How to update information fields of a profile in Oracle UCM using RIDC

Hi All
I have a requirement in which i need to modify/update the metadata/information fields of a Profile in Oracle Webcenter Content(UCM).
I found out that this can be achieved using RIDC api, but i have little knowledge about the same.
If someone could suggest about how to retrieve and update the fields in UCM using RIDC or some other approach would be of great help.
It's really important.Kindly help
Regards
ACM

user13069455 wrote:
Hi Jiri
Even i have thought about the same as one of the approaches, but i was a bit apprehensive about using this one.
I have few stupid queries regarding this:
1)Will it expose the production database(connection details) to the environment?Yes. If you don't like the idea of giving connection to the database to a "third-party" program, you could go from the other side - create a UCM component (some kind of scheduled job), which will be a part of UCM, but do the same. It will be a bit more complicated, but might be considered more secure.
2)Will it have any performance impact?I don't think there will be much impact - most of time, tables will be accessed in read-only mode (pulling the data out), so except few per cent of CPU and some memory it should not consume anything. Besides, you should be able to schedule upload to "quiet hours", if there are some
3)Will it still be an integration with the UCM?Well, yes. It will be integration at the database level. But honestly, as long as it works, do you care how is it called?
>
Thanks
ACM

Similar Messages

How to update key fields for table

Hi,
how to update key fields for a table.The update statement is not working for the same.
Regards,

Hi,
See the below example.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
Regards,
raj.

How to update single field

Hi frnds,
                    How to update single field data in Z table .
                   I am taking data from screen, when i press update button the data will store specific field data in Z table.

Dear Rakhi,
You can use the below syntax.
Hope this would solve your problem.
LOOP AT tpra INTO wpra.
    UPDATE zpra
    SET    pra2 = wpra-pra2
    WHERE pra1 = wpra-pra1.
ENDLOOP.
In WHERE give KEY VALUES
In SET give the particular value that has to be changed.
Regards,
Pintoo
Edited by: pintoo2805 on May 18, 2010 7:10 AM

How to update ABSKZ field in the table EKPO

Hi
Is there any way to update the rejection indicator (ABSKZ) field of table EKPO?.
I am looking at BAPI_CHANGE_PO FM, But it does not have ABSKZ field in the item structure BAPIMEPOITEM.
Do I need to extend the BAPI structure with ABSKZ field ?
Regards
Raj.

Hi
To extend BAPI_PO_CHANGE for EKPO-ABSKZ field , we have to add field in the structure BAPI_TE_MEPOITEM to pass it to EXTENSIONIN. As ABSKZ field already availble in the EKPO it is not allowed to add ABSKZ in the structure BAPI_TE_MEPOITEM. it is throwing below error message.
Field ABSKZ in table EKPO is specified twice. Please check
Since it is not Z field and also not availble in the structure BAPIMEPOITEM not sure how to update ABSKZ field in the EKPO table.
Please advice.
Regards
Raj

How to update 2 fields automatically rest manually on page

Hello folks,
I have got a question on how to update 2 fields in a table automatically (in my case this is one field for the user and one field for the correct date and time). This should happen automatically every time an user changes a row in the table. But it seems as if i cant change the fields i tried it with the changing of the textfield but he dont change the values in the database. I even tried a separate update statement but since this is set after the commitchanges() command it seems as if he ignores any following commands.
So anybody a good idea how i can change easily these two data fields? I just cant believe that you must manually change the fields, thats not the use of these 2 fields.
Thanks in advance for your help
Acinonyx

To be exact i have got a page with different fields which get their data from my database. Two fields which contain an userid and the other a date and time value should get updated automatically when the user changes something of the other values on this page and press a button which calls the commitchange method. But since this should happen automatically and not manually i cant put these changes in the database. The manual changes are saved without any problems but the automatical changes not. So my question is how can i change a value programmatically and make him save these canges in the database?
I already tried to put the new values in the fields or even detailed in the database but i cant get him to update these two fields.
Acinonyx

How to update the field ZLSPR of table BSEG

HI Friends,
Can anyone tell me how to update the field ZLSPR of table BSEG? I've a 700 line abap program and I should include some logic in this program to make an entry into BSEG-ZLSPR. Is there any FM/BAPI available? Is BDC a healthy approach?. My team lead do not want me to use UPDATE statement....please help.
Thanks in advans,
Varsha.

Hi,
Hi ,
You will need to group that radiobuttons so that SAP knows they are linked together. To do this using the grahical layout editor simply select all the radiobuttons and then right click on them, Now choose define group. Once you have done this you should not need any of the "clear" or "='X'" statements SAP should control it all for you.
hope this helps
Reward if found helpfull...
Venkoji Babu.

How to update html file in clob column in oracle

hi,
please help me how to update html file in clob column in oracle
Thanks

This is your main query as i am able to understand and you want to update your html file into terms columns based on conditions :
SELECT     b.terms As terms
         FROM chklst_item_x_enrlmnt_type a, prvdr_enrlmnt_agreement b
        WHERE a.enrlmnt_type_cid = 1
          AND a.chklst_item_cid = b.chklst_item_cid
          AND a.chklst_item_cid = 79
          AND a.oprtnl_flag = 'A'
          AND b.oprtnl_flag = 'A'
          AND TRUNC (SYSDATE) BETWEEN b.from_date AND b.TO_DATE;So i suggest below one but you need to create a directory where you can store your html file and then you can update .. And remaining consult Experts suggestions too as your
question is improperly posted . . .
DECLARE
   vclob     CLOB;
   v_bfile   BFILE := BFILENAME ('YOUR_DIR', 'filename.html');
BEGIN
   SELECT     b.terms
         INTO vclob
         FROM chklst_item_x_enrlmnt_type a, prvdr_enrlmnt_agreement b
        WHERE a.enrlmnt_type_cid = 1
          AND a.chklst_item_cid = b.chklst_item_cid
          AND a.chklst_item_cid = 79
          AND a.oprtnl_flag = 'A'
          AND b.oprtnl_flag = 'A'
          AND TRUNC (SYSDATE) BETWEEN b.from_date AND b.TO_DATE
   FOR UPDATE;
   DBMS_LOB.fileopen (v_bfile);
   DBMS_LOB.loadfromfile (vclob, v_bfile, DBMS_LOB.getlength (v_bfile));
   DBMS_LOB.fileclose (v_bfile);
END;
/ Regards..

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

How to update flex field data on a human task?

After entering a human task and assigning the data how do you then update flex field data whilst the task is still assigned. I'm using the task services to communicate with the task and applying filters based on the flex field data.
I want to update the data when actions take place on the task e.g. suspend, aquire, release.
Any ideas?

You can fetch the task , change the flex attribute value and update the task. Find below the steps we do for updating one of the TextAttribute
Task completeTask = // get the task using task query service
completeTask.getSystemMessageAttributes().setTextAttribute2(updatedfolderName);
completeTask = // update the task using "updateTask" method

How to update the field of a Parent enity (field is not visibe on the Form) from a Child Entity in MSCRM 2013

Hi All,
I m new to CRM customization. I have requirement like this..
I have 3 entities.. Entity1 , Entity 2 and Entity3.
Entity1 is the parent of Entity2 and Entity3. Entity2 is the parent of Entity3 and child of Entity1 ..
In Entity1 I have a field eg:product1 which acts as lookup for Entity2 field availableproducts. Now in Entity2 I have a field the quantity of products which acts as lookup for Entity3 as given below.
In Entity3: fields:;; products==Lookup of Products(Entity1)
quantity == Lookup of Quantity (Entity2)
Now from Entity3 I need to update the fields of Entity1 like I have field named Price which is not visible on the Entity3 Form but when I access this field from javascript I m getting null exceptions since the field is not in the context of the Entity
on which it is defined. How can I update the fields of the Parent Entity1 from child Entity3 and also update the quantity field on Entity2 which are not avialable on the Entity3 Form.
Any help is appreciated
Waiting for the reply..
FayazSyed

Hi,
To do it in JS you need to use oData, as wrote above:
to make this requests easer, i use a XrmSvcToolkit library (https://xrmsvctoolkit.codeplex.com/)
Your code will be about this:
/// <reference path="rtb_XrmSvcToolkit.js" />
XrmSvcToolkit.retrieve({
entityName: "Entity1",
id: Xrm.Page.getAttribute("quantity").getValue()[0].id,
select: ["my_FieldNeedToUpdate"], //Here are the name of your fields, which you want to select.
expand: [""],
async: false,
successCallback: function (result) {
FieldNeedToUpdate= result.my_FieldNeedToUpdate;
errorCallback: function (error) {
Error = error;
FieldNeedToUpdate = FieldNeedToUpdate + 1; //Doing some work here
var InputEntity =
my_FieldNeedToUpdate: FieldNeedToUpdate //here are fields, witch you want to update
XrmSvcToolkit.updateRecord({
entityName: "Entity1",
id: Xrm.Page.getAttribute("quantity").getValue()[0].id,
entity: InputEntity ,
async: false
Here are more samples:
https://xrmsvctoolkit.codeplex.com/SourceControl/latest#Samples/XrvSvcToolkit.Samples.updateRecord.js

How to update the field 'VBRK-ZUONR' of Billing Document Header(VF03)

Hi Experts.
I got a request to update the field 'VBRK-ZUONR' of Billing Document Header(T-code:VF03).
At first i thought it might be a BADI or User-Exit case and looked up in Standard Program but found nothing.
Thus i doubted if it was a configuration problem.
I tryed to configure through transaction code "VTFA" "VTFL" "VTFF" and met another failure.
Now i'm totally lost and hope for your advice,any information would be appreciated.
The Billing Document is automatically generated from the posting of Outbound Delivery.
Regards.
Panda.

Hi friends.
I've found where point is.
The include program 'RV60AFZC' contains a form named 'USEREXIT_FILL_VBRK_VBRP',
in which the field 'VBRP-ZUONR' could be set through coding.
In our system the codes had been changed once,which led to the misalignment that confused me yesterday.
On the other hand,undoubtedly VTFL is available to configure the value of 'VBRP-ZUONR'.
For more information plz refer to
http://help.sap.com/saphelp_46c/helpdata/en/18/f62c7dd435d1118b3f0060b03ca329/content.htm
Thanks again to all of you.
Best Regards
Panda.

How to update Reference field in the clearing document

Hi Friends,
While accounitng for billing document for sales Reference Key 2 is used for a data.
Now when the payment is recieved from customer and accounted, how to update the Ref 2 automatically from the primary document.
Pl, suggest.
Thanks
NNS

Hi Robert,
Thanks for answering.
I am looking at Ref 2 should flow automatically to clearing document from the accounitng document for billing.
Ex: Billing document is created and accounted. Ref 2 is AB
Now when receipt is accounted for this biling document this AB should flow automatically to Ref 2 field.
Thanks
NNS.

How to update some fields of EBAN in ABAP code

Hi, all
In my ABAP program, I have to update two fields of EBAN .
But I could not find any function or BAPI about it.
Would anyone out there be able to help.
Many thanks
Aysenur

Hello,
Try with these FM.
Function group                 Function group short text
Name of function module        Short text for function module
MEWF                           BAPIs for Release of Requisition/PO
BAPI_REQUISITION_RELEASE       Release Purchase Requisition Item by Item
BAPI_REQUISITION_RELEASE_GEN   Release Entire Purchase Requisition
BAPI_REQUISITION_RESET_RELEASE Cancel Release of Purchase Requisition Items
BAPI_REQUISITION_RESET_REL_GEN Cancel Overall Release of Purchase Requisitions
MEWQ                           BAPIs Requirement Coverage Request
BAPI_REQUISITION_CHANGE        Change Purchase Requisition
BAPI_REQUISITION_CREATE        Create Purchase Requisition
BAPI_REQUISITION_DELETE        Delete/close purchase requisition
BAPI_REQUISITION_GETDETAIL     Display Purchase Requisition Details
BAPI_REQUISITION_GETITEMS      Read Purchase Requisition Item
BAPI_REQUISITION_GETITEMSREL   List Purchase Requisitions Awaiting Release
BAPI_REQUISITION_GETRELINFO    Display Detailed Release (Approval) Information on Purchase Requisitio
If useful reward points.
Vasanth

How to update the field EKET-WEMNG (delivered) in database using BAPI.

Dear All,
How to update the values to good received field for EKET WEMNG (delivered) in database using BAPI and please give me the standard bapi and explain the process how to update to database bcoz am new to bapi concepts and i will be thankful to your help.
Regards,
Tazeer.

this field is only updated when you do a goods receipt.
So the only BAPI that can do this is the BAPI GoodsMovement (BUS2017)

How to update the field BSEG-BDIFF

Hi to All,
do you know some funciont module or BAPI that update the field BSEG-BDIFF ?
Thanks a lot.
Best Regards,
Umb.
Edited by: Umberto Panico on Jan 18, 2011 10:40 AM

Hi,
Please check these FM.
G_FI_UPDATE
G_BKPF_BSEG_UPDATE
If they don't work, you may need to write BDC program or find the user exits available to update the field.
Regards,
Siva

How to update information fields of a profile in Oracle UCM using RIDC

Similar Messages

Maybe you are looking for