How to test and debug EJB from a JUnit TestCase?

It is possible to access an EJB from a JUnit TestCase? I have seen that in this case the embedded OC4J is not started automatically. Is it possible to start it programatically?
Thanks in advance
Cs.

For the first part, I googled for "JUnit" and "EJB" with many hits like
http://www.devx.com/Java/Article/28119
and
http://www.onjava.com/pub/a/onjava/2003/02/05/automate_ejb.html
The embedded server can be started by running an EJB from the IDE before performing the tests. If you start it programmatically (e.g. issuing the startup command) then it will be launched as a stand alone OC4J container.
EJB 3.0 will make things easier to test in the near future
Frank

Similar Messages

How to test and configure custom extensions in Flash Pro CC?

Hi,
How do you install custom CS extensions in Flash Pro CC for testing and debugging before they have been signed and packaged?
We have a custom extension for Flash Pro developed in-house using the CS SDK that we've been using with flash pro CS5 and CS6 but we're having trouble getting it to work in CC and I'd like to run it locally in test/debug mode.
With flash pro CS6 and CS5 it was possible to test extensions by copying the output folder from flash builder into the CS Service Manager root folder (e.g. /Users/<username>/Library/Application Support/Adobe/CS6ServiceManager) and setting PlayerDebugMode to 1 in the CSXS preferences.
I've added the PlayerDebugMode=1 flag to com.adobe.CSXS.4.plist however, I can't find the equivalent service manager folder for Flash Pro CC to copy the extension into.
Is there a different folder to use for CC or is the process for testing extensions completely different? (are extensions written in the CS SDK even compatible with CC?)
I'm running Mac OS Lion.
Thanks,
Stephen

Thanks, that explains a lot.
I'm afraid I'm a bit confused about what the preferred way of developing extensions is going ahead. There seems to be a lot of conflicting documentation on the adobe site, e.g. http://www.adobe.com/devnet/creativesuite.html seems like the top page for extension documentation but it only talks about CS SDK 2.0 which uses CSXS and doesn't seem to be compatible with creative cloud apps.
Then there's CS Extension Builder 2.1 which looks like it supports Flash Pro CC but isn't mentioned in the pages you linked too and it doesn't mention JSFL, but talks about the CSAW library.
Do you know if:
* The CS SDK has been dropped completely?
* CS Extenstion Builder is deprecated? (I can't see it as an option in the list of Creative Cloud apps)
* Is then any documentation/utilities to help migrate existing CSXS extensions to work with creative cloud apps?
Thanks,
Stephen

How can i access the EJB from a Webdynpro

Dear all,
How can i access the ejb , from a webdynpro?.
Is there any way to do that?.
I want to write the entire code (business functions) within the EJB and i wan to access the entire methods from a WebDynpro Application.This is the situation.
Please help me to , resolve this problem.(Here im using JDBC Connection .. etc.).
I want to do the basic connection setting's and data retrieval part within the EJB and use that within the WebDynpro..
how can i seperate this two(i mean, i want to seperate the JDBC connections and WebDynpro,i dont want to hard code any connection parameters within the webdynpro code)
So that i want use that saet of particular function's in many webdynpro applications..
(i dont need any help regarding webservice way.)
If anyone can , please help me..
I tried that javabean class , manifest file , that way (importing javabean model).
but im getting errors.
I cant properly utilize that..
So please help me with steps regarding that,,
for javabean
and if any , for EJB also..
with regards
Kishor.G

HI,
Since webdynpros follows Model View Controller Architecture You can access EJBs in webdynpro(views/frontend) infact to connec to database uding JDBC you have to utilise EJB ( opening connection to database closing, and other Business functionality).See this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/unkown/web dynpro tutorial and sample applications.faq#q-7
<b>How to access the Car Rental Web Service?</b>
Regards,
RK

How to deploy and debug Central Office 13.0.1 Application in Oracle AS

Hi,
Can anybody please explain me how to deploy and debug Central Office 13.0.1 / 13.1.1 Application in Oracle Application Server via Ecllipse IDE.
Please explain this:
1. Run the Oracle Application Server in debug mode from Ecllipse IDE.
2. Deploy the Central Office 13.0.1 into Application Server from Ecllipse IDE and able to debug the code.
3. Restart the Oracle Application Server in debug mode from Ecllipse IDE.
Thanks
SRR

I got the solution

ICal Server email invitations - how to test and get this feature working

iCal Server email invitations - how to test and get this feature working
Thanks Apple for introducing this nice little feature into iCal but then completely neglecting to write any sort of useful manual that can explain what to do when it doesn't work after you set it up for the first time.
At long, long last we have finally got there after about 6 months of fiddling on and off, so I thought I had better post up the process since many have similar issues and it is hard to ascertain what is going on.
Using an external email server was just a waste of time and it still wouldn't handle the replies properly even though it was supposed to handle '+addressing'. In the end I set up a special gmail account for the iCal server and finally got it working. I list here the process of configuring and testing the system to check that each little stage is working.
Set up a Gmail account in Apple Mail to access and test in the usual way for any email account (e.g. [email protected].);
Set the iCal server email to access the same email using the following settings:
IMAP
SMTP
[email protected]
smtp.gmail.com
Port: 993 [x] Use SSL
Port: 587 [x] Use SSL
User & Pwd
Login
User & Pwd
To test the settings:
send out a test email from Apple Mail to a non-server email address that you can access to check it has been received;
send out a test email from your non-server email account to [email protected] and check that it is received;
this tells you that the GMail account is setup correctly and working
Testing iCal:
I noted that iCal was deleting any emails that arrive in the inBox in Apple Mail as soon as they arrived (this is to be expected);
test that the invites are being sent from iCal by setting an event in iCal and inviting your non-server address (you may not see any sign of this in Apple Mail but you should catch it in the iCal server log and possibly in the Gmail sent mail box);
check that the invite is received at your non-server account and Accept it in iCal on another machine - the reply is automatically sent back;
the replies appear in Apple Mail but are quickly deleted by iCal. But their record for you to see is left in Gmail under 'All Mail';
Accepted invites appear as a notification button on the top left hand bar on iCal where you click to acknowledge them and then the attendee is shown as a green circled tick instead of a grey circled ?.
this shows that iCal invitations are working correctly. Whenever an event is updated, all invitees should be updated by email automatically.
I hope this helps anyone - I could certainly have done with something similar when I started with looking at this.
Anatole
The Error and Access logfile in the Server app under iCal server are very useful in determining any errors. I got lots of imip errors when I didn't quite have the settings right. The port is critical and it won't tell you this is the problem if it fails.

iCal Server email invitations - how to test and get this feature working
Thanks Apple for introducing this nice little feature into iCal but then completely neglecting to write any sort of useful manual that can explain what to do when it doesn't work after you set it up for the first time.
At long, long last we have finally got there after about 6 months of fiddling on and off, so I thought I had better post up the process since many have similar issues and it is hard to ascertain what is going on.
Using an external email server was just a waste of time and it still wouldn't handle the replies properly even though it was supposed to handle '+addressing'. In the end I set up a special gmail account for the iCal server and finally got it working. I list here the process of configuring and testing the system to check that each little stage is working.
Set up a Gmail account in Apple Mail to access and test in the usual way for any email account (e.g. [email protected].);
Set the iCal server email to access the same email using the following settings:
IMAP
SMTP
[email protected]
smtp.gmail.com
Port: 993 [x] Use SSL
Port: 587 [x] Use SSL
User & Pwd
Login
User & Pwd
To test the settings:
send out a test email from Apple Mail to a non-server email address that you can access to check it has been received;
send out a test email from your non-server email account to [email protected] and check that it is received;
this tells you that the GMail account is setup correctly and working
Testing iCal:
I noted that iCal was deleting any emails that arrive in the inBox in Apple Mail as soon as they arrived (this is to be expected);
test that the invites are being sent from iCal by setting an event in iCal and inviting your non-server address (you may not see any sign of this in Apple Mail but you should catch it in the iCal server log and possibly in the Gmail sent mail box);
check that the invite is received at your non-server account and Accept it in iCal on another machine - the reply is automatically sent back;
the replies appear in Apple Mail but are quickly deleted by iCal. But their record for you to see is left in Gmail under 'All Mail';
Accepted invites appear as a notification button on the top left hand bar on iCal where you click to acknowledge them and then the attendee is shown as a green circled tick instead of a grey circled ?.
this shows that iCal invitations are working correctly. Whenever an event is updated, all invitees should be updated by email automatically.
I hope this helps anyone - I could certainly have done with something similar when I started with looking at this.
Anatole
The Error and Access logfile in the Server app under iCal server are very useful in determining any errors. I got lots of imip errors when I didn't quite have the settings right. The port is critical and it won't tell you this is the problem if it fails.

Urgent!!!!How to deploy only an EJB from Weblogic to oc4j.

Hi
How can i deploy only EJB from Weblogic into oc4j without any web application or client coming into pitcture as my client access bean remotely....
regards,
Sapthapathi

If you are migrating from ejb1.1->ejb1.1 you shouldn't have many changes - your ejb-jar.xml file should be the same (I assume you are still talking about ejbs). Once you pull over the base ejb - then if you want to, mess around with the automatically generated orion-ejb-jar.xml file. Obviously - those are all app server specific. I go back and forth between wls6.1 and oc4j all the time. When going from wls5.1 to oc4j - what particular issues do you run into. What do you mean, in particular, by configuration changes?
Curious -
Ray
hi,
EJBs and other applications can be migrated from weblogic to oc4j but many changes are required.These changes are mainly configuration changes rather than code changes.Infact there are many problems in effect while migrating and delloyment.Hope oracle is a bit more attentive to this issue.
regards,
chennai

How to deploy and debug java web service in eclipes or using any other soft

Hai,
can any one tell me how to deploy and debug java web service in eclipes or using any other software.
i have used tomcat web server and jdk1.4.0 to develop web service.
we have used web service to interact with MS outlook .
bye
sudhakar.m

Hi Sudhakar,
If you are used to working with ant then you can very well use eclipse to deploy your web service.
You would usually have the ant script in the source root working directory. From eclipse if you select the build file from the navigator view and right click you will see a run ant option in the pop up menu.
Select that option and you would be able to see each targets with a checkbox select option. So define each target maybe one for wsdl2java conversion, one for compilation and one for deploying your web services. You can either make all of them run by having depends option on or you can run them individually as it takes your fancy.
I am not sure about debugging a web service yet.
Hope this helps
Aviroop
The truth is out there? Does anyone know the URL?

LSMW testing and Debugging

Hi
I really need help about testing and debugging LSMW. I really appreciate if anybody can provide me enough help on how to test LSMW and Debug in QA environment
Pls help me

Once you input the Project, Subproject and Objec on the initial screen and execute it.
Here you are guided through the individual steps of data migration. Example: Maintain Object attribute...etc.
on the application tool bar, click on the personal menu push button, you will list of all the steps. Check the Display conversion program.
After you maintain the field mapping, read data and convert data. you can execute the Display conversion program step. This will display the generated progrom.
Here you can set the <b>break point</b>.
Other way is while doing the field mapping, you can set hard break-point.

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue.

For tablet touch is very slow in firefox OS. Some times it is hanging. While dialing number to call it taking to much time. How to fix and debug this issue. Waiting for your reply.

Hi sb00349044,
I'm sorry to hear that you are having problems with your Firefox OS device. Can you please specify the device Model and Version?
If your device is one of the Firefox OS Tablets from the contribution program, please be aware that those builds are still being improved and ironed out. If that is the case, please follow the guidelines for the contributor program to report issues with the device.
Thanks,
- Ralph

How to deploy and run EJB in eclipse without XDoclet

Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDoclet

HI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V

How to upload and share document from pages

how to upload and share document from pages app?

Hello dannafromfl,
Documents can be shared via File Sharing to iTunes or via Email.
Pages for iOS (iPad): Send and receive documents in email messages
http://support.apple.com/kb/PH3564
Pages for iOS (iPhone, iPod touch): Share documents by connecting to your computer
http://support.apple.com/kb/PH3598
Cheers,
Allen

How to copy and paste text from one photo book page to another.

hello,i downloaded this software 2days ago,and i've been having so much fun with it. pls i need help on how to copy and paste text from one photo book page to another. Secondly how to copy my completed photo book pages project to another laptop for printing. thanks
This question was solved.
View Solution.

Hi DG.
The easiest way to copy an HP Photo Creations project to another computer is to click the Share button. That will upload the project to the Web and give you a link you can paste into an email. Clicking the link on the other computer allows you to download the project and personalize it. This quick video shows the process. (The screen looks slightly different now, but the concept is the same.)
Another way to share a project is copy the project folder to a thumb drive. Look in Documents/HP Photo Creations/My Things to find your saved projects.
Our customer support team would be happy to walk you through the process. Contact them at [email protected]
Hope this helps,
RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

How to build and deploy ejb in j2ee!!

HI there!!
Newbie Question. I know this is very rude to ask a question "How to build and deploy ejb in j2ee server??", but please help me. I just learned some servlets worked with tomcat. Now I want to learn more about ejb, could anyone suggest me any online tutorial or book where in it is explained step by step builiding and deploying ejb's in j2ee server, please help me. I would be grateful to you.

A good book to start with is Enterprise JavaBeans by Monson-Haefel (O'Reilly press). It covers deployment of EJBs on J2EE servers. Also check out sites specific to your server, sometimes they have specific requirements (like Weblogic).

How do download and install firefox from redhat command prompt step by step with commands

How do download and install firefox from redhat 6 command prompt
Im new to Linux so would appreciate step by step details with commands

Is your Windows Vista 32 or 64 bit?
To find out if your computer is running 32-bit or 64-bit Windows, do the following:
Open System by clicking the Start button, clicking Control Panel, clicking System and Maintenance, and then clicking System.
Under System, you can view the system type.

How to drag and drop user from one node to other node.

Dear All,
How to drag and drop user from one node to other node.I tried but no success.
What are precautions to be taken.
Cay anybody kindly explain it.
Thank you.

Hello, if you had this message you had created BP....
Now you don't have to user USERS_GEN this transaction is used only in first action, when you create the user in R/3 and then you pass this user to EBP in the organizational structure.
Now you have to:
1) Go to PPOMA_BBP
2) Double click on organizational unit that you want to put this user (purchasing organization or purchasing group box for example)
3) Select assign button in the top of the functions in the transaction
4) Click on incorporates -- position
5) Put userID that you want to add in this organizational unit
6) Click Save
Thanks
Rosa

How to test and debug EJB from a JUnit TestCase?

Similar Messages

Maybe you are looking for