How to Trigger an IDOC from SAP R/3 to two systems at a time
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELVRY03 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once. We need to write a logic to route the same to two different systems
Can any one tell me how can we do that ?
Regards
Ram.
Hello Ram,
Do you have connectivity between your production & XIQ?
What does "connectivity" mean?
1. RFC destination is maintained.
2. Port defined for the RFC destination.
If no, create these. (Search in SDN for details).
If yes, proceed:
1. Define the logical system for XIQ.(BD54)
2. Define the same as your partner profile. (WE20). Add the message type SYNCH with the port for XIQ.(This is imp)
3. Create a distribution model view with sender as "your production" & receiver as XIQ.
3.1. Add the messages which you want to distribute.
3.2 Generate Partner profiles.
No coding is reqd. for this.
BR,
Suhas
Similar Messages
-
How to Trigger an IDOC from SAP R/3 to two XI systems
Hi experts,
Can any one please tell me How to Trigger an IDOC from SAP R/3 to two XI systems at a time.
My current production R/3 system sends a DELCERY01 IDOC to Production XI system ( Name : XIP) .
I would like to route the same IDOC from production R/3 system to my Quality XI System ( Name XIQ) .
Problem is production R/3 system triggers an IDOC once.
Regards
Ram.Hi Ravi,
Thank you very much for your answer.
As I am not completely aware of R/3 side,I am getting little problem in understanding your answer.
Could you please explain the same in some what beter way.. Thank you .. -
How to trigger crystal report from SAP ECC
Hi All,
I hope i m right forum to ask this question.
we want to do label printing from Crystal reports. data will be present in SAP ECC .
So I below issues
1 ) how to connect SAP ECC database with Crystal Reports.
2 ) how to trigger print output in Crystal reports from ECC , lets say I create a Delivery In ECC , the print output will be issued to Crystal report and I should get a print out Immediately ( for printing - printer will be connected to local system and SAP network printer ) .
I have worked with this type of scenario in smarforms , adobeforms. but not with Crystal Reports ...
Regards
Yashpal Gupta.Hi Yashpal,
First thing you need to do is install the Connector on both your work station where you run Crystal Reports as well as the SAP Server where the data is.
So I moved your post to the SAP Integration Kit forum.
Need to know what version of Crystal Reports you are using?
Search of browse here, lots of info on how to...
Thanks
Don -
How to trigger an Idoc from Sales order creation and change
We are trying to trigger Idoc from sales order creation and change we have done following setting mentioned below:
Follow the below steps:
1. Go to NACE transaction
2. Select V1 application and select OUTPUT TYPES
3. Select the required output type and double click on Processing routines.
4. Enter Medium as DISTRIBUTION ALE, Program as RSNASTED and Routine as ALE_PROCESSING.
5. Save it.
message type ORDERSP in the distribution model (BD64).
Follow the below steps to configure the condition records:
1. Go to NACE
2. Select V1 application and select CONDITION RECORDS
3. Select the requred output type and click on Condition records
4. Selection screen will be displayed.
5. Go for execution. In that screen enter the selection criteria. For eg Condition record is based on Sales document type. Then
Sales doc type = OR
Funt = SP
Partner = blank. It means there is no restriction on partner numbers.
Medium = A
date/time = 4
Lan = EN.
Note: partner is left blank means, the sales order of type OR can be send to all partners.
6. Save it.
We also done ALE configuration.
We are facing problem that from VA02 "No output has been selected for printing Message no. V1102"
Kindly suggest the solution.
Regards,
Sharad DixitHi ,
Please check the total error description and diagnosis as below :
InVa02 enter SO go to extras->output->Header->edit.You can find a table with all the triggered output types. Choose the output type BA00 with medium Distribution ALE and go for 'Processing log'. It will show you the error description.
Please paste the diagnosis .
Thanks and Regards,
P.Bharadwaj -
How to trigger payment Idoc from F110
Hi All,
I am working with a senario where in I need to trigger an payment proposal from F110 with reference of Document number(BKPF-BELNR ).
Stettings which I have done
Posting Date : 24.01.2005
Docs entered up to : 24.01.2005
Customer items due by : 24.01.2005
Company Code : 3000
Payment Method : C/CIT
Vendor : 3802/3803
In Free Selection
The Document Number : 190000....
I Have not selected any logtypes in Addtional Log
Printout/Data Medium
Programs : RFFOAVIS, RFFOEDI1
I have not selected any program for List
I was not able to trigger the Idoc with these setting can any one please send the configuration details in details.
It's very urgent
Thanks & Regards,
Sai SumaHi Suma,
Please provide the answer if you have found.
I need very urgent.
Thanks & Regards,
Manju -
How to Trigger PAYEXT IDoc from Payment Run?
How do I trigger an IDoc of message type PAYEXT / PEXR2002 when I execute a payment run T Code F110?
What are the config steps required?
Thanks,
Bhaskar GahndikotaHi Bhaskar,
I have same issue,it's not triggerd the IDoc of message type PAYEXT / PEXR2002 when I execute a payment run T Code F110.
If you don't mine can you share your document to my mail id : [email protected]
Thanks & Regards
Prathip -
How to trigger a refresh from SAP
I have setup a web dynpro to display information from a function module in SAP. The function module executes abap programs in the backend SAP system and returns a result to a table in SAP. The information in this table is read by the function model that is bound to the web dynpro. I would like to know whether it is possible to trigger a refresh of the information displayed by the web dynpro once the abap in SAP has finished running. How do I go about implementing this in Developer Studio?
Thanks
SebHi Seb,
the only solution is to use the TimedTriggerUI to get your browser doing a refresh. Even if you would have a thread running which polls yours backend, the server has no possibility to send this to your http client (browser).
With the timed trigger your browser refreshes (connects) in intervals to the java app server. This events can be used to poll changes.
Best regards,
Christian -
Transfer article master from SAP R/3 To External Systems(Futura) Using IDOC
Dear Experts
Please let me know how to Transfer article master from SAP R/3 To External Systems(Futura) or text file Using IDOCs.
thanksHello,
Since you want to transfer Article Master, it should be a Retail System. So you should use Message Type ARTMAS. For fullbuild, you can use transaction WDBM and for changes, you can use WDBU. For changes, you can enable change pointers for required fields using BD64.
Thanks,
Venu -
Sending IDOC from SAP ECC to SAP MII
Hello,
Issue while configuring.
I have configured the RFC Destination in the Netweaver message listener and when i check the connection in SM59 I got error as timeout during allocate of registered program and I have attached the screenshot of the error page.
I would request a reply asap.
Thanks,
PraveenHi Praveen,
First, I would suggest that you identify what version, and SP, of MII and ECC. Also the NW version and SP if applicable.
Second, use this custom Google search and terms MII, IDoc Listener, and perhaps SM59. There are many discussions on IDoc Listeners going back a number of years. Many of the issues with IDoc Listeners have not changed in most of that time, so look at the older ones as well. I presume that you found and are using my How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener (MII 12.1 to ECC 6.0) to set up your Listener? If not, you should review your configuration and setup procedure against it.
I have not looked at MII 14.0 or 15.0, but understand that the configuration of Listeners really has not changed since MII 12.1. So the document is still applicable.
Third, roughly 90% of the problems experienced with IDoc Listeners involve multiple uses of the self registering ProgID. Deleting it in one place, generally does not work. Use it in one place only. Create a new ProgID for each separate Listener (either type) on each separate MII instance for each ECC instance. Save yourself a lot of headaches. Never, ever reuse ProgIDs!!!
Fourth, most of the other issues involve a PI/XI system in the middle. Those are a bit more complicated since they rely on getting the connection configuration set up properly in PI. Since I am not that familiar with PI systems (most times it is not involved with the Listeners), I generally have to get other experts involved. Sometimes a CSS ticket is required.
Regards, Mike
SAP P&I Technology RIG -
How to create Inbound Idoc from XML file-Need help urgently
Hi,
can any one tell how to create inbound Idoc from XML file.
we have xml file in application server Ex. /usr/INT/SMS/PAYTEXT.xml' we want to generate inbound idoc from this file.we are successfully able to generate outbound XML file from outbound Idoc by using the XML port. But not able to generate idoc from XML file by using we19 or we16.
Please let me know the process to trigger inbound Idoc with out using XI and any other components.
Thanks in advance
Dora ReddyHi .. Did either of you get a result on this?
My question is the same really .. I am testing with WE19 and it seems SAP cannot accept an XML inbound file as standard.
I see lots of mention of using a Function Module.
Am I correct in saying therefore that ABAP development is required to create a program to run the FM and process the idoc?
Or is there something tht can be done with Standard SAP?
Thanks
Lee -
Error while pushing idocs from SAP to XI
Dear All,
For doing ALE configurations for pushing IDOC's from SAP to XI, I am following the following blog posted on SDN:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
I am able to create the model view distribution successfully but when I am clicking on EDIT --> MODEL VIEW --> DISTRIBUTE (which is one of the steps mentioned in the blog), I am getting an error tht
<b>Target system XIDEV Communication error occurred
User is locked. Please notify the person responsible</b>
please tell me what is the error ie which user is locked and how should i proceed now.
Waiting for your reply.
Warm regards,
N.Jainhi krishnamoorthy,
i hve created one RFC in my R/3 system which is pointing to Xi-DEV. So, in the RFC I have used my XI user id & password for loging and the RFC is wrking fine when I am testing tht. I have used my id "XISUPER" in that RFC and it is not locked in XI-DEV. I have not used user id "XI_APPLUSER" anywhere.
Please suggest.
Warm Regards,
N.Jain -
Post Idoc from SAP to Thirdparty using XI
Dear Friends,
My requirement is sending the Idoc from SAP to Thirdparty system,but Thirdparty system also receive the Idoc format only.
so IDoc to Idoc scenario but SAP to Thirdparty system it is possible or not.
please tell me how ?
Regards,
Shalini ShahYou can use SAP Business Connector(BC) to convert IDOC to IDOC-XML at the third party legacy system.
With Business Connector see the below links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
http://www.erpgenie.com/mysap/bus_connector.htm
WAS - Business Connector
business connector documentation
SAP Business Connector
Business connector
Will Business Connector 4.6 be affected by new Daylight savings changes
Business connector
More info on XI can be found at https://service.sap.com/xi
and webAS on http://help.sap.com/saphelp_nw04/helpdata/en/f3/e20f3adfd0a706e10000000a114084/frameset.htm
Check this also-
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/frameset.htm -
How to invoke business process from sap xi?
Hi...
Please tell "How to invoke business process from SAP UI's."Hi...
How to invoke business process from SAP UI's. (Eg: To trigger a process after creating an invoice) -
How to trigger sender rfc from r3 system
Hi experts,
can any body send documents about " how to trigger sender rfc from r3 system"
regards
sandeep.HI Sandeep,
To send RFC data on timely basis you can schedule the programs.
In Partner Profile use setting collect program. Use program RSEOUT00 to send data at particular time.
You can schedule the report RSEOUT00 according to your requirements. So it flushes all the idocs in the background as per your schedule this program.
Plese refer the below thread, it will help you.
Re: Triggering Idocs from sender side
Idoc triggering from a transaction
Cheers..
Vasu
<i>** Reward Points if found useful **</i> -
How to post inbound idoc in sap system?
Dear All,
How to post inbound Idoc in sap system?
Regards,
Amar
Edited by: amar kumar on Nov 23, 2009 2:53 PMHi Amar,
Use the FM IDOC_WRITE_AND_START_INBOUND to post an inbound IDoc. Just build the EDIDD and *EDIDC8 tables and enter a profile for a inbound message type from a partner. It returns a IDoc number. Don't forget to do commit work.
Regards
Abhii
Maybe you are looking for
-
Message coming up saying calendar can't find server
I keep getting this error message. It says the calendar might be pretending. What should I do?
-
Error msg while assigning sales area ( A ) customer to sales area ( B)
dear friends, I have created four account groups - SP ,SH, PY & BP respectively. And i have four sales areas - A, B, C , D, so i created 3 different customers in each sales area under sold to party account group. Actual problem is when i am trying to
-
My iPhone5S will no longer connect to my home wifi but others do.
My iPhone5S will no longer connect to my home wifi but others do. Mine will connect to other networks. I have rebooted the router and the phone, reset Network Settings, deleted the wifi network and reinstated it. Can anyone please help?
-
"Who ran me" - how to determine the name of the dbms_scheduler job that ran me
Hi Community I can see plenty of examples out on the interweb which shows how you can use dbms_utility.format_call_stack to find the hierarchy of procs, functions and packages that got me to a particular point in my code. For example, if proc (proced
-
Idoc to create a Licence in GTS
Dear experts, I have a situation where in I need to create Licence in GTS system based on the information from a 3rd party system. So, Is there any inbound idoc in GTS system to automatically create the licence (I'm using middle ware to convert th