How to use JMF (pull)datasource class to access individual video frames?

Is there anyway of using JMF datasource or pulldatasource class to access individual video frames?
Edited by: pakkito on Apr 9, 2008 3:15 AM

Similar Messages

How to use the Pull List in Discrete Scenario?

Hi Gurus,
I am using pull list MF60 in REM.
How to use the Pull List for creating material reservations in Discrete Scenario also?
Anyone used this Pull list in discrete, pl share.
How is helpful in discrete scenario?
Srini

Hello,
You can use Pull list for st.location transfers, if you are into WM managed then this pull list used a lot.
You can use the pulllist to the max. extent. But with IM managed plant the use is limited and this is used only for storage location transfers.
Issue cannot be done for Production orders. You can bring the materials to the req. storage locations and after that you have issue in the order or manually for the order.
Regards,
Manick.

How to Use JavaScript in Controller Class...

Hi All,
Can any one tell me how to use JavaScript in Controller Class.
Requirement is:
I have
Radio Group(RG1),
Two Radio Buttons(RB1,RB2),
Two messageTextInput(MTI1,MTI2),
if i click RB1 i should Prompt to the end user to "Enter value for MTI1" or
If i click RB2 i should prompt "Enter value for MTI2" while submitting page.
Please let me know the steps to use JavaScript and the above client validation...
Regards
Alem...

Using javascript is against the standard. I can tell you a workaround instead of you setting the javascript, check if that would be acceptable.
You can use PPR and set the required property on the messageTextInput on clicking of the radio button. By doing this you will let UIX generate the javascript for you to handle the client side validation. But the validation will happen only on click of the submit button. The visual indicator is good enough to tell that the value has to be entered to the item.

How to use a pull down menu after the 2.0 update

Hi,
I'm looking for help on how to use a pull down menu after the latest update. The method I was using before no longer works and it's driving me crazy.
Has anyone else had this problem and figure out a new way?!
I was holding my finger down on the pull down menu and waiting for the options menu to pop up, I'd push cancel and the menu would stay. This no longer works.

Also would love to know plz

How o use JMF?

can someone tell me how to use JMF with particular programs?
Thanx..:)

i also have similar problem. how i use jmf in develop a program to capture image with webcam and capture it.wat should i do before this stage.thanks.....

How to use taglibs in JSP for Database access

Hi
Could any one please tell me how to use taglibs in JSP for Database access
with regrds
Jojo

This is a sample how to connect to a MySQL database with JSTL 1.0:
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ taglib uri="http://java.sun.com/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>JSTL MySQL</title>
<link href="styles.css" rel="stylesheet" type="text/css" />
</head>
<body>
<c:catch var="e">
<sql:setDataSource var="datasource" url="jdbc:mysql://Your_Server_Name_Here/You_Schema_Here"
                       user="Your_Username_Here" password="Your_Password_Here"
                       driver="com.mysql.jdbc.Driver"/>
<c:out value="datasource= ${datasource}, Class = ${driver.class}"/>
<br />
<br />
<sql:query var="deejays" dataSource="${datasource}">SELECT * FROM Your_Table_Name_Here</sql:query>
<table>
<%-- Get the column names for the header of the table --%>
<c:forEach var="columnName" items="${deejays.columnNames}"><th><c:out value="${columnName}"/></th></c:forEach>
<tbody>
<%-- Get the value of each column while iterating over rows --%>
<c:forEach var="row" items="${deejays.rows}">
<tr><c:forEach var="column" items="${row}">
        <td><c:out value="${column.value}"/></td>
      </c:forEach>
</tr>
</c:forEach>
</tbody>
</table>
</c:catch>
<br />
<br />
<c:if test="${e!=null}"><span class="error">Error</span>�
<c:out value="${e}" />
</c:if>
</body>
</html>And this thread might help you:
http://forum.java.sun.com/thread.jspa?threadID=639471&tstart=44

How to use LABVIEW to collect wireless network camera (with video server) video.

How to use LABVIEW to collect wireless network camera (with video server) video.I would like to use LABVIEW for a wireless network camera (IP Camera comes with the video server module)the client program.Will the ability to achieve?If feasible, how to do, there are examples, thank you.

I believe NI Vision is what you are looking for.

How to use EBW_DQ_SS for datasource 0UC_SALES_STATS_02

Hello All,
Could someone please guide me how to use the OLTP transaction code EBW_DQ_SS. It is mentioned in help.sap that we need to execute this t-code to update data to the delta queue of datasource 0UC_SALES_STAT_02.
I tried running this t-code with following selections:
Date ID: Current Date; Run ID = any key; Posting date: 1st Jan 2010 - 31st Dec 2010.
But however much I try, no data is updated to the delta queue. (Data is available in tables ERDK and ERCH)
Kindly help.
Thanks & Regards,
Labanya.

First In BW, execute infopackages:
Full u2013 returns 0
Init u2013 returns 0
Then Go to R/3, run EBW_DQ_SS. Select a date and deactivate old runs. Select a date 1 year in the future to be sure all old runs are deactivated. Unlock mass activity type and delete old runs.
Execute EBW_DQ_SS by entering your inputs.
The above mass activity run will populate the delta queue.
Then Run Delta Info pkg which will pull records into BW
Thanks
KPK

How to use JMF without download it?

hi all,
I have a Video conferencing using JMF
- transmission : an application (with capturing a webcam source and jmf installed)
- reception : an applet (display the video without jmf)
How could a remote user use the applet without download jmf?
Thanks a lot
Christel

hi,
I have tried this way but it doesn't work.
I have make a jar-file but there is not Manisfest inside.
My process:
1- Type of Archives -> "JAR de l'applet" (Jar of the Applet)
2- Name = JAR de l'applet
File = C:/CAV/RtpApplet/RTPApplet.jar (I don't know what i can put in this area)
I have also checked all CheckBoxes
3- Classes et ressources du projet (Classes and resources of the Project) -> I have check "Toujours inclure les classes et ressources" (always include classes and resources)
Add classes et packages : javax, com, rtpavc (my personal package)
4- Library = "AV" (which is the entire jmf.jar)
select the CheckBox "Inclure classes et toutes ressources requises" ( include classes and resources needed)
5- select the CheckBox "Inclure un Manifest dans l'archive" (include a Manifest in the archive)
Select the RadioButton : "Cr�er un Manifest" (Create a Manifest)
I have a jar-file (the "JAR de l'applet") but when i select it i have nothing inside and no Manifest-file.
I really don't know how it's working.
I really need your help,
Thanks in advance.
Christel

How to use jmf convert the rtp packet (captured by jpcap) in to wav file?

I use the jpcap capture the rtp packets(payload: ITU-T G.711 PCMU ,from voip)
and now I want to use JMF read those data and convert in to wav file
How to do this? please help me

pedrorp wrote:
Hi Captfoss!
I fixed it but now I have another problem. My application send me this message:
Cannot initialize audio renderer with format: LINEAR, Unknown Sample Rate, 16-bit, Mono, LittleEndian, Signed
Unable to handle format: ALAW/rtp, Unknown Sample Rate, 8-bit, Mono, FrameSize=8 bits
Failed to prefetch: com.sun.media.PlaybackEngine@1b45ddc
Error: Unable to prefetch com.sun.media.PlaybackEngine@1b45ddc
This time the fail is prefetching. I have no idea why this problem is. Could you help me?The system cant play an audio file / stream if it doesn't know the sample rate...somewhere along the way, in your code, the sample rate got lost. Sample rates are highly important, because they tell the system how fast to play the file.
You need to go look through your code and find where the sample rate information is getting lost...

How to use these method of class CL_GUI_PDFVIEWER

how to use these methods in the class CL_GUI_PDFVIEWER
1) CREATE_ANNOTATION
2) GET_ANNOTATION_INFO
3) SET_ANNOTATION_SETTINGS

Hi,
Refer
https://forums.sdn.sap.com/click.jspa?searchID=10926572&messageID=1803295
Regards
Kiran

How to use commit work in class cl_bls

Hi,
When i have used commit work after email sent,
it goes into dump.
Here is the code segment:
try.
    -------- create persistent send request ------------------------
      send_request = cl_bcs=>create_persistent( ).
    -------- create and set document -------------------------------
      pdf_content = cl_document_bcs=>xstring_to_solix( pdf_tab ).
      document = cl_document_bcs=>create_document(
            i_type    = 'PDF'
            i_hex     = pdf_content
            i_length = bytecount
            i_subject = sub ). "#EC NOTEXT
    add document object to send request
      send_request->set_document( document ).
    --------- add recipient (e-mail address) -----------------------
    create recipient object
      recipient = cl_cam_address_bcs=>create_internet_address( recip-recip ).
    add recipient object to send request
      send_request->add_recipient( recipient ).
    ---------- send document ---------------------------------------
      sent_to_all = send_request->send( i_with_error_screen = 'X' ).
     commit work.
      if sent_to_all is initial.
        message i500(sbcoms) with recip.
      else.
        message s022(so).
      endif.
------------ exception handling ----------------------------------
replace this rudimentary exception handling with your own one !!!
    catch cx_bcs into bcs_exception.
      message i865(so) with bcs_exception->error_type.
endtry.
What could be the reason?
Is there any way to use commit work in class while sending email as in SO_NEW_DOCUMENT_ATT_SEND_API1 fm?
Thanks.

Hi,
I have used
submit program.....
but in update task i have used it.
"Z_SD_ORDER_UPDATE".    program is a print driver program.
However error says:
There is probably an error in the program
"Z_SD_ORDER_UPDATE".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
I used submit as:
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
                  WITH output = ' '
                AND RETURN.
Instead of submit i want to use commit work but i also get a dump after commit work too.
How can i use commit work in above code?
Thanks.

How to Use Pattern and Matcher class.

HI Guys,
I am just trying to use Pattern and Matcher classes for my requirement.
My requirement is :- It should allow the numbers from 1-7 followed by a comma(,) again followed by the numbers from
1-7. For example:- 1,2,3,4,5 or 3,6,1 or 7,1,3 something like that.
But it should not allow 0,8 and 9. And also it should not allow any Alphabets and special characters except comma(,).
I have written some thing like..
Pattern p = Pattern.compile("([1-7])+([\\,])?([1-7])?");
Is there any problem with this pattern ??
Please help out..
I am new to pattern matching concept..
Thanks and regards
Sudheer

ok guys, this is how my code looks like..
class PatternTest
     public static void main(String[] args)
          System.out.println("Hello World!");
          String input = args[0];
          Pattern p = Pattern.compile("([1-7]{1},?)+");
          Matcher m = p.matcher(input);
          if(m.find()) {
               System.out.println("Pattern Found");
          } else {
               System.out.println("Invalid pattern");
}if I enter 8,1,3 its accepting and saying Pattern Found..
Please correct me if I am wrong.
Actually this is the test code I am presenting here.. I original requirement is..I will be uploading an excel sheets containg 10 columns and n rows.
In one of my column, I need to test whether the data in that column is between 1-7 or not..If I get a value consisting of numbers other than 1-7..Then I should
display him the msg..
Thanks and regards
Sudheer

How to use JMF in SWT

Hi all,
I want to create an application in SWT, which is able to play all types of music files. By using JMF i am able to do it in Swing, but i want to do it in SWT. (Should not use any AWT components).
Can any body tell how to do this ?
Thanks in advance !!

Hello,
I posted it in the correct forum itself, once again check your link... it is the same forum to which i posted.

How to use the opportunity stub classes to retrieve the opportunity objects

Hello ,
I have downloaded WSDL file for opportunity and i have created the stub classes by using axis as WSDL to java. Can any body suggest me , how can i use those created stub classes to retrieve the opportunity objects ?.
Thanks,
--bdr_09
Edited by: bdr on Feb 3, 2009 1:54 AM

http://java.sun.com/j2ee/tutorial/1_3-fcs/doc/Tools8.html#63055

How to use JMF (pull)datasource class to access individual video frames?

Similar Messages

Maybe you are looking for