How to use itunes volume control in mainstage

Hi everyone!
I want use itunes volume control in mainstage (by slider or something). Can someone help me?

You would need to write an Applescript (there are some already under Parameter Mapping>Actions>Applescript). Check online at "dougscripts.com/itunes/itinfo/eqandvolume.php" for some scripts for changing iTunes volume. You will need to put the Applescript in the same folder the other Mainstage Applescripts are in (drive>Library>Application Support>Logic>Mainstage Scripts). I haven't tried this myself, but why not give it a go?

Similar Messages

I don't understand how to use the volume control on the new iphone headphones

I just bought the new style earphones for my iphone and it has a new volume control -- how does it work? On the old one you just pushed up or down for volume control but now it just increases volume for the time you hold it down? Does anyone know how to use this properly?

I have had good success with the System Font Panel. Now all of a sudden, I only get part of it. Any suggestions on how to restore the entire panel? There are no change size options in the corners like in some dialog boxes. I was going to paste what I have here, but for some reason, paste is not available.

[Forum FAQ] How to use parameter to control the Expand/Collapse drill-down options in SSRS report?

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
  Child Group: CalendarYear
   Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes           Value: Yes
Label: No            Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes           Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No            Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012

I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

1. HP Pavilion dm4 XO132AV
2. Windows 7 64-bit
3. No error message
4. No changes were made prior to when the issue occured
5. Question: I am no longer able to use the volume control buttons ( /-/or mute) on my key board in Windows 7

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp50501-51000/sp50856.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, restart the notebook and let Windows fully load. Open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments

How to use itunes gift card to buy apps on ipad 2? Do I need a credit card for it?

how to use itunes gift card to buy apps on ipad 2? Do I need a credit card for it?

I'm sorry, but there is nothing that I can do to help you with this situation. I don't know why, but many people have problems when they try to buy gems in the Clash of Clans game. Personally, I wouldn't touch the game with a ten foot pole, but that's just my opinion.
You will have to contact iTunes Store Support and ask for their help. You can email them from here.
https://getsupport.apple.com/Issues.action

How to use tcom to control vi

how we use tcom to control vi program? we have got this tcl script from googling but it is not running , it says to run the vi as activex server ,how can we do it? it is opening the vi but gives the error "high frequency not found in vi connector pane.what are the different methods that we can use with vi ? in the example some methods such as getvireference etc have been used
# Interfacing to LabView via TCOM
package require tcom
# Start the "Frequency Response" VI as an ActiveX server. (If the VI
#was
# compiled then you would refer to it by its registered server name.
#For
# example, if you compiled 'A.vi' and created 'A.exe', then you would
#load
# it with 'set lv [::tcom::ref createobject "A.Application"]'.)
set lv [::tcom::ref createobject "LabView.Application"]
# Create a reference to the VI. (You may want to use
# '[$lv ApplicationDirectory]' to get the correct path for this PC.
# For a compiled VI, use just the VI's name, for example:
# 'set viPath "A.vi"'.)
set viPath "C:\\Program Files\\National Instruments\\LabVIEW 8.2\\examples\\apps\\freqresp.llb\\Frequency Response.vi"
set vi [$lv GetVIReference $viPath]
$vi FPWinOpen True
# Create the parameter arrays. The first array is a list of terminal
#names;
# the second array is a list of their values. We must pass in a value
#for
# every terminal on the VI's connector (unless we are very sure that
#the VI
# has a valid initial value for that terminal). We must also pass in
#a
# value for the output terminals; LabView will ignore it.
set names [list Amplitude "Number of Steps" "Low Frequency" "High
Frequency" "Response Graph"]
# Create the values array
set values [list 5 105 15 1005 0]
# Call the VI and get the results
$vi Call names values
# The Response Graph is returned in 'values'
puts $values
#5 105 15 1005 {{400.0 406.238291234 412.573873162...
# If the VI is running we cannot use the 'Call' method, but we can
# set and query individual Controls/Indicators. (The "Frequency
# Response" VI does not continue running - you call it, it runs, then
# it stops until you call it again. However, many VIs run
#continuously
# once you start them, and many are set to start running as soon as
#you
# load them. Obviously, compiled VIs typically start running as soon
# as you load them.)
$vi SetControlValue "Low Frequency" 5
$vi SetControlValue "Amplitude" 10
$vi GetControlValue "Amplitude"
# 10
# The graph hasn't changed (because the VI isn't running), but we can
# still read it. Notice that the graph is an Indicator (not a
#Control),
# but we still use the 'GetControlValue' method to read it.
set new_graph [$vi GetControlValue "Response Graph"]
# You may need to manipulate the VI's menus. Unfortunately LabView
#does
# not expose any method for doing this, so you must use the Windows
# Scripting Shell. The <ESC> key does not seem to work this way, so
# the menus should have shortcuts that use ALT or Ctrl key
#combinations.
# Start the Windows Scripting Shell and send an <ALT> key to the GUI
set WShell [::tcom::ref createobject WScript.Shell]
$WShell SendKeys %%
$WShell SendKeys {DOWN}
# Send Alt-X
$WShell SendKeys %X
# When we are done, we may want to shut down the VI.
$lv Quit

Hi,
I'm not too familiar with tcom interfacing with LabVIEW, but you may want to check out other DFs, such as this one here. Would it be possible to printscreen the LabVIEW error you are talking about- "high freq not found...". Furthermore, you may want to confirm the functionality of the script with the person who made it.
I hope this helps,
Regards,
Nadim
Applications Engineering
National Instruments

HT201303 how to use itune for my iphone?

how to use itune ?

Hi Rashid,
To use itunes for Ur iPhone click http://www.apple.com/itunes/how-to/#video-sync
Setting up syncing
Tutorial:
Before setting up syncing you should download and install the latest version of iTunes. Wi-Fi syncing requires iTunes 10.5 or later and iOS 5 or later. You can change your sync options at any time. Each time you sync, content is synced between your iOS device and computer to reflect new, updated, or deleted content.
USB syncing
Open iTunes.
Connect the iOS device to your computer using the included USB cable and select it in iTunes under Devices on the left-hand side:
Some tabs may not appear if you do not have corresponding content in your library. For example, if you do not have any podcasts in your library, the corresponding Podcast tab will not appear.
Click Apply, in the lower-right corner of the screen, to sync.
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
What you can sync
Applications
Audio content—music, podcasts, audiobooks, and iTunes U content
Bookmarks
Books
Contacts
Calendars
Movies and TV shows
Photos
Notes
Documents (File Sharing apps only)
Ringtones
Additional Information
The first time you sync the Info tab with your iOS device, you are asked if you want to merge data, replace data on the service, or replace the data on your computer from the following applications:
Mac: Address Book, iCal, Microsoft Entourage, or Microsoft Outlook 2011
PC: Microsoft Outlook, Outlook Express, Windows Addressbook (XP) and Windows Contacts (Vista and Windows 7)
For more information about syncing your device with your computer, see the user's guide or see this article.

How to use ITunes France when you live in Uk ?

how to use ITunes France on IPad ou IPhone when you live in UK ?

Ok thanks,
but living in uk do you think I can manage both addresses France and London ID with Apple?
Can I keep my Apple ID UK ?
On my Ipad, I am automatically directed on the uk store . My IPhone could still work with the Uk ID if I change it for France one?
Sorry but I am a bit confused

How to use the custom control ?

Hi Friends,
plz help to use of custom control in screen painter ?
and how to use the custom control ?
Thanking you.
Regards,
Subash.

HI,
Screen Elements
A screen can contain a wide variety of elements, either for displaying field contents, or for allowing the user to interact with the program (for example, filling out input fields or choosing pushbutton functions). You use the Screen Painter to arrange elements on the screen.
You can use the following elements:
·        Text fields
Display elements, which cannot be changed either by the user or by the ABAP program.
·        Input/output fields and templates
Used to display data from the ABAP program or for entering data on the screen. Linked to screen fields.
·        Dropdown list boxes
Special input/output fields that allow users to choose one entry from a fixed list of possible entries.
·        Checkbox elements
Special input/output fields that the user can either select (value X) or deselect (value SPACE). Checkbox elements can be linked with function codes.
·        Radio button elements
Special input/output fields that are combined into groups. Within a radio button group, only a single button can be selected at any one time. When the user selects one button, all of the others are automatically deselected. Radio button elements can be linked with function codes.
·        Pushbuttons
Elements on the screen that trigger the PAI event of the screen flow logic when chosen by the user. There is a function code attached to each pushbutton, which is passed to the ABAP program when it is chosen.
·        Frame
Pure display elements that group together elements on the screen, such as radio button groups.
·        Subscreens
Area on the screen in which you can place another screen.
·        Table controls
Tabular input/output fields.
·        Tabstrip controls
Areas on the screen in which you can switch between various pages.
·        Custom Controls
Areas on the screen in which you can display controls. Controls are software components of the presentation server.
·        Status icons
Display elements, indicating the status of the application program.
·        OK field
Every screen has a twenty-character OK_CODE field (also known as the function code field) that is not displayed directly on the screen. User actions that trigger the PAI event also place the corresponding function code into this field, from where it is passed to the ABAP program. You can also use the command field in the standard toolbar to enter the OK field. To be able to use the OK field, you need to assign a name to it.
All screen elements have a set of attributes, some of which are set automatically, others of which have to be specified in the Screen Painter. They determine things such as the layout of the screen elements on the screen. You can set the attributes of screen elements in the Screen Painter - either for a single element, or using the element list, which lists all of the elements belonging to the current screen. Some of the attributes that you set statically in the Screen Painter can be overwritten dynamically in the ABAP program.
with regards,
sowjanyagosala

Need help how to use itunes card to download music

Need help how to use itunes card to download music

If you want to add the iTunes card to your account, then in the iTunes app on the iPad you should be able to scroll to the bottom of the Music tab and there should be a Redeem button - there is more info here : http://support.apple.com/kb/HT1574

How to use iTunes Match?

How to use iTunes Match?

CMARINEAU wrote:
Question: is there supposed to be a iCloud symbol next to every song that matches in iTunes? I only have "unavailable to match" clouds.
No. Tracks will only have a cloud in the "iCloud Download" column if they are unprocessed by iTM. If a track is deleted from the iTunes library and is available for download there will be a slightly different cloud icon in that column with an arrow pointing down to incidate it is available to download.
Tracks that have been processed or are resident in the iTunes library will have nothing in the "iCloud Download" column.

HT1212 I don't know how to use Itunes 11 So i can't unlock my phone

I don't know how to use Itunes 11 So i can't unlock my phone

If your iPhone is disabled, then you must use iTunes on your computer to restore iOS. You don't have to be an expert using iTunes, just follow the instructions here: http://support.apple.com/kb/ht1414

How to use itunes to restore my ipod classic

How to use itunes to resotre my ipod just got it and now i cant. please help it a classic ipod 30gb.

I'd try taking it to the nearest Apple Store and see what they have to say.

HT1414 how to use itune for iphone activation

how to use itune for iphone activation

Get the latest version of iTunes, your Apple ID and just connect the iPhone to your computer and iTunes will guide you through activation.

How to use itunes volume control in mainstage

Similar Messages

Maybe you are looking for