How to use Generate Synchronization Parameters for PSK modulation and demodulation

Hi I am trying to use Generate Synchronization Parameters.vi to sync the recovered stream after demodulation and my input stream to modualtion block but I don't know how to work with this block to sync input stream with output stream. Also would you please let me know what are the ways to sync input bits and demodulation bit stream.I really appreciated your help
Thanks
Solved!
Go to Solution.

Hi en99,
In order to use "MT Generate Synchronization Parameters.vi" you must wire in the following on your block diagram:
The system parameters created in "MT Generate System Parameters.vi" needs to be wired directly to the sync vi.
The synchronization parameters need to be wired direct to "MT Demodulate.vi"
The synchronization bits can be wired into the sync vi direct from "MT Generate Bits.vi"
What I have done is taken your 11.vi that you uploaded in your previous post and altered it to contain the sync vi. I have saved it as a 2010 version.
I hope this information helps!
Kind Regards,
Laurence C.
Senior Test Development Engineer
Dyson Ltd
Attachments:
11sync2010.vi ‏18 KB

Similar Messages

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use a bluetooth cellphone for audio input and output

Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
Thanks!

Yes it should do what you want.
Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

How to use the (gigabit) ethernet for data exchange and WLAN for Internet?

I have following setup:
- MB Pro SL 10.6
- Desktop PC Windows 7
- Wireless Printer
- Netgear WLAN Router
At the moment all my data and internet communication is done via the WLAN router on 192.168.1.x That works fine and I can exchange data, print and surf the internet. My problem is that big data exchanges > 10GB take ages via my 54Mbit WLAN Connection. Furthermore the WLAN router is far away from the PC so that it is not possible to plug in the Ethernet Cable of the PC and the MB to the router.
Now I've thought that there must be a possibility to use a 1 gigabit (cross) cable (like in the 90s ;)) to connect the MB and the PC directly. I know that I will need different IP ranges and so on, but I have no clue how to do that.
The final solution should be that the setup stays as it is (data exchange, print, internet via WLAN) and that additional it is possible to connect PC and MAC some times for big transfers via a Gigabit ethernet cable. because I only want to connect those two machines I don't think that a switch makes any sense, or?
Does someone know how to do that?
Thanks a lot in advance!
Message was edited by: whitepowder

Well if it were 2 Macs, I would configure each Mac with a fixed IP address (same subnet as my router, but outside of the routers DHCP assignment range).
I would give the same fixed IP address to both my Airport AND my ethernet interfaces. I would do the same to the other Mac using another fixed IP address.
My network service order would have the ethernet higher than the Airport on both systems.
Normally I would use WiFi, so ethernet would be idle and out of the loop.
When I wanted faster transfers, I would connect each Mac to the router via their own ethernet cables, and the Mac would automatically detect that the ethernet became available, and would switch to use the faster ethernet. Since Airport and ethernet have the same fixed IP address, I could even do this in the middle of a file transfer and no one would notice as packets were always going to/from the same IP addresses, just using a different route, which doesn't matter.
NOTE: I've been doing this on Macs since Mac OS X 10.3 days (or was it 10.2; to long ago to remember).
However, you have thrown a Windows system into the mix, and since I do not use Windows, I do not have a clue about what can be done on Windows. However, maybe this will give you some ideas, and asking the right questions in a Windows oriented forum may provide the Windows side of this setup.
Sorry, that is the best I can do. Maybe my reply will encourage someone else to offer their approach.

How to use one Apple ID for mac book and iPhone

I am to buy a mac book pro and also I already have a iPhone 5. Can I use one Apple ID for both them?

Thank you

Spry Slide Show-how to use one size photo for large photo and thumbnail?

Hi all,
I'm am using Adobe's Spry Slide Show. I can only use one size photo 640x480px for both the large photo and the thumbnail.
I changed the size of the small thumnail on the html:
                 <li><a href="Photos/TestPhoto640x480.jpg" width="490" height="367"><img src="Photos/TestPhoto640x480.jpg" width="63" height="47" alt="photos-1.jpg" /></a></li>
The thumbnail looks fine until you hit Live View or Preview in Browser then photo comes in full size and you can only see the upper left hand corner.
I assume that the java is doing this. But I have no training in Java.
How can I change the Java Code so the thumbnail comes in at 63x47px?
Many thanks.

Wish I could use scaled down versions of the thumbnails-but I can't.
Why not?
    img.src = info.src;
    img.style.width = "490px";
    img.style.height = "368px";
You're shooting yourself in the foot with this. It's overriding your HTML and CSS values.
As an FYI, Adobe Abandoned the Spry framework late last year.
http://blogs.adobe.com/dreamweaver/2012/08/update-on-adobe-spry-framework-availability.htm l
You might want to cut your losses right now and switch to something better suited to modern web devices & browsers.
jQuery Fancybox
http://fancybox.net/
20 of the best jQuery Slideshows
http://vandelaydesign.com/blog/web-development/jquery-slideshow/
Nancy O.

Share Global structure for different module and include

Hi,
How can shared the data declaration for different module and include??
Regards,
Kit

Declare your variables in TOP include of the function group.
a®

How do I generate redemption code for creative cloud?

how do I generate redemption code for creative cloud?

On October 27th 2014, you have purchased two CC (one complete &one photography) under the same Adobe ID. That is the reason you are being asked for a code because under one Adobe ID only one CC can be activated(twice).
Please contact Adobe Support or you can inbox me privately the CC order number that you would like to cancel.
You can also check if the host file has Adobe entry or not as if Adobe entries are there then also CC can ask for serial number. You can check the host by the followinh method.
Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
So you need to login with your Adobe ID and password to activate the cloud membership.
Log out & log back in of the CC Desktop App.
In case it is not signing in successfully please try the following:
I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
   Windows:
   In windows 7 navigate to following location:
     /windows/system32/drivers/etc
   1. look out for "Hosts" file
   2. Open it with notepad
   3. Check if you have any entry for Adobe
   4. Remove the entries and try again launching any product from CC
Mac:
   1. Please click on "Go" and navigate to /private/etc
   2. Open "hosts" file and check out for any entries for Adobe.com
   3. Remove the entries and save the file
   4. try again launching any product from CC
Please refer to Creative Cloud applications ask for serial number
Hope it helps you.
Regards
Rajshree
Cannot license Illustrator CC after buying subscription

How to use an authenticated user for a proxy call

Dear all,
I am currently working on a JEE application where the user needs to authenticate (for this I have configured the web.xml).
Now inside this application I need to do a proxy call to a PI webservice.
I would like to use the user credentials of the already logged in user in order to call the proxy.
What I don't want to do is to use a service user for the proxy call.
The code I am trying to call looks something like this:
     private IntegratedConfigurationIn getPort() throws Exception{
          IntegratedConfigurationIn port = null;
          try {
               IntegratedConfigurationInService service = null;
               service = new IntegratedConfigurationInService();
               port = (IntegratedConfigurationIn) service.getIntegratedConfigurationIn_Port();
              BindingProvider bp = (BindingProvider)port;
              bp.getRequestContext().put(BindingProvider.USERNAME_PROPERTY, user);
              bp.getRequestContext().put(BindingProvider.PASSWORD_PROPERTY, password);
              if (url.length() != 0)
                   bp.getRequestContext().put(BindingProvider.ENDPOINT_ADDRESS_PROPERTY, url);
          catch (Exception ex){
               ex.printStackTrace();
          return port;
The examples I found to retrieve the userdata pointed to codes similar to this one:
public HttpServletRequest getHttpRequest() throws Exception {
          // Get runtime context
          Properties props = new Properties();
          props.put("domain", "true");
          Context initialContext = new InitialContext(props);
          ApplicationWebServiceContext wsContext = (ApplicationWebServiceContext) initialContext
                    .lookup(" /wsContext/ApplicationWebServiceContext");
          HttpServletRequest req = wsContext.getHttpServletRequest();
          return req;
com.sap.security.api.IUser sapUser = com.sap.security.api.UMFactory.getAuthenticator().getLoggedInUser(getHttpRequest(), null);
          IUser ep5User = com.sapportals.wcm.util.usermanagement.WPUMFactory.getUserFactory().getEP5User(sapUser);
Now I don't know how to bring it togehter and how to use an authenticated user for the BindingProvider.
I would appreciate any hints or ideas.

Peter,
from the first screenshot, what I understood is that, you are calling an inbound PI web service that is intended to create an integrated configuration object (this is used for whole lot of other reason completely) but not actually calling a development web service.
For this, you would have to generate your client classes from the WSDL provided by the PI developer for that particular service. Once you get those client classes generated, you could used the method provided in the other screenshot to extract the user and password and call the intended web service.
Vijay Konam

How to use multiple selection parameters in the data model

Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
My data template is the following (it's very simple...I am just testing how the parameters work):
<dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
<parameters>
<parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
<parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
</parameters>
<dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
<dataQuery>
<sqlStatement name="Q2">
<![CDATA[
select deptno, dname,loc
from dept
&p_where_clause
]]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="G_DEPT" source="Q2">
<element name="deptno" value="deptno"/>
<element name="dname" value="dname"/>
<element name="loc" value="loc"/>
</group>
</dataStructure>
</dataTemplate>
The 2 parameters are based on these LOV:
1) select distinct dname from dept (p_dep_2_param)
2) select distinct loc from dept (p_loc_1_param)
and both of them have checked the "Multiple selection" and "Can select all" boxes
The package I created, in order to use the lexical refence is:
CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
as
p_dep_2_param varchar2(14);
p_loc_1_param varchar2(20);
p_where_clause varchar2(100);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
then
p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
else
p_where_clause := 'where 1=1';
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
it works perfectly....
Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
So my questions are these:
1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
Thanks in advance for any suggestion
Alex

Alex,
the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
So change your package to (you need to expand your variables)
create or replace package bip_departments_2_parameters
as
p_dep_2_param varchar2(1000);
p_loc_1_param varchar2(1000);
p_where_clause varchar2(1000);
function beforereporttrigger
return boolean;
end bip_departments_2_parameters;
create or replace package body bip_departments_2_parameters
as
function beforereporttrigger
return boolean
is
l_return boolean := true;
begin
p_where_clause := ' ';
if p_dep_2_param is not null then
if instr(p_dep_2_param,',')>0 then
p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
else
p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
end if;
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
end if;
end if;
else
if p_loc_1_param is not null then
if instr(p_loc_1_param,',')>0 then
p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
else
p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
end if;
end if;
end if;
return (l_return);
end beforereporttrigger;
end bip_departments_2_parameters;
I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
Regards
Rainer

How to use SET & GET Parameters in Module Pool

Hi Friends,
Can anyone please tell how to use SET / GET parameters and PARAMETER ID for a text box (Input / Output field ) in module pool? What is the purpose and where do we need to do coding for it?
Note : I will definitely give the marks for good responses.
Thanks in advance,
Pradeep

Hi Pradeep,
You can save values in the SAP memory using a parameter ID. These
are user and terminal-session specific, but available to all internal and
external sessions.
SET Parameter copies the corresponding field contents into the SAP
System memory in the PAI processing block.
GET Parameter copies the corresponding field contents from the SAP
memory at the end of the PBO processing block, after data has been
transferred from the program, if the screen field still has its initial value
You can link an input/output field to an area of the SAP memory in the
ABAP Dictionary.
When you use an input/output field that is defined in the ABAP
Dictionary, its parameter ID is displayed in the Dictionary attribute
Parameter ID in the Screen Painter.
Usage
SET PARAMETER ID: CAR FIELD space,
CON FIELD space,
DAY FIELD space.
Here is the link that explains the usage of GET/SET in detail
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm">http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db9e0435c111d1829f0000e829fbfe/content.htm</a>
Regards,
Sharadha

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

How to log input parameters for Function Modules?

Hi,
I need to create a Logging system to trace input parameters for function modules.
The log functionality could be done by developing a class method or a function module (For example 'write_log'), and calling it within each function module that I want to log. The 'write_log' code should be independent from the interface of the Function Module that I want to log.
For example, I'd like to write a function/class method that can log both these functions modules:
Function DummyA
   Input parameters: A1 type char10, A2 type char10.
Function DummyB
   Input parameters: B1 type char20, B2 type char20, B3 type char20, B4 type Z_MYSTRUCTURE
Now the questions...
- Is there a "standard SAP" function that provide this functionality?
- If not, is there a system variable in which I can access runtime all parameters name, type and value for a particular function module?
- If not, how can I loop at Input parameters in a way that is independent from the function module interface?
Thank you in advance for helping!

check this sample code. here i am capturing only parameters (import) values. you can extend this to capture tables, changin, etc.
FUNCTION y_test_fm.
*"*"Local Interface:
*" IMPORTING
*"     REFERENCE(PARAM1) TYPE CHAR10
*"     REFERENCE(PARAM2) TYPE CHAR10
*"     REFERENCE(PARAM3) TYPE CHAR10
DATA: ep TYPE STANDARD TABLE OF rsexp ,
        ip TYPE STANDARD TABLE OF rsimp ,
        tp TYPE STANDARD TABLE OF rstbl ,
        el TYPE STANDARD TABLE OF rsexc ,
        vals TYPE tihttpnvp ,
        wa_vals TYPE ihttpnvp ,
        wa_ip TYPE rsimp .
FIELD-SYMBOLS: <temp> TYPE ANY .
CALL FUNCTION 'FUNCTION_IMPORT_INTERFACE'
    EXPORTING
      funcname                 = 'Y_TEST_FM'
*   INACTIVE_VERSION         = ' '
*   WITH_ENHANCEMENTS        = 'X'
*   IGNORE_SWITCHES          = ' '
* IMPORTING
*   GLOBAL_FLAG              =
*   REMOTE_CALL              =
*   UPDATE_TASK              =
*   EXCEPTION_CLASSES        =
    TABLES
      exception_list           = el
      export_parameter         = ep
      import_parameter         = ip
*   CHANGING_PARAMETER       =
      tables_parameter         = tp
*   P_DOCU                   =
*   ENHA_EXP_PARAMETER       =
*   ENHA_IMP_PARAMETER       =
*   ENHA_CHA_PARAMETER       =
*   ENHA_TBL_PARAMETER       =
*   ENHA_DOCU                =
   EXCEPTIONS
     error_message            = 1
     function_not_found       = 2
     invalid_name             = 3
     OTHERS                   = 4
IF sy-subrc = 0.
    LOOP AT ip INTO wa_ip .
      MOVE: wa_ip-parameter TO wa_vals-name .
      ASSIGN (wa_vals-name) TO <temp> .
      IF <temp> IS ASSIGNED .
        wa_vals-value = <temp> .
      ENDIF .
      APPEND wa_vals TO vals .
    ENDLOOP .
ENDIF.
ENDFUNCTION.

I cannot get to or use my home pc for a while and am staying with a friend for the foreseeable and am using their pc to write this. How do I access my itunes account on their pc. Thanks Karen

I cannot get to or use my home pc for some time and am staying at a firends and using their pc to write this. I need to access my itunes account and music on their pc. How do I do this. Thanks

An easy route would be to use the iTunes Match service such that all your Songs are available anywhere over the internet via iCloud. Once complete you can create an account on your friends PC, download iTunes and sign-in to the iTunes Store with your Apple Id, start iTunes Match and it will provide access to all your Songs.
Not quite so good, is simply to follow the steps on your friends PC as above, however, instead of iTunes Match simply access the 'purchased' songs area from the iTunes Store home page that will give you access to all your purchases without iTunes Match.
IMPORTANT: Apple only like to see a single Apple Id associated with one device - so if your friend already has an active Apple Id account on the PC, it would be wise to use an alternate machine. Apple has a 90 day lock out associated with switching Apple Ids on a common device.

HT4314 I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

I have a iPad and iPhone with the same Apple ID, but on Game Center I have used the same id for both devices and they are two different profiles and I was wondering how to have one of the accounts on both devices.

Hi Jamesdwills,
Welcome to the Support Communities!
If you are using the same Apple ID on both devices, the Game Center profile should be the same.
Check out this information from the iPad User Guide. Try signing out of the Game Center on both devices and then sign back in with the correct Apple ID:
Using Game Center
http://support.apple.com/kb/ht4314
Game Center settings - iPad User Guide
http://help.apple.com/ipad/7/#/iPad9a13d039
Game Center settings
Go to Settings > Game Center, where you can:
Sign out (tap your Apple ID)
Allow invites
Let nearby players find you
Edit your Game Center profile (tap your nickname)
Get friend recommendations from Contacts or Facebook
Specify which notifications you want for Game Center. Go to Settings > Notifications > Game Center. If Game Center doesn’t appear, turn on Notifications.
Change restrictions for Game Center. Go to Settings > General > Restrictions.
Cheers,
- Judy

How to use Generate Synchronization Parameters for PSK modulation and demodulation

Similar Messages

Maybe you are looking for