How to trigger an idoc when 'For Approval' button is clicked in IMA11 trans

Hi Everyone,
I have requirement that an IDoc should be triggered when the button 'For Approval ' is clicked. I have created the required IDOc but I couldn't find the way to trigger it. Can anyone help in this regard.
Thanks in advance
sandhya

You can't get the "OK Pressed" directly, but you can check the error output. An error code 43 is generated when a user hits cancel in the dialog box.
If you're using a vi from the File I/O pallet (like "Write to SGL File"), they unfortunately don't have the error cluster wired as an output. They do have an output of the selected path. This is set to "Not A Path" if the user selects Cancel. Test the output path - if it is equal to the "Not A Path" constant, then the user hit cancel.
Tim

Similar Messages

How to trigger outbound IDOC when data changed in BP through Inbound IDOC.

Hi,
    In our system whenever we create a new Business Partner, these data is send across to SAP R/3 (as BDOC) and to Mainframe system (as outbound IDOC). Whenever we change any Business Partner record the data is send across to SAP R/3 (BDOC) and to Mainframe system (as outbound IDOC).
    This functionality is working fine.
    Currently we are getting a value for one standard field (Customer_Group3) of Business Partner as an inbound IDOC. The value of the inbound IDOC is reflecting in the field (Customer_Group3) in Business Partner Transaction. Once the inbound IDOC is received, the modified value is send across to SAP R/3 as BDOC. But the modified value is not send across to Mainframe system (outbound IDOC). The outbound IDOC is not getting triggered.
Kindly help

Is your mainframe system configured as Site in SMOEAC. If so are you using XIF Adapter.

How to trigger FIDCCP02 idoc for outbound vendor invoices?

Hi
1. How can i trigger the idoc FIDCCP02 for outbound processing? I am trying to use this idoc to send the vendor invoice data to another system.
2. How do i send existing data from sap to another system thru idocs?
pls give me the steps.
Regards
Sujai

Hi Sujai,
First you have to fill the your data into a table which is like the structure of EDIDD.Here you have to fill the all segmetns in the sequence which defined in the idoc type only other wise you will get error 26.
Then pass the control record data in the structure like EDIDC here you have to fill the sender,receiver,partner profile,idoc type message type like stuff.
Then pass these table and structure to the function module MASTER_IDOC_DISTRIBUTE.
Then idoc will created by above funciton module.
If you want pass data in xml format then you have to create xml port in we21 and pass this port name in the EDIDC structure.
Thanks,
radha.

Trigger an Idoc when a sale order is been opened in VA02 & saved

Hi Experts
     I have a requirement to trigger an Idoc when a sale order is been opened in VA02 transaction and saved.
Now that I have attained the same through Message Control Settings and Nace out put type settings with Multiple Issuing.
Here in the Idoc will be triggered when the user makes any changes in the order based on the NAST table entry.
Now my requirement is that the Idoc has to be processed even if there is no changes made to the document when the user opens the sale order and clicks save.
This is the process been carried out to re-process the Idoc.
Now that the Idoc is triggered using the path ---> menu - extras -output - header- edit & save.
Now that the user need to process the Idoc by just opening the order in VA02 and click save.
How can this be attained ? is there any configuration for it ?
Or is it possible to handle the same in any of the user exit ?
the problem is the user exit save gets triggered only when there is any change in the document else it throws a msg " No changes made"

Hi Niraj
   Thanks for your Response.
Now that the output control works fine when there is any change made to the document.
Now that i need to configure such a way that the output control triggers even if there is no change to the document and save   button is clicked.
Can U please elaborate how do i make settings in VOFM-> Output Control ?
Thanks
Sathish

BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?

Hi All.
I have this request.
BODS 3.1 : How to trigger an email alert for the jobs on BODS server ?
We have jobs scheduled on BODS running smoothly and absolutely fine.
But to check, i am logging into the admin console and check for the jobs status.
I would like to have an email to be received from BODS after each job is finished.
It could succuessful. Or it could fail.
Whatsoever, i wish to receive an email alert as soon as a job is finished.
Can anyone advise me as to whether this could be made possible.
And if yes, how this could be done.
Thanks for your help in advance.
In BOE CMC / for webi / schedule / we find an option to send email for a job success or a job failure.
Is there any option similar to that in BODS ?
Also would like to know :
how to use the smtp_to or mail_to functions ?
how to set up the smtp server for this ?
thanks
REgards
indu
Edited by: Indumathy Narayanan on May 31, 2011 3:47 PM

Hi.
Since am new to this BODS. I need some help.
I already have many jobs which are running absolutely fine.
And when a job runs, and finishes, am able to see the trace saying
e.g. :
Job_abc is completed successfully.
We got the smtp service activated for our test server.
and we hae a group email id.
I have put the details of the smtp server / ip address / and said apply restarted.
The i created a simple test script as below :
print (' Before email ' );
smtp_to('abc@company_name.com', 'Job ' || job_name() ||' on ' || host_name() || ' has FAILED',
' the job has failed', 0, 0);
print('After Email ');
It does send a email to as per smtp_to whatever email is specified.
But how to differentiate between a job success
And a job which has failed.
I wish to have a mail which says on the subject :
'Job ' || job_name() ||' on ' || host_name() || ' has completed successfully'
==> IF it is a success
OR
'Job ' || job_name() ||' on ' || host_name() || ' has failed'
==> if it has failed
How to make the system identify, whether
to send a success message or a error message whatever
Could anyone advise.
thanks
indu

How to Trigger an IDOC from SAP R/3 to two systems at a time

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.

Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas

How to Trigger an IDOC from SAP R/3 to two XI systems

Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.

Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you ..

How to use the Validate step for Approve step

Hi Experts,
I have modeled a workflow with the steps start,process, validate, approve, process and stop.
Process is set to owner and approve is set to some other user user1.
My requirement is as follows :
1) Approve the records by approver and then it should send it to the next step for further processing
1.1) if the approver did not approve the record it should send a error message until the record is approved. So it should not send it to the next step when record is not approved
I am using a field called item status for approving and disapproving the records. My validation is based on this field only... Validation working fine when i tested it manually.
But my issue is when am using this validate step in workflow design validation is getting triggered for all the users.as per my requirement only approver should get the error message.But in my scenario owner is getting the error message and approver is not getting any message.
How can i use the validate step only for particular step say approve in workflow.
Can anyone please help me out how should use validate step only for approve step...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 17, 2008 2:48 PM

Hi ,
I have set the validation property to "None".
My design is as follows :
start->process->validate->approve->stop.
Owner is assigned to process step and approver is assigned to approve step.
Now my problem is owner is also getting this error message along with the approver. AS per the design both process, approve users are getting the error message.
As per my requirement only approver should get this prompt but not the owner.
How can i restrict only for specifc user to get this message.
Can anybody please advice how can restrict the owner to not get this error message...
Thanks & Regards
Sireesha.
Edited by: sireesha esukapalli on Jun 24, 2008 2:18 PM

How to trigger email notification when users fail to reset your password in fim 2010 r2.

Hi,
how to trigger email notification when users fail to reset your password in fim 2010 r2
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2

Hi,
How to trigger email notification when users fail to give correct answers to reset your password in fim 2010 r2
Senario:I want put wrong answering to the Questions that i was during registration if i give wrong answers to the questions then a Email Notification should be trigger to Users.
Regards
Anil Kumar

Hi Sylvain,
I did all thing as you told me.First i created Criteria based Set after this we created a Workflow type Action and Actvities Type Notifcation Email template and finally i called this Workflow in MPR as Set Transition and call Set that i was created below.and
check Advance View of Set this gives
<Filter xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Dialect="http://schemas.microsoft.com/2006/11/XPathFilterDialect"
xmlns="/Request[(Creator">http://schemas.xmlsoap.org/ws/2004/09/enumeration">/Request[(Creator = 'b0b36673-d43b-4cfa-a7a2-aff14fd90522') and (RequestStatus = 'Denied or PostProcessingError')]</Filter>
But this is not working for me so please tell me where i am wrong.
Regards
Anil Kumar

How to trigger a workflow when data inside a table changes

Hi
How to trigger a workflow when data inside a table changes ??
We need to trigger a workflow when STAT2 field value in PA0000 table changes.
rgds
Chemmanz

Make use of Business Object BUS1065. In this business Object you have an attribute Status which you can use. There are a number of events that will get triggered when the status is changed.
Thanks
Arghadip

How can I set a value in a field before create when a New button is clicked

Hi,
I am using
JDeveloper 10.1.3.1.0.3984 and
JHeadstart 10.1.3.1 release 10.1.3.1.26
I have one group and there is a detail group under that group.
From main group to detail group there are 3 field relating those groups.
field1
field2
fieldSEQ (auto-generated by database trigger)
These 3 fields are PK.
In the detail group, there is a New button. So, when the New button is clicked, it tries to create the record with those 3 fields value as those are coming from main group. As a result it's giving the duplicate error as that record already exists in the table.
But I don't want to create the record with that SEQ as that will be created in the trigger.
How can I set the SEQ temporarily any no. (-1) before create when the New button is clicked?
Can anybody help?
Thanks
Syed Jabbar
University of Windsor
Windsor, ON, Canada

Hello Syad,
What I would suggest is setting the sequence number at the creation of the entity object (so in the create() method) by using the database sequence. This way it will always be unique.
So something like:
protected void create(AttributeList AttributeList) {
super.create(AttributeList);
SequenceImpl sequence =
new SequenceImpl("KCP_SEQ", getDBTransaction());
setFieldSeq( sequence.getSequenceNumber());
If this still does not solve it: please go to the ADF Forum since this problem is an ADF problem, not a JHeadstart problem.
Regards,
Evert-Jan de Bruin
JHeadstart Team.

Need to show popup when the Submit button is clicked for the second time ..

Hi guys,
I have a requirement where i need to show a popup or alert when the submit button is clicked twice . When it is clicked for the first time one method is been called and its process starts. When the user clicks the submit button for the second time they should be shown a popup stating "Submit button already been clicked, please clicked OK to continue".
Can anyone help with this please , its really urgent requirement ?
Thanks in advance

Hi,
I dont have any sample code to give you now. For quick reference, I can advice some psuedo steps to achieve your requirement. I dont have access to JDEV to test this. If any syntax errors then pls correct yourself.
1. Extend Controller since it is standard page ( Refer Anil Passi site for steps to extend seeded ontroller)
2. Write below logic in your Process Request method
super.processRequest(oaPageContext, oaWebBean);
pageContext.putSessionValue("status", "notInitiated");
3. Include below logic in your PFR method
if(pageContext.getSessionValue("status")!=null){
if("notInitiated".equals(pageContext.getSessionValue("status")))
super.processFormRequest(oapagecontext, oawebbean);
pageContext.putSessionValue("status", "initiated");
else
String message = "Display error message as required";
throw new OAException(message, OAException.ERROR);
You may need to import required packages ( Related to OAException).
Remeber, to sumbit the request, user need to refresh the page again so that "status" variable will be refreshed.
Hope it helps.
Thanks
venkat

How to switch from different views when a common button is clicked on using View states concept

Hi
i have made a single form for both Login Screen and Registration screen with two states :
1. BaseState which is the curret state of state of My application
2.registrationstate
I have a common button for changing from one view to another view .(Not related to any of the state)
At first the Login screen is loaded , and when the common button is clicked , i want to switch to Registration Screen .
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
    <![CDATA[
// Logic for common button needed .
    public function handleMe(event:MouseEvent):void
    ]]>
</mx:Script>
    <mx:states>
        <mx:State name="registrationstate">
            <mx:SetProperty target="{formitem1}" name="label" value="Email"/>
            <mx:SetProperty target="{button1}" name="label" value="Change state to Login"/>
        </mx:State>
    </mx:states>
    <mx:Form x="248" y="158">
        <mx:FormItem label="User Name" fontWeight="bold" id="formitem1">
            <mx:TextInput/>
        </mx:FormItem>
    </mx:Form>

    <mx:Button
        click="handleMe(event)"
        x="297" y="261" label="Change state to Registration" id="button1"/>
</mx:Application>

Originally I could not get that to work, but now I have it working:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute">
<mx:Script>
    <![CDATA[
      import mx.controls.Alert;
      public function handleMe(event:MouseEvent):void{
        trace(this.currentState);
        if(currentState=="" || currentState == null){
          mx.controls.Alert.show("base state");
          currentState = "registrationstate";
        }else if(currentState=="registrationstate"){
          mx.controls.Alert.show("registrationstate");
          currentState = "";
    ]]>
</mx:Script>
<mx:states>
    <mx:State name="registrationstate">
      <mx:SetProperty target="{formitem1}" name="label" value="Email"/>
      <mx:SetProperty target="{button1}" name="label" value="Change state to Login"/>
    </mx:State>
</mx:states>
<mx:Form x="248" y="158">
    <mx:FormItem label="User Name" fontWeight="bold" id="formitem1">
      <mx:TextInput/>
    </mx:FormItem>
</mx:Form>
<mx:Button click="handleMe(event)" x="297" y="261"
    label="Change state to Registration" id="button1"/>
</mx:Application>
If this post answers your question or helps, please mark it as such.
Greg Lafrance - Flex 2 and 3 ACE certified
www.ChikaraDev.com
Flex / AIR Development, Training, and Support Services

ADF/JSF page loads when any command button is clicked

Hello All,
I am lost in the ADF/JSF page flow (using Jdev 10.1.3). Following are the tags (in order) in my page;
(WHEN THIS PAGE LOADS, IT GOES TO THE DATABASE TO GET VALUES (for the drop down lists that will appear on the page); THIS SHOULD HAPPEN JUST ONCE AND AT THIS POINT)
<f:view>
<afh:body>
<afh:html>
<af:form>
<af:panelpage>
<f:facet name="contextSwitcher">
<af:panelHorizontal> has a af:commandLink </af:panelHorizontal>
</f:facet>
<f:facet name="messages">
<af:messages/>
</f:facet>
<af:panelform>
<h:panelGrid columns="2" cellspacing="14">
has 2 panelgroups (one group has *2 SelectOneChoice lists (that need to be populated by fetching data from database* and the other group has 2 CommandButtons - 'Go' and 'Cancel") (GO BUTTON SETS THE SHOWPANEL() TO TRUE)
(WHEN GO BUTTON IS CLICKED, THE PAGE GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD (action="#{muBean.doWork}" )THAT IS ASSOCIATED WITH GO BUTTON ACTION SHOULD BE CALLED)
</h:panelGrid>
<h:panelGrid columns="2" cellspacing="14" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 inputText fields
</h:panelGrid>
<af:table var="someTable" rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has a bunch of af:columns
</af:table>
<af:panelHorizontal rendered="#{myBean.showPanel}"> (THIS ONE IS RENDERED WHEN SHOWPANEL() METHOD IS TRUE)
has 3 af:commandButtons - submit, save, add row
(WHEN submit or save or add row BUTTON IS CLICKED, THE PAGE KIND OF LOADS AND GOES TO THE DATABASE (AS IT DID ON PAGE LOAD). *THIS SHOULD NOT BE HAPPENING*. ONLY THE METHOD THAT IS ASSOCIATED WITH submit/save/add row BUTTON ACTION SHOULD BE CALLED)
</af:panelHorizontal
</af:panelForm>
</af:panelPage>

<jsp:include page="/pages/includes/footer.jspx"/>
</af:form>
<f:verbatim>
<script type="text/javascript" src="../script/tree.js"></script>
</f:verbatim>
</afh:body>
</afh:html>
</f:view>
</jsp:root>
_*why is it that when the command buttons are clicked, the whole page is loaded? Only the methods associated with the action (action="#{newMapRequestItem.addARow}" ) should be called.*_
_*IS THERE A WAY TO AVOID THIS WITHOUT USING PARTIAL PAGE RENDERING ?*_
_*DOES MY TAG NESTING LOOK OK?*_
Edited by: user12054715 on Mar 24, 2010 12:00 PM

Can somebody please address this?
Thanks,

How to trigger an idoc when 'For Approval' button is clicked in IMA11 trans

Similar Messages

Maybe you are looking for