How to use itunes music into adobe premiere elemesnts video

I want to use my itunes music into a adobe video.
How can I transform the itunes music so I can use into the abode video?

Try to use instructions for consolidating library from here, see if that helps. At some point I have noticed, especially with huge library it gets hard for itunes to keep information about different locations, unless you have external drive plugged permanently.
http://support.apple.com/kb/PH1459
http://support.apple.com/kb/ht1449

Similar Messages

  • How to import .AVI files into Adobe Premiere Elements 12?

    I can play videos in Adobe Organizer but cannot import into Premiere Elements due to a missing codec or unsupported file type.

    Do not download a codec pack until you Google to find out if it contains malware... and I am NOT saying the link in reply #1 contains malware, only that SOME codec packs can cause huge problems
    Read below and report back with your file details
    Codec & Format information, with 2 links inside to read -read both links in reply #1 http://forums.adobe.com/thread/1270588
    Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
    http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
    For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
    For Mac http://mediainspector.massanti.com/

  • Does anyone know how to put Itunes music into a flash drive?

    I'm trying to put my music from my Mac Book Pro into a flash drive so I can play it in the car.

    cristian19862 wrote:
    how can I do that?
    Highlight the tracks you want in your iTunes library.  Insert the flash drive into your computer, open it so it looks like a folder, and simply drag the highlighted tracks to it.
    This puts a copy of each file onto your flash drive, and does not change anything in your library.
    If you normally run iTunes in full screen mode, make it smaller so you can do the drag,

  • How to get audio into Adobe Premiere Elements 12?

    How to get audio into Adobe Premiere Elements 12?
    I have filmed an air show with a very good camera JVC pro
    And when I pick up the clips in Adobe Premiere Elements 12, it works too, but only without sound.
    I think I tried everything for 4 days now.
    Sound in my computer works perfectly
    I go to where the video files are located and try to run them in VLC or in Nero Kwik so it works fine with both audio and video.
    I have checked the sound card.
    Yes, I have tried everything so now I'm so tired of this lousy so I'm ready to throw this program at the dump.
    It's not normal if you will keep on producing audio for over 4 days at Adobe
    The old Elements 9 worked fine. Offer some of would consider developing it again. I do not know how I should do.
    My name is Thore Hult
    live in Karlshamn in Sweden

    Thore Hult
    On what computer operating system is your Premiere Elements 12 working on? Have you updated it from 12 to 12.1 Update using an opened project's Help Menu/Update. If not, please do so.
    For your immediate problem.
    What is the model/settings for the JVC camera that recorded you video. I want to get at the properties of your source video including the file extension.
    Since you are getting video, but no audio, please download and install the free codec utility named GSpot to see what is shows
    for your Audio Name and Status.
    http://www.headbands.com/gspot/
    The other properties of the file there would also be of interest.
    When you import your source file into the project, do you see any "conforming" activity going in a progress bar at the bottom right corner of the workspace?
    If so, do you wait for it to complete before you move forward in the project?
    Can you get sound in any of your Premiere Elements projects with this current JVC file or other?
    Can we assume that your troubleshooting has included checking
    a. Volume control within the project
    b. Edit Menu/Preferences/Audio Hardware ASIO
    Let us start here and then we can decide what next if necessary.
    Thanks.
    ATR

  • How to use MP3 music with Premiere Pro CS3 ?

    When I try to add a MP3 Audio music file into Premiere Pro CS3 to use with my video I get a file format not able. Can someone please tell me how to use MP3 music files with my video im trying to make, is it possible?

    Perhaps:
    FAQ:Why can't I use MP3 audio files?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • HT1535 How do I put music into iTunes that is on my iPod touch? I have music on my iPod touch that is not in my iTunes library.  I do NOT want to loose these songs when I sync to iTunes.

    Recently I had to replace my computer with a new one. The old hard drive died and there was no way of retrieving any of my data from the dead computer. When I downloaded iTunes onto my new computer there were several songs missing in my iTunes library. I was able to retrieve most through purchased music, however there was some music that I had downloaded from other sources and that music is still on my iPod touch. How do I put music into my iTunes library that is on my iPod touch but not in the iTunes library? I do not want to loose the music on my iPod when I sync to iTunes library.

    Syncing media to iOS devices
    iPhone User's Guide
    As for the content purchased from BN.com that shows up in the nook app... check with Barnes and Noble to see if it's possible for that content to show up on your computer.

  • How can I import music into iTunes from other media .I have music which was downloaded from my Sony Ericcson W715 into "Media Go" and I want to transfer it into iTunes.Is this possible ?

    How can I import music into iTunes from another media.
    I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
    Is this possible ?
    Chris
    <Email Edited by Host>

    chrisfromgoodworth clatford wrote:
    How can I import music into iTunes from another media.
    I have a library downloaded from a Sony Ericsson W715 into "Media Go" and I want to transfer to iTunes and then into my iPhone 4.
    Is this possible ?
    Chris
    Possibly. Media Go supports a variety of music formats, some of which can be imported in to iTunes and then synced on to an iPhone, however some of its formats cannot be imported in to iTunes.
    See http://mediago.sony.com/enu/supported-file-formats/ for a list of formats supported by Media Go. iTunes for Windows supports MP3, AAC, WAV, and can import and convert WMA files as well. However iTunes does not support ATRAC, or FLAC.
    Furthermore, if some of your music has been bought from an Internet music store it might be procted by DRM. If so it cannot be imported in to iTunes.
    To do the importing you would either drag the music files in to iTunes, or tell iTunes to open them. See http://support.apple.com/kb/ht1347

  • Need help how to use itunes card to download music

    Need help how to use itunes card to download music

    If you want to add the iTunes card to your account, then in the iTunes app on the iPad you should be able to scroll to the bottom of the Music tab and there should be a Redeem button - there is more info here : http://support.apple.com/kb/HT1574

  • How do you import "MVI_  file #  .THM" from "Canon Powershot SX1 IS" into Adobe Premiere Elements

    When I tried to import a   MVI_  "file #"  .THM  file from a "Canon Powershot SX1 IS" camera into Adobe Premiere Elements, I received the following message: "This type of file is not supported, or the required codec is not installed."
    How do  I resolve this issue?
    Thanks for any assistance that you can provide.
    John

    Steve,
    Thanks for your help.  You are correct that there is another file with the same name without the ".THM" extension.
    What I said was incorrect.  I was trying to import the file without the ".THM" extension and getting the afore mentioned message.
    However, I just discovered that this MVI_ file is a "Quick Time Movie" format not an "avi" format.
    Do I need to convert this format or does it have something to do with a codec?
    Thanks,
    John

  • I am disgusted: how is it possible that i cannot import a simple f...ing vob into adobe premiere???

    i am disgusted: how is it possible that i cannot import a simple f...ing vob into adobe premiere???

    I think you would need to transcode those clips to a format PPro can deal with more easily before you begin.
    https://forums.adobe.com/thread/464549

  • How to import original clips edited in After Effects into Adobe Premiere, without the After Effects

    What is the quickest and easiest way to bring clips that were edited within after effects into adobe premiere? I just want the original clip as it is cut, without any of the after effects manipulation. I am trying to gather the cuts of a green screen project together that was compiled and edited within Adobe After Effects, so they can be rekeyed. I want to detach all effects work, and just have a straight green screen cut of the original files. Each cut though, is its own compilation. Simply importing to a new sequence doesn't seem to be the answer because I first have to uncheck many effects to find the original clip buried beneath layers of mattes and various effects. I have probably 400 different cuts, and currently my workflow is super slow just searching for the original clip in after effects, looking for the time code, then matching the original clip and timecode into Premiere. Is there a faster an easier workflow?
    Thank you

    I just want the original clip as it is cut, without any of the after effects manipulation.
    Then you need the original clip.
    my workflow is super slow just searching for the original clip in after effects
    It's what you may need to do, though. Unless you know exactly where the clips are on the hard drive.

  • I am having a hard time . i am trying to import  .MOV into adobe premiere elements 10. ???

    i am trying to import     .MOV into adobe premiere essentials 10.   please help

    Patrick Bourret
    I think that we may now be in a multiple thread situation.
    I just responded to this thread in this forum minutes ago.
    http://forums.adobe.com/thread/1365716?tstart=0
    Please use the other thread to continue the discussions in the progress.
    Mutliple threads on the same matter can be confusing for those asking the question and those trying to reply.
    Thanks.
    ATR
    Add On...Please be sure to include just what problems you are having (in detail) so that we can distinguish between a how to question rather than why is this not working question.

  • Why won't some .gif files import into Adobe Premiere 11?

    Hello! New to Premiere here.
    I'm working on a project which involves processing roughly 200 animated .gifs taken from the internet. Many of them will import nicely into Adobe Premiere 11.
    The problem is that not all of them will do this. Many of them will give the following message and freeze the entire import process.
    This seems like a strange error message to get because
    a) It seems to say here that the .gif format IS supported
    b) There don't seem to be any codecs for this 11.
    The gif that produced that error message is below:
    What especially frustrates me is that a gif with similar resolution and size will import, but the one above will not. Below is an example of a gif that will import into Adobe Premiere 11:
    Is there an explanation for why this is the case? I have looked up this issue extensively on the internet, and every other person with this issue seems either to be stumped or find a solution for a much older version such as Premiere 8.
    Any help would be greatly appreciated.
    Thank you!

    I'm happy to announce to you all that my "mp4 importing" issues has been sorted out. Now I import mp4 shot with the same Windows Phone 8 Device into Adobe Premiere Pro CS4. Only that for the moment, it doesn't play as fast as with ordinary player.
    But how did I get it to work, you may wonder;
    I simply installed Itunes on the system, I also installed an app called media monkey. I can't say which of the apps did the magic but the next time I tried to import mp4 files into Premiere Pro after these installations, it imported seamlessly.
    Obviously there's a link between the required codecs and the itunes itself.
    You may want to try it and hope it works for you.
    Kindly inform us if it works.
    Thank you all.
    Cheers.

  • How do you sync music into your library from another file

    how do you sync music into your library from another file?  After moving all my music into a new location, is there a quicker way to upload the music into the library rather than adding file by file?

    Hi MonicaJani,
    Thanks for using Apple Support Communities.  You can also add folders of media as described here:
    Adding music and other content to iTunes
    http://support.apple.com/kb/ht1473
    Adding content on your computer to iTunes
    iTunes helps you add digital audio and video files on your computer directly to your iTunes library. You can add audio files that are in AAC, MP3, WAV, AIFF, Apple Lossless, or Audible.com (.aa) format. If you have unprotected WMA content, iTunes for Windows can convert these files to one of these formats. You can also add video content in QuickTime or MPEG-4 format to iTunes. To learn how to add these files to iTunes follow the steps below.
    Open iTunes
    From the File menu, choose one of the following choices:
    MacAdd to Library
    Windows
    Add File to Library
    Add Folder to Library
    Navigate to and select the file or folder that you want to add
    If iTunes is set to "Copy files to the iTunes Music folder when adding to library," iTunes will copy all content that is added to the iTunes library to the iTunes Music folder. To adjust this setting or change the location of this folder, go to the Advanced tab in iTunes Preferences.
    Cheers,
    - Ari

  • How to use iTunes with an external hard drive?

    Hi-
    I'm pretty new to iTunes, so forgive me if this is a stupid question. I have about 15GB worth of music saved onto my laptop now and taking up a ton of space. So I got an 80GB external hard drive to move everything onto. What I don't understand, though, is what happens after I save my music onto the external hard drive and remove from my laptop hard drive. How do I play music in iTunes from the files stored on the external hard drive?
    Thanks in advance!!
    HP Compaq NC6000 notebook   Windows 2000  

    Welcome to discussions! Even though this is the "using iTunes music store" forum, for questions & issues using the store, I can go ahead & offer a little advice. This link from MacMuse will explain about moving iTunes to a new drive. The most important point being is you must tell iTunes the location of the iTunes music folder on the EHD. Please post back if you have any questions.
    http://discussions.apple.com/thread.jspa?threadID=121879

Maybe you are looking for

  • Windows 8.1 is throws error when displaying SAP Crystal Reports 10.5

    Hi there, On windows 8.1 – 64  bit SAP Crystal Reports fails to work (even empty report): "Could not load file or assembly 'CrystalDecisions.CrystalReports.Engine, Version 10.5.3700.0, culture=neutral, PublicKeyToken=blahblah' or one of its dependenc

  • NOt able to start the listener..

    After Indtalling oracle 11g .. i am not able to start the listener dbstart $ORACLE_HOME lsnrctl start ORACLE_SID=orcl export ORACLE_SID lsnrctl start [oracle@test1 bin]$ lsnrctl start LSNRCTL for Linux: Version 11.1.0.6.0 - Production on 27-DEC-2012

  • Multiple webdynpro applications for single webdynnpro component

    I am working on a object which have multiple webdynpro applications for single webdynnpro component.How to assign a different functionality to each application bcoz when we right click on webdynnpro component and select create webdynpro applications

  • How to get End System error code?

    I am trying to access IBM MQ queue from my proxy service which is invoking a business service using OSB Service Callout Action. Suppose the queue that I am trying to access is not available, OSB is always returning "OSB Service Callout action receive

  • Mail is frozen.  Ipad working fine.

    the screen shows inbox and one message but no responce when I touch screen.