How to use a radiobutton group on table control ?

In the selection screen ,i could define a variable as radiobutton group xxx .It's just so easy ,button when I want to use it in the table control through the the wizard ,but in the 4.6c version there is simply no such as radionbutton component in the panel .how could i do ?

Hi Jack,
It's a bit tricky to get the Radio Button in the Table Control. Only a few things needs to be done.
1. Create a structure with an Checkbox field of TYPE CHAR 1.
2. Create the Table Control with Wizard and mark the Checkbox field as CHECKBOX in one of the popup.
3. In the Screen, right-click on the Checkbox field. You will get a list of options and there you should check the radio button option. You will get the selection as Radio button available across all the rows.
You can check out the demo codes at SE38 by searching DYNPRO.
Also have a look at this following link.
http://www.esnips.com/doc/48bd95e8-facc-4932-b923-465ba59bad24/Table-Control
Hope this will help.
Thanks,
Samantak.

Similar Messages

How to use selection column in a table control

I have given the name of the selection column to be 'DEF_SEL',now i want to select rows in the table control using the 'selection column attribute' and maniupulate it programmatically so that i would transport the rows selected using selection coulmn to a different table control.How would i do this?

Hi raja,
Once you have the table cobtrol built using the extra field in the internal table, all the selected rows will have DEF_SEL = 'X'.
Now you can loop your internal table and filter the records which were selected.
in pai modules:
loop at itab where DEF_SEL = 'X'.
Move itab information inrto another internal table.
append itab_new.
endloop.
have another table control which shows the data in the itab_new.
regards,
Ravi

How to use outer join on 3 tables

how to use outer join on 3 tables
say tables are mkpf,lips and vbrp
mkpf-xblnr = lips-vbeln
lips-vbeln = vbrp-vgbel

refer following querry
    select a~bukrs
           a~anln1
           a~ord42
           a~ord43
           b~afabe
           b~ndabj
           b~kaafa
           b~aafag
           c~kostl
           d~afasl
           d~ndjar
           d~ndper
    into corresponding fields of table gt_master
    from ( ( anla as a inner join anlc as b
    on abukrs = bbukrs
    and aanln1 = banln1
    and aanln2 = banln2 )
    inner join anlz as c
    on abukrs = cbukrs
    and aanln1 = canln1
    and aanln2 = canln2 )
    inner join anlb as d
    on abukrs = dbukrs
    and aanln1 = danln1
    and aanln2 = danln2
    where a~bukrs in s_comp.

How will use Select-Options in Read table Concept.

Hi All,
              How will use Select-Options in Read table. For example,
      Select-Options : test for bseg-prctr.
       Select * from bseg into table ITAB.
Read table ITAB with key prctr in test.
Last line is showing error. If any way to read ITAB as conditions given per select options.
Thankx Advance,,,

HI,
you cannot use " IN " with read statement , read statement is used as:
READ TABLE it_collect ASSIGNING <fs_collect>
                  WITH KEY   rbpl = <fs_wkdet>-arbpl
                             ufnr = <fs_wkdet>-aufnr.
anyways you can use loop at statement before read to use " into " statement as:
LOOP AT it_master INTO l_master
                                       WHERE werks       = l_werks
hope it will help you
regards
rahul
Edited by: RAHUL SHARMA on Dec 30, 2008 9:14 AM

How to use JSTL create a dynamic table according to a database???

How to use JSTL create a dynamic table according to a database in a web page? Who can help me? Thanks.

How to use JSTL create a dynamic table according to a
database in a web page? Who can help me? Thanks.???
Could you rephrase your quesion?
Do you want to display records by reading from a table in DB?

How to create screen resolution in bdc table control

hi gurus
can anyone suggest me
how to create screen resolution in bdc table control
thanks&regards
mark.

Hi ,
Using CTU_PARAMS table for screen resolution .
For this sample code.
This is for Transation FB60.
report ZZFB60
       no standard page heading line-size 255.
tables t100.
PARAMETERS : p_file1 like rlgrap-filename,
             p_doctyp like RF05A-BUSCS,
             p_invdat like INVFO-BLDAT,
             p_posdat like INVFO-BUDAT.
CONSTANTS : C_TRANS_FB60(4) VALUE 'FB60'.
*Parameter string for runtime of CALL TRANSACTION
data : l_option type ctu_params,
       l_subrc type sysubrc.
DATA : l_mstring(150).
data      accnt type char17.
data       : day   type char2,
             month type char2,
             year type char4,
             date1 type char10,
             date2 type char10.
data      : cnt(2) TYPE n,
             cnt1 type i,
             fld(25) TYPE c.
data : begin of excel occurs 0,
        fieldname(255) type c,
       end of excel.
DATA:BEGIN OF it_mess OCCURS 0,
         msgtyp(5),
         lms(200),
          msgv1(50),
     END OF it_mess.
data: begin of t_record occurs 0,
         BUKRS(004),
        ACCNT(017),
        XBLNR(016),
        WRBTR1(016),
        WAERS(005),
        SECCO(004) ,
        SGTXT(050),
        HKONT(010),
        WRBTR2(017),
        MWSKZ(002),
        GSBER(004),
        KOSTL(010),
     end of t_record.
*Internal Table for Header Data
DATA : BEGIN OF t_head OCCURS 0,
        BUKRS(004),      "Company Code
        ACCNT(017),      "Account or Vendor
        XBLNR(016),      "Reference
        WRBTR1(017),     "Amount in document currency
        WAERS(005),      "Currency
        SECCO(004),      "Section Code
        SGTXT(050),      "Text
        END OF t_head.
*Internal table for Item Data
DATA : BEGIN OF t_item OCCURS 0,
        ACCNT(017),      "Account
        HKONT(010),     "GL Account
        WRBTR2(017),    "Line item Amount in document currency
        MWSKZ(002),     "Tax Code
        GSBER(004),     " Business Area
        KOSTL(010),     "Cost centre
        END OF t_item.
DATA: IT_BDCDATA      LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
      IT_BDC_MESSAGES LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
*include bdcrecx1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
PERFORM file_selection.
PERFORM data_upload.
PERFORM table_control.
start-of-selection.
l_option-defsize = 'X'.
l_option-dismode = 'A'.
l_option-updmode = 'S'.
day = p_invdat+6(2).
month = p_invdat+4(2).
year = p_invdat+0(4).
concatenate day month year into date1 SEPARATED BY '.'.
day = p_posdat+6(2).
month = p_posdat+4(2).
year = p_posdat+0(4).
concatenate day month year into date2 SEPARATED BY '.'.
*perform open_group.
loop at t_head.
CLEAR    IT_BDCDATA.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using   'SAPLACHD'         '1000'.
perform bdc_field       using   'BDC_OKCODE'        '=ENTR'.
perform bdc_field       using   'BKPF-BUKRS'        t_head-bukrs.
perform bdc_dynpro      using   'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
perform bdc_field       using   'RF05A-BUSCS'       p_doctyp.
perform bdc_field       using   'INVFO-ACCNT'       t_head-accnt.
perform bdc_field       using   'INVFO-BLDAT'       date1.
perform bdc_field       using   'INVFO-BUDAT'       date2.
perform bdc_field       using   'INVFO-XBLNR'       t_head-xblnr.
perform bdc_field       using   'INVFO-WRBTR'       t_head-wrbtr1.
perform bdc_field       using   'INVFO-WAERS'       t_head-waers.
perform bdc_field       using   'INVFO-SECCO'       t_head-secco.
perform bdc_field       using   'INVFO-SGTXT'       t_head-sgtxt.
cnt = 1.
cnt1 = 1.
loop at t_item where accnt = t_head-accnt.
*if cnt > 4.
*cnt = 4.
*endif.
if cnt1 gt 1.
CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
perform bdc_field      using   fld                   'X'.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using 'BDC_OKCODE'        '=0005'.
endif.
perform bdc_dynpro      using 'SAPMF05A'          '1100'.
perform bdc_field       using   'BDC_OKCODE'        '/00'.
CONCATENATE 'ACGL_ITEM-HKONT(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-hkont.
CONCATENATE 'ACGL_ITEM-WRBTR(' cnt ')' INTO fld.
perform bdc_field using       fld                t_item-wrbtr2.
CONCATENATE 'ACGL_ITEM-MWSKZ(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-mwskz.
CONCATENATE 'ACGL_ITEM-GSBER(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-gsber.
CONCATENATE 'ACGL_ITEM-KOSTL(' cnt ')' INTO fld.
perform bdc_field       using fld                t_item-kostl.
perform bdc_field      using 'BDC_CURSOR' fld.
*CONCATENATE 'ACGL_ITEM-MARKSP(' cnt ')' INTO fld.
*perform bdc_field      using   fld                   'X'.
cnt1 = cnt1 + 1.
*cnt = cnt + 1.
*if cnt > 1.
*perform bdc_dynpro      using 'SAPMF05A'          '1100'.
*perform bdc_field       using 'BDC_OKCODE'        '=0005'.
**perform bdc_field       using 'BDC_OKCODE'        '=0006'.
*endif.
endloop.
perform bdc_dynpro      using 'SAPMF05A' '1100'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BS'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=BU'.
*perform bdc_transaction using 'FB60'.
CALL TRANSACTION C_TRANS_FB60 USING IT_BDCDATA options from l_option
                             MESSAGES INTO IT_BDC_MESSAGES.
perform error.
perform errordownload.
endloop.
*perform close_group.
*Form data_upload
FORM data_upload .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME              = p_file1
   FILETYPE              = 'DAT'
TABLES
    DATA_TAB             = t_record.
ENDFORM.                    " data_upload
*Form file_selection
FORM file_selection .
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'p_file1'
    IMPORTING
      file_name     = p_file1.
ENDFORM.                    " file_selection
Form BDC_DYNPRO
FORM BDC_DYNPRO using program dynpro.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROGRAM.
IT_BDCDATA-DYNPRO = DYNPRO.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
endform.
*Form BDC_FIELD
FORM bdc_field using fnam fval.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
Table Control
FORM table_control .
LOOP AT t_record.
    ON CHANGE OF t_record-accnt.
      MOVE-CORRESPONDING t_record TO t_head.
      APPEND t_head.
    ENDON.
loop at t_head.
         t_item-accnt   = t_head-accnt.
         t_item-hkont   = t_record-hkont.
         t_item-wrbtr2 = t_record-wrbtr2 .
         t_item-mwskz   = t_record-mwskz .
         t_item-gsber   = t_record-gsber .
         t_item-kostl   = t_record-kostl.
    APPEND t_item.
endloop.
     If t_record-level = 'H'.
         t_head-bukrs   = t_record-text1.
         t_head-accnt   = t_record-text2.
         t_head-xblnr   = t_record-text3.
         t_head-wrbtr1 = t_record-text4.
         t_head-waers   = t_record-text5.
         t_head-secco   = t_record-text6.
         t_head-sgtxt   = t_record-text7.
      APPEND t_head.
     else.
        t_item-accnt   = t_head-accnt.
        t_item-hkont   = t_record-text1.
        t_item-wrbtr2 = t_record-text2.
        t_item-mwskz   = t_record-text3.
        t_item-gsber   = t_record-text4.
        t_item-kostl   = t_record-text5.
     APPEND t_item.
     endif.
ENDLOOP.
ENDFORM.
FORM error .
LOOP AT IT_BDC_MESSAGES.
    IF IT_BDC_MESSAGES-msgtyp = 'E'.
   SELECT single * FROM t100 WHERE
                                sprsl = it_BDC_MESSAGES-msgspra
                                AND   arbgb = IT_BDC_MESSAGES-msgid
                                AND   msgnr = IT_BDC_MESSAGES-msgnr.
      IF sy-subrc = 0.
        l_mstring = t100-text.
        IF l_mstring CS '&1'.
          REPLACE '&1' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&2' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&3' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&4' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ELSE.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv1 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv2 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv3 INTO l_mstring.
          REPLACE '&' WITH IT_BDC_MESSAGES-msgv4 INTO l_mstring.
        ENDIF.
        CONDENSE l_mstring.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ELSE.
        it_mess-msgtyp = IT_BDC_MESSAGES-msgtyp.
        it_mess-lms = l_mstring.
        it_mess-msgv1 = IT_BDC_MESSAGES-msgv1.
        APPEND it_mess.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
form errordownload.
*down the internal table to excel file.
call function 'EXCEL_OLE_STANDARD_DAT'
           EXPORTING
                file_name                 = 'c:/Error.xls'
           TABLES
                data_tab                  = it_mess
                fieldnames                = excel
           EXCEPTIONS
                file_not_exist            = 1
                filename_expected         = 2
                communication_error       = 3
                ole_object_method_error   = 4
                ole_object_property_error = 5
                invalid_filename          = 6
                invalid_pivot_fields      = 7
                download_problem          = 8
                others                    = 9.
endform.
Reward if useful
Regards,
Narasimha
Edited by: narasimha marella on May 13, 2008 12:12 PM

How to read a current line in table control in dialoug program ?

How to read a current line in table control in dialoug program ?
this code required to provide F4 help.

Hi,
You can use the variable <tablecontrol>-Currentline as Ebus says but there is a problem with this.Suppose there are 10 records in the table control with only 5 records visible then when u press a page down and press F4 the first record in page 2, <tablecontrol>-Currentline will have value of 1 instead of 6.So you will need to write a small logic for that.
index = ( <tablecontrol>-topline - <tablecontrol>-currentline ) + 1.
read internal table itab at index.
Hope this helps.
Regards,
Vivek

How to validate the dates in the table control ?

How to validate the dates in the table control ?
Can I write like this ?
LOOP AT it_tab .
CHAIN.
FIELD : it_tab-strtdat,it_tab-enddat.
module date_validation.
ENDCHAIN.
ENDLOOP.
Module Date_validation.
ranges : vdat type sy-datum.
vdat-sign = 'I'.
VDAT-LOW = it_tab-STRTDAT.
VDAT-HIGH = it_tab-ENDDAT.
VDAT-OPTION = 'BT'.
APPEND VDAT.
WHAT CODE I have to write here to validate ?
and If I write like this How can we know which is the current row being add ?
It loops total internal table ..?
Bye,
Muttu.

Hi,
I think there is no need to put chain endchain.
To do validation you have to write module in PAI which does required validations.
Thanks
DARSHAN PATEL

How to delete a column from the table control in module pool?

Hi,
can any one please tell How to delete a column from the table control in module pool?
thanks in advance
warm regards
HareeshKumar N

hi hareesh,
I think it is better to hide it.
How to hide: You can check this link
Dynamic Hide column in table control

How to use Bind Variables in Essbase data control

Hi,
I am trying to use Bind Variables in MDX query while creating the Essbase Data Control. I have used the below query with the Bind Variable.. this query is working in Essbase admin console..but it is throwing error (*Invalid MDX Query)* while creating Essbase Datacontrol in JDeveloper.
MDX Query : SELECT {[Measures].Msr_2} ON COLUMNS, [Time].Children ON ROWS FROM cube
where ($name)
Could any body suggest me on how to use bind variables with Essbase Data control.
Thanks,
Swathi

Hello Swathi, can you please help me how you created Essbase DataControl? Also were you able to figure out this?
Thanks, Praveen.

How to handle multiple radiobutton groups in a selection screen?

Hi All,
I have tabbed selection screen.
* SELECTION SCREEN                                    *
SELECTION-SCREEN BEGIN OF TABBED BLOCK TABB1 FOR 20 LINES.
SELECTION-SCREEN TAB (20) TAB1 USER-COMMAND TAB1
                     DEFAULT SCREEN 1010.
SELECTION-SCREEN TAB (20) TAB2 USER-COMMAND TAB2
                     DEFAULT SCREEN 1020.
SELECTION-SCREEN END OF BLOCK TABB1.
I have a radiobutton group in each of my tabs in the selection screen.
SELECTION-SCREEN BEGIN OF SCREEN 1010 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK GUI WITH FRAME." TITLE TEXT-GUI.
PARAMETERS: P_GUI1 RADIOBUTTON GROUP GUI,
            P_GUI2 RADIOBUTTON GROUP GUI,
            P_GUI3 RADIOBUTTON GROUP GUI,
            P_GUI4 RADIOBUTTON GROUP GUI,
            P_GUI5 RADIOBUTTON GROUP GUI,
SELECTION-SCREEN END OF BLOCK GUI.
SELECTION-SCREEN END OF SCREEN 1010.
SELECTION-SCREEN BEGIN OF SCREEN 1020 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK REP WITH FRAME." TITLE TEXT-REP.
PARAMETERS: P_REP1 RADIOBUTTON GROUP REP,
            P_REP2 RADIOBUTTON GROUP REP,
            P_REP3 RADIOBUTTON GROUP REP.
SELECTION-SCREEN END OF BLOCK REP.
SELECTION-SCREEN END OF SCREEN 1020.
The issue is I want to be able to process only one of the tabs based on the checked radiobutton, but by default both the groups will have one of the radiobuttons checked. My piece of code is something like this.
data : c_selected(1) value 'X'.
case c_selected.
when P_GUI1.
* Process GUI 1
when P_GUI2.
* Process GUI 2
when P_GUI3.
* Process GUI 3
when P_GUI4.
* Process GUI 4
when P_GUI5.
* Process GUI 5
when P_REP1.
* Process Report 1
when P_REP2.
* Process Report 2
when P_REP3.
* Process Report 3
endcase.
How do I acheive this?
Karthik
Edited by: Karthik Boyapalli on Jun 16, 2008 9:10 PM

The issue is I want to be able to process only one of the tabs based on the checked radiobutton, but by default both the groups will have one of the radiobuttons checked. My piece of code is something like this.
You will be able to process the Radiobutton based on the tab. Use the sy-ucomm to determine the TAB that is selected on the selection screen. Then you can do further processing based on the radio button selected.
Only one TAB will be available for User Interaction so there will be no issue with processing based on the radio button

How to use aggregate function on internal table

hi experts,
I am beginner in abap.I want to use sum function on internal table.
I have structure as follow:
types: begin of ty_ftab,
       docno TYPE bkpf-belnr,
       comcode TYPE bkpf-bukrs,
       year TYPE bkpf-gjahr,
       line_itm type bsad-buzei,
       cust type bsad-kunnr,
       amt type bsad-dmbtr,
end of ty_ftab.
data: it_ftab type table of ty_ftab,
           wa_ftab type ty_ftab.
i fetched data successfully into it_ftab from bkpf and bsad table and displyed into alv.
now i want sum of amt using group by cust and want to display like
cust        total_amt
in next screen...
displying part is not important but how can i do sum of amt according to cust value? Is there in way to query on internal table?

Hi,
try this code,
data : i_sort TYPE TABLE OF slis_sortinfo_alv
w_sort like LINE OF i_sort.
sort it_ftab by cust.
w_sort-subtot = 'X'.
w_sort-fieldname = 'AMT'.
w_sort-tabname = 'it_ftab'.
APPEND w_sort to i_sort.
In fieldcatalog :
w_fcat-fieldname = 'AMT'.
w_fcat-tabname = 'it_ftab'.
w_fcat-do_sum = 'X'.
In REUSE_ALV_GRID_DISPLAY FUNCTION MODULE provide the it_sort.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
* EXPORTING
*    I_INTERFACE_CHECK                = ' '
*    I_BYPASSING_BUFFER                = ' '
*    I_BUFFER_ACTIVE                  = ' '
*    I_CALLBACK_PROGRAM                = ' '
*    I_CALLBACK_PF_STATUS_SET          = ' '
*    I_CALLBACK_USER_COMMAND          = ' '
*    I_CALLBACK_TOP_OF_PAGE            = ' '
*    I_CALLBACK_HTML_TOP_OF_PAGE      = ' '
*    I_CALLBACK_HTML_END_OF_LIST      = ' '
*    I_STRUCTURE_NAME                  =
*    I_BACKGROUND_ID                  = ' '
*    I_GRID_TITLE                      =
*    I_GRID_SETTINGS                  =
*    IS_LAYOUT                        =
*    IT_FIELDCAT                      =
*    IT_EXCLUDING                      =
*    IT_SPECIAL_GROUPS                =
    IT_SORT                          = i_sort
*    IT_FILTER                        =
*    IS_SEL_HIDE                      =
*    I_DEFAULT                        = 'X'
*    I_SAVE                            = ' '
*    IS_VARIANT                        =
*    IT_EVENTS                        =
*    IT_EVENT_EXIT                    =
*    IS_PRINT                          =
*    IS_REPREP_ID                      =
*    I_SCREEN_START_COLUMN            = 0
*    I_SCREEN_START_LINE              = 0
*    I_SCREEN_END_COLUMN              = 0
*    I_SCREEN_END_LINE                = 0
*    I_HTML_HEIGHT_TOP                = 0
*    I_HTML_HEIGHT_END                = 0
*    IT_ALV_GRAPHICS                  =
*    IT_HYPERLINK                      =
*    IT_ADD_FIELDCAT                  =
*    IT_EXCEPT_QINFO                  =
*    IR_SALV_FULLSCREEN_ADAPTER        =
* IMPORTING
*    E_EXIT_CAUSED_BY_CALLER          =
*    ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          =
* EXCEPTIONS
*    PROGRAM_ERROR                    = 1
*    OTHERS                            = 2
IF sy-subrc <> 0.
* Implement suitable error handling here
ENDIF.

How to use a variable as a table name in PL/SQL?

Hello all.
I was given one day to wrote a piece of PL/SQL code to do a query. That is,
First select two columns from one table and use them to build another table's name, then
     join the two tables. I'm not sure if variables can be used in the select list, if possible,
     how to reference them?
-- My code is
DECLARE
     tablename varchar2(40);
     CURSOR c1 IS
select a.sourcesystemcode, a.adminorganizationno from cdb1.organization_mapping a
where exists( select 1 from cdb1.organization_mapping b where
a.cdborganizationno = b.cdborganizationno and a.adminorganizationno != b.adminorganizationno)
order by a.cdborganizationno,a.adminorganizationno;
     v_src_sys_cod cdb1.organization_mapping.sourcesystemcode%TYPE;
     v_adm_org_no cdb1.organization_mapping.adminorganizationno%TYPE;
BEGIN
OPEN c1;
LOOP
FETCH c1 INTO v_src_sys_cod, v_adm_org_no;
EXIT WHEN c1%NOTFOUND;
tablename := 'ODS1.SRC_' || v_src_sys_cod || v_adm_org_no || 'ACTORG_CURR';
select c.cdborganizationno, c.sourcesystemcode, c.adminorganizationno, c.sourceorganizationno, d.ibkcde, d.orgnam
from cdb1.organization_mapping c inner join tablename d on c.sourceorganizationno = d.orgidt;
END LOOP;
CLOSE c1;
END;
The error message says "... the table or view does not exist... line 18, column 66..."
It says the variable "tablename" wasn't build or build incorrectly.
Please give the solution.

If the TABLEs being queried are already known, and it is just a matter of which one to query, perhaps you can CREATE a VIEW that uses all the TABLEs with a UNION ALL, and include an identifier COLUMN.
CREATE VIEW SRC_ALL_ACTORG_CURR
AS
SELECT 'aa' Name, ibkcde, orgnam FROM SRC_aa_ACTORG_CURR UNION ALL
SELECT 'bb' Name, ibkcde, orgnam FROM SRC_bb_ACTORG_CURR UNION ALL
SELECT 'cc' Name, ibkcde, orgnam FROM SRC_cc_ACTORG_CURR UNION ALL
SELECT 'dd' Name, ibkcde, orgnam FROM SRC_dd_ACTORG_CURR UNION ALL
SELECT 'ee' Name, ibkcde, orgnam FROM SRC_ee_ACTORG_CURR;
Then, in you query:
select c.cdborganizationno, c.sourcesystemcode, c.adminorganizationno, c.sourceorganizationno, d.ibkcde, d.orgnam
from cdb1.organization_mapping c inner join SRC_ALL_ACTORG_CURR d on c.sourceorganizationno = d.orgidt and d.Name = v_src_sys_cod || v_adm_org_no;

How to use the buying group to get the report?

Dear all:
I check the function of buying group in customer master data.
system show The buying group is used for reporting purposes only. You can, for example, generate an account statement with line items for all members and for the buying group.
but i check all report link with customer, not find this fields.
why? and how to use this function in the report?
can you give some suggestion?
thanks
ALEX

anybody can help me?

How to implement line selectability for a table control using table Wizard?

Hello SDN Community,
I have created a table control using the Table Wizard. I found my exact question in this forum, but unfortunately it had not been andsered. While I cannot paste a screen-print into this plane-text area, here are the steps I followed...
1) SE51
2) Create new screen 0100
3) Click Layout button
4) Clidk Table Control (with Wizard) and draw box on canvas.
5) Step is "Start" - click Continue
6) Step is "Name of Table Control" - provided name
7) Step is "Table Name" - provided name of dictionary table (AUFK)
8) Step is "Definition of Columns" - selected order numver and order text
9) Step is "Table Control Attributes" - Line Selectability is in display mode - cannot set it.
I would like to have a selectability column for my table. Would appreciate any insight into how to do this.
Thank you,
Dean Atteberry.

This is a puzzling...
For the table control wizard, in the Table Control Attributes step, I was able to get line selectability to open up by declaring a char01 data element at the beginning of my type.
The puzzling is in regards to the "Selection col. fld" entry field.
If I leave it blank and try to go to the next step, I get message "Enter the name of the selection column if you are using a program table"
So it looked like it wanted to know the name of my selection column. So I type in "CHAR1". and got the message "The field "CHAR1" for the selection column is already contained in the table."
Hmmmmm.... don't understand............
Dean Atteberry.

How to use a radiobutton group on table control ?

Similar Messages

Maybe you are looking for