How do I display line numbers? I am using the International Digital Publishing Forum EPUB Validator and the error messages refer to line numbers. Thanks, Earl

The validator gives me error messages messages that refer to line numbers and positions - very unhelpful. I need to be able to display the line numbers in the reader to find the places where the errors are. Can anybody point me in the right direction? MUch appreciated. Earl

Adobe Reader can't display epub files. Adobe Reader can't display line numbers.

Similar Messages

How to turn on internal SOAP engine to do validation and infoset augmentation

Hi,
How can I turn on the internal SOAP engine to do validation and infoset augmentation
so that
when I intercept the Body part of the SOAP message in my soap handler the XML
document
is ready for transformation? Thanks
Michael

Hi Michael,
Currently, no schema validation is performed when processing the SOAP or
WSDL. Primarily because of the negative impact of validation on
performance and also due to the lack of a very high quality (and fast)
schema validation. If there is an error in the XML during the processing
of a SOAP request, there will be a runtime error in either the
processing of the SOAP envelope or in the serialization of application
data between XML and Java.
There is a CR (CR082116) requesting an support optional validation XML
data sent to/from a webservice.
HTHs, Bruce
Michael Wong wrote:
>
Hi,
How can I turn on the internal SOAP engine to do validation and infoset augmentation
so that
when I intercept the Body part of the SOAP message in my soap handler the XML
document
is ready for transformation? Thanks
Michael

How we can display two list if not using blocked alv ,not scr painter

how we can display two list if not using blocked alv ,not scr painter

1. Once the cell number/service on the 3GS is transfered to the 5, the 3S will become basically an iPod touch until a new sim is in place, correct? We can still use wi-fi and the apps on the phone, and still be able to sync to iTunes, correct? iOS has been upgraded to 6.
1a. With a new Sim, any issue with losing any data/apps on the phone? I dont' think so.
1. Yes. without a sim it has no service, but all other features should be useable normally.
1.a Nope, Data and Apps are independent of the Sim.
2. Once the 5 is activated on the new carrier, how do I share the apps within iTunes? Is it as easy as using iCloud (which we haven't "activated" yet) and/or plugging both phones into iTunes and transferring between devices (authorizing both)? Photos? There are photos on the 3S that we will need on the 5.
2. As long as both Phones use the same Apple ID, the applications can be synced to each through iTunes. Also any downloads on one phone should appear in the other. Again as long as both phones are using the same Apple ID.
3. Reverse order for new apps purchased (understand that not all the iphone 5 apps will work on the 3GS)?
3. If they can be run on the iPhone3GS they should be synced automatically.
4. My husband also has a new iPad, any complications there with three devices? To date, he has not "shared" apps between his 3S and the iPad. He does not have iCloud set up, but plugs into his computer to backup and transfer photos.
4. If all 3 Devices share the same Apple ID all should be synced.
As a word of warning, if all 3 devices use the same Apple ID, messages recieved using iMessage will appear on all 3 devices.
And Conctacts may get overwritten if synced to iCloud (thogh you say he doesn't have one), or merged together.

How do I display ethernet connection is being used rather than WI-FI connection in the menu bar/elsewhere?

I have a new 13" retina MacBook Pro - I have wi-fi connection but also a thunderbolt/ethernet adapter that allows me to connect to my network
Sometimes, the ethernet connection does not connect and I do not notice for a while (possibly a dodgy TP-LINK plug adapter thingy)
My question is - how can I display that I am connected/using the ethernet connection rather than the wi-fi? The wi-fi symbol stays in the menu bar but it would be nice to see that I am using the ethernet connection instead
Many thanks
Mike

I don't think you can do that. You can only display the WiFi connection on the menu bar.

I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

I submitted my podcast and I got an email saying error, I checked with the feed validator and got this message: This feed does not validate. line 40, column 6: Undefined item element: itunes:order, how do sort this out, someone help me please.

Ignore it. 'itunes:order' is a recent addition which FeedValidator doesn't know about. If your podcast is rejected that is unlikely to be the reason. Of course as you haven't posted the feed URL nor the text of the error message I can't make any further comment.

Help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

help. I have a Google Hangout in 40mins and my sound seems to have vanished. I went to Sys Prefs and it came up with Digital Out....and the Internal Speakers option is no longer there. How do I reboot, or fix this please?

There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. If not, the machine needs to be serviced. Inserting any kind of tool in the port may cause damage that won't be covered by the warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/Audio
Right-click or control-click the highlighted line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
14. Reinstall OS X after backing up all data.
15. Make a "Genius" appointment at an Apple Store.

Error Message with multiple line

Hi
How to display a error message with multiple line?
Example
     Goods movement not possible for material 101
     Goods movement not possible for material 102
     Goods movement not possible for material 103
is it possible is ABAP? If so please advice me.
Best Regards
Asheek

Hi Anoop,
You can use same thing like this
I suggest write ur message through this.
First set the obecj.
CALL FUNCTION 'APPL_LOG_SET_OBJECT'
for local memory
FUNCTION 'APPL_LOG_WRITE_MESSAGES'
         EXPORTING
              OBJECT              = OBJECT
              SUBOBJECT           = SUBOBJECT
              UPDATE_OR_INSERT    = UPDATE_INSERT_FLAG
         TABLES
              MESSAGES            = MESSAGE_TABLE
         EXCEPTIONS
              OBJECT_NOT_FOUND    = 1
              SUBOBJECT_NOT_FOUND = 2
              OTHERS              = 3.
the call for physical memory
CALL FUNCTION 'APPL_LOG_WRITE_DB'
In this process you only need to provide the Itab with error messages.
Reg,
Arpit

Tried to open a file I created in Numbers a while ago which I modified on 11/4/13 and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed. Any suggestions?

Tried to open a file I created in Numbers a while ago, which I modified on 11/4/13, and got a message that I needed a newer version of Numbers. When I went to the Mac App Store it shows that the new version is already installed and there doesn't seem to be a way to reinstall it. When I checked "About Numbers" on my MacBook it shows "Numbers '09 version 2.3". Any suggestions as to how I can get the new version installed?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

How to populate field catalogue fields in ALV using dynamic internal table

Hi All,
Please let me know how to populate field catalogue fields in ALV using dynamic internal table.
I have created <dyn_table> using code below.
CALL METHOD cl_alv_table_create=>create_dynamic_table
                 EXPORTING
                   it_fieldcatalog = g_t_ifc
                    it_fieldcatalog = g_t_fieldcat
                 IMPORTING
                    ep_table        = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Now this <dyn_table> has fields like idoc no.,creation date ,
segment field 1, segment field 2 etc..Now idoc no.,creation date are static fields from table EDIDC. And segment field 1, segment field 2 etc are dynamic fields from table EDSAPPL.
In my ALV report I am getting the final layout properly but I am unable to move values to corresponding fields in the final layout shown.Please let me know how to populate these fields from different tables.
I tried this way but its not working.
SORT g_t_edid4 BY docnum.
LOOP AT g_t_edidc INTO g_r_edidc.
    READ TABLE g_t_edid4 into g_r_edid4
                     WITH KEY docnum = g_r_edidc-docnum
                                    BINARY SEARCH.
    IF sy-subrc = 0.
      <dyn_wa> = g_r_edid4-sdata.
     MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
   CLEAR g_r_edid4.
    ENDIF.
MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.

You have to assign each field to field symbol and then assign the value to that field symbol and asssign that field symbol to workarea field symbol.
LOOP AT g_t_edidc INTO g_r_edidc.
READ TABLE g_t_edid4 into g_r_edid4
WITH KEY docnum = g_r_edidc-docnum
BINARY SEARCH.
IF sy-subrc = 0.
ASSIGN COMPONENT 'SDATA' OF STRUCTURE <DYN_WA> TO <DYN_FLD>.
<DYN_FLD> = g_r_edid4-sdata.
" <dyn_wa> = g_r_edid4-sdata.
" Assign each fields like this.
" MOVE-CORRESPONDING g_r_edid4 to <dyn_wa>.
CLEAR g_r_edid4.
ENDIF.
" MOVE-CORRESPONDING g_r_edidc to <dyn_wa>.
APPEND <dyn_wa> TO <dyn_table>.
Regards,
Naimesh Patel

I can't seem to enlarge the text on my news apps SI and The New Yorker. Yet, I can touch and expand the test on my mail and websites. How come?

I can't seem to enlarge the text on my news apps SI and The New Yorker. Yet, I can touch and expand the test on my mail and websites. How come?

I heard someone once talking about the NY app - it's the best selling one in the publisher's line (Conde Nast?), and they deliberately kept it as simple and "untechy" as possible - the closest in their line to the actual print edition. The discussion was on how it was surprising that the magazine with the least amount of "bells and whistles" was their best seller... and a speculation that it was because it was so simple and uncluttered. Perhaps their decision to remove pinch & zoom was related to that idea.

HP printer2504 error message Printer off line?

My printer has suddenly stoped working error message/ Printer off line? how do I rectify this?

Is the printer connected wirelessly?
Have you given it a fixed IP address, or is it receiving it via DHCP?

Hello Apple? How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

How do i fixed my problem with my ipad apps every time i open that apps it takes 10min. to play the games ant its getting LOST MODE and the ipad system is crashing

We are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Have you tried closing all apps via the iPad's multitasking bar and then doing a soft-reset and seeing that helps ? To close all apps :
iOS 7: double-click the home button to open the taskbar, and then swipe or drag each app's screen from there up and off the top of the screen to close it, and click the home button to close the taskbar.
iOS 6 and below : from the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

How do I set up mutiple icloud accounts using my Apple ID but giving my children (and their ipod touches) their own icloud e-mail, so we do not share contacts photos etc

How do I set up mutiple icloud accounts using my Apple ID but giving my children (and their ipod touches) their own icloud e-mail, so we do not share contacts photos etc

Welcome to the Apple Community.
Create an iCloud account for each of them.

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in?

How can I get a file to copy all of the files in a directory except itself and the source of the copy function will be the directory the final program is in? This application must be in Lab View 8.

you mean something like this (see below)?
Now you may have to implement code to check if the destination folder exists and to create it, etc. But if you use the Front Panel Control to select the destination folder, it should be okay.
Not the best implementation, mind you but you'll get the idea..
Message Edited by JoeLabView on 04-18-2007 03:43 PM
Attachments:
copy folder contents.PNG ‏10 KB

I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

I came into the store because my middle button was not working. Then they gave me a middle button that's on the screen of my phone. I got a new phone do now my middle button doesn't work but I still have the internal digital button, how do I remove it?

Settings>General>Accessibility>(scroll down to)AssitiveTouch and change to Off

How do I display line numbers? I am using the International Digital Publishing Forum EPUB Validator and the error messages refer to line numbers. Thanks, Earl

Similar Messages

Maybe you are looking for