How to Update T710S table from Program or any FM or BAPI or Any BDC

Hi,
I want to update T710S table, Is there any FM or BAPI or Is it possible through BDC, If any body did that, Please Reply me ASAP.
Regards
Jan

Hi Guillaume
The First FM have update the some Fields only not all fields, So i hope it will not work.
Second FM retrieve the Data, Not for updating.
in my guess Need to write Z report or FM.
if any body have written previously, Please reply me, it would be appreciated.
Regards
Jana

Similar Messages

How to update one table from another table?

Hi,
Please go through the case I am mentioning below and if possible try to provide with a solution.
I am working on a report to generate cash flow forecast, where in one of the fields is "Payroll", in which its being mentioned as:
In the selection screen: I am entering Project ID, profit Center and Period(in MM/YYYY format).
Selection of all entries in table COSP for selected cost elements above, value type 1, version , all periods and for all selected WBS elements and all objects underneath.
From this, update table COFP with information from COSP with value type 62 and same period.
For updation of various fields the following information is being given.
How should we update COFP?
New entries per OBJNR/PERIO and HKONT are required via using the information from COSP:
COFP-MANDT              =          SY-MANDT
COFP-KOKRS              =          if COSP-OBJNR begins with PR
                                               Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PKOKR
                                                If COSP-OBJNR begins with NV
                                               Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-KOKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-KOKRS
COFP-BELNR               =          Check table NRIV, CLIENT = SY-MANDT, OBJECT = RK_BELEG,
SUBOBJECT = COFP-KOKRS, NRRANGENR = 05,
Add 1 to NRLEVEL and begin with 500000000
Use same BELNR for one update-run
COFP-BUZEI                =          1 + and 1 in next entry but same update-run
COFP-TWAER              =          COSP-TWAER
COFP-ZHLDT                =          always last day of month in field COFP-PERIO
COFP-GJAHR               =          COSP-GJAHR
COFP-PERIO               =          if entry in field WKG001 à PERIO = 001
                                               If entry in field WKG006 à PERIO = 006
COFP-WRTTP              =          62
COFP-VRGNG              =          FIPL
COFP-POSIT                =          Check table SKB1 where SAKNR = COSP-KSTAR and use SKB1-FIPOS
                                               for going to table FMCI-FIPOS and enter FMCI-POSIT
COFP-OBJNR               =          COSP-OBJNR
COFP-HKONT              =          COSP-KSTAR
COFP-WKGBTR           =          WKGXXX
COFP-WKGBTRO         =          -
COFP-WTGBTR            =          WTGXXX
COFP-WTGBTRO         =          -
COFP-WOGBTR           =          WTGXXX
COFP-WOGBTRO        =          -
COFP-BUKRS1            =          -
COFP-GJAHR1             =          -
COFP-BELNR1             =          -
COFP-BUZEI1              =          -
COFP-BUKRS2            =          -
COFP-GJAHR2             =          -
COFP-BELNR2             =          -
COFP-BUZEI2              =          -
COFP-EBELN               =          -
COFP-EBELP               =          -
COFP-ZEKKN               =          -
COFP-ETENRM            =          -
COFP-STUNR               =          -
COFP-LIFNR                =          -
COFP-KUNNR              =          -
COFP-GSBER              =          -
COFP-BUKRS              =          (nearly same as COFP-KOKRS!)
                                               if COSP-OBJNR begins with PR
                                               Check table PRPS with COSP-OBJNR = PRPS-OBJNR and enter PRPS-PBUKR
                                                If COSP-OBJNR begins with NV
                                               Check table AFVC with COSP-OBJNR = AFVC-OBJNR,
go to Table AFKO with AFVC-AUFPL,
go to table AUFK with AFKO-AUFNR and enter AUFK-BUKRS
If COSP-OBJNR begins with OR
Check table AUFK with COSP-OBJNR = AUFK-OBJNR
and enter AUFK-BUKRS
COFP-EINDT                =          -
COFP-SGTXT               =          -
COFP-GEBER              =          -
COFP-KURSF              =          -
COFP-KUFIX                =          -
COFP-GBETR              =          -
COFP-KURSR              =          -
COFP-KURSFIKRS       =          -
COFP-KZKRS               =          -
COFP-UMBKZ              =          -
COFP-KBLNR               =          -
COFP-KBLPOS            =          -
COFP-HI FIVOR            =          -
COFP-LO FIVOR          =          -
COFP-HI ACCOUNT      =          -
COFP-LO ACCOUNT     =          -
COFP-HI LIFNR            =          -
COFP-LO LIFNR           =          -
COFP-HI KUNNR          =          -
COFP-LO KUNNR         =          -
COFP-XDELETE           =          -
COFP-HI XOPVW         =          -
COFP-LO XOPVW        =          -
COFP-ZAEHK               =          -
COFP-CHAINBELNR     =          -
COFP-MWSKZ             =          -
COFP-LEDNR               =          -
COFP-BELTP               =          1
COFP-VERSN              =          0
COFP-OWAER             =          COSP-TWAER
COFP-CPUDT               =          SY-DATUM
COFP-CPUTM              =          SY-TIME
after doing updation, its again saying Selection of all entries in table COFP with value type 51 to 62, selected year, selected cost elements above and for all selected WBS elements and all objects underneath. Summarisation by period.
Now, can someone help me as how to proceed with the entire thing? An elaborate and illustrative answer would be highly appreciable.
If you require any other information....then get back to me ..asap.
Its bit urgent.
Thanks & Regards,
Ravi

Hi
update <table> from <i_tab>
for different conditions.
loop at i_cosp.
if cosp-mandt eq sy-mandt and cosp-objnr eq 'PR'.
Read table i_PRPS with key i_PRPS-OBJNR = i_COSP-OBJNR.
if sy-subrc eq 0.
update PRPS set PKOKR = ? where objnr = i_prpr-objnr.
endif.
endif.
similarly for all the conditions
Regards
Message was edited by: Harikishore Sreenivasulu

How to update one table from another

I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?

Comet wrote:
I am creating scripts in Oracle 10g. I have a table that has data corruption on three date fields.
I created a table with the following sql of all the affected rows:
CREATE TABLE LSU_INTER_FIX_DATE AS
select request_id,received_date,planned_start_date, actual_start_date
from lsu_inter2_requests_t
where received_date < to_date('01-JAN-1900')
OR planned_start_date < to_date('01-JAN-1900')
OR actual_start_date < to_date('01-JAN-1900')
I then repaired all of the rows with three data fixes
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET planned_start_date = TO_CHAR(planned_start_date,'YY-MON') ||'-'||(TO_CHAR(planned_start_date,'RRRR') + 2000)
where planned_start_date < to_date('01-JAN-1900')
UPDATE LSU_INTER_FIX_DATE
SET actual_start_date = TO_CHAR(actual_start_date,'YY-MON') ||'-'||(TO_CHAR(actual_start_date,'RRRR') + 2000)
where actual_start_date < to_date('01-JAN-1900')
I now want to update the original base table with the corrected data so I wrote the following SQL UPDATE command:
UPDATE lsu_inter2_requests_t aaa
SET aaa.received_date = bbb.received_date
FROM LSU_INTER_FIX_DATE bbb WHERE aaa.request_id = bbb.request_id
When I run this sql Oracle returns the error “ORA-00933 SQL command not properly ended.” How do I update multiple rows in one table from another table that share the same primary key?I am not convinced you have what you think you have
>
UPDATE LSU_INTER_FIX_DATE
SET received_date = TO_CHAR(received_date,'YY-MON') ||'-'||(TO_CHAR(received_date,'RRRR') + 2000)
where received_date < to_date('01-JAN-1900')
When you want to produce a DATE datatype when starting with a string,
you must use TO_DATE() on the SET line!
(TO_CHAR(received_date,'RRRR') + 2000)since when do you do add characters (from TO_CHAR) with a constant number (2000)?
You should NEVER EVER rely on implicit datatype conversion
Edited by: sb92075 on Jul 27, 2011 7:09 PM

How to update database table from Internal Table

hi experts,
Can anyone please assist me in inserting records to a database table from an Internal Table
whose structures are identical.
Thanks in Advance,
Sudhaa............

Hi Sudha,
Here are some example of update and insert:
UPDATE SFLIGHT SET PLANETYPE = 'A310'
PRICE = PRICE - '100.00'
WHERE CARRID = 'LH' AND CONNID = '0402'.
This example overwrites the contents of the PLANETYPE column with A310 and decreases the value of the PRICE column by 100 for each entry in SFLIGHT where CARRID contains u2018LHu2019 and CONNID contains u2018402u2019.
TABLES SPFLI.
DATA WA TYPE SPFLI.
MOVE 'AA' TO WA-CARRID.
MOVE '0064' TO WA-CONNID.
MOVE 'WASHINGTON' TO WA-CITYFROM.
UPDATE SPFLI FROM WA.
MOVE 'LH' TO SPFLI-CARRID.
MOVE '0017' TO SPFLI-CONNID.
MOVE 'BERLIN' TO SPFLI-CITYFROM.
UPDATE SPFLI.
CARRID and CONNID are the primary key fields of table SPFLI. All fields of those lines where the primary key fields are "AA" and "0064", or "LH" and "0017", are replaced by the values in the corresponding fields of the work area WA or the table work area SPFLI.
DATA: ITAB TYPE HASHED TABLE OF SPFLI
WITH UNIQUE KEY CARRID CONNID,
WA LIKE LINE OF ITAB.
WA-CARRID = 'UA'. WA-CONNID = '0011'. WA-CITYFROM = ...
INSERT WA INTO TABLE ITAB.
WA-CARRID = 'LH'. WA-CONNID = '1245'. WA-CITYFROM = ...
INSERT WA INTO TABLE ITAB.
WA-CARRID = 'AA'. WA-CONNID = '4574'. WA-CITYFROM = ...
INSERT WA INTO TABLE ITAB.
UPDATE SPFLI FROM TABLE ITAB.
This example fills a hashed table ITAB and then overwrites the lines in SPFLI that have the same primary key (CARRID and CONNID) as a line in the internal table.
Insert statement :
TABLES SPFLI.
DATA WA TYPE SPFLI.
WA-CARRID = 'LH'.
WA-CITYFROM = 'WASHINGTON'.
INSERT INTO SPFLI VALUES WA.
WA-CARRID = 'UA'.
WA-CITYFROM = 'LONDON'.
INSERT SPFLI FROM WA.
SPFLI-CARRID = 'LH'.
SPFLI-CITYFROM = 'BERLIN'.
INSERT SPFLI.
If the database table does not already contain a line with the same primary key as specified in the work area, the operation is completed successfully and SY-SUBRC is set to 0. Otherwise, the line is not inserted, and SY-SUBRC is set to 4.
Regards,
Premraj kaushik

Is it possible to update internal table from database table

Hello All:
I know how to update database table from internal table in one shot (batch) but is the reverse possible? Can I update some fields in an internal table from a database table in one shot (without looping) because my internal table is huge? Could you please provide me any ideas how to acheive something like this? Thanks in advance and answers will be rewarded.
thanks.
Mithun

Hello my friend,
You can do it MAYBE , i think you can reverse the update doing a ROLLBACK, but only after you update....not after the program finishes..
To update some fields at once use:
UPDATE DBTABLE FROM TABLE IT_TABLE
Hope this helps!!
Gabriel

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

How to update duplicate row from table

Hi,
how to update duplicate row from table?
First to find duplicate row then update duplicate row with no to that duplicate row in oracle.
can you give me suggestion on it?
Thanks in advance.
your early response is appreciated...

In order to find a duplicate row, see:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:1224636375004
(or search this forum, your question has been asked before)
In order to update it, just create and use an Oracle sequence, have it start and increment at a value that doesn't exist in your table.
If that doesn't get you going, post some CREATE TABLE + INSERT INTO statements, and the results you want from them, in other words: a complete testcase.

How to update PAYMENT tables manually from backend after invoice creation.

Hi,
I am Financial beginner. how to update payment details from invoices using backend in P2P.
Thanks and Regards,
Srikanth

I have created a invoice and updating payment details.
I just need small information regarding payaments.
After invoice we create payments using validate, pay in full.
But What actually happens when we do validate and pay in full.
and what are the fields and tables effected in this process.FAQ: Common Tracing Techniques in Oracle E-Business Applications 11i and R12 [ID 296559.1]
R12 Docs
http://docs.oracle.com/cd/E18727_01/index.htm
eTRM
http://etrm.oracle.com/
Thanks,
Hussein

How can i import tables from a different schema into the existing relational model... to add these tables in the existing model? plss help

how can i import tables from a different schema into the existing relational model... to add these tables in the existing relational/logical model? plss help
note; I already have the relational/logical model ready from one schema... and I need to add few more tables to this relational/logical model
can I import the same way as I did previously??
but even if I do the same how can I add it in the model?? as the logical model has already been engineered..
please help ...
thanks

Hi,
Before you start, you should probably take a backup copy of your design (the .dmd file and associated folder), in case the update does not work out as you had hoped.
You need to use Import > Data Dictionary again, to start the Data Dictionary Import Wizard.
In step 1 use a suitable database connection that can access the relevant table definitions.
In step 2 select the schema (or schemas) to import. The "Import to" field in the lower left part of the main panel allows you to select which existing Relational Model to import into (or to specify that a new Relational Model is to be created).
In step 3 select the tables to import. (Note that if there are an Foreign Key constraints between the new tables and any tables you had previously imported, you should also include the previous tables, otherwise the Foreign Key constraints will not be imported.)
After the import itself has completed, the "Compare Models" dialog is displayed. This shows the differences between the model being imported and the previous state of the model, and allows you to select which changes are to be applied.
Just selecting the Merge button should apply all the additions and changes in the new import.
Having updated your Relational Model, you can then update your Logical Model. To do this you repeat the "Engineer to Logical Model". This displays the "Engineer to Logical Model" dialog, which shows the changes which will be applied to the Logical Model, and allows you to select which changes are to be applied.
Just selecting the Engineer button should apply all the additions and changes.
I hope this helps you achieve what you want.
David

How to update Spry-table and present the updated table in a div element?

Hello!
I am using a very interesting AJAX-framework called Spry when designing a web page. Here the web page is: Link.
I need some help.
Every time a new project or shift is added, the changes are written to an xml-file. When the page is reloaded, Spry reads data from xml-files.
This is caused by this code:
dsProjects = new Spry.Data.XMLDataSet("timetable/projects.xml", "projects/project");
dsShifts = new Spry.Data.XMLDataSet("timetable/{dsProjects::url}", "project/shift"); //look inside projects.xml and //extrac xml-file. url
dsName = new Spry.Data.XMLDataSet("timetable/{dsProjects::url}", "project");
I call this function that I have written: loadProjectsIntoDivElement ().
This function does the following: [See attached code.]
It iterates through the Spry-datastructure and puts the data in a table inside of the div-element called 'projectsList'.
Now, when I add a new project, I want it to be inserted into the Spry-datastructure and then cause the new data to be written into the div element called 'Specials_DIV'.
I have found out how to update a Spry-datastructure (e.g. dsProjects above), but I don't know how to update the table containing the data without refreshing the page. This should be done using Spry.
Some code:
1:
2:
3:
function loadProjectsIntoDivElement () {
$('#projectsList').html('');
$('#projectsList').append('<table id="Specials_Table"><tr><th spry:sort="id">ID</th><th spry:sort="NAME">Name </th><th spry:sort="hoursestimated">Nr. of hours estimated</th><th spry:sort="hoursworked">Nr. of hours worked</th><th spry:sort="costperhour">Cost per hour.</th></tr>{function::init_hours}<tr spry:repeat="dsProjects" onclick="chooseProject({ds_RowID})"><td>{id}</td><td>{NAME}</td><td>{hoursestimated}</td><td>{hoursworked}</td><td>{costperhour}</td></tr></table><br/>{function::get_hours}<br/>');
I have tried to accomplish this in various ways but I don't succeed.
I want to do it without refreshing the page.
Update: I found some code here that I will try: Link
Thanks in advance!
Anders Branderud
My blog

Hello!
Thanks!
I don't succeed with the implementation in any browser.
I have found a way to it, but I would like a way that updates the data quicker and without reloading all of the page. After all, I am only adding one row on the end of the data structure, so there should be no need to read in all data again.
Now I do it like this:
When a project is added, do this:
1. Store a new row in the project file through a php script.
2. When the post-call to the php-file returns, do refresh of the whole page.
Then the newest version of the xml file will be read in.
However, I don't want to read the data from a xml file each time that a new project is created.
I know how to add the new data to a Spry-datastructure [in my code 'dsProjects'], but I don't know how to display the updated data without reloading the whole page.
I have tried some various ways to do it, but haven't succeded.
Thanks!
Anders Branderud

Pass internal table from program to another program

hi,
how do i pass an internal table from program to another program, then read it.
tnx,
laure

Export the selected rows to the next program
EXPORT final TO MEMORY ID 'ABC'.
CALL TRANSACTION 'XXX'.
XXX is the tcode for the other program where u want to import the values.
In the second program
INITIALIZATION.
IMPORT the internal table from the first program
IMPORT final FROM MEMORY ID 'ABC'.
Dont refesh the internal table final.

How to update a table containing BLOB?

Hi,
I'm trying to update two columns in a table.
one is NUMBER and the other is BLOB
Is there a way to do so in OCCI in a single operation ?
the table looks like this:
CREATE TABLE ACCUMULATORS
(TARGET_SUBS NUMBER(9),
ITERATOR NUMBER(9),
NUMERATOR NUMBER(9),
LARGE_DATA BLOB,
PRIMARY KEY(TARGET_SUBS,ITERATOR));
and the query is something like:
UPDATE ACCUMULATORS SET NUMERATOR = :x1 , LARGE_DATA = :x2 WHERE (TARGET_SUBS = :x3) AND (ITERATOR = :x4);
Thanks,
Menachem

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

How to update database table !!!

hi all,
Please advice how to update database table with certain cndition needs to be checked.
Please consider below scenario.
have used enqueu and dequeue function to lock entries and also i have used BAPI so considering that return parameter . i want to update table
/tdk/st0027.
1. I want to update database table
2. there are certain condition needs to be checked like ,
   loop at it_final into wa_final.
th_return-type = 'S'.
           if th_final-vbeln = /tdk/st0027-vbeln and
              th_final-posnr = /tdk/st0027-posnr and
              th_final-etenr = /tdk/st0027-sdslno.
above condition which i need to check .and need to append below system fields need to be appended in table.
          th_final-prstsind = '20'.
          th_final-chgdate = g_date.
          th_final-chgtime = g_uzeit.
          th_final-chgprog = g_cprog.
          th_final-chguser = g_uname.
          append th_final to td_final.
          update /tdk/st0027 FROM th_final.
          endif.
endloop.
but i am getting error saying that "The type od database table and work area (TH_FINAL) are not unicode convertible"?
I am not able to understandwhat would be the solution for this ?
Thanks and regards,
Prasad K. NAralkar

The error occurs in the UPDATE statement included in the code. In this statement it is seen that there is a mismatch of structure defined for the DDIC table /tdk/st0027 and that of your work area th_final.
try to create a structure w.r.t the DDIC table.
Eg: DATA: wa_temp TYPE /tdk/st0027.
MOVE-CORRESPONDING th_final TO wa_temp.
Then try to UPDATE using the temporary work area i.e wa_temp which has structure similar to that of the database table.

How to update two tables with trigger

Hi:
how to update two tables with trigger ?
I have two tables :
(1)ASIA
MI number;
(2)ASIA_P
ID number;
When I insert a new value into the asia.MI ,I also can
insert the same value into the asia_p.id field.
I have write a trigger as follows but it does't work.
create or replace trigger MI_TRG
before insert on asia
for each row
declare
seq number;
begin
select MI_SEQ.Nextval into seq from dual;
:new.MI:=seq;
insert into ASIA_PRO(MI_ID)
values
(seq);
end MI_TRG;
How to realize it ?
thanks
zzm

Why do you say it does not work?

How to update the table available in BADI method

Hi Friends,
I have to implement one badi ME_REQ_POSTED for purchase requistion, in this badi I have to read first line item and do
some check...if that check is true i need to update subsequent line item (line 20, 30, 40 or so) with purchase group and MRP controller.
In this BADI i have method POSTED, in this method parameter IM_EBAN is a table which i need to modify with my different
values for purchase group and MRP controller.
Kindly let me know how to update this table, so the changes can be reflected in purchase requistion.
Since when I tried to directly modify the table in a loop, system throw one error stating IM_EBAN can not be modified.
kindly help.
pradeep

hi
I have implemented this exit but it does not stop at it while saving Purchase requistion. But my previous BADI stops at it when saving.
Kindly guide.

How to *Update T710S* table from Program or any FM or BAPI or Any BDC

Similar Messages

Maybe you are looking for

How to Update T710S table from Program or any FM or BAPI or Any BDC