How to use PGRFlyCapture in Ubuntu

hi, i am using javacv in my ubuntu, i have motion detection code that completely works on usb webcam but it's not working on flycap. can anyone tell me how to use PGRFlyCapture in Ubuntu?

Found the solution. The detailed answer can be found here:
java - How to install SIGAR on Ubuntu-based Linux? - Stack Overflow

Similar Messages

How to use SIGAR in Ubuntu-based Linux?

I am using SIGAR in a project with Maven and Spring. I have the Maven Dependencie and Maven Repository included in my pom.xml file, as described in this link:
http://mavenhub.com/mvn/thirdparty-uploads/org.hyperic/sigar/1.6.5.132
However, SIGAR still won't work. Aparently I also need to install libsigar-amd64-linux-1.6.4.
So I downloaded that file, but now I have no idea what to do with it. How do I fix this? Where do I put that file?

Found the solution. The detailed answer can be found here:
java - How to install SIGAR on Ubuntu-based Linux? - Stack Overflow

How to use DVB on ArchLinux (with an em28xx chip)?

Hi there,
I'm trying to figure out how to use my Terratec Cinergy Hybrid T USB XS on ArchLinux. It should use the em2880 chip.
I think that the correct kernel modules are already bundled with the latest kernel version:
bash-3.2# lsmod | grep 'em28'
em28xx_dvb 10500 0
dvb_core 86956 1 em28xx_dvb
em28xx_alsa 11400 0
em28xx 71852 2 em28xx_dvb,em28xx_alsa
compat_ioctl32 11520 1 em28xx
videodev 38784 3 tuner,em28xx,compat_ioctl32
videobuf_vmalloc 9476 1 em28xx
videobuf_core 20484 2 em28xx,videobuf_vmalloc
ir_common 39428 1 em28xx
tveeprom 16900 1 em28xx
i2c_core 25760 8 tuner_xc2028,tuner,v4l2_common,tvp5150,em28xx,nvidia,tveeprom,i2c_nforce2
snd_pcm 82440 4 em28xx_alsa,snd_pcsp,snd_hda_intel,snd_pcm_oss
snd 64840 13 em28xx_alsa,snd_pcsp,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
usbcore 156816 8 em28xx_dvb,em28xx_alsa,em28xx,usbhid,isp1760,ehci_hcd,ohci_hcd
This is the dmesg after plugging the USB device:
usb 2-4: new high speed USB device using ehci_hcd and address 5
usb 2-4: configuration #1 chosen from 1 choice
em28xx new video device (0ccd:005e): interface 0, class 255
em28xx Doesn't have usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: chip ID is em2882/em2883
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de 1c
em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 00
em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 00
em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 00
em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 03
em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 00
em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 00
em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 00
em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c 03
em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 00
em28xx #0: i2c eeprom f0: 38 00 30 00 38 00 33 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a, hash = 0x4c13bfbe
Vendor/Product ID= 0ccd:005e
AC97 audio (5 sample rates)
500mA max power
Table at 0x27, strings=0x409e, 0x1cde, 0x346a
em28xx #0:
em28xx #0: The support for this board weren't valid yet.
em28xx #0: Please send a report of having this working
em28xx #0: not to V4L mailing list (and/or to other addresses)
xc2028 2-0061: creating new instance
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
firmware: requesting xc3028-v27.fw
xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
xc2028 2-0061: i2c input error: rc = -19 (should be 2)
xc2028 2-0061: Unable to read tuner registers.
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000), id 0000000000008000.
xc2028 2-0061: i2c input error: rc = -19 (should be 2)
xc2028 2-0061: Unable to read tuner registers.
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 2-005c: *** unknown tvp8081 chip detected.
tvp5150 2-005c: *** Rom ver is 130.131
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
tvp5150 debug 2-005c: i2c i/o error: rc == -19 (should be 1)
em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Terratec Hybrid XS (em2882)
tvp5150 2-005c: tvp5150am1 detected.
So it seems that the device has been recognized.. I downloaded the firmwares from http://konstantin.filtschew.de/v4l-firmware/ (the v2, since it is the 0ccd:005e version). I've also extracted the xc3028-v27.fw from the windows drivers using extract_xc3028.pl, since dmesg was complaining for the missing file.
However, Kaffeine doesn't recognize the DVB device, and I can't get any other player to work with it.
Is the kernel-bundled em28xx module broken for this device? I remember that I could make this USB dongle work some months ago in an Ubuntu setup, compiling the v4l from sources - do you think that this is required? I see many people can't compile it with the latest kernels.. and don't know exactly where to start.
Any help would be very appreciated.. thank you
Cosma

Anybody can explain me what's the difference between /dev/video* and /dev/adapter*/* ?
I tried to cat my /dev/video1 (sometimes, plugging out and in the adapter, it gets assigned to video1) and some weird stuff is actually received so I decided to try a frequency scan.. I prepared the frequency file for my local muxes, installed the linuxtv-dvb-apps package, and tried to scan:
bash-3.2# scan ./it-Roma
scanning ./it-Roma
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
(also triend to play with the -f, -d and -a options to switch on adapter1, demux1 and frontend1)
Now, those devices was not created at all in my system.. isn't v4l supposed to create them, once recognized the dvb device?

How to use remote desktop client in mountain lion

How to use remote desktop client in mountain lion.
I want to connect my other system(ubuntu) using mac remote desktop client, But i could not locate remote desktop client in moutain lion.

In Ubuntu 12.xx use Dash to find "Desktop Sharing" and set the preferences, including requiring a password.
Then in Ubu use System Settings > Network to determine your Ubu machine's IP address, such as 192.168.1.13.
On the Mountain Lion Mac do Finder > Go > Connect to Server and enter: vnc://192.168.1.13 or whatever your IP is. Enter the password that you used in the Ubu Desktop Sharing setup, when asked.
On the Ubu machine answer the question that pops up asking for permission to connect. Your Ubu screen will now show up on the Mac, and you can remote control it. Here I am running "Octave" (a math program) on the Ubu machine, remotely.
Works great! BTW, you can do this from an iPad too, using a VNC client such as Mocha VNC Lite. You can even run both remotes simultaneously.
Good luck.

How can use linux in my macbook?

how can use linux in my macbook?

You can use various distributions of Linux either by running them under Boot Camp, or in a virtualized environment such as Parallels or VMWare's Fusion. Note that you may have to try several different distros until you find one that works. I settled on Ubuntu running under Parallels.
Best of luck.

How to use Google Fonts in email?

Hi,
I would like to know how I use google fonts in my emails.
We're using the ubuntu font and I see the fonts on my computer but after sending an email the fonts change.
I'm using the addon SmartTemplate4.
Hope any f you know the answer!
Thanks in advance

Several online resources point to these two articles at Campaign Monitor:
* [https://www.campaignmonitor.com/blog/post/3897/using-web-fonts-in-email Using web fonts in email] (Dec. 2012)
* [https://www.campaignmonitor.com/resources/will-it-work/webfonts/ Web Fonts] (permanent resource)
The first link provides examples on how to do this, while the second one has informaiton about email client support & compatibility with this feature.
Keep in mind using web fonts will have a limited effect if viewing such emails while offline.
[http://kb.mozillazine.org/Default_HTML_font_for_new_messages_-_Thunderbird This older MozillaZine article] also has information about fonts use in Thunderbird. In my experience in most cases the receiving party will have to have the fonts locally installed for the best results.

How to use networkmanager-applet to creat wireless internet sharing?

hi,
I'm trying to creat a wireless connection to share internet with another laptop.
I followed the usual step like how i did it on Ubuntu
Creat New Wireless Connection-->
then I setup a connection
Mode: Ad-hoc (No security password, cuz it's for testing)
ipv4 settings: Method: shared to other computers
when I tried to connect to this connection, it does work for only a second. the notify-osd says connection established, then changed into disconnected right after. and the connection does was detected on the other laptop (with vista), but only last about a second.
I have no idea what happed. but it works perfectly on Ubuntu, with the same operations.
also, if I create a connection on vista, it can connect to that connection.
what should I do to make it works as well as how it does in unbuntu?
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Asia/Shanghai"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(acpi_cpufreq cpufreq_ondemand cpufreq_powersave usblp usbcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="kwan-laptop"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo !eth0 !ath0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng hal fam cpufreq @laptop-mode ufw networkmanager dnsmasq netfs cups crond avahi-daemon !network !lastfmsubmitd !lastmp alsa gdm)
[kwan@kwan-laptop ~]$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:13:A9:50:3D:2B
inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::213:a9ff:fe50:3d2b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1628 errors:0 dropped:0 overruns:0 frame:0
TX packets:1788 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1061372 (1.0 Mb) TX bytes:276083 (269.6 Kb)
Interrupt:16
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:694 errors:0 dropped:0 overruns:0 frame:0
TX packets:694 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:34780 (33.9 Kb) TX bytes:34780 (33.9 Kb)
wlan0 Link encap:Ethernet HWaddr 00:19:7D:C0:F8:5A
inet6 addr: fe80::219:7dff:fec0:f85a/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:90 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:20024 (19.5 Kb)
wmaster0 Link encap:UNSPEC HWaddr 00-19-7D-C0-F8-5A-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:0 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)

I can't get this to work either. I've tried everything I can think of.
Relevant configuration file:
# DHCP configuration generated by Firestarter
ddns-update-style interim;
ignore client-updates;
subnet 192.168.1.0 netmask 255.255.255.0 {
option routers 192.168.1.1;
option subnet-mask 255.255.255.0;
option domain-name-servers 128.253.180.2, 132.236.58.250;
option ip-forwarding off;
range dynamic-bootp 192.168.1.100 192.168.1.110;
default-lease-time 21600;
max-lease-time 43200;
dnsmasq is installed and running.
created ad-hoc network in nm-applet, tried all sorts of different configs in there to no avail.
Has anyone gotten this working in Arch?

How to use Synclast MIDP in netbeans

Hi i have downloaded the Synclast MIDP UI from http://sourceforge.net/project/showfiles.php?group_id=83391 but i am having trouble finding a way to use it in my j2me project netbeans
does anybody know how to use these UI has i want to customize a forms appearance, eg set the form to appear in full screen, add colour, change fonts etc...
i was looking at using j2me polish but i cant get it to work with netbeans 5.5

Bob_Unitt wrote:
Yucca wrote:
Well once again these commands will verify your installatiion as follows...bobunitt@****:~$ java -versionjava version "1.6.0_0"
OpenJDK Runtime Environment (IcedTea6 1.4.1) (6b14-1.4.1-0ubuntu7)
OpenJDK Client VM (build 14.0-b08, mixed mode, sharing)
bobunitt@****:~$ javac -version
javac 1.6.0_0
Note that this was installed with Synaptic Package Manager, and should therefore be the 'correct' version for Ubuntu 9.04.
I've now tried installing the package 'javahelp2-doc' as well, but that hasn't made any difference.
I use ubuntu same as you.. I had issues with the JDK and JRE and found that one needed to uninstall the iced tea JDK and co. to be able to install the proper JRE and JDK The version you are using does not provide the "nimbus" look and feel which is not an issue but was for me.

How to use rescuecd to access NAS200 RAID drives

I have been lurking trying to figure out how to access my NAS200 drives after a power supply failure and of course I have no backups, relying on the RAID to create my two copies. (Lesson learned)
I have a NAS200, with two Western Digital 1TB Green hard drives. They are configured in a RAID 1 mirror and they are in a journaled file system
So from what I've been reading, I believe they are in XFS. and I can use the rescuecd iso to access the drive directly to copy them off onto another drive.
I am using Windows XP SP3. The computer system is 8 years old - a Dell Pentium 4 Dimension system with 4GB of memory. I do have Ubuntu, but I have no idea how to use Linux, and definitely not the command line that the rescuesystemcd drops me into.
I've taken one of the drives and installed it in an external USB drive and plugged it in the system.
In Windows XP SP3, I can see the drive on my virtual file manager and I can see the three partitions, one main data partition, the configuration partition and the swap partition, but of course it's not the right file system. and it's not ext2/ext3 so Ext2IFS will not work for me from what I've read.
In ubuntu 11.10, when I've plugged in the external drive, I have no idea how to access the drive. I suspect I have to mount it, but I have no idea how to do it or even where to begin looking for it to access it.
And of course in the CLI using the systemrescuecd, I am completely lost there: The last CLI I used was MS-DOS from over 15-18 years ago. I can ls (MS-DOS dir) and cd to navigate the folders of the file system and I believe cp is copy? and if I was using the Ubuntu CLI, I have to sudo everything I believe.
So after this long post, what am I asking for?
- How do I mount the external drive in either Ubuntu or the system rescue CD iso.
- Can I mount a second external drive with a NTFS file system in Ubuntu or the system rescue CD?
- I would prefer to do it in Ubuntu or some other graphical method so that I could just drag and drop from one disk onto another or failing that using the commandline, what command would copy the entire drive's file system from one to another?
Thanx

Are you able to access the web interface of NAS200 using its IP address? If, 'yes' then unplug both the hard drives? Reset NAS200, reconfigure it and connect the drives again. See if that helps.

How to use one email adress for multiple recipients

Hello,
I'd like to know how to use one email adress for multiple recipients.
this would be very useful or projects. for example;
if i send one mail to [email protected], all people in this project get an email.
I will add the people in this project myself.
I know it is possible, but I don't know how to do it ;-)
please help me!

Hope this help.
_http://technet.microsoft.com/en-us/library/cc164331(v=exchg.65) .aspx

Can't figure out how to use home sharing

Since the latest couple iTunes updates, my family and I can not figure out how to use home sharing. Everyone in our household has their own iTunes, and for a long time we would just share our music through home sharing. But with the updates, so much has changed that we can no longer figure out how to use it.
I have a lot of purchased albums on another laptop in the house, that im trying to move it all over to my own iTunes, and I have spent a long time searching the internet, and everything. And I just can't figure out how to do it. So.... how does it work now? I would really like to get these albums from my moms iTunes, onto mine. I would hate to have to buy them all over again.
If anyone is able to help me out here, that would be great! Thanks!

The problem im having is that after I am in another library through home sharing, I can't figure out how to select an album and import it to my library. They used to have it set up so that you just highlight all of the songs you want, and then all you had to do was click import. Now I don't even see an import button, or anything else like it. So im lost... I don't know if it's something im doing wrong, or if our home sharing system just isn't working properly.
Thanks for the help.

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

How to use airport time capsule with multiple computers?

I'm sure there are some thread about this but i couldn't find it... so sorry for that but hear me out! =)
I bought the AirPort Time Capsule to back up my MBP
And so i did.
then i thought "let give this one a fresh start" so i erased all of it with the disk utility and re-installed the MBP from the recovery disk.
I dont want all of the stuff i backed up just a few files and some pictures so i brought that back.. so far so good.
Now i want to do a new back up of my MBP so i open time machine settings, pick the drive on the time capsule and then "Choose" i wait for the beck up to begin, and then it fails. It says (sorry for my bad english, im swedish haha) "the mount /Volume/Data-1/StiflersMBP.sparsebundle is already in use for back up.
this is what i want:
i want the "StiflersMBP.sparsebundle" to just be so i can get some stuf when i need them. it's never to be erased.
i want to make a new back up of my MBP as if it's a second computer...
so guys and girls, what is the easiest and best solution?
Best regards!

TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html

How to use multiple ipods on one account

I have an Ipod classic and just bought my sons two nano's how do I use these on the same account without changing my account info?

Take a look here:
How to use multiple iPods with one computer
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

How to use a Table View in AppleScriptObjC

How can I use a table view and add data to it? And how can I display a button cell and image cell in the table? Thanks.

Hi all,
Actually i need some more clarification. How to use the same select statement, if i've to use the tabname in the where clause too?
for ex : select * from (tab_name) where....?
Can we do inner join on such select statements? If so how?
Thanks & Regards,
Mallik.

How to use PGRFlyCapture in Ubuntu

Similar Messages

Maybe you are looking for