How to use program RFBISA00?

Dear all,
We want to update our account descriptions in several languages.
In order to do this we need process in mass using RFBISA00 which is standard.
But I do not understand how to use it because we only have for only one structure BSKX. This structure does not have a field named Language....
A LSMW with transaction FST2 could be interesting but we would have to a dynamic LSMW because we do not have same number of languages for all account...
Thanks for your help.
David

I found something which is not very good but useful.
I change LSMW Method from 2 to 1 which I find more friendly to use.
Then I have following structures:
- BGR00
- BSK00
- BSKAT
I have done all mapping fields:
- BSK00-TCODE : FS02
- BSK00-SAKNR: FILE-SAKNR
- BSK00-BUKRS: FILE-BUKRS
- BSKAT-TXT20 : FILE-TXT20
- BSKAT-TXT50 : FILE-TXT50.
Conversion is ok.
Create batch input session : no error.
Run batch input : Nothing..... No batch input in SM35.
No modification has been done.
Why???

Similar Messages

Does anyone know if apple's one-to-one program would be a good way to learn how to use logic pro or am I better off going to school to learn audio engineering or something?

Of course going to school would be a good option, but I want to know if one-to-one is also a good way to learn how to use logic pro. Has anyone been through the one-to-one program for logic pro and can say that they learned how to use logic pro well because of it?

For sure, one to one training, if given by a tutor who is capable, will hand you the means to build up self-confidence and will therefore let you operate the hard/software in an intelligent manner, instead of going for the trial and error method which has its pro's and con's too. Once you've passed this beginners phase you will make your own decisions intelligently and then you will also start to get experience and learn even from your mistakes. Something like that in theory and the rest is up to you!
Have a nice day

The "recently used programs" section on the start menu has disappeared - how do I get it back?

On the start menu, the top few programs are those that I use frequently. There used to be a line, and underneath the line appeared the programs that I have most recently used (other than the frequently-used programs above the line). This bottom section has disappeared - how can I get it back? Running XP with Firefox 33.1.

This is a Windows question, not a Firefox question. Try using a search like www.bing.com/search?q=restore+recently+used+programs+windows+xp for help.

How to use dynamic selection screen inputs in main program

hi all,
its a report where in it calls one dynamic selection screen( user need to enter the parameters here) after that i need to use those inputs for some check, can any buddy help how to use/ get that input parameters into main program.
regards,
vara..

Hi,
i think u have created that dynamic selection screen in seperate program and calling to ur main program.instead of that u just create that synamic selection screen program as include program and include it in ur main program.
or u need to use set/get parameter id concept.
rgds,
bharat.

How I use 2 AI with 1 AO in the same program without hardware errors?

I have a machine with a Motor (velocity controled with PWM), a Strain Gauge, and a Encoder (inner the motor). This machine is controled with a LabVIEW 6.1 program in a computer with Intel Celeron 1.5Gb 360 Mb RAM and DAQ 6024E.
In my program I have two AI Adquisition Waveform blocks with AI different ranged Channel (the firts in my Strain Gauge ranged -9 to +9 V) and the second in my encoder ranged 0 to +5 V), and one AO Generate Waveform (the PWM signal ranged 0 to +5 V). When I put on the program, the motor Glitches an my computer turns slow. It´s cause me problems!
Whats the problem?

You would probably get more info on this in the DAQ Discussion Forums, but I can help you out a bit here. The VIs that you are using are very high level VIs so there is a lot going on behind the scenes that you do not see. More importantly, they are synchronous, meaning that you have to wait until they're finished to do anything else. This is probably why your computer is slowing down. The UI may even freeze until you have acquired all the points you requested. I would suggest using the more advanced DAQ VIs to control your system. There are many examples that ship with LabVIEW which demonstrate how to use these. They allow you to build an asynchronous acquisition system so that other tasks may operate while the DAQ board is acquiring data.
J.R. Allen

How to use where clause with get statement in LDB programs

Hi All,
I am using logical databse in my report program.I am not getting how to use the where clause in the get statement is it possible to use?or if not possible only option is we should filter it after get statment is right?Can you please some body throw some idea on this?
Regards
Mahesh

Hi,
Reffer these links
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
reward if helpful
Thanks,
Suma.

How to use (to program) a Scheme in Xcode? (novice programer needs help!)

How to use (to program) a Scheme in Xcode?
i have been using Aquaemacs (GNU emacs) with Guile extensions. but i really would like to do all that in Xcode. is it possible? thanks.

I believe that Scheme is not a language natively supported by Xcode. Maybe there is a way to write a plugin for it, but I don't really think so and in particular I haven't seen one for LISP or Scheme.

How to use the created search helps in the program?

Hi Everyone,
I know how to create Search help elementary / collective search help through SE 11. I have a question, how can I make use of the created search help in the program.
How to use the Search help in the programs, which is created through SE11
Subbu.

Hi,
In case if you want to use in parameters statement, then we can use the suffix MATCHCODE OBJECT syntax.
Eg.
report abc.
parameters : a(10) type c matchcode object ZBELNR.
Hope this helps.
regards,
amit m.

How to use ranges in the program

hi all,
my requirement is i need to create a range for srat date so iam creating a structure say name of the range table is zstartdate. how to use this table in my program.
selct * from zuser_Secobjects where start_date in zstartdate. is it ok ?
thanks
maheedhar.t

hi maheedhar,
I am sending u the sample program and the docs also.
Program:
 T A B L E D E C L E R A T I O N *
**-- Tables used
**-- VBAK. "Sales Document: Header Data
 T Y P E D E C L E R A T I O N *
**-- Type for VBAK
TYPES: BEGIN OF T_VBAK,
 VBELN LIKE VBAK-VBELN,
 ERDAT LIKE VBAK-ERDAT,
 AUART LIKE VBAK-AUART,
 END OF T_VBAK.
 I N T E R N A L T A B L E D E C L E R A T I O N *
**-- Internal table to store header data
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK WITH HEADER LINE.
**-- Ranges for Inquiry/Quotation
RANGES R_AUART FOR VBAK-AUART.
 C O N S T A N T S D E C L E R A T I O N *
**-- Constant to store value of Inquiry (IN) / Quotation (QT).
CONSTANTS: C_IN LIKE VBAK-AUART VALUE 'AF',
 C_QT LIKE VBAK-AUART VALUE 'AG',
 C_EQ(4) TYPE C VALUE 'EQ',
 C_I(2) TYPE C VALUE 'I'.
 I N I T I A L I Z A T I O N *
**-- Clear the internal tables and flag.
CLEAR: IT_VBAK,
 R_AUART.
**-- Refresh the internal tables.
REFRESH: IT_VBAK,
 R_AUART.
**-- Initialization of ranges
R_AUART-SIGN = C_I.
R_AUART-OPTION = C_EQ.
R_AUART-LOW = C_IN.
APPEND R_AUART.
CLEAR R_AUART.
R_AUART-SIGN = C_I.
R_AUART-OPTION = C_EQ.
R_AUART-LOW = C_QT.
APPEND R_AUART.
CLEAR R_AUART.
 S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK CHARLY WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR IT_VBAK-VBELN OBLIGATORY.
SELECT-OPTIONS: S_ERDAT FOR IT_VBAK-ERDAT.
SELECTION-SCREEN END OF BLOCK CHARLY.
A T S E L E C T I O N S C R E E N ( V A L I D A T I O N S ) *
AT SELECTION-SCREEN.
**-- Check the sales order number exists in the database table or not
SELECT SINGLE VBELN
 FROM VBAK
 INTO IT_VBAK
 WHERE VBELN IN S_VBELN
 AND ERDAT IN S_ERDAT
 AND AUART IN R_AUART.
**-- If no single data selected display error message.
IF SY-SUBRC <> 0.
 MESSAGE E000.
ENDIF.
 S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
**-- To fetch data from database table (VBAK)
**-- Store the data into the internal tabe (IT_VBAK)
PERFORM ZF_GETDATA.
 E N D O F S E L E C T I O N *
END-OF-SELECTION.
**-- To display sales order.
PERFORM ZF_CHECK_DISPLAY.
 T O P O F P A G E *
TOP-OF-PAGE.
**-- Page header
PERFORM ZF_TOP_OF_PAGE.
 E N D O F P A G E *
END-OF-PAGE.
**-- Page footer
PERFORM ZF_END_OF_PAGE.
*& Form ZF_GETDATA
 text
--> p1 text
<-- p2 text
FORM ZF_GETDATA .
SELECT VBELN
 ERDAT
 AUART
 INTO TABLE IT_VBAK
 FROM VBAK
 WHERE VBELN IN S_VBELN
 AND ERDAT IN S_ERDAT
 AND AUART IN R_AUART.
IF SY-SUBRC <> 0.
 MESSAGE S001 WITH IT_VBAK-VBELN.
ELSE.
 SORT IT_VBAK.
ENDIF.
ENDFORM. " ZF_GETDATA
*& Form ZF_CHECK_DISPLAY
 text
--> p1 text
<-- p2 text
FORM ZF_CHECK_DISPLAY .
CLEAR: IT_VBAK.
 LOOP AT IT_VBAK.
IF IT_VBAK-AUART = C_IN.
 ULINE.
 WRITE:/1 SY-VLINE, 10 TEXT-006 INVERSE COLOR COL_HEADING,
 50 TEXT-007 INVERSE COLOR COL_HEADING,
 143 SY-VLINE.
 WRITE:/1 SY-VLINE,12 IT_VBAK-VBELN INVERSE COLOR COL_NORMAL,
 52 IT_VBAK-ERDAT INVERSE COLOR COL_NORMAL,
 143 SY-VLINE.
ENDIF.
IF IT_VBAK-AUART = C_QT.
 ULINE.
 WRITE:/1 SY-VLINE, 10 TEXT-008 INVERSE COLOR COL_HEADING,
 50 TEXT-007 INVERSE COLOR COL_HEADING,
 143 SY-VLINE.
 WRITE:/1 SY-VLINE,12 IT_VBAK-VBELN INVERSE COLOR COL_NORMAL,
 52 IT_VBAK-ERDAT INVERSE COLOR COL_NORMAL,
 143 SY-VLINE.
ULINE.
ENDIF.
 ENDLOOP.
ENDFORM. " ZF_CHECK_DISPLAY
*& Form ZF_TOP_OF_PAGE
Header of the page gets displayed as soon as a new page is generated
FORM ZF_TOP_OF_PAGE .
ULINE.
WRITE:/1 SY-VLINE, 5 TEXT-002 INVERSE COLOR 7,143 SY-VLINE.
WRITE:/1 SY-VLINE, 143 SY-VLINE .
WRITE:/1 SY-VLINE, 30 TEXT-003 INVERSE COLOR 7,143 SY-VLINE.
WRITE:100 TEXT-004 INVERSE COLOR 7,120 SY-DATUM INVERSE COLOR 7,
143 SY-VLINE.
WRITE:/1 SY-VLINE,100 TEXT-005 INVERSE COLOR 7,
120 SY-PAGNO INVERSE COLOR 7,143 SY-VLINE.
ULINE.
ENDFORM. " ZF_TOP_OF_PAGE
*& Form ZF_END_OF_PAGE
Footer text displayed in each page
FORM ZF_END_OF_PAGE .
WRITE:/60 TEXT-008.
Docs:
 Ranges
A selection table is linked to the column of a database table, or to an internal field in the program. A selection table is an internal table object of the standard table type that has a standard key and a header line.
In addition to selection tables that we create using SELECT-OPTIONS, we can use the RANGES statement to create internal tables that have the structure of selection tables. You can use these tables with certain restrictions the same way you use actual selection tables.
A ranges table type is a special case of a table type. A ranges table type describes the structure of an internal table for administrating complex areas, i.e. the type of an internal table ranges table in the ABAP program.
The row type of a ranges table type has a fixed structure. The row type consists of 4 components SIGN (sign), OPTION (comparison operator), LOW (lower limit) and HIGH (upper limit) in this order.
1. SIGN The database type of SIGN is C with length 1. The contents of SIGN determine for each row whether the result of the row condition is to be included in or excluded from the resulting set of all rows. Possible values are I (inclusion criterion operators are not inverted) and E (exclusion criterion operators are inverted).
2. OPTION The database type OPTION is C with length 2. It contains the selection operator. The following operators are available:-
- If HIGH is empty, we can use EQ, NE, GT, LE, LT, CP, and NP.
- CP and NP are only allowed if wildcards (*' or '+) are used in the input fields.
- If wildcards are entered on the selection screen, the system automatically uses the operator CP. The escape character is defined as #.
- If HIGH is filled, you can use BT (Between) and NB (Not Between). We cannot use wildcard characters.
3. LOW - The data type of LOW is the same as the column type of the database table, to which the selection criterion is linked.
If HIGH is empty, the contents of LOW define a single field comparison. In combination with the operator in OPTION, it specifies a condition for the database selection.
 If HIGH is filled, the contents of LOW and HIGH specify the upper and lower limits for a range. In combination with the operator in OPTION, the range specifies a condition for the database selection.
4. HIGH - The data type of HIGH is the same as the column type of the database table, to which the selection criterion is linked. The contents of HIGH specify the upper limit for a range selection.
If the selection table contains more than one row, the system applies the following rules when creating the complete selection criterion:
1. Form the union of sets defined on the rows that have SIGN field equal to I (inclusion).
2. Subtract the union of sets defined on the rows that have SIGN field equal to E (exclusion).
3. If the selection table consists only of rows in which the SIGN field equals E, the system selects all data outside the set specified in the rows.
RANGES tables
We can use the following variants of the TYPES and DATA statements to create internal tables of the same type as selection tables.
TYPES|DATA .
An elementary associated type defines the type of components LOW and HIGH. It can be defined by specifying a data element or by directly defining the data type, number of places and if necessary the number of decimal places.
A ranges table type always has Standard table access mode and a standard key that is non-unique.
I think this will help u .
Reward points if helpful.
Regards
Nilesh

How to use BOR in my program

Hi Exprets,
I want to use a BOR(INSTLN) to update data of an installation, but I do not know how to use a BOR in my program, how to declare it, how to use the methods of the BOR. I would be appreciated if some1 give me some sample code.
Points will be rewarded, Thx in advance.
Vincent

Hi,
Look this code, hopefully can help you:
Declaration:
INCLUDE <CNTN01>.
* BOR
SWC_CONTAINER CON.
DATA: REQ TYPE SWC_OBJECT.
Bor Initialization:
Bor Name: 'ZHRQ295O'.
WA_HEADER-DOCNO is key field for BOR 'ZHRQ295O'.
You have to see your BOR key fields.
*& Form INIT_OBJECT
FORM INIT_OBJECT.
SWC_CREATE_CONTAINER CON.
SWC_CREATE_OBJECT REQ 'ZHRQ295O' WA_HEADER-DOCNO.
ENDFORM. " INIT_OBJECT
Calling method in BOR:
Statement 'SWC_SET_ELEMENT' is for give BOR attributes value.
*& Form CALL_REQUEST
FORM CALL_REQUEST.
SWC_CLEAR_CONTAINER CON.
SWC_SET_ELEMENT CON 'DocStatus' WA_HEADER-DOCSTATUS.
SWC_CALL_METHOD REQ 'Post' CON.
ENDFORM. " CALL_REQUEST
Clear/Delete BOR:
*& Form RELEASE_OBJECT
FORM RELEASE_OBJECT .
SWC_RELEASE_CONTAINER CON.
SWC_FREE_OBJECT REQ.
ENDFORM. " RELEASE_OBJECT
Regards,

How to use shell program parameters in java program??

Hai all,
I am writing a java program which must read strings from a file and must assign to variables.these strings are nothing but the output of ls -l command in shell. i need to have all those 9 fields in a file as variables.
I cant find any method that will read only string.I came accross read line but that is not what i need.So, i thought of writing a shell script and by using awk, storing those 9 fields in 9 variables.. but how to use that variables in java programming???
the shell script is executed by exec() but i need that variables also.
Help me please:(
thanks in advance

i now changed the code... and closed the output file and then i read.Later i splited with the line i read.. but the same happened...
this is the code:
while ((l = inputStream.readLine()) != null)
                    op=new FileOutputStream("op.txt");//output of exec goes to this file
                    String[] cmd= {"/bin/sh","-c","ls -l "+l};
                    rt = Runtime.getRuntime();
                    proc = rt.exec(cmd);
                    // any error message?
                      StreamGobbler errorGobbler = new
                      StreamGobbler(proc.getErrorStream(), "ERR");
                    // any output?
                      StreamGobbler outputGobbler = new StreamGobbler(proc.getInputStream(), "",op);
                    errorGobbler.start();
                           outputGobbler.start();
                    op.close();//the file is closed now
                    ip = new BufferedReader(new FileReader("op.txt"));     //now i opened to read
                    p=ip.readLine();
                    a=p.split("\\s");
                    ip.close();
               }where i went wrong?

How to use macro's functionality in a programe...?

hi,
i am siva,
i am new to abap,
i am not having clarity on how to use macro in a programe,
please send me any source code of a programe which
contain functionality of macros..?
and explain functionality of macros...?
i any of u know answer..
please send me source code of a programe that use macros...?
reguars,
siva.

Hi,
Macros:
If you want to reuse the same set of statements more than once in a program, you can include
them in a macro. For example, this can be useful for long calculations or complex WRITE
statements. You can only use a macro within the program in which it is defined, and it can only
be called in lines of the program following its definition.
The following statement block defines a macro <macro>:
DEFINE <macro>.
<statements>
END-OF-DEFINITION.
You must specify complete statements between DEFINE and END-OF-DEFINITION. These
statements can contain up to nine placeholders (&1, &2, ..., &9). You must define the macro
before the point in the program at which you want to use it.
Macros do not belong to the definition part of the program. This means that the DEFINE...ENDOF-
DEFINITION block is not interpreted before the processing blocks in the program. At the
same time, however, macros are not operational statements that are executed within a
processing block at runtime. When the program is generated, macro definitions are not taken
into account at the point at which they are defined. For this reason, they do not appear in the
overview of the structure of ABAP programs [Page 44].
A macro definition inserts a form of shortcut at any point in a program and can be used at any
subsequent point in the program. As the programmer, you must ensure that the macro
definition occurs in the program before the macro itself is used. Particular care is required if you
use both macros and include programs, since not all include programs are included in the syntax
check (exception: TOP include).
To use a macro, use the following form:
<macro> [<p1> <p2> ... <p9>].
When the program is generated, the system replaces <macro> by the defined statements and
each placeholder &i by the parameter <pi>. You can use macros within macros. However, a
macro cannot call itself.
Ex:
DATA: RESULT TYPE I,
N1 TYPE I VALUE 5,
N2 TYPE I VALUE 6.
DEFINE OPERATION.
RESULT = &1 &2 &3.
OUTPUT &1 &2 &3 RESULT.
END-OF-DEFINITION.
DEFINE OUTPUT.
WRITE: / 'The result of &1 &2 &3 is', &4.
END-OF-DEFINITION.
OPERATION 4 + 3.
OPERATION 2 ** 7.
OPERATION N2 - N1.
The produces the following output:
The result of 4 + 3 is 7
The result of 2 ** 7 is 128
The result of N2 - N1 is 1
Here, two macros, OPERATION and OUTPUT, are defined. OUTPUT is nested in
OPERATION. OPERATION is called three times with different parameters. Note how
the placeholders &1, &2, ... are replaced in the macros.
Regards,
Bhaskar

How to use standard report program [RPR_ABAP_SOURCE_SCAN]

hi all,
how to use RPR_ABAP_SOURCE_SCAN report program for checking my program. when i run it its asking me the report name and i gav it but, its showing me the error message as 'ENTER SEARCH STRING' .
SO I NEED TO KNOW WHERE I DID WRONG.
thanks in advance,
suresh babu aluri.

hi suresh,
i hav tried that, its working
enter like this,
program name : zpy_text
under search criteria.
Find string : select
"******enter any string that is in that program, usually select will be there, then execute.
With Regards,
S.Barani

How to use RSAN_PROCESS_EXECUTE in abap program

Hi all,
Does someone know how to use RSAN_PROCESS_EXECUTE in a abap program to execute an analytical process created in the transaction RSANWB?
I create a variant 'ZPC_ALIM_DL' for RSAN_PROCESS_EXECUTE. I would like to execute this program with this variant in a background job, but it seems that the job executed but it does nothing.
See below a part of the code.
SUBMIT RSAN_PROCESS_EXECUTE
             WITH VARIANT = 'ZPC_ALIM_DL'
             USER SY-UNAME VIA JOB L_JOBNM1 NUMBER L_JOBCOUNT1
             AND RETURN.
Thanks in advance,
L.

Hi Ludovic,
          I am using RSAN_PROCESS_EXECUTE with a variant in process chain. simply include 'abap program' type in process chain mention RSAN_PROCESS_EXECUTE as the program name and mention the variant you created for your apd process and run. I have tested it in dev and it has worked for me. let me know if this helps!
Thanks
Suresh R Kovvuru

How to use a parameter of a report program from selection screen in a dialog program

how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog program

Hi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro

How to use program RFBISA00?

Similar Messages

Maybe you are looking for