How to use multiple addresses for a global vendor

Hi experts.
scnerios is.company has different plants in different countires.they have centrally agreed contract with vendor.now each plant create p,o is in different country how can we use that vendors local addresses in p.o because in vendor master we can define one addres at a time.so if that adrees is in other country.and plant creating p,o is in different how can select the local address of that vendor.
if option is partner function then how to use it.all adressess witl  be odering address of that vendor.his offices is alll the counties.
thanks

IQBAL,
You can maintain multiple addresses for the same vendor using international addresses.
First, you have to Activate International Address Versions for each country/language via config at
IMG: Flexible Real Estate Management (RE-FX) > Address Management > International Settings > Activate International Address Versions (You can do this even if you are not using Real Estate Management
Then, in the vendor master, address screen, select the "International Verion" button, select the address version and maintain your address.
If you have any programs that need to display or print these addresses, you will have to specifiy the address version to display/print. by default, the version (Field = NATION) is Blank.
I hope this helps.

Similar Messages

  • How to use multiple hierarchies for a single char in single query

    Hi,
    Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
    I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
    Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
    Thanks
    Jona

    Nope. Now way to do this.
    There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
    Regards,
    Beat

  • How to use multiple classes for each form

    Hi,
    I have created two forms using screen painter and now i want to use different classes for these two forms .
    I have declared the Sbo Connection in main class i.e. Set Application ,Connection Context() but while connecting to other classes
    for executing the code for that form SAP is not connected to that class.How to use multiple classes functionality i don't able to
    do that.Please provide some sample codes for that as it will be more helpful for me to understand.
    Thanks & Regards,
    Amit

    Hi Amit,
    In fact, its more advisable to use separate classes for every form that you use.  Have one common class, say, for eg., clsMain.cs which has all the connection and connectivity to other classes, wherein, the menu event and item event of this main class, will just be calling the menu / item event of other classes.
    The individual functionality of the child classes will be called from the item / menu event of the respective classes.
    Item event in clsMain.cs will be as below.
    private void oApplication_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
                SAPbouiCOM.Form oForm;
                BubbleEvent = true;
                try
                    if ((pVal.FormTypeEx == "My_Form1Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                        oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                        NameSpace.Repots.ClsForm1.ClsForm1_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
                    if ((pVal.FormTypeEx == "My_Form2Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                        oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                        NameSpace.Repots.ClsForm1.ClsForm2_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
    Now, in the individual classes, you can have their respective item events, which will be called from the main class, and the respective functionalities will occur.
    Hope this helps.
    Regards,
    Satish.

  • How to create Multiple Address for a single customer

    Respected Members,
    In tcode Xd01 we create on customer but there we can maintain only one address but sometimes a scenario can be that single customer can have different address .
    How to do that.Any exit is available to create multiple address with creation of single customer.
    This provision is given while creating a Business Partner.Tcode is BP .In this Address Overview tab is there and you maintain multiple address to single Busines partner.
    Same thing can we do for the customer.
    Any solutions or suggestions,please give me your support.
    Thanks

    Hello Manish,
    Unfortunately Customers have only one address. However you can use contact persons to store different addresses, or (in the Sales view) you can assign other partner functions with different addresses (e.g. one customer acting as the Sold-to partner may have different Ship-to partners).
    If these options do not meet your requirements, you could extend the customer master data with your own functionality and enhance transaction XD01 with your own screens for holding alternate addresses.
    Regards,
    John.

  • How to use multiple Interfaces for the same BS?

    Hi @ ,
    Is it possible to have a scenarion where i am using multiple interfaces in the same BS based upon some conditional field in the message.
    I amnot able to get the solution I know with condition editor I can have multiple receivers but in my scenarion based upon message fiels i have to decide which BAPI to be used and wht mapping and then post it to the same System
    Any help will be highly rewarded
    Regards

    Hi-
    Yes it is possible you can use multimapping for mapping the interfaces.
    To know more about multimapping see
    http://help.sap.com/saphelp_nw04/helpdata/en/21/6faf35c2d74295a3cb97f6f3ccf43c/content.htm
    Some more helpful links
    /people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible

  • How to use multiple connections for xcelsius dashboard via toggle button

    Can anyone shed some light on how to apply a toggle button for multiple connections using xcelsius dashboard.
    I created two SAP connections in my xcelsius dashboard.  The first connection uses query 1 (bottom ten customers) and the second connection uses query 2 (top ten customers).  I wanted to use a toggle button where the user would click Top Ten customers versus Bottom Ten customers.  Which ever the user clicks in the toggle botton would run that query.
    If the toggle button is not the way to handle this can someone explain a better approach to run either query in the same dashboard.
    Thanks,
    Joe

    Hi,
    I've never had to do this so have no practical experience.  However in theory you should be able to do the following (assuming the data connection type youu2019re using has the "Usage" tab):
    Set up the two connections as normal - On the usage tab set the detail query to Refresh before components are loaded and make sure that this is unchecked for the other query.  Set both queries to populate the same range so that one query will overwrite the other in the Xcelsius spreadsheet.
    Bind a toggle button to a cell e.g. A1
    Back to the data connections again and set the "Refresh on trigger" trigger cell to A1.  And set the "When Value Becomes" to either "On" or "Off" dependent on how you've set up the toggle button.  Repeat for the other query.
    Hope this helps,
    Paul

  • How to use multiple patterns for masking/format the input text

    Hi All,
    I am using Jdeveloper 11.1.1.5 and i have a requirement where i need to format my input Text value in these below patterns:-
    Format
    Example
    AA9A 9AA
    EC1A 1BB
    A9A 9AA
    W1A 1HQ
    A9 9AA
    M1 1AA
    B33 8TH
    A99 9AA
    AA9 9AA
    CR2 6XH
    DN55 1PT
    AA99 9AA
    For Example :-  If user puts value as EC1A1BB, it should automatically changed to EC1A 1BB
                                 if user puts value as W1A1HQ, it should be automatically changed to W1A 1HQ and so on..
    If it could have been one format , i might have followed this :- https://blogs.oracle.com/jdevotnharvest/entry/get_social_security_numbers_right
    But for multiple patterns i am not able to get through to the proper solution.
    Is there any way to achieve this ? Please suggest.
    Regards,
    Shah

    For the validation you should be able to use one regular expression where you add the logical or (|)  (check the doc http://docs.oracle.com/javase/6/docs/api/java/util/regex/Pattern.html) between the groups. If none of the patterns matches you have an error.
    For the for formatting I'm not sure you can use only one expression.
    I suggest to write one method which does the checking on and the formatting may be using an array of patterns to check and iterate the patterns in a loop. Once you found a match you can read the needed format from another array (or an other dimension if you prefer to use a multidimensional array).
    Timo

  • Maintain multiple address for vendor

    User purchase article from vendor A at addess#1 but returned article back to vendor A via address#2. Vendor has 2 different departments handling delivery and returns.
    How can I configure 2 adddress for the same vendor code?
    If I had to used a partner function, what suggested partner function should I used?
    My PO order entry currently only accept vendor code.
    Suppose I need to add in a partner, like sold-to and ship-to in SD, is there a way to configure the screen?
    Where do I do it.
    Thanks
    bye

    Hi Colin,
    What is the bussiness reason for multiple addresses for the same vendor?
    If the vendor maintains several different physical locations at different addresses, then they should be created as different vendor master records. Then, if they all use the same payment office, they can be partnered to the same invoicing vendor.
    If you need to add a seperate address for the supplier location, payment location, billing location, etc, then you must create each of them using the correct account group and use partnering to tie them all together.
    Also, there is a way to maintain multiple addresses for the same vendor - but this is used for maintaining different international versions of the same address. (See the international button) - which requires some configuration in central address management.
    Or,
    Go for one-time-vendor concept else it is not possible .
    Also,
    Partner function can be used to maintain different address.
    This is the advantage of keeping the partner function in vendor account groups.
    You create different vendor codes for different addresses and assign the same.
    Regards,
    Rahul.

  • How to pass multiple addresses per vendor in PO create BAPI?

    Hi Experts,
    We have a requirement to pass multiple addresses for one time Vendor in a PO creation BAPI. But when I checked BAPIs there is a table for partners and address details are not present in that (type BAPIEKKOP).
    Is there any way where I can pass these multiple phone nos, emails, etc for one time Vendor through BAPI?
    These multiple phone nos, emails etc should be available in ME23N -> Header -> Partners (VN) ->details in communication.
    Please suggest a way to achieve this.
    Thanks,
    Anand

    Hi,
    Vendor address details are coming from Vendor data. While you checking the vendor details from ME23N it navigate to FK03.
    So if need to change any thing any vendor address then you need do that first then create the PO.
    This address not related to PO.
    Thanks
    Subhankar.

  • How do I use multiple addresses at one time?

    Shouldn't the Adobe server page that allows for the entry of a recipients address tell users how to add another address?  Do we separate them with semicolons? Commas?  Or is it even possible to use multiple addresses?

    Yes, Adobe Send.
    Unfortunately, it is NOT spelled out on the page where you enter email addresses of recipients, nor is it revealed if you click on the question mark box by email address.
    Frank
    =========================
    Frank Schmalleger, Ph.D.
    Distinguished Professor Emeritus
    The University of North Carolina
    Website: www.schmalleger.com
    Amazon Author Page: http://tinyurl.com/78nly4s
    Mailing Address:
    Ste 203-332
    4300 S. U.S. Hwy 1
    Jupiter, FL 33477
    Ph. 561.225.1760

  • How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

    Hi All,
    Hope to you a very happy new year,
    I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
    I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
    So my quetion is below:
    How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
    Thanks in Advanced,
    Ahmed,

    To add to Scott's post.  Option 60 would be useful if you needed to put certain types of AP on specific controllers.  Otherwise, no real need to use it for the most part.
    Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
    Now, on an IOS switch, you can only configure one option 60 per DHCP scope
    HTH,
    Steve
    Please remember to rate useful posts, and mark questions as answered

  • How to use multiple languages in unity connection for greetings

    Hi All,
    I have unity connection 7.5 Version. i want to use multiple languages for greetings. i mean i have different users from different geographical location. so i want to use engilsh, french and spanish. can i customize my setup like that.
    Regards
    Pardha

    Are you talking about the user greeting? Then have them record the greeting anywhere they want in whatever language they want.  If you install multiple locales you can have each user record greeting in different language as well and then the appropriate language greeting will be played on who addresses this user by using "inherit language" feature. Though this will only work when addressing messages from withn voicemail, not by dialing from phone as that will simply use the default routing rule, unless you create custom rules.
    HTH,
    Chris

  • How to uploade multiple flatfiles for single transaction using BDC?

    How to uploade multiple flatfiles for single transaction using BDC?

    Hi,
    You need to upload all data files into an internal table first either using OPEN DATASET (application server files) or GUI_UPLOAD (PC files).
    Then loop at the internal table and call BDC transaction to process the data.
    Regards,
    Ferry Lianto

  • How to use multiple tape drive for single filesystem on single client.

    Hello All.
    I want to backup single filesystem with multiple tape drive.
    Incase of Symantec veritas netbackup "NEW_STREAM" for multi-stream backup.
    Backup client has a  single backup filesystem like /data1  directory with 4 LTO6 drives.
    /data1 directory doesn't have a sub-direcotry, just present a files.
    If /data1 directory has a sub-directory like /data1/aaa, /data1/bbb, /data1/ccc , Is it possible to use multiple drives?
    Please anybody answer the questions.
    Thanks advanced.

    See how to use multiple tape drive from single client when I want to backup single filesystem?

  • How to use multiple selection parameters in the data model

    Hi, after have looked all the previous threads about how to use multiple selection parameters , I still have a problem;
    I'm using Oracle BI Publisher 10.1.3.3.2 and I'm tried to define more than one multiple selection parameters inside the data template;
    Inside a simple SQL queries they work perfectly....but inside the data template I have errors.
    My data template is the following (it's very simple...I am just testing how the parameters work):
    <dataTemplate name="Test" defaultPackage="bip_departments_2_parameters">
    <parameters>
    <parameter name="p_dep_2_param" include_in_output="false" datatype="character"/>
    <parameter name="p_loc_1_param" include_in_output="false" datatype="character"/>
    </parameters>
    <dataTrigger name="beforeReport" source="bip_departments_2_parameters.beforeReportTrigger"/>
    <dataQuery>
    <sqlStatement name="Q2">
    <![CDATA[
    select deptno, dname,loc
    from dept
    &p_where_clause
    ]]>
    </sqlStatement>
    </dataQuery>
    <dataStructure>
    <group name="G_DEPT" source="Q2">
    <element name="deptno" value="deptno"/>
    <element name="dname" value="dname"/>
    <element name="loc" value="loc"/>
    </group>
    </dataStructure>
    </dataTemplate>
    The 2 parameters are based on these LOV:
    1) select distinct dname from dept (p_dep_2_param)
    2) select distinct loc from dept (p_loc_1_param)
    and both of them have checked the "Multiple selection" and "Can select all" boxes
    The package I created, in order to use the lexical refence is:
    CREATE OR REPLACE package SCOTT.bip_departments_2_parameters
    as
    p_dep_2_param varchar2(14);
    p_loc_1_param varchar2(20);
    p_where_clause varchar2(100);
    function beforereporttrigger
    return boolean;
    end bip_departments_2_parameters;
    CREATE OR REPLACE package body SCOTT.bip_departments_2_parameters
    as
    function beforereporttrigger
    return boolean
    is
    l_return boolean := true;
    begin
    if (p_dep_2_param is not null) --and (p_loc_1_param is not null)
    then
    p_where_clause := 'where (dname in (' || replace (p_dep_1_param, '''') || ') and loc in (' || replace (p_loc_1_param, '''') || '))';
    else
    p_where_clause := 'where 1=1';
    end if;
    return (l_return);
    end beforereporttrigger;
    end bip_departments_2_parameters;
    As you see, I tried to have only one p_where_clause (with more than one parameter inside)....but it doesn't work...
    Using only the first parameter (based on deptno (which is number), the p_where_clause is: p_where_clause := 'where (deptno in (' || replace (p_dep_2_param, '''') || '))';
    it works perfectly....
    Now I don't know if the problem is the datatype, but I noticed that with a single parameter (deptno is number), the lexical refence (inside the data template) works.....with a varchar parameter it doesn't work....
    So my questions are these:
    1) how can I define the p_where_clause (inside the package) with a single varchar parameter (for example, the department location name)
    2) how can I define the p_where_clause using more than one parameter (for example, the department location name and the department name) not number.
    Thanks in advance for any suggestion
    Alex

    Alex,
    the missing thing in your example is the fact, that if only one value is selected, the parameter has exact this value like BOSTON. If you choose more than one value, the parameter includes the *'*, so that it looks like *'BOSTON','NEW YORK'*. So you need to check in the package, if there's a *,* in the parameter or not. If yes there's more than one value, if not it's only one value or it's null.
    So change your package to (you need to expand your variables)
    create or replace package bip_departments_2_parameters
    as
    p_dep_2_param varchar2(1000);
    p_loc_1_param varchar2(1000);
    p_where_clause varchar2(1000);
    function beforereporttrigger
    return boolean;
    end bip_departments_2_parameters;
    create or replace package body bip_departments_2_parameters
    as
    function beforereporttrigger
    return boolean
    is
    l_return boolean := true;
    begin
    p_where_clause := ' ';
    if p_dep_2_param is not null then
    if instr(p_dep_2_param,',')>0 then
    p_where_clause := 'WHERE DNAME in ('||p_dep_2_param||')';
    else
    p_where_clause := 'WHERE DNAME = '''||p_dep_2_param||'''';
    end if;
    if p_loc_1_param is not null then
    if instr(p_loc_1_param,',')>0 then
    p_where_clause := p_where_clause || ' AND LOC IN ('||p_loc_1_param||')';
    else
    p_where_clause := p_where_clause || ' AND LOC = '''||p_loc_1_param||'''';
    end if;
    end if;
    else
    if p_loc_1_param is not null then
    if instr(p_loc_1_param,',')>0 then
    p_where_clause := p_where_clause || 'WHERE LOC in ('||p_loc_1_param||')';
    else
    p_where_clause := p_where_clause || 'WHERE LOC = '''||p_loc_1_param||'''';
    end if;
    end if;
    end if;
    return (l_return);
    end beforereporttrigger;
    end bip_departments_2_parameters;
    I've written a similar example at http://www.oracle.com/global/de/community/bip/tipps/Dynamische_Queries/index.html ... but it's in german.
    Regards
    Rainer

Maybe you are looking for