How to use dbo procedure to execute for different schema?
I am using SQL Server 2008 R2, I have a schema [dbo],
and in that schema, I have created a stored procedure dbo.GetAccount:
CREATE PROCEDURE dbo.GetAccount
AS
BEGIN
select * from tblAccountNet
END
GO
Then, I have created a schema [ABC] with
user named UserABC.
Now, I would like to login with UserABC and
execute dbo.GetAccount for
schema [ABC] to
get all user of it and don't want to change code of dbo.GetAccount.
So, how can I do?
Thanks for your help.
Thank you everyone.
But, I don't want to change procedure dbo.GetAccount because in face, I have more 100 procedures. I think of two solutions:
1. Create another stored procedure in
[dbo] schema, and use it to read all other procedure to list all table used in procedure and assign them with schema
[ABC]
2. Create
a stored procedure to change schema of all table in every procedure
But I really don't know how to do it. Please help me.
Thanks so much.
Similar Messages
-
How to use decode to calculate sum for different date range
I'm stuck with decode() function:
I have a table like this:
(project_id, approve_date, value, builder_code)
I want to write a SQL query to get sum of values for different month of the approve_date, and group by builder_code)
The result is like this:
builder_code Sum(value)_Sep-03 Sum(value)_Oct-03 Sum(value)_Nov03
1001 1,299 1,322 990
1002 3,332 1,222 333
I tried to use decode for this question but could not get the answer.
Thanks a lotI don't think you need a DECODE() here. I'd do something like this-
create table builder (
project_id number,
approve_date date,
value number,
builder_code number
insert into builder values( 1, to_date('09-01-2003', 'MM-DD-YYYY'), 100, 990 )
insert into builder values( 2, to_date('09-03-2003', 'MM-DD-YYYY'), 150, 990 )
insert into builder values( 3, to_date('09-05-2003', 'MM-DD-YYYY'), 250, 990 )
insert into builder values( 3, to_date('09-05-2003', 'MM-DD-YYYY'), 250, 333)
SELECT sept.builder_code, sept.sept_sum, oct.oct_sum
FROM (SELECT builder_code, sum(value) sept_sum
FROM builder
WHERE approve_date >= to_date('09-01-2003','MM-DD-YYYY')
AND approve_date < to_date('10-01-2003','MM-DD-YYYY')
GROUP BY builder_code) sept,
(SELECT builder_code, sum(value) oct_sum
FROM builder
WHERE approve_date >= to_date('10-01-2003','MM-DD-YYYY')
AND approve_date < to_date('11-01-2003','MM-DD-YYYY')
GROUP BY builder_code) oct
WHERE oct.builder_code(+) = sept.builder_code
BUILDER_CODE SEPT_SUM OCT_SUM
333 250
990 500Justin
Distributed Database Consulting, Inc.
www.ddbcinc.com/askDDBC -
How to use Purch. Info Record, for different Valuation Types ?
Hi All,
While doing Split Valuation,
I have created three valuation types - say, M1,M2,M3. for material M.
Now, I want to create Info record for material M and Vendor V1.
when i go to me11, system is allowing me to create info record for M and V1 once only,
in Purchasing Organization View, I'm getting the Valuation type field,
but can't entering 3 prices for 3 valuation types,
such as in Material Master.
Can any one help me regarding this....
Thanks,
Anand.if u create po with info update indicator then u can use your valuatiion type in po for whihc there is no ifo recrod existing then system willl createt one
but actually the price will get stored in the price oder history not exactly in the pir -
How to use Stored Procedure Call in Sender JDBC adapter
Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
XierHi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !! -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
-
How to use one commandButton to execute two task in JSF
I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
The code of the inputText:
<h:inputText value="#{bindings.ProjectNumber.inputValue}"
id="pn"
size="10"
required="#{bindings.ProjectNumber.mandatory}">
The code of commandButton:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}"/>
The managed bean is “findInspector”. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}">
<h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
</h:commandButton>
But it was not work
Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two task in JSF.
Thank you
WaheedYes I did
<managed-bean>
<description>The bean for get project No</description>
<managed-bean-name>projectBean</managed-bean-name>
<managed-bean-class>
mcscm.model.ProjectBean
</managed-bean-class>
<managed-bean-scope>request</managed-bean-scope>
<managed-property>
<property-name>bindings</property-name>
<value>#{bindings}</value>
</managed-property>
</managed-bean>
Also I changed the method in the managed bean as follows:
public String commandButton_action() {
FacesContext fctx = FacesContext.getCurrentInstance();
ValueBinding vb = fctx.getApplication().createValueBinding("#{bindings}");
DCBindingContainer dcb = (DCBindingContainer) vb.getValue(fctx);
OperationBinding operation = (OperationBinding) dcb.get("projectNumber");
operation.execute();
return null;
where projectNumber is my method in the java class of the application module "TaskInformationImpl". I made this method to be accessed from outside of ADF BC.
I just create a sample code for projectNumber method for testing only as:
public void projectNumber (String data){
System.out.print(data);
In the page Pagedef file I added this :
<methodAction id="projectNumber"
InstanceName="TaskInformationDataControl.dataProvider"
DataControl="TaskInformationDataControl"
MethodName="projectNumber" RequiresUpdateModel="true"
Action="999" IsViewObjectMethod="false">
<NamedData NDName="data" NDValue = "#{bindings.ProjectNumber.inputValue}" NDType="java.lang.String"/>
After I did all of this I get a new error like:
javax.faces.FacesException: #{projectBean.commandButton_action}: javax.faces.el.EvaluationException: java.lang.ClassCastException: oracle.adfinternal.view.faces.model.binding.FacesCtrlAttrsBinding cannot be cast to oracle.adf.model.OperationBinding
Is it very difficult to do this in JDeveloper?. yes ADF BC provide me a lot of facilities, but when I want to do a specific task I face a lot of troubles -
How to use Stored Procedures in form 6i Blocks
Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts -
HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)
Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
rameshHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use stored procedures in DIAdem and Can the stored procedures be used to return values?
Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiyaHi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc 28 KB -
How to use Stored Procedures in JDBC sender side and receiver side
Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
SooryaHi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag -
How to use 'oprofc' procedure?
How to use 'oprofc procedure'?
I don't find this program in JDEVELOPER2.0 directory.
is it necessary to launch 'oprofc' to use some oracle-specific
features (form exemple: CLOB)
nullDavid,
Please also see my reply to your other query about SQLJ and
CLOBs. It is my understanding that this script is only necessary
for command line SQLJ operations, and I don't believe it is still
used with 8.1.
Because JDeveloper handles the SQLJ translation for you, we do
not provide the command line utilities. They should be available
with either your server installation or the Oracle Client
distribution if you would like to use them.
-L
David DUPONT (guest) wrote:
: How to use 'oprofc procedure'?
: I don't find this program in JDEVELOPER2.0 directory.
: is it necessary to launch 'oprofc' to use some oracle-specific
: features (form exemple: CLOB)
null -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
How to use the same email address for outgoing email on two iPads?
How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1
Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H. -
How to use one commandButton to execute two tasks in JSF
I have a form in JSF page which contains different faces components. These faces bind to ADF BC to insert one row in the database when the user press commandButton. Also I need to bind the value of one inputText in that form to managed bean to execute another task in the application when the user press the same commandButton.
The code of the inputText:
<h:inputText value="#{bindings.ProjectNumber.inputValue}"
id="pn"
size="10"
required="#{bindings.ProjectNumber.mandatory}">
The code of commandButton:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}"/>
The managed bean is �findInspector�. I tried to insert inputHidden inside commandButton tag and assign the value of the inputText to the inputHidden as follows:
<h:commandButton actionListener="#{bindings.Commit.execute}"
value="Save"
disabled="#{bindings.Commit.actionEnabled}">
<h:inputHidden value="#{bindings.ProjectNumber.inputValue}" binding="#{findInspector.project}"/>
</h:commandButton>
But it was not work
Please how can I write the code to use the value of the inputText more than one time in the JSF(one to insert one row by using ADF BC and another to use the same value to bind to a managed bean) and how to use one commandButton to execute two tasks in JSF.
Thank you
WaheedJust dopublic void execute() {
anotherAction(inputValue);
I guess those articles might be interesting about passing params and the usage of inputHidden and also about using datatables:
http://balusc.xs4all.nl/srv/dev-jep-com.html
http://balusc.xs4all.nl/srv/dev-jep-dat.html -
How to use the field of 'FM for Determining Address' in report RSWUWFML2?
Dear gurus,
In the selection screen of report RSWUWFML2, there is a field named 'FM for Determining Address' . How to use it? Is it for sending e-mail to specific e-mail addresses?
Regards
DavidI will test soon. Thanks to all involved.
Maybe you are looking for
-
How to get Column Browserfor iPod Touch to work in iTunes 11
The Column Browser for an iPod Touch device displayed correctly in iTunes 10 but now seems disabled in iTunes 11. Is there anyway to enable the Column Browser for an iPod Touch device in iTunes 11? I use the Column Browser extensively for the Device
-
Contacts creates duplicates and loses data
Contacts has been causing problems: I created a new entry; this created over 36,000 duplicates. I entered data into the Notes section; this seemed to save - but when I returned the following day, it had disappeared and reset to an earlier version. Th
-
What do you think I should do?
Okay, here I go... I bought a MBP back in June 22. I returned that one because it was giving me problems, one KP (Kernel Panic) per day, the speakers sounded awful (the day I took it back they didn't even work!!) It was a week 21. Apple swapped it ri
-
Hello, I am from China, is a preview of your company's 650 CDMA users in China, As the two mobile communications operators China Unicom, one of the companies has a huge CDMA network its coverage rate has reached the Chinese mainland territory of abov
-
BAdI SPC_POSTING_CONTROL Copying condition records to related materials
People of the Forum I salute you I'm spec'ing an enhancement to create condition records using the data entered by the user for a reference material. The solution we're looking at is to implement a BAdI in transaction VKP1 called 'SPC_POSTING_CONTROL