How to trigger the event HANDLE_DATA_CHANGED manuallly?
Hi experts,
I have a requirement were i have a editable alv grid(container..). I have also used the event handle_data_changed.But the event gets triggered only if i press 'enter' after typing the data on the grid. But i need the event to be triggered when i press the save button which i have desinged in the gui status. Please suggest some ways and provide some sample code if possible.
Thanks in advance
regards,
Ashwin
you might have written code to handle SAVE ucomm.
data: g_check.
module status_0100 output
set pf-status 'ZMAINGUI'.
set titlebar 'ALVTITLE'.
case sy-ucomm.
when 'SAVE'.
call method g_alv_grid->check_changed_data
IMPORTING
e_valid = g_check.
if g_check = 'X'.
*here you can write the same code what you have written in
*HANDLE_DATA_CHANGED
endif.
endcase.
endmodule. "status_0100 OUTPUT
Similar Messages
-
How to trigger the event when leave current iView
Hi Expert,
We have this common senario: when leave current iView(eg, change the menu, close the window etc) we need to notify user whether they want to save current content or not, but I found wdDoExit(in views or coponent controller) can not be triggered
Is there any event we can use to reside these logic?
Thanks in advance.
Best Regards,
WilliamHow about trying to use the wdDoBeforeAction event? You can use a flag to keep track of whether or not there is unsaved data, and check it in the above-mentioned event.
Walter -
How to trigger a event when WBS gets changed in Cj02
Hello,
I have a requirement where I need to send create an idoc and send the idoc to external system when WBS is created or changed. Currently, I have the following setup:
- I have created a YBUS2054 as a subtype of BUS2054 using SWO1
- YBUS2054 has been delegated to BUS2054
- created an CHANGED event in the YBUS2054. This event is implemented and then released
- created a type linkage (object type=YBUS2054, event=CHANGED, receiver type null, and receiver function module = zz_create_wbs_idoc) using SWETYPV. This function is supposed to create an idoc when CHANGED event occurs. I just don't know how to trigger the event to occur.
- all the port, define idoc type, logical system, and etc are setup
- when I try to create an entry in "Event for Chagne Document" using SWEC with change doc object=PROJ, business object type = YBUS2054, with on change, I get "Key for change doc object PROJ and business object type YBUS2054 are incompatible".
I tried various configurations, and I was not successfully in creating an event on CHANGED
can you please advise what I am missing in getting the changed event to trigger?
Thank you in advance,
ShawnHi,
If the change doc doesnt exist, check if you can create an event using BSVW.
Also use the event log to see if there are other sap standard events happening.
I checked the package belonging to CJ02 to see if there is something useable, but didn't find anything: CN_PSP_OPR
If there are no sap standard ways to get an event, you'll have to find a badi/enhancement spot and include some coding to start the event using fm SAP_WAPI_CREATE_EVENT.
Kind regards, Rob Dielemans -
How to trigger an event in the program
Hi,
I have a program. The purpose of the program is to retrieve the data matching the selection criteria and downlod the same to a file.
In the selection screen, I have a parameter called 'EVENT'. Here, user enters some event name. Generally, they enter the 'Background job processing events'.
So, my requirement is... once the files are successfully downloaded, the program should trigger the 'EVENT' specified in the selection screen at run time.
Can someone help me in this regard. How to trigger an EVENT in the program. Is there any Function Module or Method available in SAP which triggers the EVENT at runtime.
And is there any table available in SAP which stores all the events available in SAP. Because, whenever the user enters an EVENT in the selection screen, we should check whether the event is valid or not. So, if there is any table available which has all the events then, it will be easy I guess. or is there any other way to validate the EVENT name.
Please help me. Thanks in advance,
Best Regards,
Paddu.Hello Paddu,
have a look at tables
- btcsev, btcsed (system events)
- btcuev, btcued (user events)
and use function BP_EVENT_RAISE.
kind regards
Walter Habich -
How to define custom event and how to trigger the defined event
hi,guys
hurry issue....................hope get help.
I am using oracle weblogic 10gr3 portal.and we choiced java portlet.as of now,we got some question about custom Event.hope you can give some idea....
thank you so much.
question detail:
1.for java portlet ,how to define custom event.
2.how to trigger this event.
3 about the data,may be sometime need to transit Biz data.
auctully,I just want to implements between two portlets communicate.
for example:
existing portletA,portletB.
portletA is a list,like:
A AA <button>
after I click this buttom,then portletB will be effect,it means they are interact with each other.
does anybody hit this issue before,if you solved pls share me .
thank you for you help....Hello,
Please note that everything below applies to JSR168 portlets ONLY- JSR286 portlets and other portlet types handle events a little differently.
From inside your JSR168 portlet you can send an event during processAction or when receiving another event by using the PortletBackingContext object, such as:
import javax.portlet.ActionResponse;
import javax.portlet.ActionRequest;
import javax.servlet.http.HttpServletRequest;
import com.bea.netuix.servlets.controls.portlet.backing.PortletBackingContext;
public void processAction(ActionRequest actionRequest, ActionResponse actionResponse)
HttpServletRequest httpRequest = (HttpServletRequest) actionRequest.getAttribute("javax.servlet.request");
PortletBackingContext portletBackingContext = PortletBackingContext.getPortletBackingContext(httpRequest);
portletBackingContext.fireCustomEvent("customEvent", "This is a custom event");
To receive an event, in your .portlet file you just need to put in a "handleCustomEvent" tag specifying which method to call when the event is received, such as:
<?xml version="1.0" encoding="UTF-8"?>
<portal:root xmlns:netuix="http://www.bea.com/servers/netuix/xsd/controls/netuix/1.0.0"
xmlns:portal="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.bea.com/servers/netuix/xsd/portal/support/1.0.0 portal-support-1_0_0.xsd">
<netuix:javaPortlet title="Listening Portlet" definitionLabel="yourPortletName">
<netuix:handleCustomEvent event="customEvent" eventLabel="customEvent" filterable="true" description="custom event handler">
<netuix:invokeJavaPortletMethod method="processCustomEvent"/>
</netuix:handleCustomEvent>
</netuix:javaPortlet>
</portal:root>
Then, in your receiving portlet the method "processCustomEvent" would receive the event, such as:
public void processCustomEvent(ActionRequest actionRequest, ActionResponse actionResponse, Event event)
The event payload can be any Serializable object you want, but for forward-compatibility with JSR286 it would be ideal if it had a valid JAXB binding.
Kevin -
How to trigger the "click" event using javascript in LC8?
I have 2 button in the form. I don't want the user to click the button1 directly (invisible now). but I want the user click the button2 and then do some checking. after checking is finisined, the script will continue to trigger the button1 "click" event. How to trigger the button1 "click" event through javascript in LC 8? Thanks.
button2.execevent("click");
-
How to trigger left_click_run event on ALV GRID
Hiiiiiiii........
Can any of u please tell me how to trigger left_click_run event on ALV GRID.
There is an event LEFT_CLICK_RUN and its a public accessed event. But the problem is , the corresponding attribute of this event "EVENT_LEFT_CLICK_RUN" which is needed to registered that event (We need to register our events through a method set_register_events using table of type cntl_simple_events...) is protect accessed. So I am unable to use that attribute...Could u please tell me is there any alternative way to register that event.......ANY POSSIBLE WAY?
Thanks in advance,
RamsI think you should use event selection_changed. Note that you shouldn't allow multiple selection for the tree at the same time, i.e. use: create object g_tree exporting \[...\] node_selection_mode = cl_gui_column_tree=>node_sel_mode_single.
For more information, see this thread: Urgently required : cl_gui_alv_tree single_click event... -
How to trigger an event by using
Hi all,
I have created a jbutton and an event for the jbutton, for example,
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt)Now, I would like to trigger the event by pressing a hot key, for example "F1", how can i make it? Can anyone help me? Thanks.
Ning.Hi,
I have read through the information that you provided and tried to integrate it into my coding, but I'm really not so clear about that and i don't know how to apply into my coding correctly......can anyone help me? Thanks.
I'm creating an application using the J2SE v 1.4.2_10 SDK with NetBeans 4.1 Bundle. By the way, below is a simple testing program that including component jLabel1, jButton1 and jButton2. Both of the button are hold an event each. I would like to create a hotkey for each button, "F1" key for jButtton1, "F2" key for jButton2. If I click on the "F1" key, the jLabel1 will displays the character "ABC", if I click on the "F2" key, the jLabel1 will display the character "123". Can anyone provide the code to me? Thanks.
* test.java
public class test extends javax.swing.JFrame {
/** Creates new form test */
public test() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
// <editor-fold defaultstate="collapsed" desc=" Generated Code ">
private void initComponents() {
jButton1 = new javax.swing.JButton();
jButton2 = new javax.swing.JButton();
jLabel1 = new javax.swing.JLabel();
getContentPane().setLayout(null);
setDefaultCloseOperation(javax.swing.WindowConstants.EXIT_ON_CLOSE);
jButton1.setText("ABC");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
getContentPane().add(jButton1);
jButton1.setBounds(90, 70, 90, 23);
jButton2.setText("123");
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton2ActionPerformed(evt);
getContentPane().add(jButton2);
jButton2.setBounds(191, 70, 80, 23);
jLabel1.setBorder(new javax.swing.border.BevelBorder(javax.swing.border.BevelBorder.LOWERED));
getContentPane().add(jLabel1);
jLabel1.setBounds(110, 134, 150, 20);
setBounds(20, 20, 400, 300);
// </editor-fold>
private void jButton2ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
jLabel1.setText("123");
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
jLabel1.setText("ABC");
* @param args the command line arguments
public static void main(String args[]) {
java.awt.EventQueue.invokeLater(new Runnable() {
public void run() {
new test().setVisible(true);
// Variables declaration - do not modify
private javax.swing.JButton jButton1;
private javax.swing.JButton jButton2;
private javax.swing.JLabel jLabel1;
// End of variables declaration
}Ning. -
How to trigger the Process Chains in BI from ECC
HI Friends,
Can let me know How to trigger the Process Chains in BI from ECC. Please let me know.........Hi,
1) Define a Custom ABAP Program (eg : Z_EVENT_RAISE)..........call the FM : BP_EVENT_RAISE or RSSM_EVENT_RAISE..........and trigger an event towards BW .........specify BW as RFC destination...........
2) Create a R/3 Job in SM36>> use the Program Z_EVENT_RAISE ......
3) In BW schedule the PC..........and in the Start variant use this Event..........
http://sapbiwtutorials.blogspot.com/2009/03/how-to-trigger-process-chains-in-bw.html
It can be help full
Regards,
Edited by: subba2010 on Aug 19, 2010 6:51 AM -
How to cancel the event in Item Adding without going to the SharePoint Error Page?
Prevent duplicate item in a SharePoint List
The following Event Handler code will prevent users from creating duplicate value in "Title" field.
ItemAdding Event Handler
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
if (properties.ListTitle.Equals("My List"))
try
using(SPSite thisSite = new SPSite(properties.WebUrl))
SPWeb thisWeb = thisSite.OpenWeb();
SPList list = thisWeb.Lists[properties.ListId];
SPQuery query = new SPQuery();
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
SPListItemCollection listItem = list.GetItems(query);
if (listItem.Count > 0)
properties.Cancel = true;
properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
catch (Exception ex)
PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
Feature.xml
<?xml version="1.0" encoding="utf-8"?>
<Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
Title="Prevents Duplicate Item"
Description="Prevents duplicate Name in the "My List" List"
Version="12.0.0.0"
Hidden="FALSE"
Scope="Web"
DefaultResourceFile="core"
xmlns="http://schemas.microsoft.com/sharepoint/">
<ElementManifests>
<ElementManifest Location="elements.xml"/>
</ElementManifests>
</Feature>
Element.xml
<?xml version="1.0" encoding="utf-8" ?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListTemplateId="100">
<Receiver>
<Name>AddingEventHandler</Name>
<Type>ItemAdding</Type>
<SequenceNumber>10000</SequenceNumber>
<Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
<Class>AAA.BBB.PreventDuplicateItem</Class>
<Data></Data>
<Filter></Filter>
</Receiver>
</Receivers>
</Elements>
Below link explains adding the list events.
http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
Reference link:
http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.Recommended way for binding the list event handler to the list instance is through feature receivers.
You need to create a feature file like the below sample
<?xmlversion="1.0"encoding="utf-8"?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/"
Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
Title="Installs MyFeatureReceiver"
Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
ReceiverClass="ClassLibrary1.MyFeatureReceiver"
ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391">
</Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
using Microsoft.SharePoint;
namespace ClassLibrary1
public class MyFeatureReceiver: SPFeatureReceiver
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPSite siteCollection = properties.Feature.Parent as SPSite;
SPWeb site = siteCollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
SPEventReceiverDefinition rd = list.EventReceivers.Add();
rd.Name = "My Event Receiver";
rd.Class = "ClassLibrary1.MyListEventReceiver1";
rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391";
rd.Data = "My Event Receiver data";
rd.Type = SPEventReceiverType.FieldAdding;
rd.Update();
public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
SPSite sitecollection = properties.Feature.Parent as SPSite;
SPWeb site = sitecollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
foreach (SPEventReceiverDefinition rd in list.EventReceivers)
if (rd.Name == "My Event Receiver")
rd.Delete();
public override void FeatureInstalled(SPFeatureReceiverProperties properties)
public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
}Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights. -
Automatically trigger the event to load data from Planning cube to Standard Cube
Hello,
We have a below set up in our system..
1. A Planning BEx query using which user makes certain entries and writes back data to the planning cube.
2. An actual reporting cube which gets data from the planning cube above.
Now, what we want to do is to automate the data load from Planning cube to Reporting cube.
This involves 2 things..
1. Change the setting " Change real time load behaviour " of the planing cube to Planning.
2. Trigger the DTP which loads data from Planning cube to reporting cube.
We want to automate the above two steps...
I have tried few things to achieve the same..
1. Created an event in SM64,
2. In the Planning cube "Manage" Screen, clicked on "Subsequent Processing" and provided the event details. ( Not sure if its the correct place to provide the event detail ).
3. Wrote a ABAP program which changes the setting of the planning cube ( " Change real time load behaviour " to Loading )
4. Created a process chain, where we have used the event as a start variant, used the ABAP program as a next step, DTP run as the last step..
This i hoped, would trigger the event as soon as a new request comes and sits in planning cube, which in turn would trigger the process chain which would load the data from Planning cube to reporting cube..
This is not working. I dont think the event is triggering, and even if does i am not sure whether it will start the process chain automatically. Any ideas please ?hi,
try to do the transformation directly in the input cube by using CR of type exit, more details :
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/43/1c3d0f31b70701e10000000a422035/content.htm
hope it helps. -
How to create the event in the report for jobs scheduling.
Hi Experts,
i have a requirement like as follows:
The following triggers for Batch Jobs in the SCM system will be created.i.
Background Processing Event = u201CAPO Background Processing Eventu201D. After sending the Event, write a Log Report line u201CEvent u201CAPO Background Processing Eventu201D sentu201D.
Could you please suggest me how we create the Event or which transaction ?
Please give me a steps for creating events so that based on these events we use
CALL METHOD cl_batch_event=>raise
EXPORTING
i_eventid = p_bpeve
i_server = p_server
i_ignore_incorrect_server = p_ignore
EXCEPTIONS
excpt_raise_failed = 1
excpt_server_accepts_no_events = 2
excpt_raise_forbidden = 3
excpt_unknown_event = 4
excpt_no_authority = 5
OTHERS = 6.
Right now i received message "APO Background Processing Event" is doesn't exists.
Thanks in Advance.
Puneet.Hi Puneet,
Goto transaction SM62 and in there to BckProcEvents tab. There you can create the events.
You just need to specify the name and Description of an event.
Hope this serves your purpose.
Thanks -
How to avoid the event has been repeated many times in the background
Application, the main screen is divided into two containers:left and right container,
The right side of the container is divided into two containers:top and bottom container,
There is a button in the left container.
Click the button, the container at lower right will using ModuleManager load Module, The following container load of the right of the screen has been monitoring the container above the action.
Problem:
When you click the button repeatedly to load the container in the lower right, it will create multiple instances, and can not be freed immediately. When the above container do an action or event, there are multiple instances of monitoring exist.
The background will be repeat the action or event many times.
How to avoid the event has been repeated many times in the background?
ThanksFlex harUI
multiple instances of a mxml, maybe ? -
How to capture the event in ALV grid display?
Hi experts,
How to capture the event in an ALV grid display which is editable. I have to capture the TAB key or ENTER key.
regards,
Arul Jothi.Hi Arul,
Take a look at sample program BCALV_EDIT_03. (Find string "register ENTER" in the program to see how to register)
Basically you have to Register edit events using method call REGISTER_EDIT_EVENT and then write a handler method for event DATA_CHANGED..
If you are using a REUSE..GRID fm then first get the grid reference using function module GET_GLOBALS_FROM_SLVC_FULLSCR and then repeat the above procedure..
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni -
How to use the eventing and databag with a WAS 6.20 ?
How to use the eventing and databag with a WAS 6.20 ?
Is what there is a good guide for these services?
Thank'sIn the raise event you can pass the value
like below.
<SCRIPT>
function raiseEvt(value1){
if(window.document.domain == window.location.hostname){
if ( document.domain.indexOf(".") > 0 ) document.domain = document.domain.substr(document.domain.indexOf(".")+1);
EPCMPROXY.raiseEvent( "urn:com.sap:BWEvents","BWiViewevent", value1, null );
// alert('tree domain'+document.domain);
</SCRIPT>
and in the
subscribe event you can get the values like below.
<script language="javascript">
if(window.document.domain == window.location.hostname){
document.domain = document.domain.substring(document.domain.indexOf('.')+1);
EPCMPROXY.subscribeEvent("urn:com.sap:BWEvents","BWiViewevent", window, "myreceiveEvent");
function myreceiveEvent( eventObj ) {
document.forms[0].gp_hidden.value = eventObj.dataObject;
</script>
Also look at the following link for a complete documentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/Enterprise%20Portal%20Client.pdf
Regards
Raja
Maybe you are looking for
-
Help updating ATI graphics driver in bootcamp Windows 8.1 on iMac (Retina 5K, 27-inch) with 4 GHz Intel core i7, 16 GB 1600 MHz DDR3 and AMD Radeon R9 M295x 4096MB
-
Not able to post a parked invoice
Dear Experts , I have a parked invoice in which the posting date is in the closed MM period . Now i want to post the invoice , where in i m changig the posting date to the current date & trying to post , but , the system gives the following errror.
-
Captivate 4 not detecting audio input from USB Microphone
I'm using a Logitech USB microphone in Captivate 4. When I try to calibrate it, Captivate 4 is not detecting any sound. It is set up properly. In the "audio settings" menu, this microphone is listed in the drop down list. I have selected it as th
-
How to run weblogic managed server as windows servcie
Hello Friends, I want step-by-step guide to run managed server and application through windows service. I am able to create admin server as windows service. I tried lot for managed server but no luck. please help me to resolve it.
-
Help needed with wsdl2java tool
I am creating web service using axis2 , with top down approach. Initially thought of using the SOAP based webservices and created the wsdl like below. <wsdl:message name="CreateObjInput"> <wsdl:part name="CreateObjRequest" element="tns:CreateObjectRe