How to use forecast functions correctly?... Program doesn't work.

Have anybody tried to make some forecast using the example programs Autofcst, QueryAll, etc. (Oracle Services Language Help)? I took these programs as a templates and tried to make my own over our database. First the simple ones. But It didn't work. Are there any special required properties of time dimension?
Thanks.

Hi,
I manage to exec forecast inspired by the examples. It's up to you, how you construct your time dimension. You must define the custom measure where the forecasted data will be stored. It's better when the CM has the same structure as the measure with source data (sparse, composite, etc.). I also created the next two CMs for seasonal and seasonal smoothing.
I had to set histperiods and it worked. But I let the approach 'appauto', the OLAP engine choose the best method by itself. If I try to change the method, especially to SESMOOTH, DESMOOTH and HOLT/WINTERS, than made the report of the CM forecast, the output was wrong.
Have anybody tryied to work with the exponencial smoothing or the most difficult method H/W? Which of the parameters should I set with the FCSET to have correct outputs, if I use APPMANUAL approach?
There are example of my FCSET and FCEXEC:
FCSET handle APPROACH app METHOD method HISTPERIODS histperiods NTRIALS trials PERIODICITY _periodicity
FCEXEC handle TIME time-dimension INTO custom-measure-forecast SEASONAL cm-seasonal SMSEASONAL cm-seasonal-smoothing BACKCAST source-measure
K*

Similar Messages

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why?   I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks.      LM

I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

How to Use this function

I am not sure how to call this Function correctly and how to pass the IN parameter, I am still new and learning, please help!
So far I have compiled it, and it compiled fine and saved it in my schema.
It is supposed to be able to calculate the compression ratio for say TABLE_1234 to see how much space it would save if
I used the COMPRESS option in 10G.
CREATE OR REPLACE function Y775.compression_ratio (tabname varchar2)
return number is
pragma autonomous_transaction;
-- sample percentage
pct number := 0.000099;
-- original block count (should be less than 10k)
blkcnt number := 0;
-- compressed block count
blkcntc number;
begin
execute immediate ' create table TEMP_UNCOMPRESSED pctfree 0
as select * from ' || tabname ||
' where rownum < 1';
while ((pct < 100) and (blkcnt < 1000)) loop
execute immediate 'truncate table TEMP_UNCOMPRESSED';
execute immediate 'insert into TEMP_UNCOMPRESSED select * from ' ||
tabname || ' sample block (' || pct || ',10)';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_UNCOMPRESSED' into blkcnt;
pct := pct * 10;
end loop;
execute immediate 'create table TEMP_COMPRESSED compress as
select * from TEMP_UNCOMPRESSED';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_COMPRESSED' into blkcntc;
execute immediate 'drop table TEMP_COMPRESSED';
execute immediate 'drop table TEMP_UNCOMPRESSED';
return (blkcnt/blkcntc);
end;
/

Ok, ok - so I have updated the function and it compiled, fine, but now nothing is returned, I thought that a number was returned ?
CREATE OR REPLACE function Y775.compression_ratio (tabname varchar2)
return number
AUTHID CURRENT_USER
is
pragma autonomous_transaction;
-- sample percentage
pct number := 0.000099;
-- original block count (should be less than 10k)
blkcnt number := 0;
-- compressed block count
blkcntc number;
begin
execute immediate ' create table TEMP_UNCOMPRESSED pctfree 0
as select * from ' || tabname ||
' where rownum < 1';
while ((pct < 100) and (blkcnt < 1000)) loop
execute immediate 'truncate table TEMP_UNCOMPRESSED';
execute immediate 'insert into TEMP_UNCOMPRESSED select * from ' ||
tabname || ' sample block (' || pct || ',10)';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_UNCOMPRESSED' into blkcnt;
pct := pct * 10;
end loop;
execute immediate 'create table TEMP_COMPRESSED compress as
select * from TEMP_UNCOMPRESSED';
execute immediate 'select
count(distinct(dbms_rowid.rowid_block_number(rowid)))
from TEMP_COMPRESSED' into blkcntc;
execute immediate 'drop table TEMP_COMPRESSED';
execute immediate 'drop table TEMP_UNCOMPRESSED';
return (blkcnt/blkcntc);
end;
/

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

How to use FPRINT32 function in MF cobol

Hi,
How to use FPRINT32 function to check the value of any buffer defined in MF cobol code.
When we tried, CALL FPRINT32 USING OUTPUT-FML
OUTPUT-FML is a buffer which is defined in our cobol code.
We are getting below error.
ld: 0711-224 WARNING: Duplicate symbol: p_xargc
ld: 0711-224 WARNING: Duplicate symbol: p_xargv
ld: 0711-224 WARNING: Duplicate symbol: .tpsvrdone
ld: 0711-224 WARNING: Duplicate symbol: .tpsvrinit
ld: 0711-224 WARNING: Duplicate symbol: TPSVRINIT
ld: 0711-224 WARNING: Duplicate symbol: .TPSVRINIT
ld: 0711-224 WARNING: Duplicate symbol: tpsvrinit
ld: 0711-224 WARNING: Duplicate symbol: tpsvrdone
ld: 0711-224 WARNING: Duplicate symbol: .userlog
ld: 0711-224 WARNING: Duplicate symbol: userlog
ld: 0711-224 WARNING: Duplicate symbol: p_xrcfg
ld: 0711-224 WARNING: Duplicate symbol: p_xrc
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
ld: 0711-317 ERROR: Undefined symbol: .FPRINT32
CMDTUX_CAT:1832: ERROR: can't execute cobcc -I$TUXDIR/include -L/lib -lpthreads -L/usr/local/opt/oracle/product/ostl133/lib/ -lclntsh -lrtl -lld -lm /lib/crt0_64.o -ldl -lc -lm -lpthreads -lodm -lbsd_r -lld -lperfstat -lm -lc_r -lpthreads /usr/local/opt/oracle/product/ostl133/precomp/lib/cobsqlintf.o /usr/local/opt/oracle/product/ostl133/lib/libclntsh.a -C linkcount=1024 -o BS-f804a.c -L${TUXDIR}/lib TPSVRINIT.o -brtl -qstaticinline -lcobatmis -ltux -lbuft -lfml -lfml32 -lengine -lpthread
Please help in this regard,
Thanks

Hi,
As far as I know there is no FPRINT32 function in the Tuxedo COBOL interface.
The ATMI COBOL Function Reference for the latest Tuxedo 11.1.1.2.0 release at
http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rf3cbl/rf3cbl.html shows FINIT, FINIT32, FVFTOS, FVFTOS32, FVSTOF, and FVSTOF32 as the only supported COBOL interface functions related to FML.
COBOL is better suited to dealing with the fixed record structure of views than with the variable record format of FML buffers. The COBOL interface offers functions to initialize and FML buffer and to convert an FML buffer to and from a VIEW so that preexisting services taking FML buffers as input or output parameters can be called, but the expectation is that the COBOL program will conver the FML buffer to a VIEW before accessing it.
It is possible to call the Tuxedo C interface Fprint32() function from COBOL using standard interlanguage calling conventions. Also, you may want to check with other developers on your project to see if someone may have already implemented such a function.
Regards,
Ed

How to use this function call function 'REUSE_ALV_COMMENTARY_WRITE' in alv

hi all
thanks in advance
how to use this function in alv programming
call function 'REUSE_ALV_COMMENTARY_WRITE'
why use and what purpose use this function plz tell me details
plz guide me
thanks

Hi
see this exmaple code where i had inserted a LOGO by useing this FM
*& Report ZTEST_ALV_LOGO
REPORT ztest_alv_logo.
TYPE-POOLS : slis.
*ALV Formatting tables /structures
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: gt_events   TYPE slis_t_event.
DATA: gs_layout   TYPE slis_layout_alv.
DATA: gt_page     TYPE slis_t_listheader.
DATA: gs_page     TYPE slis_listheader.
DATA: v_repid     LIKE sy-repid.
*ALV Formatting work area
DATA: w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_events   TYPE slis_alv_event.
DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
INITIALIZATION.
PERFORM build_events.
PERFORM build_page_header.
START-OF-SELECTION.
*perform build_comment.     "top_of_page - in initialization at present
SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
PERFORM build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program                = v_repid
      i_structure_name                  = 'BSID'
   i_background_id                   = 'ALV_BACKGROUND'
      i_grid_title                      = 'This is the grid title'
I_GRID_SETTINGS                   =
      is_layout                         = gs_layout
      it_fieldcat                       = gt_fieldcat[]
      it_events                         = gt_events[]
    TABLES
      t_outtab                          = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
FORM populate_for_fm USING p_row
                           p_col
                           p_fieldname
                           p_len
                           p_table
                           p_desc.
w_fieldcat-row_pos      = p_row.          "Row Position
w_fieldcat-col_pos      = p_col.          "Column Position
w_fieldcat-fieldname    = p_fieldname.    "Field name
w_fieldcat-outputlen    = p_len.          "Column Lenth
w_fieldcat-tabname      = p_table.        "Table name
w_fieldcat-reptext_ddic = p_desc.         "Field Description
w_fieldcat-input        = '1'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " populate_for_fm
*&      Form build_events
FORM build_events.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type = 0
    IMPORTING
      et_events   = gt_events.
READ TABLE gt_events
             WITH KEY name = slis_ev_user_command
             INTO ls_event.
IF sy-subrc = 0.
    MOVE slis_ev_user_command TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events
             WITH KEY name = slis_ev_top_of_page
             INTO ls_event.
IF sy-subrc = 0.
    MOVE slis_ev_top_of_page TO ls_event-form.
    APPEND ls_event TO gt_events.
ENDIF.
ENDFORM.                    " build_events
*&      Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
FORM user_command USING r_ucomm     LIKE sy-ucomm
                         rs_selfield TYPE slis_selfield.
READ TABLE gt_bsid INDEX rs_selfield-tabindex.
error checking etc.
SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDFORM.                    "user_command
*&      Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = gt_page
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
FORM build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
w_fieldcat-edit = 'x'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " build_fieldcat
*&      Form build_page_header
      gt_page is used in top of page (ALV subroutine - NOT event)
      *H = Header, S = Selection, A = Action
FORM build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
APPEND gs_page TO gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
APPEND gs_page TO gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
APPEND gs_page TO gt_page.
ENDFORM.                    " build_page_header

How to use Check Function Module???

Hi Friends,
How to use Check Function Module in Workflow???
My requirement is to trigger the workflow at the last line item of the Material Document.
Rewards for sure for helpful answer.
-Satish

Hi Satish,
You know, the real power of forums like these is the search functionality. First you locate the correct forum, you succeeded in that and then you locate the search field and type in your question. In your case "check function module"
I suggest you do this right away and be amazed at all of the answers about his topic. Maybe you'll even find some topic about exactly the same issue with a different solution than check function modules and on top of that you learn something this way. Talk about win-win situation
Kind regards, Rob Dielemans

How to use the function module ....

hi
how to use the function module ssf_function_module_name in smartforms

Hi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu

How to use reuse_alv_variant functions

helo experts can any one tell me how to use these function modules
REUSE_ALV_VARIANT_DEFAULT_GET,
REUSE_ALV_VARIANT_F4,
REUSE_ALV_VARIANT_EXISTENCE,
WHAT IS THE CS_VARIANTS PARAMETER IN THESE FUNCTION MDOULES.
HOW TO USE THAT?

REUSE_ALV_VARIANT_DEFAULT_GET
Text
     Read default layout (description only, w/o field catalog)
Functionality
     Provides the default variant for the list specified in the structure
     parameter CS_VARIANT of a program.
REUSE_ALV_VARIANT_F4
Text
     Display variant selection dialog box
Functionality
     Possible entries help, if the variant is defined explicitly as an input
     field on a screen. The selection must be specified by at least partially
     filling the parameter structure IS_VARIANT.
REUSE_ALV_VARIANT_EXISTENCE
Text
     Checks whether a display variant exists
<u>CS_VARIENTS holds the information about varients like:</u>
ABAP Program Name
Mgt. ID for repeated calls from the same program
Logical group name
User name for user-specific storage
Layout
Description for layout
Dependent variant entry vector
Functionality
     This function module checks the existence in the database of a display
     variant passed in the interface.

How to use Enhancement spot in program

Hi gurus,
now i am working ecc 6.0, so how to use Enhancement spot in program, can anybody explain step by step.
Rewarded with points.
Thanks
Naveen

Hi Naveen ,
Enhancement Spot are available.
Examples:
-End of Executable Program, Include, Function group, Dialog module
-Begin/End of Form routine / Function module / Method
-End of a structure
-End of Private/Protected/Public Section of a local class
If you want to create Implementation , You have to right click on yellow color line and gve Zxxx and save it in any
transport request under any dev class. Then you can write your own code and save it and activate it .
Later If you want to Transport it you need to transport this request.
Reqward if usefuil
Thanks
Jagadeesh.G

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones and it never worked. Does anyone has an idea how to solve the problem? Tks.

Hello, I just got an iPhone 4S and it seems that the bluetooth function in it doesn't work. I tried few times to pair it to other non Apple phones but it never worked. Does anyone has an idea how to solve the problem? Tks.

This is not a feature of iPhone, iPad or iOS.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone
devices/headsets, some keyboards, some peer-to-peer apps from the
app store and internet tethering where provided by the carrier.
Other than this it will not connect to a phone/computer/device. (thanks to ckuan for the wording)

How to use standard function keys as custom keys

how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.

Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks

How to use SQL functions in the queries

hey guys i wanna know how to use SQL functions in the queries is it possible or not .

Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n);

How to use this function in crm5.2 - /CEM/ENT_IMPORT_DATAFROMEXCEL

i am having a problem regarding how to use this function to import values from an excel sheet.
in call funtion what to specify at place of ct_ent_action = ?
CALL FUNCTION '/CEM/ENT_IMPORT_DATAFROMEXCEL'
CHANGING
    CT_ENT_ACTION       =
EXCEPTIONS
FILE_ERROR          = 1
IMPORT_ERROR        = 2
OTHERS              = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi
The use of Standard Parner functions are as follows:
1. Ordering Address (OA): The PO will be sent this vendor and not the main vendor.
2. Goods Supplier (WL): In case of return deliveries, Goods will be returned to thsi vendor's address
3. Invoicing party (RS): The payment will be made to this vendor.
Hope this clarifies.
Thansk

How to use forecast functions correctly?... Program doesn't work.

Similar Messages

Maybe you are looking for