How to use an ActiveMQ broker plugin
Sorry in advance if this is a stupid question but I've just inherited this project and have never used BlazeDS or ActiveMQ before. I've got a collection of various programs that are communicating through BlazeDS and ActiveMQ and I've been tasked with recording all the messages being passed between them for later analysis. It appears from this link that I could just develop a BrokerPlugin that could take care of this pretty easily. However I don't know how to add this BrokerPlugin to the system. There doesn't any appear to be any configuration data for ActiveMQ in the current system. I believe it was built on the BlazeDS turnkey server with ActiveMQ added to handle the JMS integration.
Also, I had originally just created a small app that subscribes to all the topics and saves the messages out to an xml file. That part worked for most of the messages but some of the message destinations are defined as queues though so they can't have more than one subscriber. I wasn't sure how to go about getting these messages without using a BrokerPlugin.
Any help would be greatly appreciated.
> I face the problem that I can't find out how to use the plugin in Acrobat with Javascript.
That's right. You can't.
>
>But I can't find out how to use the methods of the plugin.
You cannot use the methods of a plug-in. They are for its own internal
use.
A plug-in registers for call backs. Most obviously menu selections,
but also selecting a tool, clicking on a button, opening a document,
changing page etc. Also it can register an "idle" procedure to be run
when Acrobat is not busy, at intervals. Your plug-in code is run, by
Acrobat, at these moments.
Aandi Inston
Similar Messages
-
How to use the Embedded PDF plugin
Hi all,
I have installed a plugin Embedded PDF.
Does anyone know how to used this for printing an interactive report??Have you read the documentation? It is very clear, when reading how to implement the plugin, how it generates your PDF.... You have to copy the select that you are using in your report to the plugin...
Thank you,
Tony Miller
Webster, TX
Never Surrender Dreams!
JMS
If this question is answered, please mark the thread as closed and assign points where earned.. -
How to use outside Class in packed library plugins
I have found the very useful article from Michael Lacasse (https://decibel.ni.com/content/docs/DOC-19176) on how to use packed library as plugins. This approach makes the most sense when you try to distribute additional code after your executable has already been installed.
My problem is that when I try to use a class from the main code in a plugin, the plugins won't work anymore. Ideally, I would have liked the parent plugin-interface to inherit from a class used in the main code, or using the class as an input parameter of the plugin would be the next best thing.
I got several errors, some at execution time (#1448) or at edit time ("This VI does not match other VIs in the method: connector pane terminal(s)"). I have settled to use clusters to pass data to the plugins.
My question is: Is it possible to use a class defined in the main code in a packed-project-library, either inherited or as a parameter? If yes, do you have any example?
Marc Dubois
HaroTek LLC
www.harotek.com
Solved!
Go to Solution.I should point out that it's important to use the copy THAT'S IN THE PPL, *-NOT-* the copy from your source.
It will compile if you mix them together, but they aren't the same object, and won't share data.
You should never refer to your source code for the class, except to build the PPL.
(Consider using a separate project, to avoid temptation).
Steve Bird
Culverson Software - Elegant software that is a pleasure to use.
Culverson.com
Blog for (mostly LabVIEW) programmers: Tips And Tricks -
My iphoto quites unexpectedly everytime I open it and says closes while using the eOkaoFr.dylib plugin. Does anyone know how to fix this? iphoto won't stay open for more than 1 minute at a time. Help anyone?
Is there a crash log? If so post the first 100 or so lines o fit
Do you know what the ofending plugin is? and where it came from?
LN -
How to use jsp:plugin type="applet" in jsp
Hi ,
I have a JSP File.
How to use jsp:plugin tag in that.
When I specify the file name in code="applet.class" Then it is giving an error saying that It could not find the class.
What is the solution for this.its not working.. it shows exception class not found exception.
i have placed the jsp and applet class in the same folder. but its not working.
jsp file path : OracleSpatial\mypackage\webmap.jsp
applet class : OracleSpatial\mypackage\demoApplet.class
demoApplet class inside package "mypackage".
code inside JSP is :
<jsp:plugin type="applet"
code="mypackage.demoApplet.class" width = "100%" height = "100%" >
</jsp:plugin> -
How to use Amplitube plugin?
I installed Amplitube Live, put it in the Audio/plugins/components folder and have no idea how to use it in GB. I want to see what it will do to harmonica.
I tried another IK product, a demo, Sampletankfree, and got nowhere with that either. IK says to load it as a virtual instrument. What am I missing?
Thanks
AlanHi Alan
I have Amplitube and have no problem using it. There are 2 parts of Amplitube, a stand alone app and a plug-in version. When you installed Amplitube did it give you a choice of where to install the plug-in and what type of plug-in did you want to install? AU, VST etc. When you say I put "it" in the Audio?plugins etc folder...Did you put the application there or the plug-in? The plugin has a component. tag on it. See if Amplitube.component is is your Library/Audio/plugins/components. If it is then when opening GB open up a real instrument track. Double click on the track. Then goto the effects section and click on the first open area under compressor and a list of available AU plugins should be available. Select Amplitube and click on the pencil tool and you should be in business. All of the Amplitube effects and cabs should be there.
Good Luck
Bill -
How to use smart view plugin in firefox 2.0
Can anyone help me in installing and then how to use it in Firefox 2.0
Hi,
I am not sure about a plugin I always thought that smartview was for Microsoft Office and is accessed through Excel, Word, Powerpoint.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to use trigger/plugin in DSEE 6.3.1
Hi All,
I have DSEE 6.3.1 installed and would like to setup an trigger whenever an application user changes some attributes in LDAP, I googled and came across we can use triggers but not sure how to use those. Is triggers are same as plugins or one of the builtin plugin provide trigger functionality?
The requirement is- Whenever an application owner changes any attribute in LDAP I want to set an trigger and get that changed value in a plain text file for audit purpose. The trigger should work post commit and not pre commit just want to confirm the changes as been written in LDAP.
Found following plugins available in DSEE 6.3.1-
7-bit check
ACL Plugin
ACL preoperation
Binary Syntax
Boolean Syntax
CLEAR
CRYPT
Case Exact String Syntax
Case Ignore String Syntax
CaseExactMatch Plugin
Class of Service
Country String Syntax
DES
DSMLv2-SOAP-HTTP
Distinguished Name Syntax
Generalized Time Syntax
Integer Syntax
Internationalization Plugin
MemberOf Plugin
Monitoring Plugin
Multimaster Replication Plugin
NS-MTA-MD5
ObjectDeletionMatch
Octet String Syntax
Pass Through Authentication
Postal Address Syntax
RMCE
Replication Repair
Retro Changelog Plugin
Roles Plugin
SHA
SSHA
State Change Plugin
Strong Password Check
Telephone Syntax
URI Syntax
chaining database
gle
ldbm database
pswsync
referential integrity postoperation
subtree entry counter for departments in domains
subtree entry counter for domains within a domain
subtree entry counter for mail lists
subtree entry counter for nested departments
subtree entry counter for total domains
subtree entry counter for users
uid uniqueness
value counter for departments
value counter for mail lists
Request your help in this issue.I am trying to use the regular ldapsearch command from commandline and not any C/Java code, like-
ldapsearch -D "cn=directory manager" -p 1389 -h localhost -w abcd1234 -r -C PS:any:1:0 -b dc=abc,dc=com ou=emp
despite using -r and -C option it just comes out displaying below entries
ou=emp,dc=abc,dc=com
ou=emp
objectClass=top
objectClass=organizationalUnit
also tried with below command -
ldapsearch -D "cn=directory manager" -p 1389 -h localhost -w abcd1234 -r -C PS:any:1:0 -b dc=techm,dc=com objectclass=person
it displays long list and just comes out, not sure why its not doing the persistent search after using -r and -C options.
request you to give some good idea on this. -
How to use Apple mpeg2 plugin (20$) + Streamclip (free)
I have Apple mpeg2 plugin + Streamclip on my computer, and for the life of me I can't figure out how to use the two to open my DVD in imovie!
Help~Ooops! I had a copy of QTKirk's explanation positioned under the Apple link (didn't notice the source!), and thought that both were connected. Here's his explanation:
"Read the FAQ page so you understand completely before you buy.
Install this new software [Apple MPEG2 Playback] and quit and relaunch QT Player (if running).
Open QT Player and then insert your DVD. Quit DVD Player if it starts.
From the "File" menu of the QuickTime Player choose "Open File". Navigate to the DVD and its VIDEO_TS folder and click OK. Your file should now be playing in QuickTIme Player.
QuickTIme Pro can't edit or export this file with audio. It can't be imported into iMovie until it is converted.
Download and install MPEG Streamclip (free).
Open MPEG Streamclip, navigate to your DVD and choose the VIDEO_TS folder. Click OK and it will open in Streamclip.
Choose "Export" and pick DV Stream. Wait for the conversion to finish. It will make a new file (you name it).
Open iMovie and "Import" this new .dv file and make your edits, etc. "
It may be of use to the OP.
Thanks, Sue:-) -
How to use javascript code in a plugin ?
Hi,
I'd like to use javascript in my plugin but after reading the JS API reference, i still don't understand where the code should be placed, and to call it from my plugin.
I'm quite new in Acrobat SDK and developping applications in Acrobat using Javascript, so I hope it's not a dumb question...>is there a way i can call javascript without security checking?
It wouldn't be security if you could just bypass it. Did you read all
the security notes? You might be able to do something with trusted
functions, but I'm not sure how that would integrate with a plug-in.
Aandi Inston -
How to use an own plugin to add 3d-content
Hi,
I have started to develop a plugin for Acrobat 8.0 that will add some kind of 3d-content to an existing model. I tried somewhat, but I face the problem that I can't find out how to use the plugin in Acrobat with Javascript. I added the .api file in the folder Acrobat/Plugins and the plugin is loaded.
But I can't find out how to use the methods of the plugin. I always get the error: 'can't found [methodname]'. Do you need to use some kind of prefix, or whatever. Perhaps this is a newbie question, but I can't find out it in the documentation.
Any help will be fine!
Regards,
Ewout> I face the problem that I can't find out how to use the plugin in Acrobat with Javascript.
That's right. You can't.
>
>But I can't find out how to use the methods of the plugin.
You cannot use the methods of a plug-in. They are for its own internal
use.
A plug-in registers for call backs. Most obviously menu selections,
but also selecting a tool, clicking on a button, opening a document,
changing page etc. Also it can register an "idle" procedure to be run
when Acrobat is not busy, at intervals. Your plug-in code is run, by
Acrobat, at these moments.
Aandi Inston -
How to use Service Broker, where and when we gonna use it.
Hi all,
I have task to implement SQL service broker for some insert statement, am bit confused where i start and how to implement like it may in Database or Server side(ASP.Net- c#), some where.
What the main advantage of using SQL Service broker?
Thanks,
Jai.There is more than one place where Service Broker fits in. Generally, one can say that Service Broker permits you to implement things asynchronously. For instance, when a row is updated in a table a mail should be sent to someone. Rather than having a trigger
that sends the mail on the spot, the trigger could post a message on a Service Broker queue. Then there could be an activation procedure which reacts to this message and composes and sends the mail. This activation can be in the same database - but it can
also be on a completely different server which does not even have a direct connection to the actual server.
Activation can also be external. That is, there is an application that polls the queue, and again this could be on an other server, and when there is a message in the queue the application processes it.
Roger Wolter's book is an excellent introduction to Service Broker:
http://www.amazon.com/Rational-Server-Service-Broker-Guides/dp/1932577270/ref=sr_1_1?ie=UTF8&qid=1420025225&sr=8-1&keywords=Roger+Wolter+service+broker
Also, don't overlook Remus Rusanu's blog, which is an excellent resource for development patterns with Service Broker:
http://rusanu.com/?s=service+broker
Both Roger and Remus worked on the development of Service Broker, so they know what they are talking about.
Erland Sommarskog, SQL Server MVP, [email protected] -
How to use third party plugin with FCP, I'm lost...
Hello,
I need informations about how to use plugins with FCP.
I do edit mostly classical concerts. I'd like to do basic audio post prod, without swaping between Soundtrack and FCP.
I need two simple things : add reverb (the built in reverb is really bad), and enhancer. So I looked for specialised third party audio plugins, but I couldn't manage to find something that work for me...
- Do FCP support VST plugins ? How to install them ?
- I tried a few audio units plugins. It works, but I couldn't get a friendly visual interface, like VST effects racks. Is it possible in FCP ?
- does anybody know a good reverb plugin with a friendly interface compatible with FCP ?
Please help, I'm lost !
EmmanuelI need two simple things : add reverb (the built in reverb is really bad), and enhancer.< </div>
What you NEED is a better recordist at the concert, someone who understands the peculiarities of your specific video deliver plans.
Soundtrack Pro is right up there with Motion in its impossible-to-understand interface paradigm shift away from industry standard tools. However, if you are in the position of being a sound editor, you must find a tool that works for you. STP might not be the one, certainly isn't for me. You could always try Logic. Yeah, good luck with THAT.
bogiesan -
How to use iMovie plugins?
I have recently started working with iMovie, and would like to use a special effects plugin to add "magic effects". I followed instructions to add the plugin i downloaded to the Plugin folder for iMovie, but how do i edit with the effects? I have a MacBook Air latest version and I would like to use the plugin in iMovie, because it is supposed to be comparable- and yes it works with the version I have. What do i click on to access the effects plugin while using iMovie? please help.
Here are a couple of good places to start:
https://www.apple.com/support/mac-apps/imovie/
http://www.macworld.com/article/2053681/getting-started-with-imovie.html
Also, if you have the app open, go to Help in the file menu and click on iMovie help. -
How i use adobe audition 6 as a plugin?
how i use adobe audition 6 as a plugin?
...and exactly what you do mean by "plug in" in this context. I have several items of software (mainly live sound playback) that allow me to specify what I want to use for audio editing and, of course, I have Audition specified in that box.
Maybe you are looking for
-
How to send job postings to multiple third party sites using the XML output
Dear Friends, We are Implementing Irecruitment for our client, Client requirement is how can we send job postings to multiple third party sites using the XML output from i-Recruitment With regards Surya .
-
Re: How I would make the Toshiba AC100 successful
Hi All, I post my ideas for improvements here, maybe someone from Toshiba reads this. The original blog post is here: http://soltesza.wordpress.com/2011/05/09/how-i-would-make-the-toshiba-ac100-successful/ Please feel free to contribute here or at th
-
Did I just screw myself? HDV Questions....
Hi guys, I just recently purchased 2 Sony HDR-HC1. My wife and I are event videographers and planned on preparing for the future and getting HDV cams since we needed new ones anyways. My questions follow: 1) If I record in HD, how easy is it going to
-
Changing language of text of field in screen painter
Hi All , Can we maintain the text of field in screen painter in different language . For ex: i have same screens in different languages . When i am changing the text in EN language the same text in EN only i am getting in other languages . How can
-
Receiving error message corrupt file
When I try to open Itunes on my PC (Vista) receiving an error message that my file is corrupt or needs to be reinstalled. Can get into Itunes on my IPAD. If I uninstall will I lose my library? I have not backed it up on naything external.