How to use MD5 format of string

i want to change a password string to md5 format
how can i do it

http://www.twmacinta.com/myjava/fast_md5.php

Similar Messages

How to use type cast change string to number(dbl)?can it work?

how to use type cast change string to number(dbl)?can it work?

Do you want to Type Cast (function in the Advanced >> Data Manipulation palette) or Convert (functions in the String >> String/Number Conversion palette)?
2 simple examples:
"1" cast as I8 = 49 or 31 hex.
"1" converted to decimal = 1.
"20" cast as I16 = 12848 or 3230 hex.
"20" converted to decimal = 20.
Note that type casting a string to an integer results in a byte by byte conversion to the ASCII values.
32 hex is an ASCII "2" and 30 hex is an ASCII "0" so "20" cast as I16 becomes 3230 hex.
When type casting a string to a double, the string must conform the the IEEE 32 bit floating point representation, which is typically not easy to enter from the keyboard.
See tha attached LabView 6.1 example.
Attachments:
TypeCastAndConvert.vi ‏34 KB

Can anyone answer this question? What is used to format a string so that it falls into a certain Row/Column in excel? see text for indepth question.

I'm attaching a file that may help. Just remember this is my FIRST attempt at using NI/FeildPoint so things that would be obvious to the normal users more than likely would slide right by me. So I'll try and explain what the text contains as to make my problem more clear. I'm using a FP-1000, FP-AI-100, and a FP-TB-10. i'm creating a application where I'm using the 8 channels from the FP-AI-100 to monitor a control system ,that we manufacture. The control system is in an environmental chamber. I use the FP-TB-10 to monitor the temperature while in the chamber. The control system is ran for 4 hours under varing enviromental conditions while I monitor vital system voltages with the FP-AI-100. Now the application that i'm building starts with the obvious FP CREATE.VI and so forth I have no problem communicating with the FP's, but the information that I'm monitioring needs to be placed into a file with Headers describing the information below it. Now I use a "WHILE LOOP.VI" to monitor the FP-AI-100 & FP-TB-10 for the 4 hour period. but before that I create and open a file where I use a "CONCATENATE STRINGS.VI" to enter the headers I need. I do this by CONSTANTS, CONTROLS, TABs, AND CARRIAGE RETURN being entered into the "CONCATENATE STRINGS.VI" in the order I want them to appear. I use ROW 1 to enter (OPERATOR:with a CONSTANT) an a (CONTROL so the operator may enter his name and be recorded into the file) using a TAB to seperate Columns and a CARRIAGE RETURNto drop down to ROW 2 for the next headers. I use header names and TABs to seperate the columns. This part works great. I end up with ROW 1 having the operator information then ROW 2 having the headers for all the channels I'm using to monitor the control system with in their own column. The trouble happens when I write to this file during the "WHILE LOOP". The information recorded for DATE:, TIME:, and Channel 0 of the FP-AI-100 end up right under their corresponding header on ROW 3, but the rest of the data ends up on ROW 4 in column 3 and goes down many rows with some of the data not being stored at all. It varies on how many rows are used starting at ROW 4 but hey always stay in column 3. I use the "FP READ.VI" outputing to a "ARRAY TO SPREADSHEET STRING.VI" outputing to a "CONCATENATE STRINGS.VI" for each channel within the "WHILE LOOP" then into the "WRITE.VI". I use the "CONCATENATE STRINGS.VI" to place my data OR atleast I thought you could do that some how I'm not quit doing something write either there is a sampling/timing issue or writing to file issue where things are being confused in the "WHILE LOOP" if someone know a better route to perform what I'm tring here I would be interested. Its not like I'm not giving it the old colledge try here but without proper training and the vagness of the manuals it's difficult to understand what every connection actually does.I'm tring though for everyone who happens to fill pity for me
Thanks for your help
John Morris
Glendinning Marine Product, Inc.
Attachments:
ALLchannels ‏273 KB

> I appreciate your effort to help me, but there is still a slight cloud
> in front of my eyes here.(I must mention that I'm using Labview 5.1
Oh, to bad. I'm using LV 6,02 and tried to save the application as LV5.1,
but it didn't work.
> Lets start with the easy one which is the SECOND main thing you
> wanted to mention. In my application I used individual Create Tag.vi's
> "so your saying that I can use just one Create Tag.vi and one Read.vi
> and what ever I use to display the values will automatically to show
> the individual channels" in other words if I use a "Indicator(DBL)"
> comming out of the Read.vi what ever I use in the "PANEL" layout will
> expand to show all 8 channel if I was using a FP-AI-100? Cool...
Allmost right. The 8 channels come out as 1D-array, ch0...ch7.
> #1--How do I change the delimiter (TAB) to a delimiter (comma) in a
> Array to Spreadsheet String.vi?
> ...cut
I don't use this Spreadsheet VI, because files coming out there allways
start this time consuming EXCEL wizzard. Because of this, I programmed my
own CSV-conversion vi. Maybe you could just use a common texteditor, like
wordpad and put the csv-examples from my last reply down to a text file
and rename it to *.csv. Texteditors terminate lines with "\r\n" by
default, so this is a very quick way for testing.
> FP_Analog_Logging example to record all eight channels it uses a Array
I didn't find the vi you metione above, but there is another good one:
Look at examples\FieldPoint\DataLogging\FP Logger.vi.
In a little case structure, at "false", there is a function called "Format
into string".
Pop up on the format string and adjust >>'\' Codes Display<<.
Then you change the format string into: %.;%-f%s
A Tab string is connected to the lower input of this function. Replace
this one with a comma.
That should do.
>
> #2--If using just one Create Tag.vi and one Read.vi and I have the
> Item Name listed as ALL I take it that the information comming out of
> the Read.vi is data for each channel in a String format starting with
> channel 0 and ending with channel 7 for the FP-AI-100.
Yes, just as explained above. If you put a indicator at the output to
display the values, you can expand the display to show all 8 channels, but
you can't name induvidual cells. In a array, all cells have identical
named labels. If you want to name the individually, you have to attach the
array to cluster function and put the indicator after this one. Enable
labe display and name the output values individually.
> #3--Now I use the following to "Format String" in the Array to
> Spreadsheet string.vi (%.4f)but I don't see anyway of changing the
> delimiter from (TAB) to (COMA)
Explained above.
> #4 you stated text strings need a "as prefix and sufix" and each
> string is seperated by a coma, a period is used as decimal number
> separator and lines have to be terminated by my question is
> WHERE IS THIS ACCOMPLISHED? WHAT VI OR WHAT CONNECTOR PIN?
Well, modifying strings are done with string functions.
Above, as I explained how the sample FP Logger.vi can be modified to do
the job for numbers. The pre- and suffixing with ", you only need for
strings, which EXCEL should interpret a string and as nothing else as a
string, even if there's a number inside. You usually need this only for
headers. So its easyest, if you just write your string into a string
constant or control and concatenate it to the previous csv-file contents.
Oh, I just see by looking at the above mentioned example... Inside the
case structure, but in the "true" case, there are error messages
concatenated to the logfile. At this point it is importent, to use " for
integrating the message into the CSV file, because a error message usually
looks like this: >> ERROR 2345 in vi yxz <<
Here you have text and number strings mixed in one line. EXCEL does not
know, if it should interpret the number inside the error line as separate
number, separating the line into three colums i.e. string before number,
number and string after number. So tell EXCEL by putting a " before and
after the line each.
For this, expand the Format To String function by one input, move down all
connections, to be able to insert a string constant with a " to the first
argument connector. Change the contents of the string constant at the
bottom argument from tab to ", (quotation mark AND comma)
> #5 You gave me an example of what a 3 column header could look like:
> "col0","col1","col2"\r\n Now is this something that you enter
> somewhere cause I know that \r is carriage return and \n is newline so
> I take it that the above is entered somewhere maybe in the Write.vi to
> the connector called Header (F)? See this is what confuses me because
> NI manuals have no examples of certain connectors types being used or
> any reference as to how they manipluate data with there varing type
> inputs. Or maybe I'm just missing them.
The example I mentioned above help here to.
Look at the Write File function. This function receves data from a
function named concatenate strings. Expand this function to have one more
spare input at the bottom. Create a string constant. Switch the constant
display to "\" mode. Enter "col0","col1","col2"\r\n into the constant.
Connect the constant to the spare input.
Doing this, every dataline in the csv file is followed by
"col0","col1","col2"\r\n .
I wish you a nice weekend,
Rainer Ehrt

How to use md5 Checksums to verify thousands of copied files

Hello,
So I need to be able to verify the succesful copy of thousands of files using md5 checksums.
is there a program for this or a string of code for terminal?
Please help.
Cheers.

I cover how to do that in the link above, but to quickly do this, run the following command on both folder paths:
find -s ~/Downloads -type f -exec md5 -q {} \; | md5
This will generate a list of md5 checksums for each file in the directory (in this case, the Downloads directory in your home folder, but you can change this to whatever you would like), and then create a summary checksum of the collective checksums.
In my case, the above command yields the following checksum:
42cf9632cf763cad84c633f0cc7c93bb
Doing this on my Documents folder yields the following checksum:
782845544f0ecf8a7ae5fa66197d6abd
You can then compare these to see if they are different. In this case they are, indicating the folders do not have the same contents.
Keep in mind this may take a while to run, as checksums will have to be computed for each file in the directory. While this is a raw command, you can save it in a script and then simply run the script with an input argument to make it easier. For example, the following script should work:
#!/bin/bash
find -s $1 -type f -exec md5 -q {} \; | md5
Saving this in a text file, naming it something like "dirsum" and then making it executable in a path location such sa /bin (or a custom added path) will make it easily accessible, so you can run the same command by simply typing the following in the Terminal (in this case to calculate a checksum of the Downloads folder):
dirsum ~/Downloads

How to use CSV format in making a data connection.

Hello All,
I have got a form to develop. There are over 1000 entries to be imported. Can I use CSV format to embed those data in the forms. Mainly those data would be embedded as dropdowns.If I can use how to do it ? If i can not use is there any better way without using the Database like MySQL or something.
Thanks.
Bibhu.

Hi Afroz,
To be more specific, if the csv file doesn't has header, please refer to this script to add header:
$csv = Import-Csv d:\haha.csv -Header "UserA","UserXYZ","EmailA"
Then you can loop this csv file to run the "add-mailboxpermission" cmdlet, I recommend you can test this script before running against production environment, please also note I haven't tested this script:
$csv = Import-Csv d:\users.csv -Header "UserA","UserXYZ","EmailA"
foreach($each in $csv){
write-host "assign fullaccess permission of user $($each.UserXYZ) on mailbox $($each.EmailA)"
get-mailbox -identity $each.EmailA | add-mailboxpermission -user $each.UserXYZ -accessrights 'fullaccess'
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to use currency format set

Hi All,
I have to use currency format set to mask the amount values to their respective currencies ,
i reviewed the Oracle XML Publisher Administration and Developer's Guide and followed all the steps mentioned there ,i m also quoting the same over here
To define a Currency Format Set:
1. Navigate to the Currencies page under the Administration tab. Select Create
Currency Format Set.
2. Enter a Name and a Code for the set. The Code is a unique identifier and cannot be
changed later. Select Apply.
3. The Currency Formats page will display for your newly created set.
To add currency formats to the Currency Format Set:
1. Select Add Currency Format to add a format to your set.
2. Select a Currency Name from the list.
Note: This list is generated from the FND currency table and
should include all ISO currencies. Additional currencies can be
added from the System Administrator responsibility.
3. Enter the Format Mask you wish to use for this currency and select Apply.
The Format Mask must be in the Oracle number format. The Oracle number format
uses the components "9", "0", "D", and "G" to compose the format, for example:
9G999D00 where
9 represents a displayed number only if present in data
G represents the group separator
D represents the decimal separator
0 represents an explicitly displayed number regardless of incoming data
See Using the Oracle Format Mask, Oracle XML Publisher Report Designer's Guide for
more information about these format mask components.
After a currency format has been created, you can update or delete it from the Currency
Formats page.
i followed all the above step ,i need to use germany currency ,i have also used the format-currency command in my RTF template,but still its not working ,i used 9G999D00 for masking .
Any hint would be very helpful ,thanks in advance .Please let me know if my question is not clear
Thanks
Pratap

hi all
Thanks ,this is resolved ,i just missed clearing cache ,after clearing the cache its working .
thanks
Pratap

How to use multiple formats in one JFormattedTextField

Hi,
I am looking for a way to allow multiple formats in the same JFormattedTextField. Let's say I want to allow input like:
a) 123-AB-123
and
b) AB-12345-CD
Of course I could use an InputVerifier of my own combined with regular expressions to see if the input matches. But I like the way JFormattedTextField supports the UserInput by displaying a Placeholder String. So the User sees what the input might look like.
I'd tried to write a FormatterFactory of my own, which will return either a MaskFormatter for a) or b) but the JFormattedTextField checks out the Formatter only when gaining or loosing focus. What should happen is that it checks out the formatter after each keystroke.
Does anyone know a solution for this or how I could force the FormattedTextField to REget it's formatter?
Thanks
Thimo

Check out the following; it provides code for a regular expression formatter:
http://java.sun.com/products/jfc/tsc/articles/reftf/
Unfortunately, this does not support the 'placeholder' notion like the MaskFormatter does, if that's what you were talking about. I'm not sure how you could cobble them together, since with the MaskFormatter you don't have to type the mask literal characters, but you would need to with the regular expression.
: jay

How to set MQMD format to String through JMS?

any inputs on how to set the message format (MQFMT) to string (MQSTrforcibly using JMS?
I have an application which writes a TextMessage to a remote Queue which is being received in MQHRF2 format.
This needs to be in MQSTR format.

According to "http://www.share.org/proceedings/sh98/data/S1104.PDF"
You can do something like
queue.setTargetClient(JMSC.MQJMS_CLIENT_NONJMS_MQ);
To set the Target as NONJMS client, so that it will accept Text message.
Hope this helps...

How to use quarter format in "to_date()" function?

Hi,
I'm trying to use to_date() function with quarter format. How do I specify the format?
For example to convert '2002 quarter 1' using the to_date function.
I tried to_date('20021', 'YYYYQ'), and I got ORA-01820 cannot appear in date input format.
Please help, thank you!!!

You cannot use Q when inputting data, only when retrieving data. When inputting, you must enter a valid date. Oracle has to store a date and if you just enter a quarter, it can't figure out what date to store. See the examples below:
SQL> -- test table:
SQL> CREATE TABLE test_table
2    (test_date DATE)
3 /
Table created.
SQL> -- the wrong way to input:
SQL> INSERT INTO test_table (test_date)
2 VALUES (TO_DATE ('2002-1', 'YYYY-Q'))
3 /
VALUES (TO_DATE ('2002-1', 'YYYY-Q'))
ERROR at line 2:
ORA-01820: format code cannot appear in date input format
SQL> -- the right way to input:
SQL> INSERT INTO test_table (test_date)
2 VALUES (TO_DATE ('27-OCT-2002', 'DD-MON-YYYY'))
3 /
1 row created.
SQL> -- to output:
SQL> COLUMN "Year and Quarter" FORMAT A16
SQL> SELECT test_date,
2         TO_CHAR (test_date, 'YYYY-Q') AS "Year and Quarter"
3 FROM   test_table
4 /
TEST_DATE   Year and Quarter
27-OCT-2002 2002-4
1 row selected.

Question regarding how to use XHTML format in Form

I have defined a form where the input interface is iv_text TYPE string and the format of the field in the form is in XHTML.
But when I set iv_text = 'Test'. The ADS does not interpret the XHTML and it generates me a PDF file containing this sentence.
Can someone help me?

look up for "Using formatters" in the FB help.
Essentially you'll instantiate a format, NumberFormatter for
numbers for example, and set it's properties like e.g. showing a
thousand separator and then one some event of the TextInput --
valueCommit for example -- you'll do something like:
ti.text = nf.format(ti.text)
this is would also give you opportunity to validate user
input using the same formatter and valid event.
ATTA

How to use many format data into a template?

How to design a template but it can interface from many format data?

This is the one from 2010 but should still work.
http://www.bfcnetworks.com/blogs/alexpearce/pull-sharepoint-2010-document-properties-into-word-quick-parts/
You basically create a new document in the library (must have the columns you want into the word document), then you use the Quick
Parts to insert the data where needed. Then you save this document as your template. Then anytime someone creates a document in the library when you open the document it will read from the columns of the item.
I used a workflow and had the users actually update a SharePoint list, then that in turn creates a new document in the document library and populate the columns from the list form. Then You can send that document link to folks to download / print or whatever.
Is that what you are talking about?

How do use different formatting for a distinct "Section"

I have experienced formatting problems with an older document after upgrading to Pages 2.
There was a distinct "section" within that document with a different "top" and "bottom" border. I find myself unable to change the top and bottom borders within just the Section I want to revise. When I try dragging the ruler on the page in question, it changes the settings for the entire document.
Questions:
(1) How do I ensure that one of my document's pages is, in fact, a distinct Section with its own formatting?
(2) How can I change the page setup of that Section independently of the rest of the document?
PowerMac G5 dual 2.0 Mac OS X (10.4.4)

Hello David,
now I'm back for your problem. You are right: the settings "Before" and "After" of the Layout Inspector are only for the areas at the Layout Breaks unlike the "Left" and "Right" number fields. If you have long Sections you have to use a workaround.
You have to insert a placeholder at the top and at the bottom of the pages to "simulate" the wider margins. But don't be frightened, you don't have to do it for every page. For that, Pages has the Section Master.
If you have a "Facing Pages" document, place rectangles (the placeholders) with no outline and with no filling at the top and at the bottom of a left and a right page. This rectangles should be adjusted in that way, so they have the same width like the text area and the same height you want to have for the wider Margins. Give the placeholder the "Fixed on page" setting in the Wrap Inspector and no "Extra Space". If you have a none "Facing Pages" document, you have to position the placeholder only on the top and the bottom of one page. Please notice the settings "First page is different" and "Left and right pages are different" of the Layout Inspector.
After you have placed the rectangles, select them and choose the menu item "Format/Advanced/Move Object to Section Master". Now you have the space at the top and the bottom of every page in that Section. Only the Section with the oversized images may not have the placeholders.
Excuse me, that I haven't mentioned the workaround the first time, but to write the Layout Border thing. I have forgotten that only the "Left" and "Right" border settings are for all pages.
Frank.

How to use "SPLIT" on the string

Hi,
i am using split on an internal table where the field in the table is a string.
the following is the code.
TYPES:BEGIN OF IT_MAT,
     MATERIAL TYPE STRING,
     END OF IT_MAT.
DATA IT_MATERIAL TYPE IT_MAT OCCURS 0
     WITH HEADER LINE.
and after populating the internal table with some string values
i am using this statement:-
split it_material at '|' into it_result_table-field1 w_remaining.
Here i am getting an error message saying that it_material must be a character-type data object.
please help me out in this
thanks
kumar

Hi kumar,
Please check this thread by clicking on the below link. It will solve ur problem.
Re: how to Split a String ?
Regards,
KK

How to use Windows formatted iPod nano to move music to a new Mac?

Hi all,
I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac and I came across this http://support.apple.com/kb/HT1329" guide at Apple Support site since I owned a iPod nano.
My questions is since my iPod nano is configured for Windows will the Mac be able to read it since it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
If I follow through the guide, 1. Switch the iPod to manual update and enable disk use, 2. Locating and consolidating the iTunes Media folder, 3. Copy iTunes folder to iPod. I will still need to restore the iPod to work in Mac and end up nothing left inside meaning songs, photo all erased.
Also, anyone using third party software like http://www.fadingred.com/senuti/ Can advise if it's good to use this? And if iPod nano configured for Windows can works with this?
Need other more solution other this to transfer the mentioned data to Mac.
Thanks.

darrengbl wrote:
I need to transfer my iPhone's musics, songs, apps and photo, etc to the Mac […] since I owned a iPod nano.
iPhone… iPod… iPod Nano… which one it is? You are trying to transfer music from what source, using what medium, and to what target?
I came across this http://support.apple.com/kb/HT1329"
it's stated clearly in the guide "While a Windows formatted iPod may work on a Mac, Apple supports this configuration only with iPod shuffle."
Where exactly is this stated? I am unable to find this statement in the KB article you mentioned. And are you talking iPhone or iPod? This KB article applies only to iPod.

Question regarding how to use XHTML format in Form Builder to generate PDF

Hi,
I have defined a form where the input interface is iv_text TYPE string and the format of the field in the form is in XHTML.
But when I set iv_text = 'Test'. The ADS does not interpret the XHTML and it generates me a PDF file containing this sentence.
Can some help me?

Hi,
I have defined a form where the input interface is iv_text TYPE string and the format of the field in the form is in XHTML.
But when I set iv_text = 'Test'. The ADS does not interpret the XHTML and it generates me a PDF file containing this sentence.
Can some help me?

How to use MD5 format of string

Similar Messages

Maybe you are looking for