How to translate all my screen to Farsi language.

Dear SAP guru's,
i want to traslate some SD MM FI applications screen to Farsi language in ECC 6.0.. ours is a unicode system..
1) what are the basis settings required?.
2) what are the patches need to be applied?.
3) how to change the words when sap does not supports it..
4) how to use this language convertion?. how to implement this?.
<removed by moderator>
Thanks and Regards,
GSANA
Moderator message: not directly related to ABAP development, please look for available information, e.g. in the Netweaver Admin forum.
Edited by: Thomas Zloch on Dec 16, 2010 4:31 PM

Hi,
You need to install the language from SMLT transaction and then you need to set language parameter in RZ10 in instance profile and then give a system restart. By this way, you can install the language.
Thanks
Sunny

Similar Messages

  • How to fit all browser screen?

    Hi,
    I designed a webpage by using iweb. I used HTML snippet to input my HTML code. However, different screen resolution PC or browser will display my webpage size and layout differently. Any idea how to solve this?
    Besides, I noticed that webpage created by iweb only best view in Mac-Safari browser only. Most of the nice font in iweb couldnt display at other browser.
    Please advice.

    An iWeb page has a fixed width and height and is also centered in the browser window.
    Nothing you can do to change the optical illusion when viewed in different screen/browser window sizes.
    When you use a nice font on a webpage, the font has to be on the visitors computer as well.
    If not, the browser uses a font that is closest to your font.
    Use websafe fonts. The interwebs knows what that means.

  • How to clear all selection screen parameters before calling transaction?

    Hi Experts
       I have a ABAP report that displays data using ALV.
      When I double click a cell it calls transaction MB51. Before calling the transaction I need to set some parameters of the selection screen  of the transaction.
      My code is like below:
      <UL>
       <LI>FREE MEMORY ID 'MAT'. <I>"material</I>
       <LI> FREE MEMORY ID 'WRK'. <I>"plant</I>
       <LI> FREE MEMORY ID 'CHA'. <I>"batch</I>
       <LI><I>* Get the selected ALV row data</I>
       <LI>READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
       <LI><I>*   If link MB51 is clicked then open tcode MB51</I>
       <LI> IF p_selfield-sel_tab_field+8(4) = 'MB51'.
       <LI><I>*   Pass material, plant to the corresponding tcode</I>
       <LI>       SET PARAMETER ID 'MAT' FIELD x_recon-matnr.
       <LI>       SET PARAMETER ID 'WRK' FIELD p_plant.
        <LI>      CALL TRANSACTION 'MB51' AND SKIP FIRST SCREEN.
    </UL>
    The problem is:
    <UL> <LI> 1. First, I run the given transaction before running the report in a separate session with some set of values in the selection screen. For example: plant = AB01, Material = 990001 and Batch = 10001.</LI>
    </UL>
    <UL>
            <LI> 2. Then in another session I run my report. In the report ALV I have selected a record where plant = AB01, Material = 990001 but Batch is blank. But it opens the transaction with plant = AB01, Material = 990001 and Batch = 10001.
    Even though in my ALV record the batch is blank yet it uses the batch value from the memory. That is, the batch value that was given in the transaction earlier. Why it is not getting cleared? I have also used FREE MEMORY ID code in the beginning. But still it is not clearing the values in the memory.
    </UL>
    <UL>
            <LI>What shall I do to clear all the selection screen parameters before calling the transaction?</LI>
    </UL>
    <UL>
            <LI>
    Thanks
    Gopal
    </LI>
    </UL>
    Edited by: gopalkrishna baliga on Aug 11, 2010 10:29 AM

    Its because sap memory is globally shared.
    Do it like this.
    READ TABLE i_recon INDEX p_selfield-tabindex INTO x_recon.
    IF p_selfield-sel_tab_field+8(4) = 'MB51'.
    perform bdc_dynpro      using 'RM07DOCS' '1000'.
    perform bdc_field       using 'BDC_OKCODE'   '=ONLI'.
    perform bdc_field       using 'MATNR-LOW'  x_recon-matnr.
    perform bdc_field       using 'WERKS-LOW'  p_plant.
    perform bdc_field       using 'CHARG-LOW'  p_batch.
    perform bdc_field       using 'DATABASE'  'X'.
    call transaction 'MB51' with i_bdcdata mode 'E'.
    endif.
    form bdc_dynpro using program dynpro.
      clear la_bdcdata.
      la_bdcdata-program  = program.
      la_bdcdata-dynpro   = dynpro.
      la_bdcdata-dynbegin = 'X'.
      append la_bdcdata to i_bdcdata.
    endform.
    form bdc_field using fnam fval.
        clear la_bdcdata.
        la_bdcdata-fnam = fnam.
        la_bdcdata-fval = fval.
        append la_bdcdata to i_bdcdata.
    endform.

  • How to Translate the Title bars into other languages.

    Hi,
    I have created a titles using the SET Title statement.  I want to translate the title into other languages.  Please help me ASAP.
    Thanks,
    Sreenivas.

    Hi,
    From SE38, GOTO (from menu bar)-->translation.
    Regards,
    Jyothi CH.

  • How to make all fields mandatory in sales order T- code VA01 initial screen

    Dear all,
    how to make all fields mandatory in sales order T- code VA01 initial screen itself
    The fields are
    Sales Organization
    Distribution Channel
    Division
    Sales Office
    Sales Group
    Regards,
    Amar Reddy

    Hi,
    You can use Transaction Variant to achieve this functionality.Please go through the following link which helps you in creating the same.
    [Link|http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation]
    Regards,
    Phani Prasad

  • How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc? Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom. All other screen functions work normally.

    How do you reactivate the grey utilities scroll up tab at the bottom of the screen that should reveal wifi, bluetooth etc?
    Doesn't matter what orientation the ipad is in, it won't scroll up from the bottom.
    All other screen functions work normally.

    Settings/Control Center. There are two options which are pretty self-explanitory...one enables/disables access on the Lock Screen and one enables/disables access within apps/games.

  • I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

    I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

    Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
    B-rock

  • How do I connect to computers that are being used in the lab, but have no address listed on the "all computers" screen and say "off line" while they are being used?

    Thanks for any help I can get.  I'm the new guy here at school, and did not set up the system, so I'm not familiar with any of the individual steps for correcting problems.  My question is listed in the window up top.
    Jim

    Thanks for the response. I tried to find out what you asked.  For example:
    1. Computer #35 is listed on the "all computers" screen but says "access denied", "not authorized",  right click for " get info" has no administrators listed, and I don't know how to add my computer as one.
    2.  "Scanner" screen # 35 is not listed either in "Bonjour", or "Local Network" (ethernet interface)
    3.  "Scanner 2" screen - same.
    4.  "Scanner 3" screen - same.
    5.  "Computer Lab" screen #35 is listed, but says "off line", "access denied"
    I hope this gives us somewhere to start and go from there.  Thanks. 
    Jim

  • MAC OSX 10.3.6 having Boot Problems(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!

    Hi Frnds,Small Favour for me,...
    MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

    Hi Frnds,Small Favour for me,...
    MAC OSX 10.3.6 having Boot Problem(Gray Screen with Spinning wheel all the Time) ,How to restore all the files without Mac Startpup Disc,still is not possible i want to download full CD from Apple Site, Is It Possible to Download!, Windows 7 is working perfectly , can i restore any files in MAC OSX 10.3.6 through Windows 7, or i need the MAC OSX 10.3.6 Bootable Files i need to enter the MAC OSX....

  • How can I enlarge the "all-day" screen on the iPhone calendar?  I use the all-day screen for all my tasks, and it only shows 2 items at a time!!  Help!!!

    How can I enlarge the "all-day" screen on the iPhone calendar?  I use the all-day screen for all my tasks, and it only shows 2 items at a time!!  Help!!!

    The iPhoto App can select all of the photos in the All Imported folder and delete them.

  • Purchase PIN is insufficient: How can ALL on-screen purchasing be blocked ???

    I set a parental PIN and purchase PIN on my set top box.  And it does block pay-per-view items.  But it does not seem to block out channel subscriptions.
    I want to disable ALL on-screen purchase options.  Is there any way to accomplish this?

    I thought the use of a purchase pin would block out all purchases.   You're pretty confident the check mark is next to use purchase pin?   
    in order to block all you can do a combination deal.  you can go through one by one to find the channels that require a subscription, jot em down on paper, and then block the channel individually through "control channels" on the parental control menu -   so find what channel playboy is on for example, and then block the two channels individually,  if you don't subscribe to premium stations you can block those out as well by channel. 
    so it can be done, it just sounds like it's a little more work than what it "should be"  
    one would think if you said purchases require a purchase pin, that it would include subscriptions.   

  • HOw to translate lables & selection field titls in diff lang for ABAP query

    Hi,
    I have one report to be displayed using sap query , in that
    I need to translate the output fields lables and fields which are on selection screen of query into diff languages like FR, IT, ES and all.
    How can I do it? Can anybody help me ?
    I found one tcode SQ07 , but it will translate only selection screen fields but even the space is limited.
    Regards,
    Mrunal

    Hello,
    For this please maintain the output field labels as text symbols.
    After doing so, choose from menu GOTO->Translation.
    Now it will ask you for the language to translate into.
    Hope this answers your query.
    -Rajat

  • How to get all files from Archive server

    Hi Experts,
    My problem is:
    When i try to read from an archived file, the moment archive_open_for_read function module is executed, a popup box appears
    asking to choose the name of the archive file to be read.
    I have to pass only one Export Parameter i.e. Archive Object.
    How to avoid the popup screen from appearing. I want to read all the archived files by default, the values are to be retrived from the archived files and displayed.
    Thanks,
    Parthow.

    Hi,
    I probably didn't understand your question, as I think my answer is exactly what you expect.
    In an archive object, you may have 1 or more files. If you want to know the list of files in the object, you have to use ARCHIVOBJECT_GET_TABLE.
    Sandra

  • How to get all the values of a variable with F4 with checkboxes to select

    Dear Experts,
    After Executing a query by giving let 3 values(Out of 10 Values) to a variable.
    To give 2 more input values to the same variable(i.e.,total I wanted to give 5 inputs this time ),after refreshing the query,for that variable if I click F4, I am seeing the historical values(i.e.,3) and remaining 7 values also But with out any Check Boxes besides them to select the 2 inputs.
    In the same F4 Screen, If I click all values(an Icon at The bottom),then also Im seeing but no check Box.
    I hve tried by deleting the Delete Personalization also,but no use.
    Please tell me How to get all the values with F4 with check boxes to select ,whatever I want??
    Thanks in advance

    Take a look at the InfoObject and go to the Business Explorer tab. If the 'Query Def. Filter Value Selection' is set to 'Only Values in InfoProvider', you're only going to get the values in F4 that exist in the InfoProvider, not everything in the Master Data. This would need to be changed to the value of 'Values in Master Data Table' if you want it to show everything possible when F4 is chosen.
    Likewise, you're going to need to look at the query and go to the Advanced tab for the InfoObject. Make sure that the radio button for 'Values in Master Data Table' is selected. If not, then you should change that selection.

  • How to get all the ID value dynamically in javascript

    Hi,
    Please let me know how to read all the id of the components dynamically from the *.jspx page in adf.
    i want to store all the values in the array of the javascript.
    Thanks

    jdev version -11.1.1.4
    use case:- we are capturing all value entered by the user on screen and storing it in the cookie like (key,value) pair where key is id and value is value of the component keyed-in.
    Later when there is browser close or transaction faliure we are retreiving back all the values from cookie on load of page.
    Now the point is when the screen loads back it is not getting the component id dynamically, we are storing manually the id's of the components to retrieve the value.
    But we want to read all the id of all the components dyanamically once page load and store it in javascript array variable.
    Let me know if there is any method to read all the id of the page in ADF javascript.
    Or any other alternative method.
    Please help.
    Thanks,

Maybe you are looking for