How to use Labview6i with the LPT1 port ?

I am a beginer in Labview 6i on Windows NT. My DAQ card, which is not from National Instruments, is connected to the LPT1 port and I don't know how to configure and tu use it.
Maybe someone could help me.

Usherb,
The following link on NI website would be a good starting point:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/c80752c53094c296862565f3007ac765?OpenDocument
Refer also to the links included in this webpage.
Cyril
Cyril Bouton
Active LabVIEW Developper

Similar Messages

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

Instructions on how to Use Tweeter With the iPad

Having difficulty posting messages using the iPad.

IMHO, forget about doing any meaningful Excel work an iPad unless you want to be a slave and spend 3-4 times the amount of time it would take to do inputs on a normal computer. Now, IF there was mouse support, then it might be worth the effort. I tried it and gave up.

How to use classes with the Movie Clips

Hi guys!I have a movie clip called teacher.It's assigned to a class called teacher.It has a location(room).I have multiple rooms and so i want the teacher to be only visible in the room it's at.I have two buttons for each room.The problem is the teacher doesn't disappear when it's in the playroom.
package {
          import flash.display.MovieClip;
          public class teacher extends MovieClip {
                    var room:String;
                    room="classroom";
                    this.croom=croom;
                    public function teacher() {
                              var teacher:teacher=new teacher();
                    if(teacher.room!==croom){
                              teacher.visible=false;
                    if (teacher.room==croom){
                              teacher.visible=true;
clroom.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler);
function fl_MouseClickHandler(event:MouseEvent):void
          croom = "classroom";
          classroom.visible = true;
          playroom.visible = false;
btn.addEventListener(MouseEvent.CLICK, fl_MouseClickHandler_2);
function fl_MouseClickHandler_2(event:MouseEvent):void
          croom = "playroom";
          classroom.visible = false;
          playroom.visible = true;

Where is all of the code you just showed?
Only a portion of it is a class file's code, and of that class file's code, only a portion of it is valid. The paret where you have the conditional checking the treacher's roon is not incorporated proerly... it needs to be inside some function of the class.

How to use I18N with a custom validator?

This is my custom validator:
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            FacesMessage message = new FacesMessage("Not a valid e-mail address");
            throw new ValidatorException(message);
    }Instead of providing the text "Not a valid e-mai address", I'd like to get the text out of my ApplicationResources property file.
How can I do this?
I know how to use it with the provided validators, but not with own custom ones
Please help me out, thanks

I found a solution for this problem, I don't know it's best practice but here it is :
    public void validate(FacesContext context, UIComponent component, Object value) throws ValidatorException
        String errortext;
        Pattern pat=Pattern.compile(".+@.+\\.[a-z]+");
        Matcher m= pat.matcher(value.toString());
        if(!m.find())
            ResourceBundle bundle =
            ResourceBundle.getBundle("be.vdab.resources.ApplicationResources", context.getViewRoot().getLocale());
            errortext = bundle.getString("erroremail");
            FacesMessage message = new FacesMessage(errortext);
            throw new ValidatorException(message);
    }

How to use stylus with ipad2

Just bought a stylus for taking notes but do not know how to use it with the ipad2? Some special apps required?
Thanks!

Take a look at Memo, Penultimate, and Draw Pad to name a few. Several in the app store.But you do need an app that will accept input using a stylus or your finger rather than the keyboard. Several art/drawing programs are available as well.

How does it work with the iphone

i bought a time capsule but i don't know how to use it with the iphone, ipod, or ipad. can you please tell me the uses for those devices and how to use them?

TC has no direct relevance to any of the iOS devices..
They backup to iTunes on the computer, which is then backed up by Time Machine to the Time Capsule.
You can access files if you load an app like file browser.. but TC is not a media server .. it is a dumb hard disk and other than saving files there is nothing useful to do with the TC.

Using skype with the 3G

Hey, has anyone figured out how to use VoIP with the 3G on iphone? I heard that this is only available with wifi, which kind of makes it useless. I would love to get a plan with minutes, unlimited wifi... and then just get unlimited world calling from skype. Has anyone done this?

They don't do it because AT&T won't allow it. This is the same reason people cannot do FaceTime unless on WiFi.

How to communicate two PC's with the serial port with Netbeans

Do you know how to do it?
Do you know how to communicate with the parallel port too?
Could you give some ideas?
What commands or instructions I have to use?

What does NetBeans have to do with it?
All these "people" today that start out in Java using all these "nifty" IDE's. All it does is produce exactly this. They think their IDE is Java. Once they no longer have their one specific IDE in front of them, they can no longer function. They have no idea what the classpath, what the compiler actually does, how to package a jarfile, hell, most of the time, they don't even know how to execute a simple application.
As far as your question. Did you even try to Google for some Serial port API package? Assuming you did, did you download it and read the documentation that comes with it? Did you search for a few examples on the web? Did you read them? Did you try them? I can almost guarantee that the answer to everyone of those questions is "no". So, my question for you is, "Why should we help you?" You obviously have no desire to help yourself, so I think we should reciprocate in kind. Don't you?

Is anyone else experiencing problems with the thunderbolt port on their Mac Mini's regarding using it to connect a second monitor? I've got the Mini Display Port to DVI-D adapter along with a DVI-D cable and I can't get an image on the second monitor.

I had an dual display image / setup working twice for a few seconds, but then it cut out. I think there may be a problem with the thunderbolt port.

As far as I can tell you have only listed that you have a DVI monitor connected to the Mini Displayport socket (i.e. the Thunderbolt socket) via presumably the Apple Mini Displayport to DVI adapter and a DVI to DVI cable.
You don't appear to have listed what the second monitor is and how it is connected (even though not working). As such I cannot tell what may be wrong.

Can a USB Keyboard/Barcode reader be used with the USB port on the CRio

Is it possible to use a USB Keyboard or Barcode reader with the USB port on the CRio, I know you can use this port with a USB memory device, but what about other devices?
I have a project that requires that all hardware elements be connected to the controller and use the HMI purely for display,
anybody any ideas??

Hi kmoyna,
The standard CompactRIO range's USB host ports are not suitable for standard USB devices like keyboards or barcode readers - they are intended only for use of mass storage devices. From your description, it seems your project's requirements would be best met by the newer models, cRIO-9081 or cRIO-9082. These two units have Windows Embedded Standard 7 (WES7) and allow the direct connection of a monitor and standard USB devices. We now also have similar stand-alone CompactDAQ models running WES7 - cDAQ 9139.
I would recommend calling into your local branch to discuss your project further with one of our engineers. If you're in the UK, it's 01635 523 545 - or view contact details for other branches.
Regards,
Imtiaz Chowdhury
Head of Digital Technologies
Brand786

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process. Thanks

Somebody Knows how to use Roambi with Excel spreadsheet? I leed the process for my IPAd

I don't even know what it is, but have you explored the support available from the developer? http://www.roambi.com/iphone-videos.html

How do I text with the iPad 2 using cellular device?

How do I text with the iPad 2 using cellular device? I also have iPhone 4, can I use them both for texting?

The iPad doesn't have any text over cellular capabilities. You can use apps like Text Free to send texts to non-iOS devices, though.

How to use Terminal with KeySpan USB serial adaptor cable?

I own a KeySpan model USA-19HS to use with our MacBookPro when working on clients networking equipment that require serial communication. I have used ZTerm with excellent luck, but it costs, and is yet another application that I dont really want. I would like to know if any one out there has exacing instructions on how to use Terminal with this adaptor. If I could write a file that had, say, the couple most common settings (9600-8-n-1, 57600-8-n-1, et cetera) that I could simply click on, to open a new Terminal window with those settings, then simply close that, and open a new window (apple+n) in order to get back to a default settings terminal window. All feedback is most appreciated.
Thanks so much, Jason Sjobeck

Hi, Jason. Welcome to the Discussions.
You wrote: "All feedback is most appreciated."OK.
1. Have you considered discussing this with Keyspan Support?
2. Have you read the section "OSX has Terminal.app - why do I need ZTerm?" on the ZTerm Home Page? That seems to explain why one needs an app like ZTerm.
3. A quick search of Keyspan's FAQ for your product and terminal doesn't yield much more than how to find the serial ports using Terminal.
Likewise, this Google search also yields little, and variants of that search of such weren't particularly help either.
It appears your inquiry seems to be a somewhat esoteric topic.
4. Apparently, ZTerm X is a bit long in the tooth and there's no Universal Binary for it. It sounds, however, like you've tried it running on your MBP under Rosetta, yes?
5. In researching alternatives to ZTerm for you, I note the followng:• The comment from "Reverb" on this page suggests C-Kermit or Kermit as a free alternative.
• This tip on Mac OS X Hints cites Minicom as another option.6. You may want to try your question on the Unix Discussion.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to use authid with rwservlet via WebLogic Thin Client

1. Using J2EE Thin Client for WebLogic (WL) to submit interactive requests for Oracle Reports (App Server 10g) running on another server without SSO.
2. After starting basic Infrastructure, we start rwserver in batch mode (no other mid-tier components are used).
3. It appears that the cgicmd.dat file in the Thin Client conf directory on the WL server controls the DB access with the key:connect string info it has.
4. We had been allowing the testers to come in via the web through a SunOne (iPlanet/Netscape) web server instance, which in turn connects to the WL server running the Thin Client instance.
5. We noticed that anyone could run rwservlet to view report status with the showjobs command via a URL through the same mechanism as point #4 above, and were concerned about security of the reports - "bad".
6. Then someone realized the showmap command could also be specified, and thus see the DB connect string (Id/pw/SID) - "worse".
I researched securing Reports, and read through the white paper, "Securing Oracle9i Reports", and although it discusses security without using SSO, all it says is "users accessing a secured instance of Oracle9iAS Reports Services will be challenged to identify themselves by the Reports Servlet, using its own authentication mechanism (as with Reports6i)", but I can find no explanation of how that works, nor how it would work with the WL Thin Client.
Questions:
1. How are the Id's/passwords set up under AS 10g "as with Reports6i" in this environment going through the WL Thin Client?
2. Is there anything else that needs to be done to secure the created reports, and the connect string info (i.e. using authid with rwservlet?showjob, and not allowing the rwservlet?showmap to be executed at all)?
TIA,
ROC

the JDBC Developer's Guide (11gR2)
gives an example in chapter 9 under "JDBC Thin Driver Support for Encryption and Integrity", sub- "Setting Encryption and Integrity Parameters in Java"
from Oracle SQL Devloper, without redirecting the client to use the OCI/thick driver, choose, new database connection, connection type Advanced. add the entry from the example noted above to the Custom JDBC URL form.
for example:
Properties prop = new Properties();
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_LEVEL,"REQUIRED");
prop.setProperty(OracleConnection.CONNECTION_PROPERTY_THIN_NET_ENCRYPTION_TYPES,"(AES128)");
OracleDataSource ods = new OracleDataSource(); ods.setProperties(prop); ods.setURL(jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=xxxx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=xxxx)(INSTANCE_NAME=xxxx))));
Connection conn = ods.getConnection();
strange side note!, we could not get this to encrypt unless the sqlnet.ora file included the SQLNET.ENCRYPTION_SERVER=required. if this was set to default(accepted), and even though the jdbc thin client properties set to required, the network traffic was still clear text.
good luck

How to use Labview6i with the LPT1 port ?

Similar Messages

Maybe you are looking for