How to upgrade OpenSSH without macport or homebrew

I would like to upgrade openssh/openssl to their latest releases via the terminal. All I can find is how to do it with macport or homebrew - I don't want to use these.
http://heartbleed.com/
Thanks!
Will

OS X isn't like Linux. If there is a security patch that needs to be installed, you don't have to do it yourself. Apple takes care of it for you. In this case, Apple had stopped using the affected library some time ago. So updating the library won't help you very much because very little native Mac software would even be that library.

Similar Messages

How to Upgrade RPM without checking dependicies.

Hi
I have some RPM installed on RHEL4. for installing i need to upgrade some RPMs. I am using the command RPM -Uvh <RPM name> to upgrade RPMs. Some time i get error that
[root@R11 RPM]# rpm -Uvhf gcc-3.4.6-3.i386.rpm
warning: gcc-3.4.6-3.i386.rpm: V3 DSA signature: NOKEY, key ID 0c98ff9d
error: Failed dependencies:
cpp = 3.4.6-3 is needed by gcc-3.4.6-3.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-c++-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-g77-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-gnat-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-java-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-objc-3.4.3-9.EL4.i386
[root@R11 RPM]#
Kindly inform me how to upgrade RPMs' without checking the dependencies.
Thanks
Krishna

Package dependencies exist to stop you from jeopardizing proper functions of your system. There is probably a good reason for this, but if you want to go ahead regardless then try the --nodeps parameter. The error is telling you that you need to install cpp-3.4.6-3.i386.rpm.

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?

Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR

How to upgrade to 4.4 without micro usb cable,

How to upgrade to 4.4 without micro usb cable ?
My ATV tell me 4.3 is the last version of the OS.

Kim Hannemann wrote:
My point is that Apple should have provided a micro usb cable with the unit if we are expected to update with one. Previous updates have worked over wifi; this one should also.
I absolutely agree with you about the cable - it would cost them pennies to provide one.
I have several from external USB drives but not everyone does.
If being acble to restore over USB is an expected get out of jail solution for problematic AppleTVs one should have been included.
I wonder if the new iPhone comes without a cable to connect to iTunes now (I've had it a week and not opened the box!), or maybe there's no SIM tool anymore!
AC

How to run Pre-Upgrade Check without upgrading License Server

Hi
How can I run the 8.8 Pre-Upgrade Check without upgrading to the 8.8 license server?
The Wizard forces me to upgrade it and if I upgrade it, the current 2007 does not run anymore. I want to check my DB's with the Check before upgrading any components and 2007 needs to stay alive.
Thanks
Franz

Hi Franz,
I would suggest you to check your DBu2019s in your test environment. Please take a backup of all DBu2019s from your live environment and restore them in your test environment once you will have enough free space.
Please always test the database upgrade in the test environment before doing it in the production environment.
For more information regarding Business One installation and upgrades on 8.8 version please refer to the Administrator's Guide 8.8, which can be found on the Documentation Resource Centre on the Portal. http://service.sap.com/smb/sbo/documentation -> Documentation Resource Center for Release 8.8
See chapters: 3.Installing SAP Business One and 5.Upgrading SAP Business One
Regards,
Ladislav Meszaros
SAP Business One Forum Team

HT5002 I used Inkscape on Linux before moved to Mac. Now I am trying to install it using MacPorts, but libpixman has some problems that has been reported out there. Does any one know how to fix it without the need to use other way than MacPorts?

I used Inkscape on Linux before moved to Mac. Now I am trying to install it
using MacPorts, but libpixman has some problems that has been reported out there.
Does any one know how to fix it without the need to use other way than MacPorts?

Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao.

How to upgrade Robohelp X5 files to Robohelp 7 without broken links ?

How to upgrade Robohelp X5 files to Robohelp 7 without broken links ? And also i need proper procedure for migrating Robohelp X5 to Robohelp 7 that does not affect the system performance due to .cpd file.

Upgrading from 5 to 7 should be as simple as opening the project and I don't recall it giving any broken link problems. Is your project on your local drive rather than a network drive? Is source control involved?
What's the basis for thinking the CPD will cause performance issues?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to upgrade the hard disk of the nomad jukebox

I read the FAQ of nomad on nomadness.net, I wanna know how to upgrade the hard disk of old nomad jukebox with a bigger one?
I also read a artical on tom's hardware about this,
http://www7.tomshardware.com/mobile/20000/mp3-3.html
but he gave a link
http://www.kuren.org/jukebox
that is not available. He mentioned that it need to clone the fist 65536 sectors from the old disk to the new one, but I have not the old hard disk( I bought a second hand nomad jukebox without the original hard disk). How should I do?
Does someone have the image file of the fist 65536 sectors from the old disk?
Thank you!

That was the old method before Creative published their Bootcode Flasher software.
Follow the instructions here:
http://www.nomadness.net/modules.php...ticle&artid=24
All files mentioned are available somewhere on Nomadness. Also check out the sticky thread in their JB section of the forum as it lists what hard dri'ves will work in a JB and which ones won't. I hope you haven't already bought your upgrade hard dri've.
I used the above method without any problems and now have a 20GB JB.
PB

How to restore iPad without updating?

How to restore iPad without updating? Why this stupid apple didn't put two buttons for restoring and updating iDevice.. they should include "RESTORE ONLY"

Performing a restore from a backup does not upgrade the ios.

How to upgrade from solaris 8 to solaris 10

Hi,
Currently our server is installed with OS 8. I want to upgrade it to OS 10 as some application software is no more support OS 8. Can you advise on how to upgrade to OS 10 without affecting current server settings and configrations.
Thanks
vlsi

>
upgrade to OS 10 without affecting current server
settings and configrations.Generally speaking, Solaris installs will offer you the opportunity to do an "upgrade" install that will preserve your existing config.
Practically speaking, however, you need to have enough disk space to do the upgrade, and Solaris 10's full install is much larger than Solaris 8's.
The install can also offer to do a data backup for you if it finds it has to resize your disk partitions, so you should be prepared with a tape drive (or available extra disk or NFS filesystem) for temporary storage of the backup.
Even with all this, I would still recommend you make a backup of your system before starting.

How to Upgrade (legacy setup) 5508 wlc in HA

How to Upgrade 5508 wlc in HA (both the WLC with permanant AP license only, i.e, without HA license).
As per
http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/High_Availability_DG.pdf
Both the WLCs have a valid AP Count license
• The CLI should be used to configure one WLC as the Standby WLC (as mentioned in the
configuration section) provided it satisfies the requirement of minimum permanent license count.
This condition is only valid for the 5500 WLC, where a minimum of 50 AP Permanent licenses are
needed to be converted to Standby. There is no restriction for other WLCs such as the WiSM2, 7500,
and 8500.
• AP-count license information will be pushed from Active to Standby.
• In the event of a switchover, the new Active WLC will operate with the license count of the previous
Active WLC and will start the 90-day countdown.
• The WLC configured as Secondary will not use its own installed license, and only the inherited
license from the active will be utilized.
• After 90-days, it starts nagging messages. It will not disconnect connected APs.
• With the new WLC coming up, HA SKU at the time of paring will get the AP Count:
– If the new WLC has a higher AP count than the previous, the 90-day counter is reset.
– If the new WLC has a lower AP count than the previous, the 90-day counter is not reset.
– After switchover to a lower AP count, the WLC offset timer will continue and nagging messages
will be displayed after time expiry.
My query is:
How can we upgrade the WLC version in this scenatio (where both the WLC have only permanent
AP License and not the HA license), Is it the same as done with HA controller or some othe procedure?
Pls comment.

Thanks Freerk for the comments,
But my query is, What would be the procedure for image upgradation after configuring HA between both the controllers (Primary-Secondary).
Will it be same as with the Primary-HA controller, or do i've to upgrade them individually and
re-configure HA again.

How to upgrade 5.0.1 executable to run on Windows XP?

I need to upgrade the OS on a standalone DAQ system to Windows XP.
This system is controlled by an executable created by LabVIEW 5.01 running on Windows 98.
I am not sure if we have the source code (i.e. LV vi's).
Can any one please tell me how to upgrade the system so that the LabVIEW 5.01 executable can run on Windows XP?
Thank you very much for your help.

I will try after backing up the entire system before trying it.
Another related question, if I can find the source code in LV 5.0.1, will I be able to upgrade it to the latest LV version if I buy the LV package, or do I expect problems?
I guess if it were me I'd just get a new compatible hard drive for the system (since they are so inexpensive these days) and swap it for the one with Win98. Install WinXP to the new drive and be sure that you are happy with the performance of the old machine under WinXP before proceeding. Then you can temporarily add the Win98 drive as an additional disk to the WinXP system and copy the files you need off of it and then set it aside again just in case you are not able to get the LabVIEW working. Swapping disk drives is MUCH faster and usually safer then creating and restoring backups. An alternate similar path is to add the new drive to the Win98 system and, using software like Norton Ghost, clone the Win98 system/disk to the new disk then pull out the old Win98 disk, boot off the cloned Win98 disk and upgrade that disk to WinXP. That way the old applications would exist under the new system and you may be able to run them without any further fuss.
The current version of LabVIEW should be able to read the old VI files. You could always download the demo and try it. As far as having problems, many people in general are not happy with one aspect or another of LabVIEW v8.0 and the patch to 8.0.1 certainly does not fix all the problems but if all you are doing is upgrading old code to run again under 8 then you'll probably be OK.

I need Numbers 3.0 to open icloud docs; how can I download without losing Numbers 2.3?

I need Numbers 3.0 to open icloud docs; how can I download without losing Numbers 2.3?

VR,
Your Numbers 2 app will still be functional if you download the new Numbers 3 app. If you purchased Numbers 2 prior to the Mac App Store, your iWork '09 apps are in Applications > iWork. If you purchased your Numbers 2 app from the Mac App Store, Numbers 2 will be in Applications, no sub folder. But, if you "Upgrade" to Numbers 3, Numbers 2 will be moved into an iWork subfolder within Applications. You will be able to manually choose which one you want to use, but Numbers 3 will be the default.
Jerry

How to upgrade from trial connect 9 version with elearning features?

Please advise how i upgrade from my current trial version of Connect 9 to the full version with elearning features.
I see that the public pricing is without the elearning features, so for me this is no good as i need to host courses. The email address of [email protected] is invalid and bounces back and the phone line helpers are unable to provide information to help.
I cannot find costings or online download options anywhere
Please help as a matter of urgency
Thanks

Contact me off-forum and I'll get you all the info you need.
Jorma Jennings
jorma[at]realeyesconnect.com
Not sure why the adobe email bounces, but they probably can't get you anything more than a contact for a reseller anyhow.

How to upgrade Jdeveloper 11.1.1.4.0 to latest version

How to upgrade Jdeveloper 11.1.1.4.0 to latest version without installing a new copy of Jdeveloper.
I want to develop mobile applications in ADF but they are not present in 11.1.1.4 version.

Hi,
building ADF mobile applications requires JDeveloper 11.1.2.3 or (better) 11.1.2.4. However, you don't need to upgrade your existing application as ADF mobile does not leverage e.g. ADF BC. Instead it accesses data through services. So just install 11.1.2.4 of JDeveloper and build your mobile applications
Frank

How to upgrade OpenSSH without macport or homebrew

Similar Messages

Maybe you are looking for