How to turn on internal SOAP engine to do validation and infoset augmentation

Hi,
How can I turn on the internal SOAP engine to do validation and infoset augmentation
so that
when I intercept the Body part of the SOAP message in my soap handler the XML
document
is ready for transformation? Thanks
Michael

Hi Michael,
Currently, no schema validation is performed when processing the SOAP or
WSDL. Primarily because of the negative impact of validation on
performance and also due to the lack of a very high quality (and fast)
schema validation. If there is an error in the XML during the processing
of a SOAP request, there will be a runtime error in either the
processing of the SOAP envelope or in the serialization of application
data between XML and Java.
There is a CR (CR082116) requesting an support optional validation XML
data sent to/from a webservice.
HTHs, Bruce
Michael Wong wrote:
>
Hi,
How can I turn on the internal SOAP engine to do validation and infoset augmentation
so that
when I intercept the Body part of the SOAP message in my soap handler the XML
document
is ready for transformation? Thanks
Michael

Similar Messages

How can i type international alphabet characters into keywords, title, and captions in Lightroom 4?

How can i type international alphabet characters into keywords, titles, and Captions in Lightroom 4? Usual Microsoft key shortcuts not working.

I haven't found a way to do that directly, but there is a workaround. It' s a bit cumbersome, so it's only good for the occasional character.
In MS Word or any other text editor create a file that contains all the international characters you need.
When you need to insert one of these characters into Lr (captions, title, keywords) copy the character from your text document and paste it into Lr where needed.
On Windows Ctrl + C / V works fine.

How can I fix my search engine? Google, Yahoo and Bing doesn't work.

How can I fix my search engine? Google, Yahoo and Bing doesn't work. I try to change them and they doesn't work. Its there a way to fix this problem?

Power off the router. Unplug it from the wall. Wait for few minutes.
Power off the router. Wait a while.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

How to turn on an iphone 4s without power button and also got water damage

how to turn on an iphone 4s without power button and also got water damage?

Actually the rice is not very effective, you really want to use a desiccant. There are products out there that work really well, the silica gel is a much better alternative to rice. See our blog post about what to do next time this happens:
The Truth About iPhone Water Damage
http://iheartrepair.blogspot.com/2013/07/the-truth-about-water-damage.html
I may receive some form of compensation, financial or otherwise, from my recommendation or link
<Edited by Host>

How To Turn On internal device?

My friend use my MacBook Pro.
But After he use, my iChat camera an Bluethoot off
how to turn On again?

Bluetooth - System Preferences > Bluetooth > Settings tab, click "Turn Bluetooth On".
The iSight should turn on automatically when you launch Photo Booth, for example.

HT4759 How to turn iCloud on & says check email & no mail and says go to settings, but for what?

How to turn iCloud on? Says check email-no mail then says go to settings- for what?

In order to use your Apple ID to create an iCloud account, the primary email address associated with the ID must first be verified. To do this, Apple will send a verification email to your account and you must respond to the email by clicking the Verify Now link. Make sure you are check the spam/junk folder as well as the inbox. If it isn't there, go to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right click Resend under your Primary Email Address to resend the verification email.

How to reestablish osx internal time machine. deleated as option and now only have external time machine option(seagate dashboard)

How to reestablish osx internal time machine. Deleted and now only have external time machine from Seagate dashboard. I have Imac 27 inch desk top 10.9.5 system.Thanks

Are you talking about local snapshots…
About Time Machine local snapshots - Apple Support
They can be enabled & disabled…
http://osxdaily.com/2011/09/28/disable-time-machine-local-backups-in-mac-os-x-li on/
If you deleted files for Time Machine on the internal disk then unexpected things may happen, reboot & cross your fingers in hope that they get recreated

How to turn OFF Reports Background Engine?

I know how to programatically invoke the RBE [win_api_shell.winexec('c:\orant6.0\bin\rwrbe60',WIN_API.SW_SHOWMINIMIZED);]
But the RBE stays out there after the report runs. Does anyone know a way to TERMINATE it programmatically?
Same question for the Oracle Graphics Background Engine.

Add this parameter:
ADD_PARAMETER ( pl_id, 'ORACLE_SHUTDOWN',
TEXT_PARAMETER, 'YES' );
null

Does anyone know how to turn the internal speaker on?

Hi I purchased an iPod Nano 5th gen. some time ago, at first the internal speaker worked but then it only played for about the first 10-15 seconds of the song. Now there's no sound at all, I can only listen to music with headphones. Is there something i can do to fix this or do I have to bring it in to get repaired? Thanks!

The options are up to you. Either take the iPod Nano to an Apple store or an AASP. Whichever is more convenient for you. Or if you want to do your own repairs (which will void your warranty) - iPod Nano (5th Generation) Repair Tutorials

How to turn off sharing of network settings between Mac and iPhone?

There are a number of wireless networks available around where I work. Whenever my Mac connects to one, so does my iPhone. When I tell my iPhone to forget the network, my Mac does as well. How can I turn off this behavior?

It's probably being caused by using iCloud keychain, which syncs passwords for wifi networks between your devices/Macs. You would have to stop using this feature to prevent stored and removed wifi network passwords from syncing between them.

How do I display line numbers? I am using the International Digital Publishing Forum EPUB Validator and the error messages refer to line numbers. Thanks, Earl

The validator gives me error messages messages that refer to line numbers and positions - very unhelpful. I need to be able to display the line numbers in the reader to find the places where the errors are. Can anybody point me in the right direction? MUch appreciated. Earl

Adobe Reader can't display epub files. Adobe Reader can't display line numbers.

How to import the internal table into subroutine as parameter

how to import the internal table into subroutine as parameter, and its structure can be recognized inside the subroutine

Hi Yong,
try this:
parameters: p_tabnm like dd03l-tabname.
field-symbols: <fs_tabname> type standard table.
data: itab_ref type ref to data.
create data itab_ref type standard table of (p_tabnm)
                     with default key.
assign itab_ref->* to <fs_tabname>.
select * from (p_tabnm) into table <fs_tabname>.
perform subroutine tables <fs_tabname>
                   using p_tabnm.
*&      Form subroutine
      text
     -->P_<FS_TABNAME> text
     -->P_P_TABNM text
form subroutine tables   p_tabname type standard table
                 using    p_tabnm.
Here p_tabname already has the structure of the table you gave as input
parameter
endform.                    " subroutine

My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

My URL/address bar is missing after the Delicious update.
My search engine drop down menu is missing after the Delicious update.
I can't figure out how to turn them back on, please advise, thanks.

Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How to turn off hard disk identification in LR 3.3?

Hi!
I have a problem with LR 3.3 on my Windows XP. I have a lot of harddisk (1TB, 2TB SATA2, made by Samsung) in my XP system with my RAW photos, all encrypted by Truecrypt. When I need to import my existings photos from that secured harddisk (Truecrypt is the best tool i have tested), LR 3.3 is blocking option Move and Add in Import dialog.
I must duplicate my photos by Copy options only - like from memory card.
LR 3.3 is thinking, that my encrypted harddisks are my memory cards, and is disable Add and Move option.
How to turn that bad identyfication off?
And in the end, every time when I want to import photos - LR 3.3 is searching all my TB harddisks (more then 30 minutes) to create and show my thumbs in folders - and I can not stop this searching. How to turn it off too?
Regards

Remisteness,
There are a few things to mention regarding your problem:
1) Scanning all of the Drive(s) after Starting Import
Right after the import dialog opens, try to click onto an internal drive as soon as possible and uncheck "Include Subfolders". This should prevent the scanning of the drive(s).
2) What is presented to the O/S for an Encrypted Device
Obviously, your encryption software presents the "virtual" drives as removable devices to the operating system, which leads LR to treat them as "Cards".
I have a similar software in use to access encrypted data in "Container Files" (SafeGuard PrivateDisk). In SafeGuard PrivateDisk, I can configure how a "virtual" drive is presented to the Operating System, either as a removable device or as a simulated harddisk. If I choose "Simulate Harddisk", the "virtual" drive is represented like a harddisk in my WinXP and LR does not show it as a removable device, hence without the restriction imposed on "Cards" during import.
3) Restrictions imposed by LR while Importing from "Cards"
LR prevents users from moving photos when directly accessing a memory card, because if a file would get corrupted during import no valid copy of the image would exist anywhere anymore. Also, adding photos residing on a real memory card does not make sense either, as too many users would be looking for their original images after disconnecting the (and possibly reformatting) the memory card.
There has been a lengthy discussion in this forum lately on whether it makes sense or not that LR tries to protect users from their own wrong doing. I guess one can see it either way, and the limitations chosen by Adobe kind of protect Adobe from too many questions/accusations.
4) Workaround for LR 3.3
To be able to add or move from a removable device in LR 3.3, you can do the following:
Create yourself one or two Import Presets, with Add or Move as the action to be performed. You have to create these presets while doing a test-import from a interal or external HDD, and save them from there.
When accessing your removable device, access the drive by clicking onto the drive letter in the drive list below "Files", and not by clicking onto the removable device under "Devices"
Choose one of the Import Presets built in step 1
This will use Move or Add as the action to be performed (note that no action at all will be highlighted), even though you're importing from a "Card".
As this behaviour is a hidden/undocumented feature (or even bug?), we do not know whether this possibility will still be existing in future releases of LR, but for right now it seems to be a workaround.
Beat Gossweiler
Switzerland
P.S: After losing this entire post because of a Web-Error the first time I wrote it, I hope this information can help you over your problem.

XI SOAP receiver adapter. Java and decentral adapter engine.

Hi,
I would like to send the below to a web service... have done a custom mapping to
produce the entire message below, and turned off Use SOAP envelope option in the
receiver adapter.
Can anyone point me in the right direction (in terms of the correct why to go about this)
or to why it is not working? Because I see it in the payload option of the message fine (in RWB).
Can java mapping be used to build the entire message?
<SOAP-ENV:Envelope SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" xsi:noNamespaceSchemaLocation=" EnvelopeStructure.xsd">
<SOAP-ENV:Header>
<Q-ENV:Header>
<Q-ENV:Sender-Id>a03430170001</Q-ENV:Sender-Id>
<Q-ENV:Receiver-Id>1aa1150001</Q-ENV:Receiver-Id>
<Q-ENV:Correlation-Id>1231201109096878</Q-ENV:Correlation-Id>
<Q-ENV:Message-Id>M1231201109096878</Q-ENV:Message-Id>
<Q-ENV:Date-Sent>26 Apr 2004 18:01:08 CDT</Q-ENV:Date-Sent>
<Q-ENV:Document-Type>RequestForQuotation</Q-ENV:Document-Type>
<Q-ENV:Message-Format>Q 1.0</Q-ENV:Message-Format>
</Q-ENV:Header>
</SOAP-ENV:Header>
<SOAP-ENV:Body>
<Q-ENV:Body>
<Q-ENV:Content-Type>text/xml</Q-ENV:Content-Type>
<Q-ENV:Message-Type>xCBL</Q-ENV:Message-Type>
<Q-ENV:Encoding>UTF-8</Q-ENV:Encoding>
<Q-ENV:Message-Body>
blah blah
</Q-ENV:Message-Body>
</Q-ENV:Body>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
thanks
Dylan.

I am getting various errors, because I am not sure I understand how this adapter works exactly.
I would like to send a custom SOAP message.
I use a java mapping to create the entire soap message...
In the soap adapter I turn on "Do not Use SOAP envelope".
What should the final message sent out of the SOAP adapter look like ? Will a standard SOAP
envelope be added around it anyway?
Do I need to add beans after the XISoapAdapter bean in order to remove the soap envelope?
How do the modules work? Is there a good resource on the subject?

How to turn on internal SOAP engine to do validation and infoset augmentation

Similar Messages

Maybe you are looking for