How to use "SPLIT" on the string

Hi,
i am using split on an internal table where the field in the table is a string.
the following is the code.
TYPES:BEGIN OF IT_MAT,
     MATERIAL TYPE STRING,
     END OF IT_MAT.
DATA IT_MATERIAL TYPE IT_MAT OCCURS 0
     WITH HEADER LINE.
and after populating the internal table with some string values
i am using this statement:-
split it_material at '|' into it_result_table-field1 w_remaining.
Here i am getting an error message saying that it_material must be a character-type data object.
please help me out in this
thanks
kumar

Hi kumar,
Please check this thread by clicking on the below link. It will solve ur problem.
Re: how to Split a String ?
Regards,
KK

Similar Messages

How to use shortDesc in the disabled inputtext

hi,all
i encounter a problem,our team must use disabled inputtext when the text is only used to output string.
the reson we don't use outputext is if there is noting in the outputtext,there is nothing displayed.
how to use shortDesc in the disabled inputtext?
here is the code:
<af:inputText value="#{bindings.shortdesc.inputValue}" disable="true"
id="ot2" columns="25" shortDesc="#{bindings.longdesc.inputValue}"
simple="true"/>
thanks all

Hi,
........... I use JDev 11g ..............
If you make your inputText disabled -----> shortDesc will not be displayed.
You can make a workaround to achieve this by using popup as :
1- add showPopupBehavior inside your inputText as :
<af:inputText label="label1" id="it1" disabled="true">
                <af:showPopupBehavior triggerType="mouseOver"
                                      align="endBefore" alignId="it1"
                                      popupId="p1"/>
              </af:inputText>2- add a popup which will display your shortDesc text
<af:popup id="p1">
                  <af:outputText value="Sameh POPUP" id="ot1"/>
          </af:popup>I hope it is useful.
Sameh Nassar

Workflow Components : how to use SPLIT and JOIN ?

Dear all,
Because a Transition does not have any return of result, do you know how to use SPLIT and JOIN components ?
<activity name='"xyz">
<Transition to='act1'>
</Transition>
<Transition to='act2'>
</Transition>
</activity>
In this above example, the second transition towards act2 is never called (i.e. there is no condition for the first transition) because there is no return of result for the first transition.
Unfortunately, I didn't find any documentation about the SPLIT and JOIN workflow components. Do you have some information about these components ? How to use them ?
Thanks a lot.

<activity name='"xyz" andSplit='true'>
<Transition to='act1'>
</Transition>
<Transition to='act2'>
</Transition>
</activity>
The "andSplit='true'" will cause it transition to both act1 and act1.

How to use type cast change string to number(dbl)?can it work?

how to use type cast change string to number(dbl)?can it work?

Do you want to Type Cast (function in the Advanced >> Data Manipulation palette) or Convert (functions in the String >> String/Number Conversion palette)?
2 simple examples:
"1" cast as I8 = 49 or 31 hex.
"1" converted to decimal = 1.
"20" cast as I16 = 12848 or 3230 hex.
"20" converted to decimal = 20.
Note that type casting a string to an integer results in a byte by byte conversion to the ASCII values.
32 hex is an ASCII "2" and 30 hex is an ASCII "0" so "20" cast as I16 becomes 3230 hex.
When type casting a string to a double, the string must conform the the IEEE 32 bit floating point representation, which is typically not easy to enter from the keyboard.
See tha attached LabView 6.1 example.
Attachments:
TypeCastAndConvert.vi ‏34 KB

How to use split screen on a mac like on windows 7

how to use split screen on a mac like on windows 7

It does not function the same as windows, in that it does not have an automatic snap function. You can put multiple apps up side by side though. You might want to consider using Spaces instead.

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is

I just bought photoshop elements 13 last night. Today I am watching tutorial videos to show me how to use it, but the videos are showing me things I don't have. Asking me to click on tabs i don't have. Why is this? Is there another way I can learn? Or is my download messed up and not giving me everything I need?

Got a link showing us which video tutorials you're watching and examples of what's missing in your software?

How to use labview with the handyboard

Hi,
how to use labview with the handyboard
Thx...

I'm assuming you're talking about this, since you didn't provide a link for those of us who don't know what you're talking about.
As the other poster said, you didn't say how you want to use LabVIEW with it. If you want to write LabVIEW programs than run on the microprocessor, then you're out of luck. If you want LabVIEW to interact with it, then you've got a couple of options, SPI probably being the best, but it also has DI and AI that you could use to communicate with it - the DI's could be used as a parallel interface.
Message Edited by Matthew Kelton on 12-17-2007 02:21 PM

How to use PS to judge the existence of a folder in the specified directory and how to use PS in the specified directory to create to create the folder?(javascript)

1,How to use PS to judge the existence of a folder in the specified directory?(use javascript)
2, how to use PS in the specified directory to create to create the folder?(use javascript)
Thanks you!

Thanks you!

I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?

I downloaded the free trial for Adobe XI Pro but now I cant find it on my computer or figure out how to use it. The only thing I see that downloaded is Adobe Download Assistant. How can I access the program?

Assistanttolindsey the Adobe Download Assistant will download the installation files for Adobe Acrobat Professional XI. By default they are saved to your download folder. You can begin the installation process from there.

How can I find out the strings that will be presented to the UI

Hi All,
I am working on a Swing based application (Swing based UI)
I am requested to do the following on the bytecode of that application:
I am supposed to find out what strings from within that bytecode will be presented to the UI and what will be used for an internal usage.
i have no way of running the application to verify that, i can only work on the static bytecode files.
hard question ha?
Thanks,
EItan.

You would of course have to run it. Either via a VM or recreating a VM yourself.
As an example of that how would you figure out what string occurs in the following (pseudo) code?
String msg = (cnt > 1) ? ("files=" + cnt) : ("file=" + cnt);
if (cnt > 1) DisplayMessage(msg);

How to identify end of the string is ABAP

Hi friends,
     While I am doing an operation on a string, I want to identify the end of the string. In C we have <b>\0</b>. But in SAP how can we identify that we have reached the end of the string.
Sathish Reddy.

use this function and get there 1st character
CALL FUNCTION 'STRING_REVERSE'
     EXPORTING
          STRING    = ZFNAME
          LANG      = SY-LANGU
     IMPORTING
          RSTRING   = ZFNAME
     EXCEPTIONS
          TOO_SMALL = 1
          OTHERS    = 2.
IF SY-SUBRC EQ 0.
WRITE:/ ZFNAME.
ELSE.
WRITE:/ 'ERROR REVERSING STRING'.
ENDIF.

How-to use Excel for the XML file input?

Hello all,
Following our discussion with Gerhard Steinhuber on the very nice tutorial from Horst Schaude , "How to upload mass data via XML File Input" , I am starting this new discussion.
In the comments section of this previous cited tutorial, Rufat Gadirov explains how to use a generated XML from Eclipse instead of your XSD file as your source in Excel.
However, in spite of all the instructions, I am still facing the same issue in Excel when I try to save my file as XML : "The XML maps in this workbook are not exportable".
What I try to do is to create one or more Sales Orders with multiple Items in it from a XML File Input, using excel to enter data.
The part with the File input is working (if I directly upload my file to the webDAV, it creates a sales order instance with multiple items).
The only missing part is the Excel data input that I cannot make work. Any help on this matter would be greatly appreciated.
Here is my XML file that I try to use as a source in Excel before inputing data from Excel:
<?xml version="1.0" encoding="UTF-8"?>
<p:MySalesOrderUploadedIntegrationInputRequest xmlns:p="http://001365xxx-one-off.sap.com/YUUD0G3OY_" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<MessageHeader>
    <CreationDateTime>2015-03-02T12:00:00.000Z</CreationDateTime>
</MessageHeader>
    <List actionCode="01" listCompleteTransmissionIndicator="true" reconciliationPeriodCounterValue="0">
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
        <MySalesOrderUploaded>
          <MySalesOrderUploadedID>idvalue0</MySalesOrderUploadedID>
          <MyBuyerID schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeID="token">token</MyBuyerID>
          <MyDateTime>2015-03-02T12:00:00.000Z</MyDateTime>
          <MyName languageCode="EN">MyName</MyName>
          <MyBillToParty schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyBillToParty>
          <MyDateToBeDelivered>2001-01-01</MyDateToBeDelivered>
          <MyEmployeeResponsible schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MyEmployeeResponsible>
          <MySalesUnit schemeAgencyID="token" schemeAgencySchemeAgencyID="1" schemeAgencySchemeID="token" schemeID="token">token</MySalesUnit>
            <MyItem>
                <MyItemID>token</MyItemID>
                <MyItemProductID schemeAgencyID="token" schemeID="token">token</MyItemProductID>
                <MyItemDescription languageCode="EN">MyItemDescription</MyItemDescription>
                <MyProductTypeCode>token</MyProductTypeCode>
                <MyRequestedQuantity unitCode="token">0.0</MyRequestedQuantity>
                <MyConfirmedQuantity unitCode="token">0.0</MyConfirmedQuantity>
                <MyNetAmount currencyCode="token">0.0</MyNetAmount>
            </MyItem>
        </MySalesOrderUploaded>
    </List>
</p:MySalesOrderUploadedIntegrationInputRequest>
Thank you all for your attention.
Best regards.
Jacques-Antoine Ollier

Hello Jacques-Antoine,
I suppose that as you have tried to construct a map from the schema, you have taken the elements from the List level down. In this case I also can't export the map.
But if you take the elements from the level MySalesOrderUploaded down, you'll get the exportable map (screenshots)
Best regards,
Leonid Granatstein

What to do if I have 2 apple ID's.How to use one and the other just as a email?

I have 2 apple ID's, an old moble me email and a new Apple ID using my Gmail How to use the new @gmail Apple ID as my primary and the @me.com just as an email?

For the primary account sign in at settings > iCloud and for the secondary account sign in at settings > mail, contacts, calendars.

How to calculate length of the string in transformation file

Hello all
I have tried a number of ways and I am not able to calculate the length of the incoming field in transformation file for my data load. Here is the issue.
I have an incoming string of length 10 and I need to use it to update multiple dimensions which will need first 2, 4 ,6 , 8 characters respectively.
Now in transformation file ID=ID(1:2) works perfect. However, the BW InfoObject will have multiple values as shown below:
ID
Description
AB
Business
ABCD
Business Organization
ABCDEF
Business Line
ABCDEFGH
Product Family
ABCDEFGHIJ
Product Line
ABCDEFGHIJKL
Brand
I want to update my dimension for Business Organization. I need to update only the records where the length of the incoming string is 4. If I do ID(1:4), I will get the duplicate records and will see the ID less than 4 characters in rejected records. The latter is not such a big issue but the former one is as I need to fetch the right description as well. The formula should check the length and then only pass the record else a dummy value.
A formula to achieve this in the transformation file is what I am looking for.
Regards
Gajendra

Thanks Vadim for the quick response!
I am also trying something similar and really appreciate your input here. However, I am not sure if the conversion is really happening.
Here is what I have done:
But the strings <> 4 in length are still passing through.

32gig Memory on Macpro 8 Core - How to use it all the memory and processor speed

Hello Everyone,
I was wondering if any of you out there know a way to have my Mac Pro use more of the memory it has. I have 32gig of memory and I would like to have it use more processor power and memory if possible. I am aware you can use the "renice -10 -p PIDNUMBER"
How can I make it use more of the processors and memory my machine has. Ex. Running Photoshop or Final Cut, Imovie etc.

Using the Unix nice command raises the priority of a process, but software will use the amount of memory it needs. You cannot make a program use memory it does not need. Same with processor cores, if software is written to use only one processor or core you cannot make it use more, the software has to be designed for multi-threading to do that.

How to use "SPLIT" on the string

Similar Messages

Maybe you are looking for