How to use BAPI Program for change workcenter in co02?

Hi Abapers.
       Anybody please tell me how to change the workcenter in CO02 using BAPI Programe.
      Please give me sample of this.
       I will give urs reward of points.
Thanks
Regards,
S.Muthu.

Hi,
Use the Function module CR_WORKCENTER_UPDATE
for workcenter change.
It is an update function module so you have to call it in update mode with a COMMIT statement to trigger it.
CALL FUNCTION CR_WORKCENTER_UPDATE IN UPDATE TASK
exporting...
imporing..
COMMIT WORK.
Note: only after the commit statement the function module will be called in update mode.
Regards,
Raj.

Similar Messages

Hello ! pls give some ti[ps how to use bapi's for data uploading?

hello !
pls give some ti[ps how to use bapi's for data uploading?
regards,
Arjun

Hi,
See the below report extract:
where it_data is having uploaded data.
LOOP AT it_data INTO wa_data.
 line_count = sy-tabix.
 "Date Validation
 CONCATENATE wa_data-uplft_date4(4) wa_data-uplft_date2(2) wa_data-uplft_date+0(2)
 INTO wa_data-uplft_date.
 "READ TABLE it_ekko INTO wa_ekko WITH KEY lifnr = wa_data-vendor.
 LOOP AT it_ekko_temp INTO wa_ekko_temp WHERE lifnr = wa_data-vendor.
 IF wa_ekko_temp-kdatb <= wa_data-uplft_date AND wa_ekko_temp-kdate >= wa_data-uplft_date.
 MOVE-CORRESPONDING wa_ekko_temp TO wa_ekko.
 APPEND wa_ekko TO it_ekko.
 ENDIF.
 ENDLOOP.
 "IF sy-subrc = 0 AND wa_ekko-kdatb <= wa_data-uplft_date AND wa_ekko-kdate >= wa_data-uplft_date.
 LOOP AT it_ekko INTO wa_ekko.
 wa_data_header-pstng_date = wa_data-uplft_date.
 wa_data_header-doc_date = sy-datum.
 wa_data_header-bill_of_lading = wa_data-bill_of_lad.
 wa_data_header-ref_doc_no = wa_data-del_no.
 CONCATENATE wa_data-header_text1 '-'
 wa_data-header_text2 '-'
 wa_data-header_text3 '-'
 wa_data-header_text4
 into wa_data_header-HEADER_TXT.
 IF wa_data-indicator = 'Y'.
 wa_data_item-material = '000000000000200568'.
 ELSE.
 wa_data_item-material = '000000000000200566'.
 ENDIF.
 LOOP AT it_ekpo INTO wa_ekpo WHERE ebeln = wa_ekko-ebeln AND matnr = wa_data_item-material.
 "Collect Item Level Data
 wa_data_item-plant = '1000'.
 wa_data_item-stge_loc = '1001'.
 wa_data_item-move_type = '101'.
 wa_data_item-vendor = wa_data-vendor.
 wa_data-qnty = wa_data-qnty / 1000.
 wa_data_item-entry_qnt = wa_data-qnty.
 wa_data_item-po_pr_qnt = wa_data-qnty.
 wa_data_item-entry_uom = 'KL'.
 wa_data_item-entry_uom_iso = 'KL'.
 wa_data_item-orderpr_un = 'KL'.
 wa_data_item-orderpr_un_iso = 'KL'.
 wa_data_item-no_more_gr = 'X'.
 wa_data_item-po_number = wa_ekpo-ebeln.
 wa_data_item-po_item = wa_ekpo-ebelp.
 wa_data_item-unload_pt = wa_data-unload_pt.
 wa_data_item-mvt_ind = 'B'.
 APPEND wa_data_item TO it_data_item.
 CLEAR wa_data_item.
 ENDLOOP.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = 'X'
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 READ TABLE return INTO wa_return WITH KEY type = 'S'.
 IF sy-subrc <> 0.
 DESCRIBE TABLE return LINES sy-tfill.
 IF sy-tfill = 0.
 CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
 EXPORTING
 goodsmvt_header = wa_data_header
 goodsmvt_code = goodsmvt_code
 testrun = ' '
 TABLES
 goodsmvt_item = it_data_item
 return = return.
 CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
 EXPORTING
 WAIT = 'X'
 IMPORTING
 RETURN =
 ENDIF.
 ENDIF.
 LOOP AT return INTO wa_return.
 WRITE: 'Messsage TYPE ', wa_return-type,
 /,'ID ', wa_return-id,
 /, 'Number ', wa_return-number,
 /, 'Message ', wa_return-message,
 /, 'Long Text ', wa_return-message_v1,
 wa_return-message_v2,
 wa_return-message_v3,
 wa_return-message_v4,
 /, 'Failed at line', line_count.
 ENDLOOP.
 CLEAR: wa_ekko, wa_ekpo, wa_data, it_data_item[], wa_data_header.
 ENDLOOP.
Reward if useful!

How to use Bapi BAPI_ACC_DOCUMENT_POST for g/l account document posting

Hi all,
I am using BAPI_ACC_DOCUMENT_POST bapi for g/l account documents posting.as I am first time using BAPI in my program.can anyone give details about how to use this BAPI for document postings.what importing parameters need to be passed , which exporting parameters need to be passed and which tables need to be used.
Thanks in advance.
Regards,
Harshada

Moderator message - Please search before asking - post locked
Rob

How to use BAPI extension for updating field which is not in BAPI stracture

I am doing a conversion for control cycle create. The data is maintained in DB Table "PKHD". i have to update 12 fields threre through BAPI "BAPI_KANBANCC_CREATE". there are 11 fields in BAPI structure. but 1 field called"BERKZ" is not there . How can i update it through EXTENSION.

Hi ,
in the bapi extension check one structure with name BAPIPAREX will available..
you need to pass custom structure in that..
ands conactenate 12 field of your structure and pass in to value1 in bapirex structure and append.
go to se11 and enter >bapiparex> check where it is used -->see the zprogram and check how it is used the add your code according to that..
Regards,
Prabhudas

How to add new line item using BAPI BAPI_CONTRACT_CHANGE for contract-ME32K

HI Experts,
how to add new line item using BAPI: BAPI_CONTRACT_CHANGE for existing contract.
Requirement:
Already the contract having two line items using ME31K.
Custom program has to add new line items in existing contract.
Thanks,
Sendil

I got the solution:
We can do like this:
1. Get all details using details, BAPI_CONTRACT_GETDETAIL.
2. After getting results, append new line item. Then use your BAPI.
Check this posting program.. where this bapi is used, use the same coding technique.
IDOC_INPUT_PURCONTRACT_CHANGE

How to use BAPI function module for maintaing product type to material

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

Hi,
Can you pls suggest me how to use BAPI Fuction module CCAP_REV_LEVEL_MAINTAIN
for maintaining the product type for the material using change number.
Pts will be rewarded.
Best Regards,
Padhy

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

How to make a program for backgroung processing used servlet

how to make a program for backgroung processing used servlet

well i need the coding part written in servlet ,in which servlet is always ready for accepting a client request.

How to use Extensionin, Extensionout FOR BAPI ENHANCEMENT

Hi,
I need to do the enhancemen for BAPI. I don't know how to do it.
if there is any good procedure plz give me.
Thanks in Advance,
NV

Hi ,
In the EXTENSIONIN param Structure should be BAPI_TE_XXXXX(Which has the custom fields) .
If you don't know one in se11 search with BAPI_TE_* , I am sure you will one which has ur fields.
And then in Value part1 should have your data.
For Ex. you want to send company code , asset no.
first4 will be your comp code , Next 12 will ur Asset no .
Please revert back if more help required.
Also Check for similar work
[Thread|Re: How to use BAPI]
Rhea.

Please Help me How write the BDC program for the MIGO inbound Delivery

Please help me how to write bdc program for the MIGO Inbound Delivery in 4.7EE Version. Please help me.
Not in LSMW. Required call transaction or Session Method. Please help me.
Mohan

Run transaction BAPI . Select Logistics Execution/Shipping/InboundDelivery/SaveReplica.. You can use function module BAPI_INB_DELIVERY_SAVEREPLICA in your ABAP program.

How to use 2 GL for loss made on asset retirement w/o revenue ?

how to use 2 GL for loss made on asset retirement w/o revenue.
hello everyone
i have some trouble.
my company want to use 2 GL account for asset retirement
example some time use GL 6500001 some time use 6500002
in standard configuration AO90 , field loss made on asset retirement w/o revenue, there is only one field.
so i can use only one G/L.
it' s not good if i must to change configuration (and transport request )every time that user need to change GL.
now i got one idea.
i know that table T095 keep account determinaton and GL account data.
so if i make program that change data from table T095 directly. i donot need to change config everytime.
but i am not sure that this way will make impact other standard program or not.
i will wait for better idea from everyone.
please help.

Substitution consist of several steps each with two parts:
1- Prerequisite
2- Replacement
If the prerequisite is satisfied (TRUE), substitution (Replacement) is performed.
Transaction Code: OBBH.
Thank you
Javed

How to use the program RHMOVE30

Dear Gurus,
One of our consultant has created organisation structure in one client of development system and wants to transport the same to another client in the same system and also to another system Quality.
Came to know that by using program RHMOVE30 it can be done, but can anyone tell me how to use this program, I mean what are the inputs to be given and how to get the transport request.
Regards,
Sharath

Hi Ali,
Yes, normally transports will be moved from DEV to PRD and hope the same configuration is there in u r setup. But if you want to move the transport from PRD to DEV there is a way, but for this you may need to open the client restriction in u r production system (which is not recommended or u have to do this when no user is logged on to the production system).
First make changes in the client settings for enabling transport request generation and execute the program RHMOVE30 and give u r inputs and generate a transport request. Once the request is generated it wil create two files(cofile and datafile folders) in trans folder (/usr/sap/<SID>/trans or <drive>:\usr\sap\<SID>\trans)
Based on the request number copy the cofile and data file from production system and paste it in the same path in development system. Then login to development system from SAP and go to the import queue of development server and then choose EXTRAS->OTHER REQUEST->ADD and this will add that request to development queue and u can transport it normally.
Hope this clarifies. Award points if helpful
Regards,
Sharath

How to know print program for SAP Script

Hi friends,
how to know print program for SAP Script form name ?

Hi ,
You can use the following code changes in the layout & see..
You have to create a program Z_BC460_EX4_HF for that..
/:PERFORM GET_NAME IN PROGRAM Z_BC460_EX4_HF
/: USING &CUST&
/: CHANGING &NAME&
/:ENDPERFORM.
Dear &NAME&
The ABAP routine could be defined as follows:
IMPORTANT: The structure itcsy must be used for the parameters.
REPORT Z_HENRIKF_SCRIPT_FORM .
tables scustom.
form get_name tables in_tab structure itcsy
                       out_tab structure itcsy.
read table in_tab index 1.
select single * from scustom
    where id = in_tab-value.
if sy-subrc = 0.
    read table out_tab index 1.
    move scustom-name to out_tab-value.
    modify out_tab index sy-tabix.
else.
    read table out_tab index 1.
    move 'No name' to out_tab-value.
    modify out_tab index sy-tabix.
endif.
You could also fill the ouput parameter table this way
   READ TABLE out_par WITH KEY 'NAME1'.
   out_par-value = l_name1.
   MODIFY out_par INDEX sy-tabix.
endform.

How to use (to program) a Scheme in Xcode? (novice programer needs help!)

How to use (to program) a Scheme in Xcode?
i have been using Aquaemacs (GNU emacs) with Guile extensions. but i really would like to do all that in Xcode. is it possible? thanks.

I believe that Scheme is not a language natively supported by Xcode. Maybe there is a way to write a plugin for it, but I don't really think so and in particular I haven't seen one for LISP or Scheme.

How to use bapi response in XI

HI ALL,
Can any one suggest me, how to use bapi response in XI as a sender.
I m using bapi BAPI_BCA_BANKSTATEMENT_EXECUTE , I am executing this bapi manually ,but want to use this BAPI RESPONSE in XI as a sender and map it with receiver.
can i have any idea about how to do it, or can i have the idoc which is used by this bapi BAPI_BCA_BANKSTATEMENT_EXECUTE.
THANX
HONEY

Hi Honey,
Have a look at these
-Configuring the Sender RFC Adapter - step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
-Troubleshooting - RFC and SOAP scenarios
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009
-sender RFC (forum thread)
Is it possible to use the RFC sender adapter for asynchronous calls?
Regards,
Sreenivas

How to use BAPI Program for change workcenter in co02?

Similar Messages

Maybe you are looking for