How to use a Cluster ADdress?

          Hi!
          I created a cluster with two servers. The cluster service starts up successful.
          Everything is working. The only problem that i have is to configure a working
          cluster address. I want only one address to be visible for the clients. Not the
          all addresses of each clustermember. How can i do that. I added a address into
          the Cluster Address field but i didn´t work. Can anyone help me? Thanks
          Chris

Per the following link:
          http://e-docs.bea.com/wls/docs61/cluster/setup.html
          BEA recommends that your cluster address be a DNS entry with multiple
          IPs. Your network administrator should be able to provide one for you.
          Sincerely,
          Charlie Therit
          Developer Relations Engineer
          BEA Support
          Christian Graf wrote:
          >Hi!
          >I created a cluster with two servers. The cluster service starts up successful.
          >Everything is working. The only problem that i have is to configure a working
          >cluster address. I want only one address to be visible for the clients. Not the
          >all addresses of each clustermember. How can i do that. I added a address into
          >the Cluster Address field but i didn´t work. Can anyone help me? Thanks
          >Chris
          >
          >

Similar Messages

Getting initial context using a cluster address

I am having trouble getting initial context using a cluster address. My cluster
has two WL 8.1 servers at localhost:8001 and localhost:9001. I set the hashtable
to get the initial context as follows:
env.put(InitialContext.PROVIDER_URL, "t3://localhost:8001,t3://localhost:9001");
This gives me the following exception:
Could not create JNDI InitialContext: javax.naming.ConfigurationException
[Root exception is java.net.MalformedURLException: port expected: t3://cammnbhati:8001,t3://cammnbhati:9001]
Any idea whey this is not working? If I set only one of the addresses then there
is no error. For example, the following works just fine:
env.put(InitialContext.PROVIDER_URL, "t3://localhost:8001");
Thanks.

try t3://localhost:8001,localhost:9001 as url
hth
sree
"Naresh Bhatia" <[email protected]> wrote in message
news:4009cfdf$[email protected]..
>
I am having trouble getting initial context using a cluster address. Mycluster
has two WL 8.1 servers at localhost:8001 and localhost:9001. I set thehashtable
to get the initial context as follows:
env.put(InitialContext.PROVIDER_URL,"t3://localhost:8001,t3://localhost:9001");
>
This gives me the following exception:
Could not create JNDI InitialContext:javax.naming.ConfigurationException
[Root exception is java.net.MalformedURLException: port expected:
t3://cammnbhati:8001,t3://cammnbhati:9001
Any idea whey this is not working? If I set only one of the addresses thenthere
is no error. For example, the following works just fine:
env.put(InitialContext.PROVIDER_URL, "t3://localhost:8001");
Thanks.

I would like someone to tell me how to use the dstp address parameter(url) in the datasocket connections.What to write in there, destination/source url.

What do i do if i right to a datasocket..Do i have to make a special file on my server, How do i create a datasocket server.?? Do i use the same "address" to read a datasocket?

The URL is the address of the DataSocket server. The server program is a stand-alone program that handles connections and broadcasts data. You create a server by running the program that comes with LabVIEW. You publish to (write) and subscribe from (read) the server and both would use the same address. Normally the data is not file based but DataSocket does support file reads by specifying file or ftp instead of dstp in the URL. The server can be running on the same computer as a publisher/subscriber or on a different computer. NI is now offering a class called LabVIEW Networked Measurements that covers DataSocket. I strongly recomend it.

How to use new cluster 'cl' commands from c/c++ code

Hi All
I need to invoke cluster commands from c/c++ code and parse the output to retrieve neccessary fields e.g status to be used in program.
e.g
#cluster status
I need to capture output and use it in c/c++ code.
Does any one have tried to use new cluster 'cl' commands from c/c++ code??
Thanks
Pandit

The output of the cl* commands is for human consumption and as such (as most administrative commands) the output is not considered stable, so it could change with a Patch, etc.
Instead you should use the cluster api to retreive the information you need.
The Sun Cluster Data Services Developer's Guide for Solaris OS (http://docs.sun.com/app/docs/doc/819-2972?a=expand) describes the various possibilities, including the C API.
Read especially http://docs.sun.com/app/docs/doc/819-2972/6n57ngitf?a=view for more details as which functions are available via the libdsdev. Each function has a specific manpage outlining the lib and includes needed as well es which information it offers.
In your example, you can use scha_resource_get() (3HA) in order to retrieve the status of a specific resource (http://docs.sun.com/app/docs/doc/819-3055/6n5a6lhnl?a=view).
Greets
Thorsten

How to use different mail address in "from" and "user" property?

I'd like to use the user enter mail address as the "from" property and use my mail account to send it, but I got error: com.sun.mail.smtp.SMTPSendFailedException: 553 You are not authorized to send mail, authentication is required when set different mail address in "from" and "user" property, how to resolve this problem?

Basically that's a bad idea. Suppose you used your server to send messages that claimed to come from "[email protected]"? Naturally enough people have tried that, either as a joke or as an attempt at fraud, so that servers will check to see if the message is coming from the server it claims to be coming from. And if it isn't -- as in that example -- it will consider it a forgery. Best case (for you) is that the server will flag it as spam or junk. Worst case is that your server will be blacklisted and other servers will ignore it.

How to use 2 email addresses with Digital editions

How do I get Adobe Digital Editions to recognize both my e-mail addresses, since I use both for mye-reader. ADE only recognizes ebooks from email addressed used when setting up ADE

Kobel,
Both cameras are being triggered at the same time, and both boards are aquiering the image at the same time. The problem you are seeing is related to copying the correct image.
The IMAQ driver is not currently multithreaded, therefore your second copy opperation can not execute until your first one is done. The trouble is that you have the immediate terminal set to false which forces the copy to wait for the next available image before returning.
Since the second copy does not execute until the first one is complete, it will consider the frame that just passed as old and wait for the next available frame.
The quick solution is to change the immediate terminal to true on both copies. The best solution depends on your entie application. You may want to re
ad this application note on Ring Aquisitions for ideas.
Regards,
Amaury Rolin
NI Applications Engineer

How to use same email address on iCloud across different devices?

I am setting up my iCloud ID, which I already have on my MacBook Air and iPhone on my new iPad mini. When I turn on iCloud, it asks me to set up a new email address at @icloud.com, which I don't want it to do. Instead, I want to use the @me.com email address I already have.
How do I turn on Mail on my iPad mini and get it to pick up the email address I already have?

Hey pdenlinger,
It sounds like you are signed into a different iCloud account on the iPad mini, in my experience that would be the only cause. Be sure to double check what Apple ID you are signed into for iCloud, we'll want it to be your @me.com address.
Creating an iCloud account: Frequently Asked Questions
http://support.apple.com/kb/HT4436
When you setup your iOS device, by default the same Apple ID is used for iCloud services and store purchases (iTunes, App Store, iBookstore). However, if you want to use a separate Apple ID, you can set up the account you would like to use in Store Settings.
For more information on @me.com and @icloud.com, refer to this article:
iCloud: About your icloud.com, me.com, and mac.com email addresses
http://support.apple.com/kb/HT2623
Thanks,
Matt M.

How to use .mac email address after upgrade to iCloud.

HI
Just wondering the following.
I have an old mac.com email address.. Can I still use it in any capacity? What I am thinking is to be able to have an email sent to my mac.com email address forwarded to my gmail account. Is this possible and if so how?
Thanks and I look forward to your reply.
...Bruce

Glenn Leblanc wrote:
I'm not exactly sure what you're trying to do. Do you want the .mac address forwarded to gmail and not the .me address?
If you use iCloud in Mail, all iCloud mail will include the main address and all aliases. They show in the same account, but with the different addresses.
If you use the main forwarding address in the general preferences of Mail at the iCloud site, then all messages to all iCloud addresses will forward to gmail.
If you only want to forward one of the addresses, go to the rules tab and create a rule to forward the .mac address to gmail.
You said: I am using gmail on my iphone/ipad so I do not need to sync my mail.
     Do you not want the .mac or .me account on your phone and iPad?
You said: What I am trying to achieve here is just to have a mac.com account. My concern is I do not want to get it confused with the me.com address. Given that is it possible to have a mac.com email account that will work?
Where are you using the .me account and what for? How do you want to separate them so you don't get confused? If you only want a .mac account, what happened to gmail?
I'm sorry. It appears there is a minor translation barrier. I am not understanding what you need to accomplish and I'm getting confused.
Maybe you could explain as simple as possible all what you want to show in Mail on the computer, iPhone, and iPad and what you want to sync together.
Glenn I am sorry for the confusion. The joys of email.
I'm not exactly sure what you're trying to do. Do you want the .mac address forwarded to gmail and not the .me address?
     Yes I want to forward the .mac address to my gmail account The reason I have the .me address is because Apple forced this on me when I signed up for the icloud when it first came out. They would not let me use another account. I would have prefered the .mac account but as I said I had no choice.
You said: I am using gmail on my iphone/ipad so I do not need to sync my mail.
     Do you not want the .mac or .me account on your phone and iPad?
    I do not want either account on my iPhone or iPad for email. I use my gmail account for my email. I have gmail defined as an exchange account on the iPhone/iPad in order to push email to my devices. I just want to have a .mac email address that people can send emails to. My intention is to forward the .mac emails to my gmail.
So I guess my problem boils down to how I can have the mac.com address (which is defined on Apple) forward any emails to my gmail account.
I hope I am making this clearer for you to understand. Maybe I am trying to do something that is not possible? Maybe I am making this more complicated than it really i?. The concept is simple. Apple just makes it difficult to do it.
I look forward to hearing back from you.

How to use second email address as primary email address without creating NEW ID?

Hello Everyone,
After TWO long years I am back in Apple Family.. I am loving it.
I tried Android Galaxy S3 for TWO long years and I feel really good to come back in Apple Family again.
I don't think so I or anyone from my family will ever go to Android.
I have a quick question for all the Apple Family members.
I have an Apple ID on abc@old_domain.com this ID I am no longer using it and I want to use my new ID which is abc@new_domain.com.
But I DO NOT want to create NEW Apple ID. Because I want to make use of my PAID apps which I bought with abc@old_domain.com APPLE ID two years back.
How can I do that ?
Thanks for your help in advance.
Hemant

As the long as that email address isn't currently being used as the primary email address on an account (and it's not an alternate or rescue email address on the old account that you want to use it on), then you should be able to put it as your primary email address by logging into the old iTunes account via the Store > View Account menu option on your computer's iTunes, or by logging into the account via http://appleid.apple.com
Changing your primary email address : Change your Apple ID.
Changing the primary email address on an account should not affect any of the account's purchases, as long as the apps are still in the store (and you haven't changed countries since buying them) then you should be able to redownload the via the Purchased link under Quick Links on the right-hand side of the iTunes store homepage on your computer's iTunes, and the Purchased tab in the App Store app on an iOS device.

How to use a ip address for pop & smtp server names when creating a new account

My xp PC is on a lan behind a Freebsd os [IE. flavor of unix] which is not running a dns server. The only way to reach it is by ip address. I have configured the account with a ip address for pop & smtp. When I create and sent a email, Thunderbird shows a window saying it trying to connect and after 10 seconds it goes away with out showing the status window. There is no email in the sent folder. Is it possible to do this ???? I can accomplish this using ms/outlook so I know it is possible.

I haven't tried this in years, but could you give this server a name and enter that into TB
Then in C:\Windows\System32\drivers\etc\hosts you add that name and ip

How to use different mail address in icloud mail

Hi,
I'm facing a dilemma : switch from Gmail to iCloud
I would like to gather my cloud account and i'm quite satisfied of apple icloud, but there still is a last barrier to me :
multi-mail accounts !
I didn't find any solution in order to be able to send mails from iCloud with an alias as @gmail.com, @live.com or any other mails.
I totally can forward all my mails to my icloud address (im already doing it with Gmail) but i NEED to be able to answer my mails with the correct alias (for work as much as for private life) just as i currently do with google mail service linking my alias smtp's.
This is the last thing that makes the swap from Google to iCloud impossible for me, but maybe there is a solution ....
Thanks,

You cannot send emails via iCloud from non-iCloud email addresses. There is no solution to that using the iCloud service.
There are some convoluted workarounds that involve setting up multiple email accounts with different outgoing mail servers, but they do not allow you to send non-iCloud Mail via iCloud.

HT201342 How to use another email address with iPad

How do I use another email server name other iCloud

rdepom wrote:
Is there any way round this
I'm afraid not
or any way to put pressure on Apple to add this basic feature???
http://www.apple.com/feedback/icloud.html - but I don't think it's very likely they'll change it.

How to use Reserved IP Addresses

Where in the Azure Dashboard do I request a Reserved IP Addresses for my Cloud Services?
Jacob

Hi,
As far as I know, we can't reserve cloud services's IP address in azure portal.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to define cluster address

          My network administrator doesn't undestand how to configure dns cluster address
          that map two addresses (the ones of servers in the cluster).
          Can anyone help?
          Thank you


Lucia Giraldo wrote:
          > My network administrator doesn't undestand how to configure dns cluster address
          > that map two addresses (the ones of servers in the cluster).
          > Can anyone help?
          > Thank you
          http://www.weblogic.com/docs50/cluster/setup.html
          http://www.oreilly.com/catalog/dns3/

When I login on my When I sign in to a site on my ipad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

When I sign in to a site on my iPad using my email address as ID a short cut of my email address comes up. How can I get rid of it?

You can edit keyboard shortcuts in Settings>General>Keyboard>Shortcuts>Edit.

How to use a Cluster ADdress?

Similar Messages

Maybe you are looking for