How to Test Design Time Fusion Customizations in JDeveloper

Hi
When we look at the wording and the diagram in the Oracle documentation, it says -
"After you create these customizations, you can test them locally in JDeveloper and then deploy them directly into the full test environment. You can also deploy your customizations to a sandbox."
2.1.2 Design Time Customization Workflow
http://docs.oracle.com/cd/E28271_01/fusionapps.1111/e16691/ext_lifecycle.htm#CHDIJJJJ
But the message in this OTN forum we are getting is that we have to deploy it to the server and cannot be tested out locally.
Could someone please clarify. The ability to test it out locally would be of tremendous help to us in reducing the development lifecycle.
Thanks
Srinivasa Sunchu

Sorry for the long delay. Response from the colleague:
>
For SOA Jdev customizations there is nothing which can be tested locally in Jdev. The customized composite would need to be deployed to a standalone environment to test.
>
For other DT customizations i.e. customizations created in JDeveloper for ADF can be tested locally on integrated WLS. RT customizations created using composers require a deployed environment; the the customized definitions can be tested in sandboxes from which they can be published into production.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Similar Messages

Design Time Bean Customizer validate Rule and use multiple time problem

Hi,
I have implement a custom validation rule ,add a design time bean customizer for my rule then register on datamodel project,i can use the graphic design time bean customizer and add my validate rule to my entity xml file,but when i add another instance to the same entity,data added to entity xml file was not correct,it may be not integrity or all data are same ,how can i do ? I found all bean validation with the same name ,it is the registered rule name "plsql rule", any suggestion are appreciative
thank you advance
li xin zhu 2007/09/08

Hi,
One thing you can do in the FOX would be to mark all fields in 'to be changed'. This will have the impact of having all data in the same data package and the FOX code will execute only once.

How to delete design time & configuration time objects permanently

Hi All,
how to delete the design time objects & configuration objects permanently, because i have created some objects repeatedly in different scenarios. there was some confliction, that's why i am going to delete the objects. Is it possible, if yes revert back to me asap.
Thanks & Regards,
Nag.

hi,
Check tis for how to delete IR objects.
/people/siva.maranani/blog/2005/05/22/how-to-delete-software-component-from-integration-builder
and to delete it from ID delete it from the OBjects TAb.
Activate the change list.
Sachin

How to disable design time data binding?

I am using Studio Creator IDE for the presentation layer and bringing the project into eclipse and from there moving on to creating daos,adding business objects etc.
However, when re-importing my files from eclipse to the Studio Creator to make layout changes, on the design view, i keep getting all these SQL exceptions.
Here's my current fix:
For eg, if on a page i had a Data Table component, i comment out my dao methods that populate the cachedrowset for the table data provider and i add for eg:
personRowSet.setDataSourceName("java:comp/env/jdbc/Travel");
personRowSet.setCommand("SELECT * FROM TRAVEL.PERSON");
personRowSet.setTableName("PERSON");
and only then, i am able to see my table component in the design view.
Is there an option somewhere to tell the IDE not to check data bindings at design time???
That would be very very helpful.
Thanks!

Hi,
There is no option, ASAIK, to turn off the data bindings at design time. As you have mentioned the option that comes to my mind is to comment out the code for data binding till the design work is over.
Cheers
Girish

Strange :Design Time Bean Customizer does not display

hi,I write a cutomer validator rule and create beaninfo class,bean customizer class.
and register as a rule ,it works very well.then I modify customizer class,when I want to add new rule on a entity,neither default define property nor my custormerize swing bean display,but old defined rule can be edited through new customizer swing,why ? any advise are great
thanks
lixz

The USB webcam seems to update the VideoMode to value of 4 (0 before). FrameInterval stays 0.
No errors appear during the run. When you terminate, the following errors appears.
The firewire camera, Bassler does not have the problem. It is the USB webcam that has this issue.
Attachments:
Bard_Design.jpg ‏15 KB

Design Time Customization in ADF

HI,
I like to know more about How to achieve Design Time Customization in ADF.
Please guide me about this. (You can Share link, sample example, study material about the same.)
Thanks In Advanced.

Did you try asking Google?
http://www.oracle.com/technetwork/developer-tools/jdev/adfmds-128339.pdf is one of the things you'd find if you had

Adf components not seen at design time

Hi All,
At design time pages are displayed like:
<>Root
<>Output @page directive
<>View
<>Html,
and so on, for any page in the application. In another application all the pages look fine (if I copy their contents). Tag libraries and libraries in project properties tab are the same as in normal projects. What settings should I check to be able to see all components in normal mode at design time? This is JDeveloper 10.1.3.2.0.
Thanks
SNikiforov

http://blogs.oracle.com/Didier/2007/02/diagnosing_problems_with_the_v_1.html

How to disable process design time attributes WS RM

Hi,
I recently configured a NW BPM test scenario which works as expected. When I tried to test/call BPM Process using SOAP UI/Webservice client I am unable to send a message to SAP BPM process due to WS RM & WS A are activated at design time. While developing scenario in NWDS how can I disable the properties WS-RM & WS A for start event trigger as this acts provider WSDL for Webservice client . Thank you in advance.
Thank you,
Mallik

Hi Mailk,
Any/every asynchronous web service developed in the ESR and then imported from ESR into NWDS will have properties added to the WSDL on import by the design time. The attributes are tagged as shown below.
<ifw:properties xmlns:ifw="urn:com-sap:ifr:v2:wsdl">
On deployment, these attributes trigger the SOA infrastructure to generate the service endpoint interface as WS-RM. These properties cannot be changed in the runtime SOA configuration as they are not editable.
If you want to develop the services in the ESR and then deploy them without WS-RM there are two options.
a) copy-paste the wsdl out of the ESR perspective (the raw WSDL text) and create a local document with same name and then import the WSDL from the file system in NWDS
b) import the WSDL from ESR and then manually remove all the <ifw: properties/attributes, then save the WSDL.
My preference is to develop the service in the ESR (as all services should be) and then import and remove the tags. But the copy-paste and create a local WSDL is less error-prone. In any event you'll need to document the WSDL so that down the road anyone who might modify the service would know that it has been further adapted outside the standard tooling. The <ifw: attributes also control other runtime properties such as authentication, so please do some homework on services deployed with and without the tags so you can see for yourself and really understand the service endpoint generation.
regards, Nick

UndefinedException when working with RL-facts and testing at design time

Hi,
I'm performing some tests with JDeveloper Rules Designer on a very basic level. I'm defining rl facts (fact types), define a rule and write a test function to test this rule at design time. When executing my test function with the "Test Function" function an error occurs:
UndefinedException: symbol 'Person' is undefined in main...
Person is a fact type (RL Fact) that is the output parameter type of the decision function. If I don't use an output parameter everything works fine.
If I use XML Facts instead of RL Facts and define an output parameter for the decision function everything works fine, too.
Are there any restrictions for rl facts?
//Mike

Sure you can read and write at the same time. But normally you would be reading from one place and writing to another place.
I rather regret avoiding the OP's earlier post asking how to combine two classes. I looked at the two classes posted and realized the best thing to do was actually to break them into more classes. But I also realized it was going to be a big job explaining why and how, and I just don't have the patience for that sort of thing.
So now we have a Big Ball Of Tar™ and I feel partly responsible.

How to load a file at design time?

I have a custom component which has a property that takes a path to an xml file.
I have a file chooser property editor associated with the property which returns a relative path. The component correctly resolves this path at runtime using the application context etc.. but I'm at loss on how to do this at design time.
The image component in JSC does this correctly as the image is loaded at design time using the url. I'm not sure how this is done but I'm looking for exactly the same functionality.
The only way I figured to correctly resolve the physical path of the file at design time was through the DesignBean.
In order to resolve the path and pass the resolved path to the component property I need to intercept property changed event and change the property value. However doing this in PropertyChanged(..) method of DesignInfo bean for my component doesn't do it as this is called 'after' the property value is set and changing the property value at this point results in a circular loop.
Is there any way to accomplish this? Any help is appreciated.
Thanks.

Is this still unresolved? I'm sure you've read everything at "Building Custom Components"
http://developers.sun.com/prodtech/javatools/jscreator/reference/index.jsp#Building_Custom_Components
by now. I don't have the answer, but if it's still a problem, I'll work with you to figure it out.

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance

How can i design square signal which having a positive and negative values equal to each other and separated from each other by controlled time or distance, As it is shown in the figure below. and enter this signal in a daq.
Solved!
Go to Solution.

By the time you spend for the nice diadram you might have done the vi
Your DAQ like to have a waveform (array of values and dt ak 1/samplerate)
If you set the samplerate you know the array length , create a array of zeros, and set the values of both amplitudes ...
Since I don't want to wire others homework here are some pictures
And there are some drawbacks is room for improvement in my solution, just think of rounding errors ... and what might happen if the arrays get bigger ....
Spoiler (Highlight to read)
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

How to Implement a Time Limit Feature in an Online Test Application ?

I am creating an Online Test application. The time limit can be stored for a Test in the database.
How to implement a time limit such that when the test is started (user clicks on the Start button to go to the fragment containing the Questions) the time left is shown and the test ends (goes to home page) when the timer reaches zero.
Thanks

Hi,
timestamp is a date and thus cannot be used directly to determine seconds passed. So what you need to do is to build the difference between a saved time stamp and the current time.
http://docs.oracle.com/javase/1.4.2/docs/api/java/sql/Timestamp.html
So if you have two time stamps, then calling getTime() on each and building the difference gives you a value, which is millisecond. So to get this to an int value you divide it by 1000
Frank

How to Active face Time on my iPhone 4s remember its design for saudhi arabia plz help me now its using Sri Lanka

Hi guys Help me
How to Active face Time on my iPhone 4s remember its design for saudhi arabia plz help me now its using Sri Lanka its not jeilbroken & Never like do it I heat jeilbroken I need to active my resriction face time with apple & leagle mode plz help
Thank you all

FaceTime is not available for iPhones purchased in Saudi Arabia as stated in this article: http://support.apple.com/kb/HT1937
So unfortunately that iPhone will never have FaceTime.

How to create a drop down box values on design time?

Hello,
I have a drop down box that I would like to edit on design time to have the valus 1 to 10.
Is it possible to doo it on design it or do I have to create a loop in the code to do that?

See go to LocalDictionary->Data Type-> SimpleType Right Click and create a Simple Type giving some Package Name
Once u have created
There u will see Enumeration Tab and give Key Value Pairs by pressing New Button
Now Create a Context Attr and at Type property select that three dots
Then go to Dictionary Simple Type and select the Package u have given
then select the Simple type u have created
Then assign the context Attr to the UI Element
Message was edited by: krish kanth

How to add values dynamically for custom property during design time?

I am trying to create a user control with custom properties. I have a property named Server.
And Values for this property is system dependent. I have the code that can generate the values and is working fine.
During the design time, when I include this control in my application, and type the property name, I want Visual Studio to prompt for the values. Like it
does for Alignment property for some controls shows Left, Right, Center.. during design time.
If the Values are static, I can use an enum and it works fine. I need help with dynamic values.

You can't, afaik.
It's either an enum or you don't get that functionality of values.
There is no right left centre, "Towards the top right but just off centre" - which I just thought of... option for example.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How to Test Design Time Fusion Customizations in JDeveloper

Similar Messages

Maybe you are looking for