-->align and
> > resample
> >
> > and found something that may be useful, but I'm not sure how to use
> > it. I guess I have to play around with it by trial and error. Was this
> > the VI seetting that you were referring t
o?
> >
>
> The option I was talking about is for the entire VI. It resets the
> value of all indicators prior to running. The setting is located in the
> VI Properties dialog on the execution page I believe. In the end, there
> are multiple ways to get this to work, and if you want just a few
> indicators to be reset, you want to use locals or control methods, but
> th eVI Properties is a convenient way to get all indicators cleared at
once.
>
> Greg McKaskle
>

I deactivated Photoshop CC on my Mac Mini and downloaded PS CC on my MacBook 1.1. I didn't realize the program will not run on MB 1.1. I uninstalled the app on the MacBook. I tried to reactivate on my Mac Mini and it tells me I already have the program lo

I deactivated Photoshop CC on my Mac Mini and downloaded PS CC on my MacBook 1.1. I didn't realize the program will not run on MB 1.1. I uninstalled the app on the MacBook. I tried to reactivate on my Mac Mini and it tells me I already have the program loaded on two computers. How do I solve the problem?

The activation server shows that it is now activated on two computer, it has been deactivated once .
When you install it on the third computer or for the third time & when you to activate it, if it installed & activated already twice, there will be an option of deactivating it from the previous computers, please click on that.(To deactivate from preinstalled machine, Open any Adobe CC application > Help Menu > Signout.)
Next it will allow you to activate on your new machine,
Now you can go back to your first computer, log out & log back in of Desktopp CC App, launch any product, if there is any product to buy, in that prompt there will be an option to " license the software", please click on that & sign in.
It will reactivate the CC on the first machine.
You have already deactivated it from one machine, hence you can activate it on third computer.
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html#deactivate-problem
In case the is still not resolved, please contact Adobe at
http://adobe.ly/yxj0t6
Please refer to:
Creative Cloud applications unexpectedly revert to trial mode | CS6, CCM
I'm a Creative Cloud member, why is my app launching as a trial? Mac OS 10.7.4
creative cloud software says my free trial has expired, but I have a paid subscription
Re: Creative Cloud for Teams - second computer will only install as trial version
Creative Cloud Help | Install, update, or uninstall apps
Hope it helps.
Regards

How to cut the zeros after the decimal point ?

Hello everybody,
does anyone know a solution how to cut the zeros after the decimal point at at CHAR data field?
For example the field
&RM06P-PRMG1&
This is a char field in the database, so that the command
&RM06P-PRMG1(.0C)&
doesn't work.
At the moment the output on the form is like that
124,000
It shoud be like that
124
It would be great if anyone could help me!
TIA!
Strobbel

Hi Strobbel,
If you are working on standard sapscript, first make a zcopy of it, do the modifications in that and assign the new form to the output types in tcode NACE.
First you need to create a program to write the logic, so go to tcode SE38 , create a new program (say zremove_zero) with Program type Executable.
Now you will see ABAP Editor with statement;
Report zremove_zero.
Add the following lines below the report statement.
*& Form remove_zero
* text
* <--lv_AMT text
FORM remove_zero CHANGING lv_amt.
DATA p_amt TYPE p.
MOVE lv_amt TO p_amt.
MOVE p_amt TO lv_amt.
Condense lv_amt.
ENDFORM.
Now save and activate the program.
Now open the zcopy of your script and Just above the statement &RM06P-PRMG1& write the following lines;
/: perform remove_zero in program zremove_zero
/: changing &RM06P-PRMG1&
/: endperform.
Now you can see your amount printing without decimals.
Try and let me know, hope i have guided you clearly.
Regards
Karthik D
P.S.: I advice you to take help from an ABAPER.

How to put the program on the fone

I need some instructions on how to run the midlet on the fone how to transfer the program
I tried to make a wap page with a link to the .jad file
<?xml version="1.0" ?>
<!DOCTYPE wml (View Source for full doctype...)>
- <wml>
- <card id="XML" title=" test " newcontext="false" ordered="true">
test
hello
</card>
</wml>
can some one help me please?

Hi,
To upload ur application to the actual device u can either use IrDA if ur phone supports and u have the port. The other option is to use OTA. u have to put ur application in an application server and add the mime type and hit the IP address of the server using ur AMS.

How to get the program name from transformation id.

Dear Folks,
Could you kindly share to me how to make it please .. ? :-).
As we know that every update rules/transfer rules has it's own program.
Do you know how to find the program for particular update/transfer rules .. ? If i'm not mistaken there is particular comprising about this information.
Could you share to me what table is that and how to find it .. ?
Tks a lot ..
Regards,
Niel.

Hi Sumit,
Tks a lot for your quick response, why i can't fetch the data from that table... ?
What i did is like this ..
1. tcode rsa1.
2. expand the tree for info-provider.
3. ctrl+c, in tech. names for update rules.
4. Open rstran table, and input for that tech. id.
5. Execute it.
But no data i get.
Does this happen only for business content ? Or Could I fetch the data even this is for customized object ..
Still need your guidance.
Btw, i'm now running BI 7
Regards,
Niel.

How do i stop programs from automatically running when i start up my macbook?

how do i stop programs from automatically running when i start up my macbook?
programs such as.. email and Skype.
When i go to system preferences, then users & groups, then to my name, log in items ....this box is clear, i have unchecked everything, yet things still start up......

sometimes these applications will have a setting in the preferences to not open on login of computer. If you see none of that, you can go into:
system preferences> Users & Groups > Select your user>Login Items.
unlock the settings by hitting the lock icon on the bottom left of the window then youll be able to uncheck these things from opening when you log in.
Hope this is helpful or answers the question.

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close.

Forcing program to close, I am deleting a lot of files from my trash but it stopped working about 1/2 way through (1650 files left) so I tried to reboot but it won't let me because a the program is still running which I can't close (stuck at 1650 files to go). So it allowed me to click cancel now it says "stopping" for 3hrs now. Is there anyway to force the MacBook Air (new model) to close as you can't remove the battery?

Press and hold the power button until the Mac turns itself off. This force-shutdown should be done only after you've exhausted other options (you seem to have done so).
Wait at least 60 seconds.
Then press the power button to start up the Mac. It will take a little longer to start up because it will perform additional self-tests on the first boot after a forced shutdown.
Once the bootup is complete, you should be able to delete the trash. Hold down the option key while choosing to empty the trash, which will automatically delete "locked" items.

Firefox does not open at all - error message when loading firefox 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program in English

I cannot open firefox at all. I have removed and re-installed but it has made no differenct. I just get an error message when loading firefox - as follows - 'The instruction "0x0000000" referenced memory at "0x0000000". The memory could not be "written". Click on OK to terminate the program.
Can anyone help me sort this out? If I log in as someone else Firefox works?
== This happened ==
Every time Firefox opened
== the computer shut down unexpectedly ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

You can o a malware check with a few malware scan programs. 
You need to use all programs because each detects different malware. 
Make sure that you update each program to get the latest version of the database before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]

How to terminate the program after we run it?

Similar Messages

Maybe you are looking for