How to transport SAP CRM Survey questionnaires

HI Folks,
Can we transport Survey Questionnaires from Dev to QA and QA to PRD. if so do let me know the process
Thanks in Advance
Amrita

Hello SAP-friends,
Could anybody help me:
Do we have to activate questionnaire in QA after it has been activated in Dev and transported in QA by transport request.
Please, make it clear for me?
Thanks in advance!

Similar Messages

How to set value for radio button in sap crm survey suite

Hi ,
I created a survey in CRM Service, in which I added a question with answer as '10 Selection Button Group ('radio button'). And answer has 11 answer options (which means 11 radio buttions). Now when we test the survey, the value for the radio buttons is appearing like 'id_0050569b03091ee480a29d8ee61e953c'. But i want to set a specific value for each radion button (from 1 to 11). So, how to set value for radio button in sap crm survey suite???.
Thanks & Regards,
Seshu

Hi,
I found solution myself. Click on Goto -> Editing Mode -> Expert Mode. Now you can set value for radio button.
Regards,
Seshu

Can any body tell me how to pull SAP-CRM data into BW

Hi BW guru`s,
Does anybody tell me how to pull SAP-CRM data into BW.
Is there any configuaration setings takes place in CRM system or BW system?
Provide few of CRM datasources names (Transaction data Datasources)
Please explain indetail and give some examples.
Thanks in advance,
venkat

Hi.......
SAP CRM uses BW Adapter to extract data from SAP CRM and send it to SAP Business Information Warehouse and SAP NetWeaver Business Intelligence. For mBDocs, BW Adapter extracts objects for CRM business transactions and CRM billing use the BAdI CRM_BWA_MFLOW. However, in releases prior to SAP CRM 2005, after using transaction code RSA5 to activate business content in SAP CRM, you must use transaction code BWA5 to activate the business content for the BW Adapter.
Check this link :
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Hope this helps you.........
Regards,
Debjani........

How to logon to CRM survey as marketing contact?

Hi experts!
In SAP Help I found this statement:
....When the recipient enters this URL in a Web browser, a survey is displayed. The recipient completes the survey and sends it (by pressing the u2018Saveu2019 button) to the companyu2019s SAP CRM system. The system then uses the answers specified in the survey to determine appropriate additional marketing activities for the original recipient of the e-mail.
I would like to implement this.
My question is: How does a marketing contact (maybe one of ELM) access the survey? Does he/she need a user or internet user?
Could you please describe me the standard solution?
Thanks,
Cristina

I'm not sure if Raja and I are understanding your question the same way. But, we needed to send survey's to our ERP users and of course, they don't have a CRM login. So, we created an anonymous user for the crm_svy_server service.
Again, we're currently using CRM4, so settings might be different...we haven't got to this point yet in our CRM6 upgrade.
Be sure the anonymous user (SURVEY_USER) has authorizations to only complete a survey...set them up as a Service user, not Dialog. I had to have our Basis people do this for me, but it allows the user to submit the survey without having to log into the CRM system. Keep in mind, that this anonymous user must be set up very carefully to not allow access to more of your CRM system than you intend...this is the part of the setup I needed help with from our Basis folks.
ICF path: /default_host/sap/bc/bsp/sap/
ICF Object: crm_svy_server
The MIG tracking ID is what CRM reads and attaches the survey respons(es) to the proper contact person, not the anonymous system user.

How to transport SAP QUERY

Hi All,
We have created some SAP QUERY through Transaction SQVI,but not able to transport it to the Production system.Can anyone help me telling how to do that?
Thx in advance.
Atrai.

Hello,
To convert Quickview made in SQVI to Query, follow these steps:
1. Go to Sq01. First select user group in which you wnat to create your query, then go to Query > Convert QUickview
2. Give your QUickview name, press enter
3. Give your query name and FUnction area . Press enter, quickview is now created in Qurey
4. Then Run RSAQR3TR, give your query and functional area. Run the report it will create a TR.
Regards,
Naimesh

How to transport SAP Query SQ01??

Hi All,
I am faced with a proble regarding the transportation of SAP query from the development system to the Production system.The following were the steps that I had taken:
Step 1. Run RSAQR3TR in 'old' system. Select EXPORT and specify the
objects to be transported.
(System includes these in an automatically created transport request)
Step 2. Release this transport and request it be transported to 'new'
system.
(This results in the entries being populated in transport table AQTDB
in 'new' system).
Step 3. Run RSAQR3TR in 'new' system. Select IMPORT and tick the
Overwrite checkbox. Specify the transport number in the field labelled
'dataset with imports'.
After I had done all these ,the changes were not reflecting in the test system.
Is there any steps missed ou in the transportation process or is there any other way of transporting the same???
Thanks and regards,
Rupesh

Hi Rupesh
run the program one emore time with
specifying Copy Standard Area -> Global Area.
regards
kishore

CRM SURVEY - questionnaires (Ratin Factor)

I need to recover the value of each pregunta(Rating Factor) and respuesta(Rating) of each cuestionatio, to create a estadistico of surveys I hope that puedeas to help me. Thanks.
Necesito recuperar el valor de cada pregunta(Rating Factor) y respuesta(Rating) de cada cuestionatio, para crear un estadistico de encuestas.
Mensaje editado por:
Raul Alvarado

Ok

SAP IS/CCS OR SAP CRM

HI TO ALL...
We are implementing SAP IS/CCS for one of our
client.For interaction center whether to go with
SAP IS/CCS OR SAP CRM any how client has SAP CRM
server too.
please advice us.....
and

Hi Abdul
salam
Thanx for reply...
But do u think SAP IS/CCS provides...
All functionality as of SAP CRM??
For example scripting is not supported in
SAP IS/CCS?
Then what would be u r comment in this case
Regards
appa

Processflow in sap crm

HI,
I am interested to learn about what is the general process flow in SAP.(SAP CRM) . Could anyone tell me
how does a sap crm entire process is carried out.
Thanks in advance.
Regards,
sasi_s.

Hi Sasi,
This link would give you a fair bit of idea w.r.t. the process flow for sales order processing with billing :
http://help.sap.com/saphelp_crm40/helpdata/en/9e/ce943b00ce6622e10000000a114084/content.htm
Thanks,
Rohit

How do I save personalised survey answers in CRM

Hi experts:
In SAP Help I found this statement:
...When the recipient enters this URL in a Web browser, a survey is displayed. The recipient completes the survey and sends it (by pressing the u2018Saveu2019 button) to the companyu2019s SAP CRM system. The system then uses the answers specified in the survey to determine appropriate additional marketing activities for the original recipient of the e-mail. ...
I would like to implement this.
How exactly does the recipient send the survey to SAP CRM system? I know that PAI can create a document with survey in CRM. In this case the survey is linked to an email. I have never seen loose surveys (without document) in CRM.
Am I supposed to have an integracion with an contact of type email where the survey answers will be saved in case the marketing contact anwers the survey?
Hoping for your help.
Thanks,
Cristina

Hello,
First of all, I am not sure in which scenario you are using. In my earlier reply, my answer was broad too since i am not aware of which scenario you are using.
Your survey attribute might be having PAI module attached which creates/changes a lead on checking the process mode. Process calls CRM_SVY_LEAD_PAI_CREATE to create a lead.If this is not successful, it will raise the message to stop.
Therefore, You should also check if you create a lead through crmd_order Is it created error free?
one more point is: You can not use Lead survey and Lead PAI/PBO for URL.Sending an url to a business partner is a Marketing scenario hence only marketing survey and PBO/PAI should be used.
Lead survey and it's PAI/PBO should be used only when you create lead in crmd_order transaction and want to determine the relevant survey during creation.
Do you want to create lead through campaign execution or want to use Campaign automation application for the same ?
If your scenario is to send an e-mail to a business partner and as soon as he replies to the response , for each reponse you want to generate a lead.
For above scenario, you have to model the scenario in campaign Automation application.
Hope this helps.
Thanks
Raja
CRM Marketing Forum Moderator

Step by Step how we can connect SAP CRM to External system..

Hi Experts,
I want to know the informations of how we can connect sap CRM to External system, and what are the settings we have to do ,to enable XIF adapter..
This is very imp requirement kindly give support.., how we can connect to other system..through XIF Adapter..??
IS it possible to create ZBAPI in SAP CRM..?
Thankz in Advance
Regards
J Sarathi

Hi,
- Xif adapters and service process the BDOC messages.
- adapters for inbound and outbounfd processing.
-it will forward the messages from the inbound queues to the control component.
-BDOC is a business document where the flow of data to and from the CRM system takes place.
-Bdoc is a container that contain business data
- it describes the hierarchial structure of the business data.
-you can also create custom specific BDOC types,
-BDOC's as a data container to process business objects as one unit and this avoid having to transport several individual tables.
Bdoc types are found in BDOC repositry.
Bdoc types have two part
Header- consist of one single segment so-caooed control segment
Body - consist of one or more data segment
Idoc having three types of data:
control record
Data record
status record
hope it will useful.
thanks
Hemant ghiya

ICI - How to display custom error messages in SAP CRM

Hello,
we are working on a custom Contact Center which interfaces with SAP CRM Version 7 with Enhancement Package over ICI.
The basic call functions like accepting, hanging up, holding and retrieving are fully implemented and are working already.
Our goal is to display error messages in the CRM so that clients know there is something wrong, for example why he can't be log in successfully (e.g. the telephony server isn't reachable).
We already found the ICI Documentation file which provides us the CRM SOAP error codes and tried to send SOAP Fault messages, but never got
them to screen.
Please find an attached example screenshot what we mean exactly, reproduced by trying to make a call with CRM user while BCM CDT isn't
running in the background.
Regarding to this topic we've the following questions:
- Is it possible to display custom error messages on the CRM or is this functionality limited to SAP?
- Could you provide us some further information on how to use this feature exactly (implementation details?) and how the SOAP XML should look like to get it work?
Thank you in advance!
Best regards
René Holy

NewUser7 wrote:
Please correct me if I am wrong
I need to create an entity adapter and attach an error handler with the adapter? or can i handle that in the event handler itself. I coulnt find any api for handling errorsYou can do it both ways but since we are talking about event handler now, then in 9.x you need to extend com.thortech.xl.client.events.tcBaseEvent class for creating a event handler. In tcBaseEvent class there are various flavors of handleError method. So use that as per my note earlier and you should be good.
HTH

How to create a custom Report in SAP CRM using the Bol Framework

Hi Guys
I have developed a report in SE38 which calls a custom Function Module within it and it works all good.
Now I want to take my Function Module as well as the external structures I created for this report and use them to make a View in SAP CRM which will allow the user to make selection and then when they click on a button another view has to be shown which should have the content of the report based on the selection.
I know how to create a view based on the standard object types but this time I want to use my custom function Module..
Kindly advice or refer me to a link that might be useful.
Regards
* Thato *

You want to create a View in SE11 calling FM that you created? Is it?

Search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.

search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
code. partner funtction - ZRG DATA :
DATA : lv_partner_fct type .
types: begin of ty_resp,
       partner    type but000-partner,
       name_last type but000-name_last,
       name_first type but000-name_first,
       mc_name1   type but000-mc_name1,
       mc_name2   type but000-mc_name2,
       end of ty_resp.
DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
       lw_resp_bp type ty_resp.
IF lv_attr_name = 'Rgroup'.
lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
                                   IMPORTING ev_result = lv_low ).
IF lv_low IS INITIAL.
SELECT partner
       name_last
       name_first
       mc_name1
      mc_name2
FROM but000 INTO table lv_resp_bp
WHERE mc_name2 = lv_low and bu_group = '0010'.
loop at lv_resp_bp into lw_resp_bp.
    lv_low = lw_resp_bp-mc_name2.
lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
                                            iv_sign = lv_sign
                                            iv_option = lv_option
                                            iv_low = lv_low
                                            iv_high = lv_high ).
ENDLOOP.
if lv_partner_fct = 'ZRG'.
lr_entity = lr_iterator->get_next( ).
CONTINUE.
ENDIF.
lv_attr_name = 'BU_PARTNER'.
ENDIF.

<b>You can acheive   this .... first by creating the search help exit    ... by creating the maintaince view   then   using it in the   Creation of the search help </b> ...
see the link for attaching the view   to the serach help .
<a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
reward points if it is usefull...
Girish

How can I create a new sales order template in SAP CRM 7.0

Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvan

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

How to transport SAP CRM Survey questionnaires

Similar Messages

Maybe you are looking for