How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

Similar Messages

How to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and a novice in interfacing skill ..so plzzzzz explain me in a litle detail

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Sir
We were able to solve that problem...but now could you advice as to which DC power supply we should use (preferably avalable in India) so that it can be controlled by Labview (through a gpib/rs232/any other port) to give a square wave of desired frequency/other parameters.
Regards
Shivam

How to use labview with gpib to connect with Agilent PNA E8362B ?

how to use labview with gpib to connect with Agilent PNA E8362B ?i am newbie ..just started to work on labview about a fortnite bck and +i am a novice in interfacing(networking... jst know tidbits) skill ..so plzzzzz explain me in a litle detail

Duplicate Post.

How do I read multiple channels at one time using labview with the Fluke Hydra Data Bucket 2620a using serial port?

I need to take a reading of 15 channels about once a second. I can read one value at a time using the monitor function on the read values.vi driver, but this takes forever to read all the channels.

I don't have this instrument but I took a look at the instrument driver and it appears that you can only configure one channel at a time to read from. You might want to take a look at the command set for this instrument and see if it allows for configuration of multiple channels. It could be that the instrument driver just doesn't have that built in.
J.R. Allen

How to use Labview6i with the LPT1 port ?

I am a beginer in Labview 6i on Windows NT. My DAQ card, which is not from National Instruments, is connected to the LPT1 port and I don't know how to configure and tu use it.
Maybe someone could help me.

Usherb,
The following link on NI website would be a good starting point:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/c80752c53094c296862565f3007ac765?OpenDocument
Refer also to the links included in this webpage.
Cyril
Cyril Bouton
Active LabVIEW Developper

Instructions on how to Use Tweeter With the iPad

Having difficulty posting messages using the iPad.

IMHO, forget about doing any meaningful Excel work an iPad unless you want to be a slave and spend 3-4 times the amount of time it would take to do inputs on a normal computer. Now, IF there was mouse support, then it might be worth the effort. I tried it and gave up.

How to use classes with the Movie Clips

Hi guys!I have a movie clip called teacher.It's assigned to a class called teacher.It has a location(room).I have multiple rooms and so i want the teacher to be only visible in the room it's at.I have two buttons for each room.The problem is the teacher doesn't disappear when it's in the playroom.
package {
          import flash.display.MovieClip;
          public class teacher extends MovieClip {
                    var room:String;
                    room="classroom";
                    this.croom=croom;
                    public function teacher() {
                              var teacher:teacher=new teacher();
                    if(teacher.room!==croom){
                              teacher.visible=false;
                    if (teacher.room==croom){
                              teacher.visible=true;
clroom.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
          croom = "classroom";
          classroom.visible = true;
          playroom.visible = false;
btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
          croom = "playroom";
          classroom.visible = false;
          playroom.visible = true;

Where is all of the code you just showed?
Only a portion of it is a class file's code, and of that class file's code, only a portion of it is valid. The paret where you have the conditional checking the treacher's roon is not incorporated proerly... it needs to be inside some function of the class.

How to use I18N with a custom validator?

This is my custom validator:
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            FacesMessage message = new FacesMessage("Not a valid e-mail address");
            throw new ValidatorException(message);
    }Instead of providing the text "Not a valid e-mai address", I'd like to get the text out of my ApplicationResources property file.
How can I do this?
I know how to use it with the provided validators, but not with own custom ones
Please help me out, thanks

I found a solution for this problem, I don't know it's best practice but here it is :
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        String errortext;
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            ResourceBundle bundle =
            ResourceBundle.getBundle("be.vdab.resources.ApplicationResources", context.getViewRoot().getLocale());
            errortext = bundle.getString("erroremail");
            FacesMessage message = new FacesMessage(errortext);
            throw new ValidatorException(message);
    }

How to use stylus with ipad2

Just bought a stylus for taking notes but do not know how to use it with the ipad2? Some special apps required?
Thanks!

Take a look at Memo, Penultimate, and Draw Pad to name a few. Several in the app store.But you do need an app that will accept input using a stylus or your finger rather than the keyboard. Several art/drawing programs are available as well.

How does it work with the iphone

i bought a time capsule but i don't know how to use it with the iphone, ipod, or ipad. can you please tell me the uses for those devices and how to use them?

TC has no direct relevance to any of the iOS devices..
They backup to iTunes on the computer, which is then backed up by Time Machine to the Time Capsule.
You can access files if you load an app like file browser.. but TC is not a media server .. it is a dumb hard disk and other than saving files there is nothing useful to do with the TC.

Using skype with the 3G

Hey, has anyone figured out how to use VoIP with the 3G on iphone? I heard that this is only available with wifi, which kind of makes it useless. I would love to get a plan with minutes, unlimited wifi... and then just get unlimited world calling from skype. Has anyone done this?

They don't do it because AT&T won't allow it. This is the same reason people cannot do FaceTime unless on WiFi.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

I need to program a Hittite Fractional-N Synthesizer Evaluation Kit with a HMC702LP6CE an external YIG oscillator. Not sure how to use Labview to control the PLL.

Here is how to use the PLL. But I don't know of how to interact with that device
http://zone.ni.com/devzone/cda/tut/p/id/3781
And for thouse who don't know what a PLL is a free bonus link is here:
http://digital.ni.com/public.nsf/allkb/07BC8D77D4E9AE258625708B007CE74F?OpenDocument
and a second one on what that device is: http://www.hittite.com/products/view.html/view/HMC702LP6CE
Now we are all caught up to speed.
Sam S
Applications Engineer
National Instruments

How to Use LABVIEW charts with Mathscript

Hi,
   I recently tried to work on Mathscript and it is really amazing. what I tried to figure out is:
    Instead of plotting using traditional "plot" statement, how to use LabVIEW chart ( I know how to Add output but the graph were not as expected
Is there any mean to get rid of this "Lengthy" delay that "ALL MATLAB User know" for first time compilation?
Thanks in advance
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology

Well Chris,
         I was about to post the solution, but as I said, I'm in a middle of experts
It took me 3 hours to figure it out. I should've checked your answer . I resolved to the same suggesstion of yours. I only added some functionality to get the newbies like me being acquainting with how easy to work with LABVIEW mathscript based on MATLAB knowledge.
Waleed El-Badry MSc.,MCPD, ISTQB Certified Tester
Assistant Lecturer
Mechatronics Department
Faculty of Engineering
Misr University for Science & Technology
Attachments:
Play with Mathscript.vi ‏35 KB

How to use LABVIEW to collect wireless network camera (with video server) video.

How to use LABVIEW to collect wireless network camera (with video server) video.I would like to use LABVIEW for a wireless network camera (IP Camera comes with the video server module)the client program.Will the ability to achieve?If feasible, how to do, there are examples, thank you.

I believe NI Vision is what you are looking for.

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process. Thanks

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process for my IPAd

I don't even know what it is, but have you explored the support available from the developer? http://www.roambi.com/iphone-videos.html

How to use labview with the handyboard

Similar Messages

Maybe you are looking for