How to transfer waveform data to a sub vi

I am trying to see plots in a subvi when I want it. In my test, the waveform chart in the main VI displays multiple plots of channels as I expected, but the subvi only shows a single plot. Program attached.
I can simply convert the dynamic data to numeric 2D array to display multiple plots, but I will loss the time stamps which I really want to show in the plot as the one in the main program.
Thanks
Solved!
Go to Solution.

hrwang wrote:
Thanks. I tried to follow your instructions.
Actually you didn't. You didn't create an indicator of waveform arrays to copy over to the subVI to be a control of Waveform Arrays. See attached subVI that I modified.
However, it still shows one plot in the sub vi, and plot starts from time 0. The new program is attached.
That's because you created a 1-D array of doubles which means only 1 plot and no timing data
I think 2D array are needed to have multiple plots.
No. A 1-D array of waveforms can be used for multiple plots.
I want to run the program for days, so it is convenient if I can see the date/time in the x axile, as the one in the main program, instead of starting from time 0. Dynamic type of data is complicated and I don't want to deal with its structure, that's why I use a waveform chart as control, hoping the whole information of dynamic data is transferred to subvi plot correctly. Apparently, it didn't work.
If you don't want to use dynamic data, then don't use the DAQ assistant. The DAQ assistant is what is giving you the dynamic data. I see you did to a conversion from DDT to a 1-D array of waveforms which is good. Now you just need to send that 1-D waveform array to the subVI. Because you used a 1-D array of doubles in the subVI, you have a conversion dot.
Any solutions?
thanks again.
Attachments:
PlotMOD.vi ‏14 KB

Similar Messages

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.

Me and my partner are currently using the same apple id and have no space left on our devices. We are currently waiting on the iphone 6 plus to arrive and don't know how to transfer all data to the new phones.?

I don't know if I'm asking this all in a way that can be understood? Thanks ED3K, however that part I do understand (in the link you provided!)
What I need to know is "how" I can separate or rather create another Apple ID for my son-who is currently using "my Apple ID?" If there is a way to let him keep "all" his info on his phone (eg-contacts, music, app's, etc.) without doing a "reset?') Somehow I need to go into his phone's setting-create a new Apple ID and possibly a new password so he can still use our combined iCloud & Itunes account?
Also then letting me take back my Apple ID & password, but again allowing us (my son and I) to use the same iCloud & Itunes account? Does that make more sense??? I'm sincerely trying to get this cleared up once and for all----just need guidance from someone who has a true understanding of the whole Apple iCloud/Itunes system!
Thanks again for "anyone" that can help me!!!

HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER

제품 : FIN_GL
작성날짜 : 2006-05-29
HOW TO TRANSFER HISTORICAL DATA FROM ONE ACCOUNT TO ANOTHER
=============================================================
PURPOSE
특정 기간의 Balance 를 Account 별로 Transfer 하는 방법에 대해 알아 보도록 한다.
Explanation
GL 의 Mass Maintenance 기능을 이용하면 한 Account 에서 다른 Account 로 혹은 Multiple Account 에서 다른 하나의 Account 로 Balance 를 이동 시킬 수 있다.
1. GL Responsibility 에서 Other> Mass Maintenance 를 선택한다.
2. Move/Merge 작업을 위한 Request Name 과 Description을 입력한다.
3. Request Type 으로 Move 혹은 Merge 를 선택한다.
4. source-to-target account 를 위해 line number 를 입력한다.
5. LOV 에서 source Account 를 선택하여 입력한다.
모든 Account 는 enable 상태여야 한다.
6. target account 역시 LOV에서 선택하여 입력한다.
7. 지정한 작업을 수행 하기 전에 먼저 확인 작업을 할 수도 있다.
8. 작업한 내용을 저장한다.
9. Move/Merge request 를 수행한다.
Example
N/A
Reference Documents
Note. 146050.1 - How to Transfer Historical Data from One Account to Another

Follow the directions here:
http://support.apple.com/kb/HT2109

How to transfer the data from R/3 to APO

Hi Gurus,
How to transfer the data from R/3 to APO.
I do have 4 Ztables in R/3 can I pass this Ztables data to APO when sales order is created in APO .
Thanks & Regard,
Mohammed Ali.

Welcome to SDN.
refer this link
creating integration model
Give ur mail id i will send the document which i have.
With regards.
Maya.

How to transfer table data from one client to another client?

How to transfer table data from one client to another client?

Hi,
Look at the Blog
/people/community.user/blog/2007/01/07/transport-table-entries
Regards
Sudheer

How to transfer icloud data from old computer to new computer

how to transfer icloud data from old computer to new computer

The iCloud data will be on the new computer as soon as you download the iCloud control panel and sign into iCloud with your iCloud ID. What you see in iCloud is stored in iCloud, so it really doesn't matter what computer you are on. Once that computer is signed onto iCloud and the iCloud options are selected, you have full access to all of that information, and much of it is pushed back to your computer.
If you are referring to the data in an iCloud backup created by an iOS device, then that is not something that would be on a computer at all.
Does that answer your question? If not, post back with more info about what you are looking to find out.
Cheers,
GB

Does anyone know how to transfer my data from iphone to my new laptop?

Does anyone know how to transfer my data from iphone to my new laptop?

The iphone is not a storage/backup device.
You need to copy everyhting from your old computer, or your backup copy of your old computer, to your new one.

The "infallible" backup system crashes and burns; how to transfer the data?

After five years of exemplary, error-free service, my old Powerbook G4 1Ghz finally crashed during a backup to an external hard drive. I just bought a new Macbook Pro (arrived September 16th) and want to transfer the data from the old Pro to the new Pro. Herein lies the complex problem, and Migration Assistant and a firewire cable won't solve it.
When the old Pro died, I was maintaining what I believed to be an infallible backup system (ha). I did nightly backups to two different external hard drives; one was a USB LACIE drive, the other a firewire LACIE drive. I used Carbon Copy Cloner to do a merge contents backup on the USB drive and a file-level bootable clone to the firewire drive. Surely nothing could go wrong. Oh, one only needs to think of the Titanic and say, “Something did.”
The old Pro could only backup to the USB drive when using an express card that added USB 2.0 connections (the old Pros have USB 1.1 and they’re too slow). But whenever the express card was plugged into my old Pro and it fell asleep without my first powering the card off, the computer crashed. This was no problem; I just powered off the card before putting it to sleep and ignored the fact that the computer on rare occasion acted buggy with the USB express card plugged in. Well, on the fateful night in question, the computer did its backup to the USB drive and then fell asleep while it was still plugged in (this is what its energy saver told it to do, unfortunately). When I tried to turn the computer back on, a black box appeared in the upper left hand corner with a bunch of random-seeming white text and the concluding message, “Waiting for remote debugger.” The computer was frozen and a cold reboot was the only option.
My old Pro would never be the same again.
I tried to boot it up. Sometimes it did so, but then would suddenly show a red screen and crash. It kept crashing, sometimes just powering off immediately. So I brought out good old Disk Warrior, booted up with that, repaired permissions, repaired disk, and rebuilt the directory. I also booted up with the Tiger OS X install CD and fixed permissions that way just for good measure. The computer then started up fine. I thought I was back to normal! Celebration time! Not. The USB drive that I had backed up to would not mount anymore. So I, seeing that the computer appeared to be back to normal, just plugged in second external hard drive--the firewire--and began the bootable clone. It delved into making the clone without a hitch and I went off to work happy and content that I would have an up-to-date backup soon.
Lo and behold, when I came back from work, the backup to the firewire drive hung midway through. It had done nothing but wiped the entire drive and copied about 500 mb of data to it before freezing. I tried again several times and, believe it or not, only got vastly improved results when the offending express card was actually plugged into the computer. By this mysterious and probably risky method, I was able to get some data off. But only about 1/10 of the whole. The old Pro always would crash before more than 5 gigs of data or so can be transferred.
Starting from around that time, the offending old Pro began to exhibit hideous popping, gurgling, grating, clicking, swiping, and other sounds from the left hand side of the computer—where I imagine the hard drive is. These sounds can be quite loud and sometimes even sound like tempered UFO tones beamed down to the computer. Sometimes they aren’t present at all and the computer acts fine, until a certain file or folder is accessed, and then they start again and the computer hangs, going from fine to disastrous in an instant.
I took out the offending express card and launched it away and took the USB drive and put it on another computer. It still would not mount. I finally got it to unlock (it’s a fingerprint-access safe drive) and ran Disk Warrior on it and was able to get as much data off it as I could. But it appears that a huge chunk of data was simply missing from the drive, whether from Disk Warrior having to delete data when it rebuilt the directory or from damage when the computer died while backing up to this drive, I don’t know.
So now I went from a supposedly infallible backup system of two rotating external hard drives to potentially losing 5 years of utterly critical work!
I tried starting up the old Pro in target disk mode with my new Pro. At first, this appeared to have very promising results because there was no grating or popping sounds from my old Pro when I did this. I began a data transfer with glee. But no luck; the old Pro always eventually hangs and the new Pro doesn’t even recognize it (the icon for the old Pro disappears as if I unmounted it).
Sometimes the Old Pro can still boot up and seem to act fine; it can sit like that indefinitely, I'd guess; but if the disk is actually read and written to enough, it always fails. I am using it as little as possible now (i.e. not at all) so as not to exacerbate the problem any more than it already has been.
Two quick notes that might further explain the situation: two weeks before the crash happened, I used iDefrag to defragment the drive. The night before the crash happened, I did a lot of work on my computer while on a bumpy trip on the Long Island Railroad. The computer acted fine throughout all this, but perhaps the bumpiness or the defragmentation contributed to this problem.
I must get the data off. This dead/dying hard drive doesn’t just contain mere photos and music libraries and nifty applications. I’m talking completed and incomplete novel manuscripts, lecture notes, lesson plans, published and to-be-published articles, a massive thesis, and much more totaling literally thousands upon thousands of pages and representing more than 5 years of graduate and professional research and work. For me, the stakes are critically high. Thank you for reading this Hero's Journey of a post.

Good news!
Imagine a Venn diagram with four interlapping circles. The circles are:
1. Catastrophically exploded hard drive
2. Catastrophically annihilated external hard drive used for incremental backups
3. Catastrophically wiped cleaned external hard drive used for bootable clones
4. Email, CD, and iPod backups
With a little shake, rattle and roll and other craziness you do with a hard drive with failed bearings, I got #1 working briefly, thank goodness.
With Disk Warrior and figuring out how to surpass a fingerprint-activated security feature, I got #2 working in a limited fashion.
With some workarounds, I got some use out of #3.
#4 just is.
The interlap of these 4 things produced about 95-99% or so of my data, including all critical items. It was a disorganized mess I just spent two days organizing, but I am back up and running without having to use expensive data backup services. I am slightly bothered by that slight bit of missing data, but from what I can tell, it amounts to nothing more than a brief sketch of a lesson plan, a song or two from the iTunes store, and maybe a handful of attachments. Nothing to spend big bucks recovering, in other words.
Now I will substitute my "infallible" backup system with a new one:
1. Time capsule/time machine
2. Complete online backups with Mozy
3. Occasional bootable clones to the external hard drive I have that didn't get damaged.
I think this will be the ticket!
Thank you all.

How to transfer app data between two different game center accounts?

Hello, I really need some help.
I have looked all over the web for ways to transfer apps between two different game center accounts and different devices. Several weeks ago I started playing Campus Life on my relative's Ipad 2, therefore spending many long hours to get to this point in the game.
The problem is I just got an Iphone 5 and I really would like to transfer the data onto it, so that I would not need to start all over again.
My grandma has an account (Game Center) onto which the data has been saved and I would like to have it stored onto mine. On some forum someone said to sign into the account which has the data on both devices and to then open up the game on the new device. It worked. Then I signed out and logged in with my own account- the game started from scratch. I panicked. I went back on the other account, and the data reappeared. I have been going back and forth, the game changing as many times. I thought it would ask to back up my grandma's data on mine but I was wrong. I can not seem to save the game onto my new account, and I have even tried to back it up to Itunes and then copy it onto my phone after having signed into my own account. And I don't know how to properly use Icloud. I am a mess. I am completely lost and have found no help on the web. (All people seem to have to deal with is sharing Apple IDs with different Game Center Accounts for the kids and transferring apps from one of their devices to another.)
I am so worried I am going to mess up and will lose the whole thing completely.
I have just started another game with my own account but since I am using my grandma's, the data is erased. It's one or the other but I definitely prefer saving Campus Life. I do not like the idea of having to only pick one.
I do not know any technical terms, so if you understand or even have the slightest clue about what I am talking about, I applaud you.
This seems like mission impossible, so if anyone can help in any way, I would be really grateful.
Thanks in advance for your time and thoughts!

I meant to press on "This solved my question"... Sorry if you needed the points.
Thank-you and I will just go back and forth between the accounts.

How to transfer my data to the Internet

Hello everyone !
Because we share one router,so when I use the method InetAddress.getLocalHost(),I get my ip is:192.168.1.100.
My question is how can I find my real Internet ip,not this local ip,because I want to transfer my data on the Internet not on the Intranet.
Can anyone help me,please?
Thank you very much.

You only need your external IP address if you expect people to connect inbound to you. And even then you need to setup port forwarding or similar on your router. If you're just connecting out, you should just be able to go ahead without worrying. If you can't there's a setup problem with your router or you're on a corporate network which explicitly prevents you doing what you want, or there's some kind of proxy you should be using or something like that.

How to transfer classification data (class type 001) in ecc to crm

Hi. dear
I have a problem in transfering classification data (class type 001). we use classification data in material (mm01) in ecc, class type is 001, but now I have to transfer the classification data to crm.
i had downloaded the CLASS,ATTRIBUTE and OBJCL,MATERIAL,but i don't see classification data in crm.
please let me konw :
(1) how can i transfer classification data (class type 001) to crm.
(2)how can i see these data in crm
thanks
zong

first, very thanks , i had seen the note 428989, but, i wonder if there are other method to resovle the problem.
In ecc, the classification data have many charicter ,but ,in crm, how can i display the classification data . in product data,of crm, i cannot see any tab to display the data. what can i do in crm to display the classification data.

Please advise me how to transfer my data (phones contacts)

How to transfer data (phones contacts / notes pad) from 3Gs to 4S?

Read this carefully...
Old Phone to New Phone
http://support.apple.com/kb/HT2109

How to export waveform data into text file

Hi..
I am trying to export my waveform graph data into write spreadsheet file. When running the proram, I am getting graph values (values in a matrix) when checking with the probe. But once I save it to a text file, the values recorded are just zeros. I have attached the text file along with this. Could anyone please tell me why the graph data is not recorded in the spreadsheet? I have extracted the Y component of the graph and then wired it to the write to spreadsheet function. It seems like the labview is getting the data.. but now the problem is how to get the data out of labview?

Please find the attched image of the whole program. I tried running the program after removing the array to matrix but still I am not able to export the graph values to spreadsheet. The program as a whole is working as I am able to display the oscilloscope graph into the waveform graph but I am not able to export the values. When I tried using probes, I am getting differnet matrix values till the end of the connection given to 'write to spreadsheet' but not able to export the values. The second image shows the write to spreadsheet file inside the while loop as i thought it will reduce the memory.. but it is still not working...
Attachments:
Scanner complete program.jpg ‏713 KB
full scanner program 2.jpg ‏664 KB

How to transfer whatsapp data from iPhone 4s(iOS6) to iPhone 6(iOS8)

I just bought the new iPhone 6 and managed to restore all of my data from the iPhone 4s.
But i'm not able to transfer the whatsapp data.
When trying to backup from whatsapp chat settings it stays still at 0%.
I'm not able to transfer using iTunes method or iCloud method.
Could someone please give me suggestions on how to migrate this data??

Hello Ram226,
Thank you for using Apple Support Communities. You can take a look at this article for some troubleshooting suggestions. While the article mentions quitting, not responding or not opening, it can also apply to not functioning as expected.
If an app you installed unexpectedly quits, stops responding, or won’t open - Apple Support
Regards,
Jeff D.

How to transfer memry data from old to new wireless device?

How to transfer data memory from olds to new ddevice?

What type of data? Contacts? Photos? Music? Email?

How to transfer waveform data to a sub vi

Similar Messages

Maybe you are looking for