How to use my own domain and integrate to my Muse Website

Hello guys, how are you doing?
First of all, i'm sorry for my english, i hope you understand my words and my questions lol
Well, i just created my website using Adobe Muse, then, using my 30 trial days, created my blog with Adobe Business Catalyst.
On my website, i created a page called Blog and used a Widget by MuseGrid, but now i need to link my Blog to my MuseWebsite.
I also have my own Domain. For example, my domain is www.vittafilms.com, so, when i click in the button Blog, i want it linked directly to my BC blog, but like www.vittafilms.com/blog
How can i do it? I hope you understand guys,
Cheers,
Felipe C.

Hi Havier,
Here are the basic steps: http://helpx.adobe.com/business-catalyst/using/change-site-domain.html
Let me kow if you come across any issues at any point.
Kind Regards,
Alex

Similar Messages

How to use my own DTD and table using the XML SQL utility.

Hey,
Here is my question. I have succesfully installed Oracle XML SQL utility and I had played around on that. Now I have my own DTD that too from Rosettanet(PIP). Tell me how can I use my own table, and my dtd using the existing utility. What are all the changes do I need to do. I am strugling it from past 4 days. I couldn't. Please help me!

Hi chris,
Yes, the SQL can be changed only by using Discoverer Administrator.
Open the report/workbook that is based on the custom SQL that you want to change in Discoverer Plus. Look at the Folder that is being used to select the columns of the report.
Open up the Discoverer Administrator with the id that has access to the tables referenced in the report. And the custom folder with the same name as in Disc Plus would be listed down in the Business Area (Which Business Area the custom folder belongs to can be determined with the help of disc plus).
Just open up that folder, and change the SQL in it. You can pasted your new sql in there and click on Validate SQL to validate it for errors. If no errors, then the custom folder is successfully changed.
In order to have it reflected, close your existing disc plus session and reopen it, and you can go about using the custom folder.
Hope this helps!
Thanks.

Using your own domain name on your Verizon personal website

If you go to the Verizon Site-Builder page and then click FAQ, you read this for #13:
13. Can I use my own domain name? Answer: If you own a domain name and would like to use it as the main address of your site, you will need to make arrangements with your domain name provider to redirect visitors to your Verizon Online mysite.verizon.net address from your current domain name.
Verizon Online does not currently offer personalized domain name registration, but we are working on providing this option to you in the near future. Updates will be provided on the Site Builder home page, so check back often.
The above statement has been listed for quite some time. Does anyone know whether this option is now available? (There's no updated statement about it on the Site Builder home page, and there is no one to ask!)

Verizon Your Domain - $19.95 / year
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

How to create a Blog in Business Catalyst and integrate into a Muse Website

Hello guys, first of all i'm sorry for my poor english.
Let's go.
I just created a website in Muse. Now i need a Blog. I have my own domain, but i need to integrate it on Business Catalyst. I tried to find it on many foruns, even here, but seems like i don't find the answer. Can you help me guys?

Hi,
take a look to this video series
Adding a Business Catalyst Blog to your Adobe Muse website
If you still have question, let us know.

How do i use my own domain name with creative cloud?

how do i use my own domain name with creative cloud?
i don't want to post web pages from behance.net. i want to use the domain name i have for my material. is there a hosting service for this? if not, can someone give me some pointers so I can publish?
thanks!!
Lori

http://forums.adobe.com/community/behance is where you would ask about publishing to "something else" from that program
I use OLD Dreamweaver, and upload my HTML with an FTP program to my own web site... I will GUESS you can do that, if you can save HTML to your hard drive to then be able to upload to your web site

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I am trying to publish a web site using my own domain. How do I transfer my host to mac from another server?

I've created a CNAME entry to redirect the domain to apple but the site is still not live! Can anyone help please?
Did you also do what is required in the .Mac account settings?
http://help.apple.com/mac2/1/help/member/pgs2/memfmsetgen367.html
Could you provide your urls?

We love apple email, but it does not play wall with other venders when you want to use your own domain (lags, disconnections, etc.)? What vendor should we use to make it push and work well? We want to stay with Apple Mail.

Help, our AppleMail does not play well with other Vendord to use our own domain. iCloud mail works great, but so far others we have tried lag, disconnec, etc. not nearly as good as icloud mail. Should we try exchange or office 365 plans with Apple Mail/ a lot more expensive?

Microsoft Exchange is the best business solution, Office 365 will give a hosted version that works well, as you noted it is not the cheapest. You should also look at Zimbra, an excellent service.

If I use my own domain with mobileme, does it work with google search?

I've noticed something, I used to only access my page with web.me.com/NAME and it shows up relatively at the top of of the google search results when I search for NAME or things related to me.
Since then I have started using my own domain which I have bought from godaddy.com. Now I'm not sure if I am doing it right, but at godaddy, I setup this forward to web.me.com/NAME as a 301 site move. When I type in my own domain, it gets redirected ok but the problem is it never shows up in google. It doesn't show up if i search for "mydomainname" or "mydomainname.com" or anything.
Any ideas? Does forwarding (cloak) does not work with search engines?

You are referring to IP addresses and Nameservers. You DON'T need these if you are using CNAME forwarding. They are not required.
Normally, when you set up CNAME forwarding you would delete the A record and set-up CNAME in its place. At least this is what I had to do when I used CNAME forwarding with MobileMe. I went to my DNS settings and there were A records against both @ and www. I had to delete both of these and set up new records, one for @ with CNAME that pointed to web.me.com and then the other for www, CNAME that also pointed to web.me.com.
What you have done sounds right, in that your domain name is pointing to web.me.com that is where your new website is with iWeb/MobileMe.
I think your problem is due to your old website that you created with Microsoft Office Live. You seem to have used the same domain name with this? If so, have you deleted your old site that you created with Microsoft Office Live?
I don't quite know how Microsoft Office Live works, but I know that you can create a site with them quite quickly using their templates and colour themes, although it is limited as to what you can do and probably is not as good as iWeb. Did you register the domain name through them and then publish? How do you publish to their server? You need to remove this site totally from the server so that your domain name will just be linked to your iWeb/MobileMe site.
I think the problem lies with your old site and Microsoft Office Live rather than your CNAME settings at GoDaddy. Investigate this first.

How to use the selection profile and status profile for production order?

Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shi

Hi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM

How To Use Your Own Router with Out Loosing Verizon's FIOS Services

How to use your own router with Verizon’s FIOS Service
First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal. Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity. The fiber cable terminates at the Optical Network Terminal or ONT for short. The ONT converts the optics into a digital signal that can be utilized by ones equipment. From the ONT your video, phone and internet are provided to the location. This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable. It is important to identify and understand the differences of these two setups. In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port. Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router. There are multiple methods for doing this and I would recommend investigates which one make the most sense.
In my particular case the IP signal was provided by Ethernet. Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge. This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.
The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT. I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs. These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition. At the very least they can point you to the right direction. Once you have a NIM the rest is rather simple.
Log into the current Verizon Router.
Located the router’s MAC address and copy it down.
Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.
Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
Example:
IP-STB1
Connection Type: Ethernet
* IP Address: 192.168.1.100
IP Address Allocation: DHCP
*MAC Address:                07:73:fFe:ad:8b:3f
* Things you will need to write down
Go to the network section and look for the main Ethernet connection. Select this and then select more setting, typically found at the bottom. Release the current lease.
Remove the Verizon router
Install your router
Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s (note their IP’s start at 192.168.1.100)
Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.
Add the port forwards from Step 5 above.
Clone Verizon’s Mac Address utilizing the info from step 2
Finish setting up the router in typical fashion.
Unplug and re-plugin your STB’s and test functionality. It’s best to try using a widget or Movie on demand function.
Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.
EVERYTHING should be working at this point.

3 Go to the port forwarding section and copy down the Applied Rules.
Example:
Network Computer/Device: 192.168.1.100:63145
Application & Ports Forward: Application UDP Any -> 6347
Note: There may be up to three entries for each one of your Set Top Boxes.G
Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
whatever, the STB's start at 192.168.1.100 and icement by 1 for each
the port addr's will be 63145 alo incrementing by 1
there is 1 entry for each in my pf list
however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
Why do you clone the mac addr??

Using my own domain

Hi,
I have my own domain for personal purposes. All email to my own domain email account forward to my @btinternet.com mail address, when I was using BT webmail through Yahoo I could send and receive emails using my own domain email address but with new BT webmail I can only send using my @btinternet.com address with a reply-to of my domain.
Is there any way I can get the old functionality back?
Thanks
SM

SillyMan wrote:
Hi,
I have my own domain for personal purposes. All email to my own domain email account forward to my @btinternet.com mail address, when I was using BT webmail through Yahoo I could send and receive emails using my own domain email address but with new BT webmail I can only send using my @btinternet.com address with a reply-to of my domain.
Is there any way I can get the old functionality back?
Thanks
SM
I do exactly the same as you, only the other way round. I forward residual mail from my BT accounts to my domain mail, and use my domain mail as my main email account (and I access that not via webmail but by downloading to my desktop with pop3/smtp and an email client - MSOutlook). If you use mobile devices then you may prefer to use either IMAP or pop3 with mails left on the server.
ISPs are not committed to email, and several of the mass market ISPs like BT, have recently got into the habit of shifting providers, and it generally isn't good news for customers. Sky had a bad time moving customers TO Yahoo email, and BT are having a difficult time moving customers AWAY from Yahoo to OpenWave, and Virgin Media ported all their email to Gmail.
liquorice is right - it's easier to be in control by paying the very small amount of money required for a domain name and a few email boxes then setting up your ISP and any other email addresses to forward TO the domain mailbox.
If/when I am migrated from BTYahoo to BTMail, I will simply set up the forwarding again on the new BTMail interface, root out who is still sending me mail on my BT addresses and try and get them to stop, and then hopefully forget about BTMail completely.
BT will be delighted, as it will save them money, save them support costs and save them bandwidth.

Using my own domain with iCloud email

I've had my own domain and email address for over a decade, and it's lasted me through a number of providers. Is there any reasonable way to use it with iCloud? It seems like iCloud is tied to a new .me email address, and it's not like I'm going to change my everyday email address to use it.
—Andreas

Hi,
I have found away that I think may help you.
Background as to why I use it. I have a @me.com address and Gmail but my contacts only know my Gmail account but I wanted to use cloud email so it would sync properly across all my devices, MBP, iPad and iPhone and also have the push email that the previous Mobile Me had and iCloud has now
So what I have done on my MBP is this. I use Mail.
You need to go into system preferences and select iCloud...in here turn off Mail and Notes.
Now open Mail and select preferences. Then select accounts. Delete all accounts there.
Now set up a new account by pressing the + button. After that enter the details as if you were setting up to use your Me.com account and press CREATE.
You now go to a page where you can edit all your mail settings manually. In the first section of the page you have:
Account Type - This should say - iCloud IMAP
Description - This can be described by you to be anything
Email Address - This is the email address you want people recieving the email to see
Full Name - As it says put your name
Incoming Mail Server - If you want the mails to come from iCloud then use: p99-imap.mail.me.com
User Name: The user name of the icloud
Password: the password of icloud
**Note** In this section you are putting in where you want the mails to come from. In this case I wanted the mails to come from iCloud so I forwarded all my mails from my Gmail account to my @me.com address, and then got iCloud to deliver them.
Outgoing Mail Server: Now this is the interesting part. I have changed this to the GMAIL server on my Gmail account. I have done this as I want my mails saved also at my Gmail account so by routing them through Gmail this happens as well as recording the sent mails at iCloud.
On iPhone and iPad you just add iCloud and then turn off mail again. Now you set up a mail account using the other option.
1. IMAP Account Information - In here i put the information that i want my contacts to see
2. Incoming Mail Server - I put the iCloud information
3. Outgoing Mail Server - I put the Gmail server
So in short now, i get complete syncing of my mails across my 3 iDevices and have the extra back up of iCloud, but my clients do not see my @me.com (iCloud) email address, they see my Gmail address that I have been using for many years so there is no confusion for them.
I really hope you get all of that, this is the first time I have helped on here so am very much a newbie but it seems to be working for me.
James
MBP - 2009
iPhone 4 - 2010
iPad 2 - 2011

New to FiOS, can I use my own modem and router

I saw several questions similar to mine, but none that I saw answered my question for my scenario. I am sorry if this is a duplicate. I am new to FiOS. I have no other services from Verizon and do not plan to get any. No phone, no television, nothing. Just Internet. God willing, the installation will take place in two days. My house already has coaxial cabling. I have my own cable modem, a SURFboard SB6121, which goes to my router, a TP Link TL-WR941ND. None of my equipment advertises that it is FiOS compatible. I've seen other people asking about using their own modem and router, but in those cases the scenario involved other bundled services, and I understand a FiOS router is necessary to forward ports to television, phone, and computers. However, in my very simple scenario, can the Verizon optical network terminal simply feed its output to my coax, from there to my modem, then router, then comptuers? Is there any reason that wouldn't work? Verizon technical support just gave me a machine that wanted to help me troubleshoot my Internet connection, and I couldn't get from there to a human. Thanks in advance for the help!

Banish the word and the device called "modem" from your home when using FiOS. FiOS does not use modems. Your cable modem is useless with FiOS. Do not plug it in. FiOS uses routers. The router connects to the ONT's WAN port using MoCA (coax) or Ethernet. The installer will enable one of the ONT's WAN ports. If you order 150Mbps or higher speeds, they will have to use Ethernet. For slower speeds, coax is the default. Many installers will use Ethernet if you ask nicely, but usually only if it isn't too much work. Make sure it's easy to connect a router to the ONT using Ethernet, and you should be okay. If Ethernet needs to be run through the walls, your best choice is get it done ahead of time. You can always call later and get the ONT's WAN port switched. The only routers available with a MoCA WAN port are the Verizon models. The Verizon routers are good devices for most users. People who like to tweak their networking gear don't like them as many advanced features are limited or locked down. You can't run any other router firmware on them. WiFi range is decent, but not great. I'm quite happy with my Quantum router. YMMV. If you get Ethernet WAN enabled, you can use any router you want. However, know that Verizon provides zero support for any other router. They won't even mention it as an option. That doesn't mean you can't use one, simply that you must do so without Verizon's help. There are reports that they won't even complete an install without one of their routers to verify service. If you don't use one of their routers, consider renting one for a month to complete the install or even buying a used one. If you own a Verizon router, you can install it if you ever suspect Verizon networking issues. This will allow you to call their support. This FAQ is very helpful:http://www.dslreports.com/faq/16077 Good Luck.

HT1695 I know nothing about how to use my new ipod and when reading the little bit of information in the folder that came with it, all I can do is turn it on, but it just powers down after a few seconds. How do I work this thing?

I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on. Then in a few seconds it goes black, never having brought up a screen to do anything! Help! What do I do to get this thing going?

You might consider connecting it to the charger and charging up the battery overnight.
Please Get the iPod Touch User Manual for iOS 5

How to use external hard drive and iTunes together?

how to use external hard drive and iTunes together?

Yes I did get to that part.... I went trough external to retrive itunes folder... When I selected the folder, it said that it was locked, choose another folder... I then went to my external again to my itunes folder and and used command I to see if folder was locked and it wasn't.... it was suggested on another forum to reboot.. which I did and still same problem... All I want to do is link my external hard drive that has my itunes playlist from another Mac to my new one.. and to also use the external as the main source for adding new songs to my playlist...

How to use my own domain and integrate to my Muse Website

Similar Messages

Maybe you are looking for