How to use HOST call DOS continuous running problem but NOT hold Forms scre

In my Forms, I have a Button a start a MP3 recorder program to record voice, I use HOST command to init the program successfully. However, since the MP3 recorder program in continuous running, the HOST command hold my Forms screen until the MP3 program stop.
I have try to use Open_form to open another form to start this MP3 program. It still hold the whole Forms system.
Is there any solution to start a continuous running DOS program but NOT hold the Forms screen?
Thank You !

You didn't provide your host-command, so i simply guess its something like
HOST('"c:\Program Files\mp3.exe" someoptions');instead of calling the program directly, you could use a commadn batch along with the start-command, for this should launch the program asynchronously:
HOST('cmd /c start "c:\Program Files\mp3.exe" someoptions');hope this helps.

Similar Messages

  • How to use time capsule for wireless back-up but not internet?

    Hello,
    I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
    I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their  network.
    Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
    Thank you for your help.

    Your original question was How to use Time Capsule for wireless back-up but not Internet?
    There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
    If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
    Yes, it appears to work without plugging into my tower.
    Correct, it will work.
    I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
    As I stated, that is the downside to trying to back up without an Internet connection.  You have to establish another network...and backup over that network.
    If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

  • How to use an apple id on an iPad but not have it connect  with my phone and mac

    I've recently sold my ipad to my younger sisters who are using my apple id. once they are in wifi they are able to use facetime and imessage but it connects with my email and phone number. They are also able to view my pictures in "my photo stream". Is there a way to let them us my apple id but completely disable the id from imessage, facetime, and making sure my photo stream does not show up?

    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    When you created your iCloud account, the @me.com email address you created also automatically became an AppleID, but you used an exisiting AppleID in the first place to create the iCloud account before deciding on that @me.com address.  So your iCloud account is actually the AppleID you used to initially create the account, not the @me.com address assigned once the iCloud account was active (look in your account settings on your iPhone or iPad and you can see what the iCloud account primary AppleID is).
    Unless you specifically started using your new @me.com address for things, it is an unused AppleID, but it is NOT your iCloud account primary ID (that is whatever AppleID you used to create the iCloud account initially).
    An AppleID is nothing more than an email address, but it is linked to an AppleID account held with Apple and thus can be used to log in to services including the various Apple stores.

  • Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?

    Can I use the same plan that I have for my iphone 4s with my new ipad? or do I have to buy a new data plan for my new ipad?  I would love to use my new ipad away from home but not sure how to use it?  I am on Telus mobility with my iphone 4s.

    See the answer on the same question you asked a few minutes ago.

  • I am trying to send items to the Trash but it is continually running and will not complete.

    I am trying to send items to the Trash but it is continually running and will not complete.

    Relaunch the Finder, then from the Finder menu bar, select
              Finder ▹ Preferences... ▹ Advanced
    and uncheck the box marked
              Empty Trash securely
    Try again to empty the Trash.

  • How to use wait.for() /wait() commands for MAC? Not working...

    I am trying to run an external application on mac using runtime.exec() and it runs fine but after it runs it suddenly terminates the program. I have a waitFor() command after the runtime.exec() waiting for that program to end. If i comment out the waitFor() then the program terminates by going through the run command. The waitFor() worked fine for PC but doesnt work for MAC... anyone know what i did wrong or alternative way of listening for it? thanks!

    On the PC i have the following:
    Process p = Runtime.getRuntime().exec("C:\\program Files\\QuickTime\\QuickTimePlayer.exe "
    +file.getPath());
    p.waitFor();
    It basically creates a process of QuicktimePlayer and runs the file specified. I then have p.waitFor() used to wait for the user to close the application so i can do listener stuff for it- it worked for PC.
    On Mac
    String b= "open"+ tempFile.getPath();
    Process p= Runtime.getRuntime().exec(b);
    System.out.println("before wait");
    p.waitFor(); .
    System.out.println("app. terminated");
    output:*
    "before wait".
    Program terminates before System.out.println("app. terminated"); but the application (quicktime) starts.
    if I do this:
    String b= "open"+ tempFile.getPath();
    Process p= Runtime.getRuntime().exec(b);
    System.out.println("before wait");
    // p.waitFor(); .
    System.out.println("app. terminated");
    output:*
    before wait
    app.terminated
    program terminates "normally" and I see "app.terminated".
    I used Eclipse so the "red square" turns red when running it and suddenly grays out when the player appears. So to me the program terminated before the p.waitFor(); If i commented out p.waitFor() then the program goes to the System.out statement and everything goes "fine". I tried using thread.wait(), this.wait() p.wait() etc. but i get errors saying they are not owner of the thread.
    hope this helps. thanks

  • HT204053 How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

    How does my spouse get the benefits of using my iCloud for contacts and calanders but not messages, etc?

    iCloud is designed for personal use and not for managing multiple access.  If you gives your password to someone else, this person can benefit everything including access to purchase with your account, email, etc.
    You should rather consider having each one an iCloud account and then, create and share a calendar.  As for contact, you can send them to your spouse to be save in her account but they cannot be shared nor synced.

  • How to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    how to remove 1797 emails. stuck in inbox.  but not showing anymore - and i have the same problem wit the sent.  please help

    This is a user supported frum, so making threats really doesn't help, besides which it's not like any of us can really make a dent in Toshiba's bottom line despite how many people we think we can influence. Unless those people were standing in line to buy a Toshiba product cash in hand, and you pulled them out, it really doesn't add up for them.
    At this point it would probably be better for you to use the 800 number. Have all your e-mails ready to forward, if needed, to whoever you end up talking to. Don;t let them off the hook. An hour on the phone is much better than weeks passing e-mails through a support site. Also contest the charge with your bank or credit card.

  • How can I delete some music from my iCloud but not from my iTunes in my computer? please??

    how can I delete some music from my iCloud but not from my iTunes in my computer? please??

    iCloud doesn't store your music.

  • How do I delete an app from my phone but not the computer? Is there a way to deactivate it so it doesn't add it back when it syncs?

    How do I delete and app from my phone but not from the computer? Is there a way to do this so it doesn't add it back in when it syncs?

    In iTunes under the Apps tab for the iPhone device just uncheck any app you don't want synced to the phone. When you next sync the app will be removed from the phone but remain in the iTunes library.

  • How do I check if a N900 is genuine but not some f...

    How do I check if a N900 is genuine but not some fake ones?
    Do I check the IMEI? or is there other things I have to test if it is genuine?
    Thanks!

    ok.. this shouldn't be difficult.. if it is, then that makes me doubt your phone
    Here's the complicated way that always works..
    press CTRL + SHIFT + X
    on the keyboard.. so that's the top left key with Sym written on it, the bottom left key with the white up arrow on it and the X button..
    the screen should appear white and give you a prompt..
    you can then type
    uname -a
    and it'll display more info.. This a "unix shell" and has been part of Unix computers since the mid 70's

  • Why did the new update for my macbook air hinder my ability to use my camera for google  and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google  or facetime can find a camera on from my mac?

    Why did the new update for my macbook air hinder my ability to use my camera for google  and skype but not photobooth or facetime??? This is messed up it was working yesterday and now neither google  or skype can find a camera on from my mac? what do I do??

    An update for same is coming.
    Theres a patch for same, see here:
    https://discussions.apple.com/thread/5306216?tstart=30

  • Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    Camera card using the Apple connector will load photos but not video? the camera is a panasonic Lumix

    iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Also, the movie files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
     Cheers, Tom

  • Can suddenly not use emoji in textmessages. Can send but not recieve.

    can suddenly not use emoji in textmessages. Can send but not recieve.

    Are any of you going to the Adobe Developer Conference scheduled to be held for plugin providers at San Jose on Nov 7/8?

  • Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV?  Software is up to date, but SEC network not showing up as a channel.  Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which ar

    Is anyone else having trouble viewing the SEC network via Watch ESPN on a 2nd gen Apple TV?  Software is up to date, but SEC network not showing up as a channel.  Using Xfinity - and it appears on iPhone5 but not on iPad2 - both of which are current on IOS. Help!

    the wifi router could also be blocking
    and to really test if the windows firewall is the problem then try turning it off!
    if that scare you too much then disable the internet modem / cable modem or the likes while you test
    always remove more and more factors when troubleshooting sooner or later it will work and you can narrow down which factor did the job and work on that

Maybe you are looking for