How to use Import parameters of a search help

Hi,
Could you please tell me how to use import & export parameters of a search help in the report.

Hi,
Import parameters are imported from the selection screen of the report into the search help and then these are used to query in the search help.
For example
case 1.
parameters : p_carrid like sflight-carrid.
parameters : p_connid like sflight-connid.
the search help that is used in the above condition is
SFLIGHT.
And the selection method is SFLIGHT in this search help.
( to check which search help is used go to se11 display the table and put your cursor on the field and in the menu for goto--> search help.)
so when you do an F4 on connid it looks for a field which is declared like SFLIGHT-CARRID ( and the value entered in it) since the SFLIGHT-CARRRID is an import parameter in the search help, and queries the database where the value is equal to the p_carrid which is declared like SFLIGHT-CARRID and gets only data which is equal to carrid
case 2.
parameters : p_carrid like SCARR-carrid.
parameters : p_connid like sflight-connid.
In this case the system will fetch all the data.
since there is no parameter for SFLIGHT-CARRID on the selection screen it would get all the data from SFLIGHT.

Similar Messages

How to Use "Hot Key" in the Search help

Hi,
Please explain how to use hot key with some example.

TYPE-POOLS SLIS. DATA: BEGIN OF itab OCCURS 0,
        BUKRS LIKE T001-BUKRS,
        BUTXT LIKE T001-BUTXT,
      END   OF itab.
PARAMETERS: P_BUKRS TYPE BUKRS.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_BUKRS.
PERFORM F4_FOR_BUKRS.
FORM F4_FOR_BUKRS.   DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
        ES_SELFIELD TYPE SLIS_SELFIELD. * Get data
SELECT BUKRS
         BUTXT
         FROM T001
         INTO TABLE itab
         up to 10 rows .
Get field
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = SY-REPID
            I_INTERNAL_TABNAME = 'ITAB'
       CHANGING
            CT_FIELDCAT        = IT_FIELDCAT[].   LOOP AT IT_FIELDCAT.
    IT_FIELDCAT-KEY = SPACE.
    IF IT_FIELDCAT-FIELDNAME = 'BUTXT'.
      IT_FIELDCAT-EMPHASIZE = 'C710'.
      IT_FIELDCAT-HOTSPOT = X.
    ENDIF.
    IF IT_FIELDCAT-FIELDNAME = 'BUKRS'.
      IT_FIELDCAT-EMPHASIZE = 'C610'.
    ENDIF.     MODIFY IT_FIELDCAT.
ENDLOOP.   CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
    EXPORTING
I_TITLE                       = 'THIS IS FOR F4 IN COLOR'
      I_TABNAME                     = 'ITAB'
      IT_FIELDCAT                   = IT_FIELDCAT[]
    IMPORTING
      ES_SELFIELD                   = ES_SELFIELD
    TABLES
      T_OUTTAB                      = ITAB . ENDFORM.                    " F4_FOR_BUKRS

How to add one column in existing search help.

Hi Folks,
My quesion is
How to add one column in existing search help and also Now search help on that field is not an explicit search help. It should be implement using check table.
Shivam

Hi,
If you want to add a field in Elementary search help, get the search help name for the and go to change mode and add the field in it.
If you want to add a field in collective search help, go to included search helps tab and a new search help name and add the fields to it.
I think this should help you to certain extent.
Regards,
Kranthi
Edited by: Kranthi on Jan 14, 2010 11:15 AM

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

How to use import script with FDM using adapter ERPI?

Hi,
I use FDM and ERPI 11.1.2 to load data from EBS R12 to Planning 11.1.2
Data loaded from eBS are YTD data.
I have seen that I could use an import script to calculate manually the amount with the periodic_net_cr and periodic_net_dr fields.
But how to use this import script? Because in my import format in FDM, I don't use a file but directly the adapter, so no "Expression" field.
Thanks in advance for your help
Fanny

Hello Fanny,
No you will not need to put anything in the BatchAction. If you review the FDM API Documentation posted it will outline all the scripts that will execute for a particular event ... and the order in which they execute. The BatchAciton only affects the execution of the batch ... it does not control processing of data. Processing of data is controlled by many others.
There is a script that can be written and placed (as Tony mentioned) in the ImportAction that will be able to recaculate the values from ERPi to be YTD values. You can possibly open an SR and a support Engineer can help you .... or you can search the current KM base and use that information there from the v11.1.1.3.00 version to build your own for v11.1.2.x
Thank you,

How to use HTML parameters in Java applet

Hello
In perl I have created a form with things like a selectiuon box called currency and text fields called product for example. Then when I click submit the perl program can pick up the currency and product parameters.
I have read about applet param eg <param name="param1" value="Apple"> is this the same thing? Or is it different?
Can I use HTML parameters or do I need to use applet param? I am confused.
If applet param is what I need, then how do I change the param values say by editing text in a text field?

You will need to use Java Native Interface JNI. Ther are many posts on the subject, please search, and this is the documentation:
http://java.sun.com/j2se/1.5.0/docs/guide/jni/spec/jniTOC.html

How to use event parameters?

Hi
I've made simple eem applet for shutdown the port which trigered storm control event.
It is look like that:
event manager applet shut-storm
event storm-control
action 1.0 cli local python bootflash:shut-storm.py
and the script is
from cisco import CLI
from cisco import cli
import sys
import datetime
import time
import re
whitelist = [
"Ethernet1/1",
"Ethernet1/2"]
shlog = CLI('sh logg last 100 | i ETHPORT-5-STORM_CONTROL_ABOVE_THRESHOLD | last 3',False).get_output()
pat = re.compile(r'(\d{4} \w{3} \d{2} \d\d:\d\d:\d\d) \S+ \%ETHPORT-5-STORM_CONTROL_ABOVE_THRESHOLD: Traffic in port (Eth\S+|[Pp]o\S+)')
now = datetime.datetime.now()
delta = datetime.timedelta(seconds=180)
for l in shlog:
mobj = pat.match(l)
if mobj:
    port       = mobj.group(2)
    logTimeStr = mobj.group(1)
    logTimeObj = time.strptime(logTimeStr, "%Y %b %d %H:%M:%S")
    logTime    = datetime.datetime(*logTimeObj[:6])
    if now-logTime < delta:
      if port not in whitelist:
        cli("conf t")
        cli("interface %s" % port)
        cli("shutdown")
But the python script is a bit complecs because it shoud find triggered interfece in log.
Is it possible to use event parameters? And how?
I know that they are:
sw1# sh event manager history events det
Event ID Time of Event        Event Type                   Slot       Policies
32       09/30/2013 15:40:51 storm_control                active(1) shut-storm
    interface = "Ethernet1/16", cause = "storm-control"

Thank you Joseph.
It works.
Now the applet looks like:
event manager applet shut-storm2
event storm-control
action 1.0 cli local python bootflash:shut-storm2.py $interface
And the script:
from cisco import cli
from syslog import syslog
import sys
whitelist = [
"Ethernet1/1",
"Ethernet1/2"]
port = sys.argv[1]
if port not in whitelist:
cli("conf t")
cli("interface %s" % port)
cli("shutdown")
syslog(2, "Interface %s was shutdown due to storm conditions" % port)

How to use synonyms on multiple word search ?

We use context with multiword search like this one :
select * from my_table where contains(my_text,'the small building near the river')>0
Now we have specific synonyms in a thesaurus. How do we write the contains clause ?
contains(my_text,'syn(the,thes) and syn(small,thes) and syn(building,thes) and syn(near,thes) and syn (river,thes)')>0 does not fin the synonym for "small building"="house" for instance
contains(my_text,'syn(the small building near the river,thes)')>0 does only for synonyms on the full sentence.
More generally is there an Oracle Document which describes how to use SYN, FUZZY and combine them, since
the reference documentation gives only limited information on this ?
Have a nice day

The thesaurus functionality is not currently built for stuff like this.
if you want to combine fuzzy and thesaurus, I am assuming you want to do fuzzy first, to correct any misspelling,
then thesaurus on the "corrected" spellings? You'd have to do something like:
1. take the query and run ctx_query.explain to break it down and do the fuzzy expansion
2. work through the fuzzy expansion and build a new query string by sticking SYN() around each
expanded word
As for thesaurus expansion and phrase, these are not compatible. Thesaurus expansions use "," and "|", and so
you cannot have a phrase of thesaurus expansions.
I see what you're getting at, but you would need sub phrase detection, phrase equivalence, etc., which is
currently beyond the thesaurus function capability.
You can use themes (ABOUT) on phrases, and it will do something like what you are describing. You might want
to check that out.

How to use import parameter to be instead of SQL where sub-sentence ?

I wrote a RFC to read data from SAP table. To fetch data flexibility, I want to use import parameter xx instead of where sub-sentence in SQL sentence.
   For example, "SELECT * FROM T WHERE XXX", and "XXX" is a importing parameter.
   How can I use it.
   Thanks a lot.
   Frank.

FUNCTION ZRFC_04.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(TARGETTABLE) LIKE MAKT-MAKTX
*"     VALUE(TWHERE) LIKE MAKT-MAKTX
*" EXPORTING
*"     VALUE(ZRETURN) LIKE MAKT-MAKTX
*" TABLES
*"      TMP_TEST1 STRUCTURE ZTEST1
DATA:
TRANSACTION_ID LIKE ARFCTID,
V_VAILD(1) TYPE C,
scond(80) TYPE c.
V_VAILD = 'X'.
GET PARAMETER twhere fields scond.
The error " 'LATE FIELDS' expected, not 'TWHERE FIELDS' " generated.

How to use Default parameters

Hello,
How do I use default parameters from ODP.NET. I have a proc in Oracle that shows Default? = Y when I do Describe in PL/SQL Developer. Therefore, I don't want to pass this parameter at all via ODP.NET/C# call. If I omit this parameter, I get the dreaded "Invalid number or types of parameters" error.
Thanks for your help,
Evgueni

Hi,
You'll just want to set OracleCommand::BindByName=true. Here's an example, hope it helps.
Greg
create or replace function showparams(p1 varchar2, p2 varchar2 default 'foo',
           p3 varchar2, p4 varchar2 default 'bar') return varchar2
is
retval varchar2(4000);
begin
retval := 'p1 = '|| p1;
retval := retval || ',p2 = ' || p2;
retval := retval || ',p3 = ' || p3;
retval := retval || ',p4 = ' || p4;
return retval;
end;
using System;
using System.Data;
using Oracle.DataAccess.Client;
class testdefault
    static void Main(string[] args)
        using (OracleConnection con = new OracleConnection("data source=orcl;user id=scott;password=tiger"))
            con.Open();
            using (OracleCommand cmd = new OracleCommand("showparams", con))
                cmd.CommandType = CommandType.StoredProcedure;
                cmd.BindByName = true;
                cmd.Parameters.Add( new OracleParameter("retval", OracleDbType.Varchar2,4000));
                cmd.Parameters["retval"].Direction = ParameterDirection.ReturnValue;
                cmd.Parameters.Add("p1", "firstval");
                cmd.Parameters.Add("p3", "secondval");
                cmd.ExecuteNonQuery();
                Console.WriteLine(cmd.Parameters["retval"].Value.ToString());
}OUTPUT
=========
p1 = firstval,p2 = foo,p3 = secondval,p4 = bar
Press any key to continue . . .

How to use init parameters?

Is it posible to use init parameters with FacesServlet?
With any other servlet I'd do this:
<servlet>
- <init-param>
<param-name>base</param-name>
<param-value>/shop</param-value>
</init-param>
</servlet>but it doesn't seem correct to the same with the FacesServlet ie:
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
- <init-param>
<param-name>imageURL</param-name>
<param-value>/images/</param-value>
</init-param>What is the right way to use init params with JSF?

You don't have control over the FacesServlet.
Rather use the context-param.
<context-param>
<param-name>paramName</param-name>
<param-value>paramValue</param-value>
</context-param>
String paramName = facesContext.getExternalContext().getInitParameter("paramName");

How to triger a event when select search help

code like this
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: pa_werks LIKE t001w-werks.
SELECTION-SCREEN COMMENT 20(10) g_werks.
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN ON pa_werks.
g_werks = pa_werks.
I want when select search help ,g_werk changed,but now only press enter g_werks will be change
how can I do ? when select a value from search help g_werks change

Hi,
Use something like this:-
PARAMETERS : p_werks TYPE t001w-werks.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_werks.
PERFORM get_f4_help.
*& Form GET_F4_HELP
* -->P_WERKS text
"populate an internal table with all possible values to be displyed
"Use FM F4IF_INT_TABLE_VALUE_REQUEST
Hope this helps you.
Regards,
Tarun

How to display check box in the search help restriction pop-up window

Hi Experts,
I have created one searc help with dialog value restrictions. Search help contains 4 fields.
Out of which one field has length one character.
As oon as user press on F4 on particular field, it will display pop-up window with restrictions and displayed 4 fields.
I would like to show that field ( one character length field) as check box in search help restrictions pop-up window.
Pls help me ,... How can we acheive this..
Thanks
Raghu

Ur Exact Requirement,
Types : begin of itab,
     fields type c,
     Check type c,(For Check Box)
     end of itab.
data it_tab type standard table of itab.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_input-low.(If it is in select-options)
CLEAR v_input.
GET CURSOR FIELD s_input VALUE v_input.
CALL FUNCTION 'AIPC_CONVERT_TO_UPPERCASE'
    EXPORTING
      i_input = v_input
      i_langu = sy-langu
    IMPORTING
      e_output = v_input.
CLEAR s_input-low.
IF v_input NE '' .
    IF v_input NE '?'..
      v_input1-sign = 'I'.
      v_input1-option = 'CP'.
      v_input1-low = v_input.
      APPEND v_input1.
    ENDIF.
ENDIF.
SELECT DISTINCT   Field
                  FROM Table
                  INTO TABLE it_tab
                  WHERE field IN v_input.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
          EXPORTING
            i_title                 = 'Select Colors'
           i_selection             = 'X'
            i_zebra                 = 'X'
            i_screen_start_column   = 5
            i_screen_start_line     = 5
            i_screen_end_column     = 30
            i_screen_end_line       = 12
            i_checkbox_fieldname    = 'CHECK'
            i_tabname               = 'IT_TAB'
            i_scroll_to_sel_line    = 'X'
            it_fieldcat             = it_fieldcat1
            i_callback_program      = sy-repid
            i_callback_user_command = 'USER_COMMAND1'
          IMPORTING
            es_selfield             = selfield
          TABLES
            t_outtab                = it_tab
          EXCEPTIONS
            program_error           = 1.
Cheers,
Naveen

How to pass the default value to search help selection screen

Hi
I need to push a certain value as a default value based on a condition to the slection screen of search help in web UI.
Could you please let me know how can we do this?
When we try to open the 'F4' help in web ui then it should populate a certain value as a default value to the selection screen of this 'F4' help. We will get this default value based on condition.
Regards
Anil

Hi Arun
I'm using SE11 search help.I'm giving you my code for your reference here.
DATA:
    ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
    lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    lr_qs           TYPE REF TO cl_crm_bol_dquery_service,
    lr_current     TYPE REF TO if_bol_bo_property_access,
    lv_category    TYPE STRING.
ls_map-context_attr = 'struct.zzattr_i_1'.
ls_map-f4_attr      = 'ATTRIBUTE'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CLEAR ls_map.
ls_map-context_attr = 'struct.zzattr_i_1'.
ls_map-f4_attr      = 'SERVICE_LINE'.
APPEND ls_map TO: lt_inmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZATTR1'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_trigger_submit           = abap_true
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
Here 'ZATTR1' is my search help name in SE11 and the field which is having 'F4' help is 'ATTRIBUTE'.
Now when I press 'F4' on 'ATTRIBUTE' then it will give a popup and this popup is having 3 fields..
1.'ATTRIBUTE'
2.'SERVICE_LINE'
3.Description of 'SERVICE_LINE' and hence by pressing 'F4' i should get a value in the field 'SERVICE_LINE' based on
   a condition.
However, if there is a value for ATTRIBUTE on the screen and when we press 'F4' on this then in the popup the value of
ATTRIBUTE which is there on the screen is appearing in the 'ATTRIBUTE' field and the same value is being copied to
'SERVICE_LINE' field in the popup.
Please guide me how do we populate the value to 'SERVICE_LINE' field inside the search help popup of 'ATTRIBUTE'.
Best Regards
Anil

How to validate a filed in a search help which is created in se11

hi
i got a requirement that validate a search help. i created a ztable with 3 fileds for that one i have to create a search help so help me to how to validate fields in a search help.
regards
krishna

Hello Krishna,
What do you mean by validating a field? Usually you use a search help to display possible values for a certain input field based on values in another table. You can restrict the values that are displayed by certain conditions if you need to.
If you want to allow only values based on complex conditions or authorizations of the user, you can always create a search help exit and in there you have complete control over what the user is allowed to see in the search help and what he is allowed to select.
Function Module F4IF_SHLP_EXIT_EXAMPLE gives you an idea what you can do in a search help exit.
Regards,
Michael

How to use Import parameters of a search help

Similar Messages

Maybe you are looking for