How to track the Country of origin using the tcode 'MIGO_GR'

Hi Group,
I was trying to run the tcode 'MIGO_GR' and want to see the field value Country of Origin(HERKR) in the display batch tcode 'MSC3N', but I am not able to see this value.
the thing is that, the data comes as Idoc with the batch number, and in this batch there was no info about the country of origin (HERKR) and hence when I check in MSC3N, I could not see the value for Country of origin.
Could you please let me know the enhancement to be used to populate this value(HERKR) into the Batch that gets created (thru tcode 'MIGO_GR')? and also please let me know the table that gets updated?
thanks for your help in advance.
Regards,
Vishnu.

Hi Group,
I resolved the issue myself and the solution is as under:
When we run the transaction 'MIGO" or "MIGO_GR", internally the system generates a Batch, which can be changed by the User at his interest to any number he likes.
And when this Batch gets created, we can have a Userexit (EXIT_SAPMM07M_003) called to update the Country of Origin (HERKL) as under:
if XXXX - Condtion here....
Populate the field HERKL in the structure BATCH_MASTER_DATA with the desired value
endif.
This will resolve the issue and we can view this Country of Origin in the transaction MSC3N.
Regards,
Vishnu.

Similar Messages

HT1918 How do you change the country or origin in the iTunes store and zero out the remaining balance?

As above.... how do you change the country of origin in the iTunes store when you already have a balance in another country, in my case the balance is $0.03. At the moment I can't change the country because of this balance and have attempted to zero it out, but no luck yet. Any suggestions?

Contact iTS to have them cashout your account, and aid in changing the nationality.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

My wife and I want to swap her 4s for my 4 while a take a short trip out of the country. We use the same email address for itunes but different for email. Can we just change our phone numbers and email addresses so we get our own messages?

My wife and I want to swap her iphone 4s for my iphone 4 while I take a short trip out of the country. We use the same itunes account but have different email accounts. Can we just change our phone numbers with our carrier and change email addresses on our phones so we get correct messages, with out disturbing our other apps?

The email is simple. Just delete her email acoount on her iPhone and configure your account into the phone and then do the same for her on your phone.
The harder issue is that to switch the cellular phone service you will need to switch the SIM cards and the two phones do not use the same size SIM card.

How to track my stolen ipod only using the serial number

I had my iPod stolen from me sometime within the last week. I changed my iCloud password tonight & I was just wondering if there is any way I can track it using the serial number because I did not set up "find my iPhone" before it was stolen. It was not locked (the password when you first turn it on.) Please help me! I still have one year warranty on it too. Can anybody tell me how to go about fixing the problem? I have serial number if you can track it that way. Please get back to me with your responses asap . thx

No. The SN will only help idenitfy the iPod as yours if it is recovered.
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How do I restore vista to original using the on-board recovery drive?

I have a CQ60-410US Notebook Pc (HP of course), but recently it will not start normally. It launches the repair module, then says it can't repair the computer automatically. I go back to the screen where there is an option to start Windows normally, select that and it starts up.
What gives with this crazy machine?

Hi,
You can refer this link to perform recovery:
Recover Windows Vista Operating System Using HP Recovery
Things To Do After Performing a System Recovery in Windows 7 and Vista
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

HT204411 My boss gave ma a gift card but I can not use it in my country, how can I change country to star using it?

My boss gave ma a gift card but I can not use it in my country, how can I change country to star using it?

You cannot change your iTunes country unless you are really moving to another country, nor can you change country association for a gift card. Give it as a gift to a friend who lives in the country of origin for the card.

Customs Duties based on Country of Origin in the PO

Hello,
I would like to seek your help on pricing conditions in the PO.
We have created an access sequence for customs duty condition type ZOB1, and we used the key combination delivering country, commodity code, and the country of origin. We cannot maintain the country of origin in the material master because it is only known upon PO creation. The condition type ZOB1 is supposed to read the country of origin in the PO. Instead, the country of origin in the material master is what's being populated in KOMP-HERKL, which is the field catalog we used as part of the access sequence/condition table.
We would like the system to get the customs duties based on the country of origin entered in the PO and not the one in the material master.
Is this possible? Has any of you tried to modify the values in the structure KOMP before PO prices are determined by the system based on the access sequence?
Any inputs will be greatly appreciated.
Thanks!

Hi Lakshmipathi,
So far we are encountering 2 incorrect deliveries in production. This does not involve Sales order but Purchase Order. I tried to check the country of the Supplying Plant and the country is not the country reflected in the delivery. It is expected that the country of the supplying plant must reflect in the delivery. Checking the PO, it is not also getting the correct country but it is getting the country of the receiving plant. We got confused why it is getting the country of the receiving plant.
Thanks,
Rish

GR/IR accounts based on the country of origin

Dear All,
My client business requirement is like below:
when we are posting goods receipt GR/IR account has to be posted based on the country of origin of the materials. we have one chart of accounts, we don't have any business areas. we have defined 14 GR/IR accounts for this purpose.
Please any one can suggest me the solution in SAP, how we can do? even customized one also?
thanks & regards,
Ramesh B

uu

How Can You Track Your Ipod If Lost Using The Serial Number

How Can You Track Your Ipod If Lost Using The Serial Number?

The find my iphone app has nothong to do with it.
That app simply allow you to find other devices using your ipod. It has nothing to do with fining the device on which it is installed.
If you set up the find my ipod feature that is built into your ipod and the ipod is on and it is connected to wi-fi and it has not been restored, then you may be able to get an approximate street address using icloud.
Othrewise, it cannot be tracked.

How to Update the Country Of Origin In delivery Item

Hi All,
Business Requirement at Present: in the idoc we are not passing the country of origin for updating the Delivery Item data .But Business requirement is now in such a way that the country of origin has to update the delivery item from the idoc. when i look into the Process code function module i found this function Module Z_IDOC_INPUT_DESADV2. the i found one more function Module which will update the PICK/Packing WS_DELIVERY_UPDATE which is inside that. i am unnable to update the country of origin with this FM. so please send me the best soultion.
way to see the country Of Origin :
go to Delivery > Double click on the Delivery Item > chose the Tab "Foreign Trade/Customs" > with in this Tab chose sub tab "Origin / Destination / Business">> Ctry of origin , Dispatch ctry,Region of Origin
with Regards
Ram

Country of Origin for a Delivery item is passed during the packing of the delivery before shipping .
This is a mandatory field keeping the priority high.
Actually this has to be done from one of your pack programs (A Z pack program i dont know the scenario of ur project )lets say .
So u can see this Country of origin in the material views ..
Goto MM03 and in this give the material item and check this.
Check Sales: general/plant data and the strip as Origin.
The field will be Marc-Herkl.
Now u if want this to be populated then u need to write a query or logic to resemble the same in the delivery item.
Now to get to your query now ..
So if ur idoc will not be passing the country of origin .. then how was it doing earlier ?
//But Business requirement is now in such a way that the country of origin has to update the delivery item <b>from the idoc</b>
In order to do this we need to enhance the idoc with one more feature by picking thcountry of origin field say from MARC-HERKL and then updating the line item into the code of ur Z_idoc_input... or an user exit which can do the same ..
Just check in ur idoc what are all the fields u r picking ..
and what is the standard inound idoc you are referring to so that u can find the appropriate Customer exit which will be there to do the same ..
The logic has to be written in one of the customer function .
regards,
VIjay

I lost my I phone 4 , how to track it's imei number from the apple id that I used in that lost iPhone

I lost my I phone 4 , how to track it's imei number from the apple id that I used in that lost iPhone

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, and running iOS 7.0, then phone cannot be activated or the passcode removed without knowing your Apple iD/Password. It will be nothing but a useless paperweight.
If not running iOS 7.0, the phone can be forced into recovery mode & restored.

HT4061 how would i know if the iphone is fake or original using the serial #

how would i know if the iphone is fake or original using the serial #

Connect it to your computer and see if iTunes recognizes and connects with it.

I no longer have the computer I originally used to update my iphone. How can I update my iphone on new computer?

I no longer have the computer I originally used to update my iphone. How can I update it to my new computer?

see this documentation by one of our fellow users syncing to new computer http://discussions.apple.com/docs/DOC-3141

How is the Country of Origin field populated in the OITM?

Dear All,
I can see this column in the table but not in User interface. We are in CA and US localization. Thanks a lot.
Regards,
Yuka

Hi,
The country of origin does not appear on the interface but is available on the backhand ie. tables.
If the field is a requirement you can check the following workaround in the test enviorment :
- create udt for the countries
- create udf on item masterdata -> set udt as linked table
- create udf on Marketing Documents Row-level -> set udt as linked
table as well!
- save following query and attach as formatted search to udf
- on Marketing Documents Row-level:
- SELECT udf FROM OITM WHERE ItemCode= $[$38.1.0] FOR BROWSE
- set to autorefresh on "when existing altered column", Item No.
in documenttemplate choose as Datafield
File: UDT
Field: Name
tick "Display Description"
Check if the above helps.
Kind Regards,
Jitin
SAP Business One Forum Team

How can I attach an image without the image is in the email body? (using the new mail the Lion)

How can I attach an image without the image is in the email body? (using the new mail the Lion)
I want in attachment, not in the body mail.

I think your only solution is to zip the image files first and then attach them.
Read this from a site I found:
Sending Graphical Attachments -- When you attach a graphical image to your message, the recipient of your message sees the image inline (that is, in the body of the message) if her email client supports inline display. ("Take Control of Email with Apple Mail" contains a table listing the capabilities of popular Mac and PC email clients.) If a client does not support inline display (or the recipient has turned off the inline display option), the file appears as an attachment that must be opened in a separate program.
On the one hand, an inline image is easier for the recipient to see - all she has to do is look at it. On the other hand, inline images can be frustrating to scroll through. If you do not wish to send a graphical image inline, you must compress the file before attaching it - Mail, sadly, lacks a built-in compression option, though fortunately for Panther users, the Finder offers Zip compression without requiring a separate application.
Note that when you compose a new message, Mail always shows attachments in the body of your message. You can manually drag them somewhere else, but many email clients display all attachments in a separate list, regardless of where you place them in the message body.
If you paste an image into a message or drag & drop an image from another window (say, a Web browser), Mail converts the raw image data to an attachment in TIFF format. On the other hand, if you drag & drop the icon of an image file (or use the Attach button to locate the file using the file browser), Mail leaves the attached image in its original format. This difference is significant, because although most email clients can display JPEG images just fine, support for TIFF - especially in non-Mac email clients - is less common. If possible, I suggest attaching image files as opposed to pasting or dragging in raw image data.

How to track the Country of origin using the tcode 'MIGO_GR'

Similar Messages

Maybe you are looking for