How to use a provider code without installing its package?

Hi,
I got a problem here.
I found a security provider package named "cryptix" is what I need in my own software.
My question is how to distribute it with my software?
my app is a aaplet and I couldn't suppose all user machine have been installed this package before try my app.
It is a simple question, I know.
Thanks you all.
greg

You are writing an Applet right? If so you have a jar file that is downloaded when the applet runs that contains the applet code. You simply need to add an archive tag to your applet's HTML file which includes the cryptix jar. If you are using the Plug-in then you can set that jar to cache.
The problem will be registering the cryptix provider with the security manager. I am not sure about this but I would imagine calling Security.addProvider() would throw an exception while running in an Applet sandbox.
maybe I'm wrong but I would check before you get to far!

Similar Messages

How to use only for scanning without installing printer cartridge

I have an old all in one and want to use it only for scanning without installing printer cartridge. I get the red signal of no i9nk and "E" msg in copy no button. If I give scanning request from HP solutions centre I get an error message " An error occured while communicating with thescanning device"

Hello , Welcome to the HP Community! I understand that you are trying to scan on your HP Deskjet F380 All-in-One Printer without having cartridges installed. I'd like to shed a little light on this for you. Some HP printers are able to scan without ink installed, but most do not. If the cartridge lights on the product are blinking and there is an "E" in the copies window, then the printer is in an error state and will not function until cartridges are installed. If the printer is in an error state, that would describe the message you are getting that "An error occured while communicating with the scanning device", as the printer would not respond when prompted by the software. You can check the blinking light combination on the printer and follow the steps in this document to resolve the error state and continue using the device.Blinking Lights on the HP Deskjet F300 All-in-One Printer Series Hope this helps!Thanks so much for posting.

How to use PDF417 Bar Code in Oracle Reports 6i

How to Use PDF417 Bar Code in Oracle 6i. One of my clients has a requirement that Customer Name and Address to be converted into PDF417.
Any help greatly appreciated.
Thanks,
PN

You will need to add this font to the system and Reports configuration files.
For adding font to the system, refer to your system specific guidelines for installing new fonts.
After you have installed this font on the system, you should be able to see the font in Reports builder font picker dropdown box. or with unix 'xlsfonts' command
For adding this font to the Reports application.
1. Modify the printer definition file ( you can get this info from uiprint.txt file for the .ppd or .hpd file used )
if the printer defination file is .ppd then look for "*Font Information" section and add the new font name there
like *Font <new_font_name> Standard '(00.1001)" Standard ROM
If hpd add the new font tfm file as
FONT= new_font_name
/tfm=new_font_tfm file.tfm
2. Copy the AFM or TFM ( these are fonts metrics files, which font vendor will provide ) into the relevant directory so the the Reports application should pick them up.
3. If necessary, make changes in the alias file (uifont.ali ) for mapping to this font. If the layout objects in your report are associated with the same font name as the new font then mapping is not required. But if the fonts for the layout objects are different then you need to map the original fonts to the new ones. Make sure that the mapping rules should be defined in the right section depending on the printer type being used.

Re: [SunONE-JATO] Re: How to use a tiled view without a model

I'm not sure what is different for you now. You still parse the string
and put it into a data structure. Before the data structure was a
vector, in JATO its just a model with a "hidden" data structure (a hash
map).
MVC only really comes into play when you talk about where your write
this code, and where the data structure is being stored. So really, JATO
takes care of half of the MVC'ness of it all (where the data is store).
You just decide where to be the code to populate the model.
Make sense?
Is there something different required of you in JATO in this scenario
that I am not grasping?
c
Hoskins, John D. wrote:
Thanks for the feedback.
The problem I was solving involved a single string, which contained
delimited subsets of information.
The string looked like
this:"time|analyst|description|time|analyst|description|..."
In ND, I parsed it apart into it's components (time vector, analyst vector,
description vector), populated the repeated.
With JATO, how would I make a model for something that doesn't have a
database component like this?
I'm pretty new to this MVC thing, so bear with me.
John D. Hoskins
Telephone & Data Systems
Application Development & Support
Voice: 608.664.8263
Fax: 608.664.8288
Email: john.hoskins@t...
-----Original Message-----
From: Craig V. Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098031198039130252055210">craig.conover@s...</a>]
Sent: 6/26/2002 3.22 PM
Subject: Re: [SunONE-JATO] Re: How to use a tiled view without a model
I guess the only thing "weird" (for lack of a better term) about what
you are doing is that your are populating the model on the "display
cycle". Typically, the cycle goes like this:
Request -> populate model -> update data store -> retrieve data to
populate model -> display data
some of the above steps are optional but hopefully you get the point I
am making.
So what you are doing is:
Request -> populate model/display data
If it works for you, then it's not necessarilly wrong. But I would
probably have my model populated before I forwarded to the target
(displaying view bean) or at a minimum, in the begin display event of
the view bean or the tiled view, but not during the iteration of the
tiled view.
c
jhoskins wrote:
Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- Craig V. Conover wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

Craig,
Thanks for the pointers. I ended up doing something else. I set the
models setSize() method to set the max size, and as the tiles fields
iterated, populated the value from some vectors I had the data in
already. Is this solution fraught with peril and will ultimately fail,
or should I try your way?
John
--- "Craig V. Conover" wrote:
John,
Check out the docs for DefaultModel. There is an appendRow() method.
So get your tiledview's primary model (the tiledview's primary model
should be set to use an instance of DefaultModel), model.appendRow(),
then model.setValue("fieldname", value) for each value.
Rinse, repeat as needed.
c
jhoskins wrote:
I would like to use a tiled view, but populate the fields manually.
Any pointers about where I can set the size of the tiled view? I tried
setMaxDisplayTiles() in the beginDisplay, but it won't get down and
generate the rows.
John Hoskins
To download the latest version of JATO, please visit:
http://www.sun.com/software/download/developer/5102.html
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp

How to use the t-code vf31 tor taking print out of invoice

Hi,
How to use the t-code vf31 for taking print out,am getting an error like no message for initial processing exist,
venu

Hi,
Please find the steps
Output type                     RD00
Transmission medium             1
Sort order                      01
Processing mode                 1
Please give the oppropriate fields,
if the still error persists check the configuration in NACE transaction code.
thanks
Kuntla

How to chage Workspace Start Page without installing Reporting and Analysis

Hi:
any one know how to chage Workspace Start Page without installing Reporting and Analysis?
thanks

Not totally sure what you are asking but if you want to change the start page for users/groups have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/bpmui_admin/frameset.htm?assigning_default_preferences.html
Cheers
John
http://john-goodwin.blogspot.com/

How to chage Workspace Start Page without installing Reporting and Analys?

Hi:
any one know how to chage Workspace Start Page without installing Reporting and Analysis?
thanks

Not totally sure what you are asking but if you want to change the start page for users/groups have a read of - http://download.oracle.com/docs/cd/E17236_01/epm.1112/bpmui_admin/frameset.htm?assigning_default_preferences.html
Cheers
John
http://john-goodwin.blogspot.com/

How to use X-Fi Effects without selecting SB as the default sound device?

How to use X-Fi Effects without selecting SB as the default sound device?Hello everyone,
That's my situation.
I have Sound Blaster X-Fi Go sound card and I am using SRS HD Audio Lab. SRS HD Audio Lab was selected as the default audio device and X-Fi effects (X-Fi CMSS-3d, Equalizer etc.) was working without any problem in Windows Xp. I have Windows 7 now and when i select SRS HD Audio Lab as the default device, Creative effects are not working, i must select "SB X-Fi Go!" to get them working but i can't use SRS HD Audio Lab in that case. SRS is also using SB X-Fi Go sound card as the output and volume adjustment on console launcher is working but something is disabling the effects. Any solutions to enable effects ?
Thanks.

If the kernel modules for your sound card and webcam both support the index parameter (use modinfo to find out) then adding
options <name_of_preferred_card's_kernel_module> index=0
options <name_of_second_card's_kernel_module> index=1
to /etc/modprobe.d/modprobe.conf (or another modprobe conf file of your choice) should solve the problem.

How to use "find my phone" without using iCloud

How to use “find my phone” without using iCloud?
Previously, when I used my mobile me account I was not forced to use iCloud. Is there a way around this?

Just ignore any prompts you get. Don't click the move to iCloud button and don't visit me.com/move. Just keep using mobileme as you have been.
The ONLY clickable button is "Open iCloud.com". I have NO other options. (Using Mac OS on a MacPro)
( somehow my reply was marked as a correct answer, I did not do this, and I can find a way to remove it.)

How to restore new, clean OS without Install Disc ?

I have bought MacBook Air 2nd hand. How to restore new, clean OS without Install Disc ?

You can purchase the Snow Leopard DVD at the Apple Store. It ships as 10.6.3 so you'll need to do a software update to get to 10.6.8.

How can I connect oracle without installing its SQL*Net client?

How can I connect oracle without installing its SQL*Net client?

Pls suggest, any possible solution, i cross checked from below link, and tried to install the instant clients, but
http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
its showing me error of "This application has failed to start because OCI.dll was not found. Re-installing the application may fix this problem."
Let me know if you have any thing on this.

How to restore a control file without having its backup

Hi,
Can any one please suggest me how to restore a control file without having its backup.
Thanks

To add to what SB said, in years past the instructions for re-creating the control file manually were contained in the DBA Administration manual. It used to be and may still be common to be taking and saving a "backup control file to trace" for this purpose.
If you lost only the primary copy of the control file and it is an OS file then while the database is shutdown you can copy the secondary over the primary and then use if to start the database. If the control file is stored in ASM then there should be a way to perform the copy via ASM.
If you use rman for backups then a copy of the control file should be part of the backup process and you can retrieve it from the backup set then perform recovery using the backup control file though I do note the OP said something to the effect no backup exists. Still, I have knows of instances where the DBA did not realize that the backup set contained the control file and the spfile so I think this is worth mentioning just in case.
HTH -- Mark D Powell --

How to restore from Time Machine WITHOUT install discs using a second Mac

It's a question that is asked repeatedly all over the web by Mac users like me that bought in to Time Machine (TM) on the assumption that if their computer died one day it would be a piece of cake to restore from it, only for that day to come and then to be told "ahh, okay the first thing is to get your computers install discs..." (loud crashing sound of world falling around ears).
I've never been able to afford a new Mac and both of my machines were bought second-hand. Neither came with Leopard (both have Tiger and have been upgraded to Leopard via the net). This was never supposed to be a problem as I've been backing up with TM. However it appears that Tiger discs are as much use as an inflatable dart board when it comes to using TM. So I've been faced with the possibility of having to spend £130 (about two hundred Pres Sheets, Yankees) on the Leopard install discs just so that I can have the option of restoring from TM. Bonkers.
However after much nashing of teeth, a very long weekend learning all sorts of things about 'Target Mode', 'Single User Mode', 'Verbose Mode', 'Open Source 9' etc the following solution has worked without the need to go out and buy those over-priced discs...
What you will need:
1 broken Mac requiring restoration
1 second donor Mac running Leopard (or Snow Leopard so long as the broken Mac can run it)
1 firewire cable with the correct fitting at either end to attach both Macs together
1 Time Machine backup
Note: The following is for when you have given up trying to boot from your hard drive. In my case I couldn't boot in to Safe Mode etc. so was forced to format my drive and re-import everything. If you've read this far I'm assuming your at the same point as well and have tried everything else that's out there first.
Also - both my Macs are Power PC's so can't run Snow Leopard, so I can't say 100% this will work with SL (Intel) machines. From what I've read Snow Leopard will work with this procedure too, but if you've found differently please feel free to add your experiences below...
STEP ONE: Format the corrupt Hard Drive or replace with a fresh HDD
*Link the two computers with a firewire.
*If you're replacing your HDD, remove your corrupted hard drive from the 'broken' machine and insert a new one.
*Power up the broken Mac whilst holding down the 'T' key. This will start it up in Target Mode and you'll get a nice firewire symbol floating around that machine's screen.
*Power up the second 'healthy' Mac. This will be our 'donor' machine. When it starts up after a few seconds you will see the hard drive of the broken Mac appear on the donor Mac's desktop.
*Using your donor Mac's 'Disc Utility', format the broken Mac's hard drive (now's the time to partition it etc. if you want to).
STEP TWO: Clone your donor Mac
Your broken Mac is no longer broken and now needs a new OS. But you don't have the discs, right? Well get this... you can clone your donor mac on to your machine, even if they are totally different i.e. a laptop on to a tower.
*Again using Disc Utility, click on your donor Mac's hard drive. The restore tab appears as an option.
*Click on restore and drag the donor Mac's hard drive that contains the operating system in to the Source box.
*Drag the newly formatted hard drive on the broken Mac in to the Destination box.
*Click restore. Your donor Mac's hard drive will now be 'cloned' on to your no-longer-broken Mac. Once this is done, eject the first Mac's hard drive from your donor Mac's desktop. You no longer need the donor Mac.
Ta daa! Your machine now starts up happy and smily again. Time to restore all that stuff that's been sat on your Time Machine drive...
STEP 3: Restore from Time Machine using Migration Assistant
This is the really clever part that prompted me to write this piece in the first place. Time Machine IS accessible without those Leopard install discs you don't have. You need to use something called 'Migration Assistant'.
*Start up your machine as normal and you'll see it is an exact clone of the donor machine. Weird huh?
*Attach your Time Machine hard drive. It will show up as an icon on the desktop and because of it's size, you'll be asked if you want to use it as a Time Machine backup. Err, NO YOU DON'T! Click 'cancel'.
*Open Migration Assistant (if you can't find it just type it in to Finder and click). There are three options, the middle one being to restore from TM or another disc. Yup, you want that one.
*Migration Assistant will now ask you what you want to restore in stages, firstly User Accounts, then folders, Apps etc. It will even import internet settings
And that's you done. Let Migration Assistant do it's thang... altogether I had about 140gb to restore, so it wasn't exactly speedy. This wasn't helped by the fact that my TM hard drive is connected via USB (yes, I know). Just leave it alone and it'll whirr happily away...
Before I go - you don't have an option of when to restore from, and will restore from the last Time Machine save. At least then you should be able to access TM and go 'backwards' if you need to.
Also - for a Mac expert, the above will be up there with 'Spot Goes To The Farm' in terms of complexity. However, for the rest of us the above is only available in fragments all over the net. By far the most common response to 'how do I restore from Time Machine without install discs' is 'you can't'. If I'd found the above information in one place I could have saved a lot of hair pulling and swearing over the last couple of days, so forgive me for sharing this workaround with the rest of the world. Meanwhile your expertise will come in very handy for the inevitable questions that will get posted below, so please feel free to help those people that won't be sure if this solution is the right one for them. I'm no expert, I just want to help people that were stuck in the same situation (and looking at the web, there's a LOT of them).
Hope this is of use to someone, thanks and *good luck*!

Most maintenance and repair, restore and install procedures require the use
of the correct OS X install DVD; be it an original machine-specific restore/install
disc set or a later retail non-specific general install disc set.
By having an unsupported system, perhaps installed via an illegal download or
other file-sharing scheme, where no retail official discs are involved and the
initial upgrade was done by other means outside of the License Agreements,
you are asking us to discuss a matter of illegal installation and use of a product.
There are no legal complete OS X system download upgrades online; only bits
that are update segments to a retail or as-shipped machine's original OS X install.
+{Or an installation where a previous owner had correct retail upgrade discs, &+
+chose to not include them with the re-sale of the computer it was installed in.}+
However, to answer the initial question. To get and use an externally enclosed
hard drive in suitable boot-capable housing, and get a free-running Clone
Utility (download online; often a donation-ware product, runs free) you can
make a bootable backup of everything in your computer to an external HDD.
This is the way to make a complete backup to restore all functions to the computer.
The Time Machine has some limits, in that it can restore only that which it saves.
It does not make a bootable clone of your entire computer system with apps and
your files, to an external drive device. A clone can. And some of the clone utility's
settings can also backup changes to an external drive's system; if that other drive
is attached to the computer correctly.
Carbon Copy Cloner, from Bombich Software; and also SuperDuper, another of
the most known software names you can download and use to clone boot-capable
system backups of your computer's hard disk drive contents, are often cited.
However you resolve the matter of the running OS X system in your computer,
derived from what appears to be questionable means, is part of the initial issue.
Since you do need to be able to fix an existing installation by unmounting the
computer's hard disk drive and run the computer from the other (install disc or
system clone) while it is Unmounted; and use the correct Disk Utility version to
help diagnose and perhaps be able to fix it. You can't use a Tiger version Disk
Utility to fix a Leopard installation, and so on.
So, the situation and replies as far as they can go (since the matter does
constitute an illegal system, if it was arrived at without correct discs) is a
limited one. And file sharing of copied Mac OS X (and other) software is
also considered illegal.
And, one way to get odd malware and unusual stuff, is to get an unauthorized
system upgrade from an illegal source online. You never know what's inside it.
The other reply was not a personal attack; the matter is of legal status and as
you have a product with a questionable system, the answer is to correct it.
And if you want to save everything in your computer, make a clone to a suitable
externally enclosed self-powered boot capable hard disk drive. With older PPC
Macs, that would best be to one with FireWire and the Oxford-type control chips.
However that works out...
Good luck & happy computing!

How to use ABAP BC400 training course(Flight model)package installed on R/3

Hi abapers,
SAP provided series of courses BC with R/3 where for educational purposes...BC400 is for example ABAP Workbench....There are bunch of programs when one would love to run on R/3 , play with them and see the result...My understanding is that there are BCXXX packages already in R/3 when one could use...in order to run the programs, copy them, change them etc...To make the story short - how I can run BC courses on r/3 without copy and paste form word documents..I see there are series of BCxxx packages on r/3 - should I do something with them from SE80 or should I use other t-code?.I will appreciate some more lights?
Regards, Jon

To run them, all you need to do is creating the data in the tables that they access and you can run them from SE38 or SE80. But if you want to change them and try different variations, you can copy them to a local object and make the changes. To do that you can again use the same SE38 or SE80, enter the program name and click on the COPY icon. Follow the prompts and where it asks for a package, chose local object because you don't want these test programs to be transported to other environments.

How to use property Upgrade Code in detection method "Windows Installer"?

Hi
I am a packaging specialists helping our deployment guys to add our software (100rds of installers) as application entries in SCCM 2012. The methods supplied by SCCM seem however quite generic and limited.
The detection method "Windows Installer" is hardcoded to use the Product Code, why?
Normal detection of Windows Installer packages are done using the Upgrade Code and the Product Version. Is it possible for us our self to add/reconfigure to use that method or are we forced to use the custom detection method?(both those methods should be provided
by SCCM to better match Windows Installer architecture)
Ps. It says in http://technet.microsoft.com/en-us/library/bb632336.aspx for Version that "This
must be in the standard Windows Installer four-part version number format.", but the version number is 255.255.65535 (which is real stupid) as described by http://msdn.microsoft.com/en-us/library/aa370859(v=vs.85).aspx. Ds.
Regards
Pär

Under LV 7.1 with DSC installed I get the same error code (-2147418113) but "explain error" gives me this.
"LabVIEW DSC: (Hex 0x8000FFFF) Catastrophic failure."
This prompts the question is it possible to set an activeX object running in a container for Full Screen.
This is probably a Q for MS.
If it look like it is possible, try to get a VB example and that will tell us what we have to do to make this work.
Ben
Message Edited by Ben on 10-31-2005 04:45 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How to use a provider code without installing its package?

Similar Messages

Maybe you are looking for