How To Undo A Recently Processed Command

Hi,
If I recently processed a command:
CmdUtils::ProcessCommand(someCmd);
How do I undo the said command?
Should I use:
ICmdHistory->Undo(steps, target);
The target here is the IDatabase that I can get from ICommandMgr->GetTargetDB(), right?
Thanks,
-- Jeff

Linc Davis wrote:
I'm not sure what you mean, but if you gave those instructions, please don't do it again. There is absolutely no reason ever to run such a command, even if the syntax were correct. Also, make sure you test any advice you give on this site on your own computer, as required by the terms of use.
I have given that command, but with the proper syntax, any number of times, with absoutely no adverse affects. When I do give that command, or any command with rm, I take great pains to emphasize that it absolutely must be copied and pasted in. And I triple and quadruple check the syntax before I post it. And then I make sure that the Jive formating hasn't screwed with it in any way after posting. Given certain situations, it can be very useful.

Similar Messages

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million :)

Hi guys, I have a big problem! My bookmark shortcut entry(command D) does not work anymore and do you know by any changes how to undo resetting of Safari? Thnx a million

Try troubleshooting the Safari .plist file.
Quit Safari.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Relaunch Safari. Try a bookmark.
If that didn't help, check Safari / Preferences then select the Extensions tab. If you have any installed, turn that off, quit then relaunch Safari.
If Extensions aren't the issue, reset Safari. From the menu bar click Safari / Reset Safari. Select the top 7 buttons, click Reset.

How to undo terminal commands

...sigh... being new to MAC I shouldn't have just assumed I could putz around and make changes like I used to with PC.
So, I use Gradebook (I'm a teacher) and unfortunately, it's reliant on Java.
So the other day I made the mistake of updating Java and it sent my world into a tailspin. Gradebook suddenly stopped working. It would just bounce in my dock but never open.
Then I found out it was having issue with the new Java. So I found instructions to reverse the Java update and go back to Java 6 here which required me to go into terminal and make changes: http://support.apple.com/kb/HT5559?viewlocale=en_US
I did that. Now everyone claims that Gradebook fixed their issue with the new Java. But I'm still having that bouncing then nothing problem. So someone suggested I upgrade to Mavericks. So I did... and when I re-tried Gradebook it told me I needed to download Java 6 for it to work, so I got excited thinking my problems were solved. But nope... bouncing in the dock then nothing.
Now I'm thinking those changes I made in Terminal are what the problem is. So I googled how to remove those entries and I went into .bash and deleted them (kept a copy of what I was deleting though, just in case) Didn't work. So now I've read that I have to UNDO my changes and not delete them. But I have no idea how to do that.
This was my entire history in that .bash file:
/Applications/Android\ File\ Transfer.app/Contents/MacOS/Android\ File\ Transfer ; exit;
'lookupd -flushcache''lookupd -flushcache'
'lookupd -flushcache'
'lookupd -flushcache
'lookupd -flushcache'
/Applications/Gradebook.app/Contents/MacOS/JavaApplicationStub ; exit;
sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
sudo mv /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/disabled
sudo ln -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
sudo mkdir -p /Library/Internet\ Plug-Ins/disabled
sudo mv /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/disabled
sudo ln -sf /System/Library/Java/Support/Deploy.bundle/Contents/Resources/JavaPlugin2_NPAPI .plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo ln -s /System/Library/Java/Support/CoreDeploy.bundle/Contents/JavaAppletPlugin.plugin /Library/Internet\ Plug-Ins/JavaAppletPlugin.plugin
sudo update_prebinding -root / -force
sudo update_prebinding -root/-force
exit
sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
man sudo
sudo ln -sf /System/Library/Frameworks/JavaVM.framework/Commands/javaws /usr/bin/javaws
The red are the ones I put in. That blue one references Gradebook but I don't recall entering that.
Help me please??? I'd really, really appreciate it!

There are instructions at the bottom of the page you linked to that tell you how to undo it.
Editing the .bash_history file only removes commands from the recorded history, it doesn't undo them. Although doing that isn't going to cause any problems, it does reveal a tendency to fiddle with "arcane knowledge" without fully understanding it. That's very, very bad, as doing the wrong thing in the Terminal could easily cause irreversible damage to the system that can only be fixed by reinstalling. It could even lead to data loss.

Help, i made a terminal command and i don't know how to undo it.

i found my long lost folder of terminal commands.. and i forgot what this one did, so i clicked it (i made the commands into a "unix executable file").. and all my files on my desktop are now hidden.. the only way to find them is to type in the file name into finder.
the command i typed in was
while (true) do
chflags hidden ~/Desktop/*
done
and now everything on my desktop is gone, and i dont know how to undo it, I undid once about 3 months ago when i wrote it, but i forgot what i did. I tried counterering the command with others but it isn't doing anything. thank you
edit: i know this command cant destroy my system because it wasn't a sudo, but still, i had all my class work on my laptop and now it's all invisible

Hi, try this...
while (true) do
chflags nohidden ~/Desktop/*
done

Error when trying to print. Not enough storage is avail. to process command. How can I fix this?

HP Officejet 6500 All-In-One
This is what pop's up when I try to print.
An error has occured in script on this page.
Not enough storage is available to process command.
Please tell me how to fix this, I give up!
Thanks,
Cindy

Hi Cindy,
What operating system are you using?
Open Computer / Myl Computer, right click Driver C and click on Properties - how much free hard-disk space you have on the drive?
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Unable to delete a printfile using Bonjour - "Error Processing Command"

I recently installed Bonjour on a DELL Dimension E310 machine running Windows XP. It is connected to a small network of office computers. One of them is an Apple. The Apple computer has an HP color printer attached to it via a USB cord and it is shared on the network.
After installing Bonjour on the Windows XP machine, I tried to print a test page on the shared HP color printer, but it did not print.
When I looked at the pending documents on the shared HP color printer, turns out there is a print file that is stuck. It will not print and I can not delete it either. Comes back with an error "unable to process command" or "Error processing command".
After more investigation I've discovered the actual print file name is: "smbprn.00000011" and it was sent to the printer back in November of 2009.
How can I delete this print file???
I've uninstalled Bonjour and re-installed it to see if this would delete the print file, but it did not work.
I've done a hard reset on the HP color printer and rebooted the Apple computer it's connected to. The Apple computer can print to the HP color printer just fine, but the Windows XP machine can not.
I've also searched the entire disk drive on the Apple computer AND the Windows XP machine for the "smbprn.00000011" file, but it was not found. I even searched all the system and hidden file folders too with no luck.
How can I locate and delete this print file that is stuck ???
All suggestions are welcome and appreciated.
Thank You,

Check the table name in your MRD process and make sure it's the right one. Also ensure the "checked" value of the checkbox is correct (i.e.: is the checkbox based on the correct key column from the report?).

RAC 'how many rows left to process'

Hi guys
I m recently start working on RAC.
I m try to find out , after running a query .
How to find out that "How many rows are left to process by stmt'
Is there any script available would be great help
Thanks.

user12281508 wrote:
Thanks aman for prompt response.
I m try to find out if i run update stmt. which update xyz rows. i dont know the row count.
5 min after fired of this stmt. i want get information that how many row it has updated so far and how much is left. What's the reason for such requirement? I can't think of anything which would require this except that the Update is updating some millions of rows and you want to know when it would eb finished. But even for that, there is no way to know AFAIK that how many rows currently have been effected by the statement.
does the total_work.gv$session_longops , column can help ????No, that would only show the total work done in % . It won't reveal and update continously the row count of rows getting updated.
joining v$session, v$transation , v$rollstat can only tell me how much undo blocks are used so far, not rows.Nope, as I said already, there is no way at least in my knowledge to check this and IMO, there is no need to know this as well.
HTH
Aman....

Help - Multiple errors occurred on the server while processing commands

I am trying to start ical server on a fresh install of os x server 10.5, but I receive the following error messages: "Multiple errors occurred on the server while processing commands. Use the console application to view the error message" then I hit "ok" and then if i try to enable the iCal service, up pops up another window saying: "an error occurred onthe server while processing a command. Error 'CANNOTLOAD_BUNDLEERR' occurred while processing a command of type 'writeSettings' in plug-in 'servermgr_calendar'
what's going on? how do i proceed to enable the iCal service? here is my error log:
servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:22:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:50 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a398170>
May 25 13:23:50 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:23:51 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a390c30>
May 25 13:23:51 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:23:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:23:58 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3cabf0>
May 25 13:23:58 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'setState' in plug-in: 'servermgr_calendar'
May 25 13:24:04 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396e50>
May 25 13:24:04 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:05 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a396370>
May 25 13:24:05 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:24:10 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a38ad80>
May 25 13:24:10 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d6980>
May 25 13:24:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:24:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:25:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:26:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:27:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:28:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:29:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:30:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:31:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:32:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:33:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:34:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:35:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:36:59 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:37:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:38:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39a0d0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:39:14 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a39b2a0>
May 25 13:39:14 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:39:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:40:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:41:33 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3d55b0>
May 25 13:41:33 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'getState' in plug-in: 'servermgr_calendar'
May 25 13:41:34 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3c1ba0>
May 25 13:41:34 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'readSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:36 plgs-server Server Preferences[70930]: XSAdminQueueController: gotServerError: CANNOTLOAD_BUNDLEERR forTransaction: <XSAdminTransaction: 0x1a3835c0>
May 25 13:41:36 plgs-server Server Preferences[70930]: ERROR: The server 'PLG-Server.local' reported the error: 'CANNOTLOAD_BUNDLEERR' while processing a command of type: 'writeSettings' in plug-in: 'servermgr_calendar'
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:41:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; using default group services settings
May 25 13:42:54 plgs-server servermgrd[56]: servermgr_web: Unable to get valid response from servermgr_teams; no themes

no idea how to set up a dns. can you point me in the right direction? thanks

How can I run Runtime.exec command in Java To invoke several other javas?

Dear Friends:
I met a problem when I want to use a Java program to run other java processes by Runtime.exec command,
How can I run Runtime.exec command in Java To invoke several other java processes??
see code below,
I want to use HelloHappyCall to call both HappyHoliday.java and HellowWorld.java,
[1]. main program,
package abc;
import java.util.*;
import java.io.*;
class HelloHappyCall
     public static void main(String[] args){
          try
               Runtime.getRuntime().exec("java -version");
               Runtime.getRuntime().exec("cmd /c java HelloWorld "); // here start will create a new process..
               System.out.println("Never mind abt the bach file execution...");
          catch(Exception ex)
               System.out.println("Exception occured: " + ex);
} [2]. sub 1 program
package abc;
import java.util.*;
import java.io.*;
class HelloWorld
     public static void main(String[] args){
     System.out.println("Hellow World");
} [3]. Sub 2 program:
package abc;
import java.util.*;
import java.io.*;
class HappyHoliday
     public static void main(String[] args){
     System.out.println("Happy Holiday!!");
} When I run, I got following:
Never mind abt the bach file execution...
I cannot see both Java version and Hellow World print, what is wrong??
I use eclipse3.2
Thanks a lot..

sunnymanman wrote:
Thanks,
But How can I see both programs printout
"Happy Holiday"
and
"Hello World"
??First of all, you're not even calling the Happy Holiday one. If you want it to do something, you have to invoke it.
And by the way, in your comments, you mention that in one case, a new process is created. Actually, new processes are created each time you call Runtime.exec.
Anyway, if you want the output from the processes, you read it using getInputStream from the Process class. In fact, you really should read that stream anyway (read that URL I sent you to find out why).
If you want to print that output to the screen, then do so as you'd print anything to the screen.
in notepad HelloWorld.java, I can see it is opened,
but in Java, not.I have no idea what you're saying here. It's not relevant whether a source code file is opened in Notepad, when running a program.

How to map expdp parallele process to output file

How to map expdp parallel process to its output file while running...
say i use expdp dumpfile=test_%U.dmp parallel=5 ..
Each parallele process writing to its related output file.. i want to know the mapping in run time...

I'm not sure if this information is reported in the status command but it's worth a shot. You can get to the status command 2 ways:
if you are running a datapump job from a terminal window, then while it is running, type ctl-c and you will get the datapump prompt. Either IMPORT> or EXPORT>
IMPORT> status
If you type status, it will tell you a bunch of information about the job and then each process. It may have dumpfile information in there.
If you run it interactively, then you need to attach to the job. To do this, you need to know the job name. If you don't know, you can look at sys.dba_datapump_jobs if prived, or sys.user_datapump_jobs if not prived. You will see a job name and a schema name. Once you have that, you can:
expdp user/password attach=schema.job_name
This will bring you to the EXPORT>/iMPORT> prompt. Type status there.
Like I said, I'm not sure if file name information is specified, but it might be. If it is not there, then I don't know of any other way to get it.
Dean

Create .txt empty file After Message Processing Command Line Linux command

Hi All,
An empty .txt file has to be created in FTP location(FTP loc c:\xyz\Customer20082910.txt) only after the .dat file has been created(FTP loc c:\xyz\Customer20082910.dat)
Note:.dat has the actual data and .txt is an empty file and is created only after .dat is created
I know that .txt empty file can be created using the After Message Processing Command Line...
But confused which command to be given such that it will be created in the FTP location(c:\xyz\Customer20082910.txt)
Can any one please give the Linux command for it...
Regards,
Sridhar

Hi Aamir,
Thanks for the suggestion, I will ask my client to create a shell script at FTP server...
And one more question,
This is reverse side , now the .dat file is to be picked only if .txt exists at the FTP server (scenario File > XI>SAP) (earlier was SAP>XI>File)..
So please can you suggest for this also...
How can i check for the .txt and pick corresponding .dat file...
i had posted question long back
Need to pick .TXT file only if .CTL file is available
Regards,
Sridhar

How to determine the Parent process information in Oracle BPMS 10g

Hi ,
I am trying to retrieve the parent process information given the instanceId and Process Id of an instance of a process from a different process.
I am getting the instanceId of the instance in workspace using the Fuego.Papi.ProcessService and by creating the Filter.
I tried using the ProcessInstance.parent but it needs to be instantiated using the instance details of my referred instance, which i am not able to do.
Can some one shed some light on how to get the parent process details from the referred instance.
Thanks,
shravan.

Hi,
If you mean to increase the request timeout i.e the time when a request is submitted to the server and the response is sent by the server it can be done in httpd.conf file located in $OracleHome/Apache/Apache/conf directory.
The attribute to be used for setting timeout is "Timeout". By default teh value is 600 seconds i.e 5 minutes.
After making these changes , run command dcmctl updateConfig -ct OHS and restart the HTTP Server. Please note these commands need to be run only if the httpd.conf changes are done through text editor.
Hope this helps.
Smita

How to schedule infospokes in process chains..

Hi All,
I have a few infospokes to be scheduled in a process chain. In each infospoke, I have upto 10 jobs that are to be scheduled one after the other. At the end of these jobs I have to run a FTP script. I am new at creating the process chains. So can anybody help me out in letting me know:
1. How to create a start process where I can select a given job by using its name
2. How to run a FTP script as a follow up step on completion of a previous step.
Thanks in advance
John

Hi John
it a big task to explain all so I will try to give you the high level picture.
1. process chain is easy to implement and learn.
   usually it is triggered either by a batch job or a
   batch job that fires an event.
2. to call an OS (like Win or Unix) from the PC you can
   trigger an event from the end of the PC to call a
   ABAP program that will initiate an OS call.
   you use trx: SM69   - External Operating Sys Commands
   to set this call up.
3. to implement an FTP you can do via a batch file with
   OS commands or by using free utilities (there are many of them).
I hope it helps.
Edan

How to check the parent process chain of a meta chain

Hello Friends,
Recently I joined a new project, which is of environment BW 3.0. I am trying to find the dependent process chain's parent, but could'nt able to find them. I went through all the process chains manually to check whther the dependent process chain is mentioned in them, but could'nt find any......
Can any of you help me to know how to find the parent process chain of a meta chain ?
I really appreciate your time, will be awarding points to any answers.......
Thanks,

Hello Radhan,
thanks for your quick reply. I searched the table based on your advice, but i could'nt get the parent process chain's name. Can you throw some more ideas please..........
Thanks,

HOW DO I DELETE RECENT PROJECTS FROM ADOBE PREMIERE PRO?

How Do I delete recent projects from Premier Pro/

PrPro does not have a "database" like say, Lightroom does. It does have a cache of files in a couple different places, but if you simply go to the location of the project file & delete it, and the cache files where there are placed ... you've deleted the "project".
Some people have all cache files put in one spot just for this ... they can quickly go & delete jobs once delivered. Often after using the project manager to copy files to a drive for storage, then deleting the cache files for that project. Or there computers would blow up from the gigs of material video processing on a daily basis entails ...
Neil

How To Undo A Recently Processed Command

Similar Messages

Maybe you are looking for