How to truncate user INBOX in Messaging Server 6.0

We are using JES2004Q2 messaging server 6.0
User has many messages in inbox (about 5000).
He want's, that mail administrator truncates all messages from inbox. User don't wan't to use pop or imap to delete messages one by one.
How mail administrator can delete all messages from user inbox?
Maybe it's posible to use 'mboxutil'?
How to find, where user mailbox is on the disk?
Can mail administrator delete messages directly from disk and run 'reconstruct -r', or it can be dangerous to all mail system?
Gediminas

The best way to accomplish this task should be to use
mboxutilIt's not advisable to manually delete messages from the message store, instead use mboxutil -d <PATTERN>where <PATTERN> is something like:
user/$USERNAME/<DIRECTORY>Marco

Similar Messages

  • How to find port number of message server

    Hi All,
       Is anyone there who could tell me how to find out port number of message server (Message Port)?  I am defining new system in my SLD so I need port number of message server of the system that I am connecting to. Thanks in advance.
       Best regards

    Hi,
    Go to the index page of the url,
    type http://hostname:http port in Internet browser.
    for ex : if installation is done on system with IP 172.16.28.90
    and your http port is 50000(depends on Central instance number,JCxx)
    then type http://172.16.28.90:50000.
    1.then go to system information tab in index page.
    for the credentials asked,type,
    user:administrator
    password:master password given during installation.
    then system information page opens,in the left corner top,you can find message server port.
    reward points if helpful.........

  • How to populate User defined Error message

    Hi
    i have a requirement as follows,
    we have 2 types users(patient and doctor) some fields are mandatory for doctor and some of them for patient creation.
    when they miss some fields while creating doctor it has to throw error message saying " these fields arer mandatory for doctor " same will follow for patient.
    so can any body please tell me how to use the UDF error messages. (no external code).
    Thank you.

    IF b1 = 'Business One'.
      ASK question [here|SAP Business One SDK;.
    ENDIF.

  • How to see Dispatcher,  gateway and Message server port numbers?

    Hi All,
    Can any body tell me how to know the port numbers of dispatcher, gateway & message server in a particular sap application server.
    Thanks & Regards
    Srinivas K

    Hi,
    This is very work around way...
    SM51-Choose theserver-there one icon (Magnifying glass) choose detaiols -
    There you will get dispatchet port.
    SMGW -
    dispaly file(icon) -
    in that you can find the port on which gate way is working.
    SMMS-goto-parametere--display...you can find the port for MS.
    SMMS -goto-display details (will give more info) you can find diff ports ...
    Apart from these all these services when they start they write log in work dir there we can find which port they are using while starting ..
    We can find them in the individual monitoring t-codes like SMMS,SMGW,SM51 etc..or from AL11 go to work dir and look at dev_disp,dev_ms,dev_rd.
    This is all very work around...
    The best will be services file at os level.
    Thanks.

  • How to configure USER CAL on SQL server 2008

    how to configure or Add User CAL on SQL server 2008?
    pls let me know the process

    Hello,
    There is no CAL management in SQL Server, you have the licenses only "on paper".
    Olaf Helper
    [ Blog] [ Xing] [ MVP]

  • How to unlock user account in Windows Server 2003

    Hi,
    I want to unlock a user account in Windows Server 2003.
    I have read a great post at http://forums.sun.com/thread.jspa?threadID=716240&start=0&tstart=0
    But I can not get it to work. According to the post the only thing you need to do is:
    "+to unlock an account, just set the value of the attribute lockoutTime to zero+".
    When I set lockoutTime to zero nothing happens. The user can still not logon.
    When I read the lockoutTime attribute for an account that is locked it is empty or zero if I have tried to unlock it earlier.
    So it doesn´t seem to change when the account is locked.
    Thanks!

    Hi,
    Windows Server 2012 has come with the concept of Group Managed Service Account (gMSA).  
    Following are the benefits of gMSA,
    - A single gMSA can be used on multiple hosts.
    - A gMSA can be used for scheduled tasks.
    - A gMSA can be used for IIS Application Pools, SQL 2012 etc.
    Checkout the below link regarding complete information on gMSA (creation and usage),
    http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
    Checkout the below thread on similar discussion,
    http://social.technet.microsoft.com/Forums/en-US/5bc96d1b-0cec-4d0c-a99d-7f34509c0714/how-to-use-correctly-managed-service-account-in-windows-server-2012-?forum=winserverDS
    Regards
    Gopi
    JiJi Technologies

  • User Access for Messaging Server and Calendar Server

    This is the first time i have setup JES. What i did was install Messaging, Calendar, Directory and Administration server. I did a configure after install option and followed the post install instructions for all of those servers.
    I then started the administration console and added a user via the crete user option under "users and groups". Next i tried to logon as the user i just created via webmail and pop (exchange) and get an error message stating that the user does not exist. I did a search on the user via that admin server console and i did find the user and the "mail account" option was selected. I also verified the password was correct.
    My main question is what am i doing wrong?
    My goal is to create a email and calndar server using JES. I also want webmail.
    Do i need to configure Identity Manager to create users for mail / calendar? Or do i create the users using the directory server / administration console?
    Also i didnt setup delegated administrator. I didnt think i needed it becasue i will configure all of this using on administrator. If i dont need multiple administrators do i need delegated admin.
    Here is some background information.
    Sun W2100Z
    4GB RAM
    Solaris 10 01/06 x86
    JES 2005 Q4
    Thanks for any assistance.

    You can not use the Administration console for creating Messaging users. Look-up "provisioning users" in the Messaging admin guide. If you're using schema 1, use Delegated Administrator. If you're using schema 2, use commadmin.
    HTH,
    Roger S.

  • How can i find SDM port , Message server port, Message server name?

    Hi All,
       I am tring to deploy a ear file from NWDS.
    I am trying to congigure through
      Windows>Preferences>SAP J2EE engine -- Remote.
    I have these questions.
    1. How can i find Message server Host?
    2. How can i find Message server Port?
    3. How can i find SDM port?
    4. What is the difference betweent the Message server port and SDM port? Both are same or can be different?
    5. What are the ways to deploy a ear file on remote J2EE engine ?
    6.Can I run SDM from a remote mechine and connect to the server?
    7. When i am trying to deploy a ear file i am getting
      "Cannot determine sdm host (is empty)" what is the possible reason.
    (Here i used information from /usr/sap/GXI/DVEBMGS00/j2ee/cluster/instance.properties for server host and port number)
    Thank you
    Ganges Leaves

    Hi Ganges~
    Please check this link~
    Deployment Problem
    Could not start SDM Server
    SDM setting the target system for j2ee engine
    "No route to host" - SDM
    SDM Error
    Can not deploy. sdm host is empty
    Hope this helps,
    regards,
    moorthy

  • How to add user to a terminal server list ?

    Hi , is there a way out to login users to terminal server remotely without GUI(rdp) from some commandline?
    background:
    i am trying to remote login user after machine restart in order to start a automation test run, so in order for the automation testrun to work properly i need to open a user session on the remote machine. after restart only two entries are found (when qwinsta
    is queried)
    SESSIONNAME USERNAME    ID STATE TYPE DEVICE
    console             administrator 0  active wdcon
    rdp-tcp                                 65536 listen rdpwd
    so i can't use tscon to connect to a user session as not user session exists in the first place?

    Hi,
    Thank you for posting in Windows Server Forum.
    As per your comment, you can login users remotely to terminal server with “mstsc” command line as per below command.
    mstsc [<connection file>] [/v:<server[:port]>] [/admin] [/f[ullscreen]] [/w:<width>] [/h:<height>] [/public] | [/span] [/edit "connection file"] [/migrate] [/?]
    For more information, refer beneath article.
    Use command line parameters with Remote Desktop Connection
    http://windows.microsoft.com/en-in/windows/command-line-parameters-remote-desktop-connection#1TC=windows-7
    Hope it helps!
    Thanks,
    Dharmesh

  • With Mountain Lion Server, can users access the Messages Server from outside your network?

    I would like to setup a new messaging service between my employees because we have issues with most online services. I'm thinking of getting a Mac Mini Server, so I can run Messages Server, but I have an employee outside my network. Can they login to the server remotely to use the Messages Server?
    Thanks

    If you're talking about setting up and using the Jabber messaging service provided by OS X server then yes, it's really easy to set up and use in and out of the office. The only trick it is, and also most other services, is a correct DNS setup so you're able to connect and use the server from the "outside".
    I use this myself (via Lion server rather than Moutain Lion server) from behind a dynamic IP addressed ADSL line and have no problems whatsoever.

  • How to validate users with Novell Directory Server

    Hi all, with iAS 6.0 SP3, how i can validate users stored in Novell
    Directory Sever?
    Thanks

    Hi
    I believe iAS is designed to work with iDS which is bundled along
    with the SP3 download. Also the directory server which is working with
    iAS must be Nortel LDAP Schema compatible and I'm not sure if NDS(Novell
    Directory Server) is compatible. What I'm trying to understand is if you
    have already registered iAS with NDS and you are having trouble in
    accessing the users or if you are having trouble in the installation.
    Raj
    Josep Maria Camps Riba wrote:
    Hi all, with iAS 6.0 SP3, how i can validate users stored in Novell
    Directory Sever?
    Thanks

  • How to reset users and groups in Server.app?

    Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
    In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
    I tried reset the server.app by following
    howto reinstall/reinitialize os x server
    http://support.apple.com/kb/HT200271?viewlocale=en_US
    These users and groups still showing there.
    Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?

    In theory, that should restore the users.  You can do some surgery if you are really brave.  But the reinstall generally should be enough. 
    These accounts are in the DSLocal data store.  Basically, this is very similar to the any OS X machine.  Apple keeps a default copy of the Local Database here:
    /System/Library/DirectoryServices/DefaultLocalDB/Default
    Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location.  I would not go this far unless the reinstall was unsuccessful. 
    To check, you can run this command:
    dscl . list /Users
    That will list all the Users in the local DB.   To get a count, pipe to wc
    dscl . list /Users | wc -l
    On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l)  But this is a system will man SACL groups so I likely have more than the default.
    Hope this continues to help.  Probably more info that you want. 
    Reid
    Apple Consultants Network
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
    Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

  • How can I get help with message "server does not support RFC 5746, see CVE-2009-3555" from error console. Have recently update Firefox and my Virgin Mobile internet connection doesn't work.

    CVE-2009-3555

    The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.
    Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
    * http://wiki.mozilla.org/Security:Renegotiation
    * http://kb.mozillazine.org/Error_loading_websites

  • How do I set the mailhost attribute in Messaging Server 3.5?

    <B>Intent of the hostname aliases feature: </B><BR>
    In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
    instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
    want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
    the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
    you want to be able to move a group of users quickly from one Messaging Server to another.
    <P>
    <B>How to use hostname aliases and how to set mailhost and MessageHostName settings: </B><BR>
    Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
    have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
    MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
    /etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
    server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
    installed.)
    <P>
    With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
    colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
    colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
    (MessageHostName), and if they match, the server considers the account to be local. <P>
    For example: <BR>
    MessageHostName=red.company.com,green.company.com,blue.company.com
    <BR>where original-host-name is the machine's real name. This entry must come first as the server uses the first
    entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
    wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.
    <P>
    In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
    blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
    DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
    red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
    not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
    in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
    be considered local to this machine.
    <P>
    Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
    MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
    16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
    migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
    attribute is recommended.
    <P>
    In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
    on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
    server, i.e. host.company.com
    <P>
    </A>A note about DNS
    Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
    A 128.101.101.101
    CNAME
    <P>
    Additional MX records are not required to use hostname aliases.
    <P>
    If you aren't sure about how to configure your DNS records, consult the book <I>DNS and Bind </I> by Paul Albitz and
    Cricket Liu.

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    See "Firefox connection settings":
    *[[Firefox cannot load websites but other programs can]]

  • How to disable one email account in iPlanet Messaging Server 4.5

    Hi,
    Any one can tell me how to disable a single user in iPlanet Messaging Server 4.5.
    Thanks
    Abid

    I wonder what product you're really talking about.
    There was never a product called, "Netscape Messaging Server 4.5". There was 4.1 and 4.15, but the next product was 5.0.
    These are all long discontinued, and nobody should be using them anymore.
    Assuming it's 4.1, check your ldap record for "inetuserstatus" and set it to "disabled", or even "deleted"

Maybe you are looking for