How to use Alcon in Flash Builder 4.5

I am using Alcon as memory and performance profilers.
I searched around the Internet, only found articles that talk about how to use it in Flash:
Debug.monitor(stage, 1000);
But what is the counterpart to this statement in Flex environment? What should I pass to monitor method?
Thanks.

Hi
Currently i haven't found any documentation describing how to compile and use this tlfx.
I went through the change log to see what was added, and it looked quite good.
I have tried to compile it, but my experience with fb4 is very limited. I have only worked with it for a couple of months.
I would like a description of how to compile and use this tlfx liblrary in a flex application, so that i can have table supprt as well as support for bullets and numbering.
TIA
Allan

Similar Messages

How to use tlfx in Flash builder 4.

Hi,
How can i compile the tlfxproject and include it in flash builder 4?
I need the table and bullet features, to create an advanced editor.
I already have the source for tlfx, but don't know how to proceede.
Thanks.
Allan

Hi
Currently i haven't found any documentation describing how to compile and use this tlfx.
I went through the change log to see what was added, and it looked quite good.
I have tried to compile it, but my experience with fb4 is very limited. I have only worked with it for a couple of months.
I would like a description of how to compile and use this tlfx liblrary in a flex application, so that i can have table supprt as well as support for bullets and numbering.
TIA
Allan

Using flex4.1, Flash Builder giving error "flash.filesystem::StorageVolume could not be found."

Hi there,
          I'm trying to copy some files to Storage Card on a AIR application. Is this possible with the latest version of the AIR SDK (2.0)?
          I am developing in Flash Builder. I have downloaded the lastest flex sdk(4.1) and used it.
          Flash Builder then recognises the StorageVolume and StorageVolumeInfo classes. However when I then run the app the debugger throws an error on the following line:
LINE:
var volumes:Vector.<StorageVolume> = StorageVolumeInfo.storageVolumeInfo.getStorageVolumes();
Note: I have imported both classes as well.

I'v read the article
http://forums.adobe.com/message/2984004#2984004,
and checked my application.xml, The content of the first two lines is:
<?xml version="1.0" encoding="utf-8" standalone="no"?>
<application xmlns="http://ns.adobe.com/air/application/2.0">
Error message from flash builder debug:
typecheck Player/getLocalVideo()
outer-scope = [global Object$ flash.events::EventDispatcher$ flash.display::DisplayObject$ flash.display::InteractiveObject$ flash.display::DisplayObjectContainer$ flash.display::Sprite$ mx.core::FlexSprite$ mx.core::UIComponent$ spark.components.supportClasses::SkinnableComponent$ spark.components.supportClasses::SkinnableContainerBase$ spark.components::SkinnableContainer$ spark.components::Application$ spark.components::WindowedApplication$ Player$]
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
0:debugfile "D:\My Documents\Adobe Flash Builder 4\LiveVideoClient\OnSiteEnforceLawPublish\src;;Player.mxml"
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
2:debugline 20
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} ()
4:getlocal0
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {} (Player[O])
5:pushscope
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} ()
6:pushnull
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
7:coerce_s
                       [Player[O] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (String?[S])
8:setlocal 5
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} ()
10:pushnull
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
11:coerce mx.collections::ArrayCollection
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] *[A] *[A] *[A] *[A] *[A]] {Player[O]} (mx.collections::ArrayCollection?[O])
13:setlocal 6
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} ()
15:pushnull
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} (null[O])
16:coerce flash.filesystem::File
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] *[A] *[A] *[A] *[A]] {Player[O]} (flash.filesystem::File?[O])
18:setlocal 7
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} ()
20:pushnull
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} (null[O])
21:coerce_s
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] *[A] *[A] *[A]] {Player[O]} (String?[S])
22:setlocal 8
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} ()
24:pushnull
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} (null[O])
25:coerce_s
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] *[A] *[A]] {Player[O]} (String?[S])
26:setlocal 9
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
28:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
33:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
38:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
43:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
48:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
53:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
58:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
63:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
68:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
73:debug
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
78:debugline 23
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} ()
80:findpropstrict flash.filesystem::StorageVolumeInfo
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (Object[A])
82:getproperty flash.filesystem::StorageVolumeInfo
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
84:getproperty storageVolumeInfo
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
86:callproperty getStorageVolumes 0
                       [Player[O] *[A] *[A] *[A] *[A] String?[S] mx.collections::ArrayCollection?[O] flash.filesystem::File?[O] String?[S] String?[S] *[A]] {Player[O]} (*[A])
89:coerce __AS3__.vec::Vector
VerifyError: Error #1014: Class flash.filesystem::StorageVolume could not be found.
at Player/___Player_WindowedApplication1_windowComplete()[D:\My Documents\Adobe Flash Builder 4\LiveVideoClient\OnSiteEnforceLawPublish\src\Player.mxml:4]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.core::UIComponent/dispatchEvent()[E:\dev\4.x\frameworks\projects\framework\src\mx\core \UIComponent.as:12528]
at spark.components::WindowedApplication/enterFrameHandler()[E:\dev\4.x\frameworks\projects\ airspark\src\spark\components\WindowedApplication.as:2355]

Using papervision in flash builder and getting TypeError: Error #1009: when using object.pitch(5)

When i use papervision in flash builder and i am doing a test, when i render a sphere using papervision with the following code it renders me the sphere.
When i add a line sphere.pitch(2); ||
sphere.yaw(2);
sphere.roll(2);
i get the following error,
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at PvTest/onRenderTick()[D:\Android 3D\PvTest\src\PvTest.as:39]
Can anyone help me figure out the error
For additional Info, these are the imports i am doing:
import org.papervision3d.objects.primitives.Sphere;
import org.papervision3d.view.BasicView;

I followed the steps and read some of your comments on the same top topic in another thread. When I put it on the first frame it was okay but the next button on that page had the same problem. So what I am guessing is that I have to either create a document class or put the actions where the buttons are. Am I understanding that correctly? In the other thread in which you helped someone else; there was so comments about document class. I found a tutorial on it and the way I understand it is that it you can put you actions in an external document. But you have to include in the event listener the frame in which you want that action to happen.
Thaks for your help. And patience.

How to use JavaBean in Form Builder 6i

Hi,
How to use JavaBean in Form Builder 6i (Oracle Developer 6i)?.
i'am using Oracle Sever 8.0.4 and Oracle Developer 6i.
Please give your valuable suggestion
Regards
Seema

I would suggest you start with the sample Java bean code we have
on otn.
http://otn.oracle.com/products/forms
go to the sample code section.

How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Using TransformGestureEvents in Flash Builder

Hi all,
I am trying to use the TransformGestureEvents to allow interaction inside of a FLARE based application. I want to create a data visualisation app with touch interaction.
I have Flash Player 10.1, which is needed for these classes, as i have already used them in a Flash CS5 test project, and i worked great! But when i try to import the transform gesture events, an error appears saying:
1172: Defination flash.events:TransformGestureEvents could not be found.
Has anyone got any idea how i can use TransformGestureEvents inside of Flash Builder?
Any advice, is deeply appreciated!
Thanks in advance

Thanks for your reply!
I am using flex 4.0 SDK and flash player 10.1.
Since then i have tried to use the adobe air 2.5 SDK because I read somewhere that it included Touch events. I have tried to overlay the AIR SDK into my Flex 4.0 SDK folder and it doesn't seem to have worked. I am using a mac and the documentation out there to do this , isn't exactly straight forward and ive followed the instructions, but no success. Im really surprised that Adobe have not released a flex SDk with Touch events include, i mean it seem dumb not too!?!?
Maybe if i gave you more of an insight into what i want to achieve, this could help.
I want to use flash builder to create a search for a series of media API's (e.g Spotify/Last.FM or YouTube) the user would search for what they want and the results would be displayed in a Radial Tree Layout using the FLARE library to construct the visualisaton and I wanted to use Gestures to enable the user to navigate around the results, (ZOOMING, SELECTING, etc). I have thought about using OpenFrameworks to do this, but I would prefer to use FLASH.
I am creating this project for my Final Degree!
Any advice on this, would be great.

Using SSL in flash builder 4 data service with PHP

I am converting a program I wrote with Flex 3 into Flash builder 4, and I wanted to try to use the built-in data services instead of using the httpservice as I was doing before. The one thing I cannot figure out is how to make it use a secure connection (https) when connecting to that data service. I have looked everywhere I can think of and cannot find where I can set this. Anyone know where and how to set this? The server I am connecting to only allows secure connections, so doing it any other way is not an option.
Thanks.

Having the same problem with a Java REST service using HTTPS requests, Adobe Air appears to ask to verify the certificate with every single request on windows ??? and on mac after accepting the certificate we do not get a result?

How to make this in Flash Builder?

I am looking to make an Android app and one of the functionalities is somehting like in the video.
I am new to Flash Builder and looking for some help to make it.
Anyone has a tutrial or has any idea how to make this?
Android SQLite App Development with Flash Builder and Flex - YouTube

I'll give you the short answer, Flash Catalyst is built on top of the Flex Framework and it's libraries. When you launch or load a FC swf, it will contact the Adobe servers to check the status of various libraries. Since you are loading this into a standard Flash Professional created swf, you are by passing some of the fallbacks that exist.
If the movieClip that you are creating is just a filler image, and you are just centering the FC swf, then I also recommend using CSS to display the filler and some HTML/CSS to center the content.
Hope this helps a little.
If you did the loading of the FC swf from a Flash Builder based project, you should not have the issue, since it is a Flex based SWF, the framework checks are already handled for you.
Chris

Is there a limit to the amount of SWCS I can use in my Flash Builder app?

I have 3 swc folders in my flash builder project that includes about 40 swcs total. Each swc is a simple flash animation with a size of about 500 kb each. When I include and complile about 20 of them in my project, things work fine.
When I try to include all my swcs, the app compiles, but when i make changes in my code and save those changes, each time the compile becomes slower and eventually my flash builder freezes at about 52%, gives me a "java heap error" message, and then crashes. After restarting FB, when I take out most of the swcs from the build, FB acts normal again. Attached is a screen shot of my error.
Is there a limit in size or amount of swcs that I can use in my FB application?

There are no limits. But there is a known memory leak (which is being fixed for a later release).
Would it be possible to attach a sample SWC so that we can confirm whether this is a known leak or not? I'll take care of filing this in bugs.adobe.com.
Meanwhile, in your Flash Builder installation directory, you can edit FlashBuilder.ini to bump up max heap size by editing:
-Xmx512m
to
-Xmx800m

How to use search on Flash 8

I am using Flash Pro 8. I created a .fla file which contains
several objects, each of them has the ActionScript. Now I want to
search through all the ActionScript for a variable such as named
GeneratedXML (already used somewhere in the application).
So I go to Edit --> Find and Replace or Find Next. Neither
can locate the "GeneratedXML". But I know there is indeed a
variable named: GeneratedXML, because I can see it right before me.
I just want to test the search function of this tool(Flash
8). I need do a lot of searching and location of a parameters,
function names, etc throughout the .fla file.
Then how to use or do a search for a text in (the
ActionScript) in Flash 8?
Thanks
Scott

If you just click the magnifying glass in an actionscript
window its only a simple find and replace for that frame.
Try using the Edit Menu Find and Replace option...
Find All

How to Use Captcha in Flash Forms

Hi, does anyone knows how to use a captcha in flash forms
I am using Coldfusion 7 not version 8.
Please Guide Me
Cheers

> CF response
You said you needed help with ActionScript. What I gave you
is ActionScript.
Coldfusion has no built-in method called
match. You should use REMatch(reg_expression, string) or
REMatchNoCase(reg_expression, string), assuming you're on CF 8, of
course.

Link File Using Code in Flash Builder

Is there any way to link to a file on a local drive rather than a url by using action script in Flash builder? For example is there a type of "file request" instead of "url request" command I can use?
Thanks,
SN

Hello Susan;
I don't know if this helps, but I was having code hint issues also, here is the link to the discussion.
http://forums.adobe.com/thread/553610?tstart=0
John

How to use powl in page builder with WDR_CHIP_CATALOG component

Hi all,
I´m trying to create a home page via page builder.
Within the component WDR_CHIP_PAGE I use for the chip catalog component WDR_CHIP_CATALOG. For configuration of this component I´ve tried many options but I am not able to include powls. Which configuration name should I enter (e.g: BSSP_CHIP_CATALOG_HP)?Inside the configuration context, at selection in provider I´ve included as provider X-SAP-WDY-CHIP but nothing happens.
Thanks and best regards
Pablo

You can use http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air3-8_sdk_sa_mac.tbz2 with FB 4.6. Below are the steps to overlay the sdk
1. Exit Flash Builder.
2. (Optional) Back up the Flex SDK by copying the entire directory.
In Flash Builder, for example, copy the directory at:
Mac OS: /Applications/Adobe Flash Builder 4.7/sdks/4.6.0
3. Download the appropriate AIR SDK file for your operating system e.g. http://labsdownload.adobe.com/pub/labs/flashruntimes/air/air3-8_sdk_sa_mac.tbz2, unzip and save it on your MAC OS X.
4. In Terminal, run the below command
sudo ditto /path/air3-8_sdk_sa_mac /Applications/Adobe\ Flash\ Builder\ 4.6/sdks/4.6.0
5. (Optional) To access the new AIR 3.8 APIs, update your application descriptor file to the 3.8 namespace.
To update the namespace, change the xmlns attribute in your application descriptor to: <application xmlns="http://ns.adobe.com/air/application/3.8">
6. (Optional) To ensure that the output SWF file targets SWF version 21, pass an additional compiler argument: -swf-version=21.
Hope this will help.
Regards,
Nimit

How to include assets with Flash Builder?

with the flash IDE i can add additional assets in the iPhone OS Settings under "Included File"
how do I do the same with the Flash Builder?

Ah - stupid me. It's so simple - just give the filenames of all the files to be included as additional parameters to the adt tool

How to use Alcon in Flash Builder 4.5

Similar Messages

Maybe you are looking for