How to use PXI-8532 in LabVIEW Development Environment?

Hi,
I want to know how to use PXI-8532 in LabVIEW Development Environment.
I'm using
1. Windows7 32bit
2. LabVIEW Pro 2012 SP1 32bit
3. NI-Industrial Communications for DeviceNet 2.3
4. PXIe-1062Q
5. PXIe-8135
6. PXI-8532 *2 (Names are "dnet0" and "dnet1".)
* Both PXI-8532 are installed in the same chassis (PXIe-1062Q).
I want to construct the system that "dnet0" sends data, and "dnet1" receives it. The data type I want to use is an array of bools.
I made VI (test.vi), but it does not work.
Could you tell me the reason why my VI doesn't work correctly.
Thank you so much for your help and time.
Best Regards,
volcanon2
Attachments:
test.vi ‏28 KB

activeX

Similar Messages

How do I determine if a VI is running in the runtime engine or LabView Development Environment?

Is there a function or VI that I can call that will tell me if the program is running in the LabVIEW Runtime Engine or if it is running in the LabVIEW developement Environment? I am using LabView 8.5.
I have a menu item, File/Exit, and I would like to call the Exit LabVIEW vi if running in the runtime engine when that item is selected. However, in development, I don't want to shut down LabVIEW when I select that menu item.
Maybe there is a more appropriate way to exit the program. However, I am looking for something elegant. I'm sure I could find some other way to accomplish the same thing, but I'm looking for a clean way to do it.
Thanks

Here is a small VI with this exact function.
Attachments:
Is EXE.vi ‏9 KB

How to use crystal reports in LabVIEW

Hi, Can anybody tell me how t use crystal reports in LabVIEW. If any material if you will be very helpful.
Regards,
Rajashekar

activeX

Using Acrobat SDK for Unix development environment

Hi,
Can it be possible for me to use Acrobat SDK for Unix development environment as a server application??If yes, what are the things that should be installed on the client side to make sure that the client should be able see the produced PDF files?? Kindly help me in this regard..
Deepak

lAnubisl wrote:
My customer's solution has several issues generating PDF files and we are looking at the Acrobat SDK as at the instance of the final truth.
I use Interop.Acrobat.dll as a .NET project reference to open and resave PDF documents. I'd like to do all things I mentioned above.
After years and years, I have concluded that if you do serious PDF development, you need a set of libraries. For instance, if you are doing typesetting type of work ("vertical center", "horizontal center", "margin", etc., etc) , there is an excellent library from a guy in Germany (land of Johannes Gutenberg and printing presses)...
... which turned out to be useless in my next project which dealt with AcroForms.
I know exactly what you mean by "the final truth", sometimes I wish Adobe had some sort of official validating tool (like XML does).
Per your comments, I would recommend you to consider this library. It is available in all languages and its output is the same quality as Adobe's or at least in the same league:
http://www.pdftron.com/pdfnet/index.html
If you want to comment further, we must go to a different forum, since we are not supposed to discuss any non-Adobe products here.

How to use PXI 6071E daq card to complete multichannels scan with high sampling speed

I used pxi 6071E daq card to acquire 115v 400hz AC signals.when I use mutichannel scan function,I find that the voltage of waveforms have much more error.The voltage error is about 0~15v.please you can tell me why this happened?how to solve it.
Attachments:
多通道监测4.vi ‏199 KB

Sunny;
As you are scanning multiple channels and the signal range is high, you can try to set the interchannel delay a little higher. The interchannel delay is the time which the multiplexer will take to switch to the next channel. If that time is to short, the instrumentation amplifier can have problems to settle, and then an error at the reading will happen.
You can change the Interchannel delay at the AI Config.vi.
Hope this helps.
Filipe

How to use wavelet analysis in labview 8

Dear everybody
how can i use wavelet analysis in labview 8
thanks in advance

Hey khairy,
There's quite a bit of information available at ni.com about wavelet analysis and how to perform this in LabVIEW. By just doing a quick search, I came up with the following links:
NI LabVIEW Advanced Signal Processing Toolkit:
http://sine.ni.com/nips/cds/view/p/lang/en/nid/1395
Advanced Signal Processing Toolkit Demo:
http://zone.ni.com/devzone/cda/epd/p/id/4765
KnowledgeBase Articles:
Custom Wavelet Analysis Using Signal Processing Toolkit in LabVIEW
http://digital.ni.com/public.nsf/allkb/11ABBF34A0D8E9BB86256E55005CA69D?OpenDocument
How Do I Use the Continuous Wavelet Transform to Produce a Scalogram?
http://digital.ni.com/public.nsf/allkb/79EABCEBCA56F65686256F340062C4D7?OpenDocument
Good Luck!!
Brian B
Field Sales Engineer
Tennessee/Southern Kentucky
National Instruments

How to use PXIe-5673e to continously generate dual-tone waveform?

Hi, everyone!
I want to use PXIe-5673e to continously generate dual-tone waveform, and I have see some examples of RFSG, but I still don't know which one to use, can someone help me?
Thank you very much!!

See if this example VI helps
Ches this one too

How to bring PCUI_GP DCs to local development environment

Hi,
I want to create a fresh FPM based application in local development environment.
For this I need to add the PCUI_GP DCs as used DCs.
Currently they are not available in local development environment but only in DTR Track...
How do i bring these DCs to local...?
Please advise(I do not mean just by creating project from inactive Dcs but to make the whole PCUI_GP DCs available in Local)
Thanks,
Rocky

Hi Rocky,
Have you deployed the PCUI_GP component separately, As it is required very much, You can find the same on service.sap.com/swdc.
Please deploy the same and the check out the results.
Best regards,
Deepak..

How to use Crossbow Xmesh WSN LabVIEW drivers for downstream communication with motes

Hello,
I am trying to use LabVIEW Crossbow Xmesh WSN driver for downstreaming commands but driver programs are not working.
I am interested in changing node (Iris mote with MDA300 board) update rate from LabVIEW program running on host PC .
I have used Set node update rate.vi with open stream.vi and start stream.vi in proper sequence and developed a program to change node update rate. When program is run no error is shown but node update rate is not changed.
Pl suggest what I should I do.
What is the function of WSN write VIs (WSN write Raw 1sensor1point). For what type of message this is used.
I want to actuate relay on MDA300 with mote id 2. What VIs (from driver ) I have to use and how to issue command related to it.
Incase any one can help I will be grateful
Roop

Hi Arjun,
I am sending you snap shot of VI developed to change node update rate.and also the heirarchy of drivers VIs used in the program for better understanding .
In case you can figure out why the command message send is unable to communicate with mote .
Also for downstream communication with motes the packet format used is described in Moteworks user manual from MiMSic.com
I think the developer of these drivers can help you out in solving my problem.
Thanks
Roop
Attachments:
sreenshot to arjun ni for checking downstream comm.doc ‏288 KB

How to use PXIe 5652 as external clock to the USRP

Hi,everyone,I'm new to PXI and USRP,and there are some problems I want to ask for help.
What I want to do is to synchronize 8 USRPs which are used as receivers. To make sure they have the same crystal oscillator, I want to use the PXIe 5652 as the external clock.However, what confuse me are that PXIe 5652 has 3 connector(RF out, REF in/out, REF out2), and USRP 2920 has REF in and PPS in, how to connect them? Wheather I need to connect the PPS in to achive my aim? And,if it is needed to write some labVIEW programs to make PXIe 5652 as the external clock? that's all,thank you!

Hi,
To provide a external reference frequency signal I think the following method can be used.
Use the niRFSG or niRFSA Export Signal VI to export the "Reference Clock" signal to "RefOut" or other appropriate output terminal.
Use the commit VI to commit these settings to the driver.
For ease you may use one of the existing RFSA or RFSG example VIs and add the export signal and commit VIs.
When the VI which opens a session to the RFSG or RFSA device is run the reference clock signal shall be exported to the configured terminal of the RFSA or RFSG device.
You may then connect this terminal to the Ref In terminal of your USRP device which you would have configured to use a external reference frequency source.
This method works for the VST which I use.
Thanks.

How to use USB interface with LabVIEW Embedded for ARM

Hi everybody.
I am developing an application based on the "LabVIEW Embedded for
ARM". Now I am doing various tests using
the evaluation board 2300 (with NXP LPC2378), but soon I will
dedicate to program the micro used in my project (NXP
LPC2148).
During the tests, I have seen that "default" LabVIEW interface allows the use
of CAN, I2C and SPI interfaces of the micro. I want to know how can I also use the
USB interface that is on the micros -both LPC2148 and LPC2378- (pin USB_D + / D-, USB_UP_LED,
USB_CONNECT, VBUS).
Thanks in advance for your suggestions

@chueco85
If you've created an application in LabVIEW for ARM and you build it.
you can go to tools >> ARM Module >> Show Keil uVision
then go to he build options.
the hex file will be created when you do a build.
with flash magic :http://www.flashmagictool.com/
you can program your device.
Wouter.
"LabVIEW for ARM guru and bug destroyer"

How to use wsit with jeveloper for developing and testing web servises

hi, all. Just want to ask one realy simple quastion.
I'm new with web servises, so my question may be doesn't fall well into this section , but this community looks friendly for me and i hope to get some usefull links and advises.
First of all could anybody say me if i'm righ or wrong with the following suggestions:
1. What is the principal difference between axis 2 and wsit products? Do i understand right that they both extend or support so called jax-ws2 API and represent different approaches in that (are they competitors?), or this products serve for different sakes at all and could be used together? I want to understand without much digging how these products correlate with each other...
2. If i'm right what is oracle favor? And if oas standard supply doesn't include wsit, how to install and use this product for creating interoperable web servises in jdeveloper enviroment? ...or jax-ws 2.1 wasn't included in oc4j v10 and will be the part of v11 only?
Thanks in advance. Alex.
Message was edited by:
Timin
Message was edited by:
Timin

Both Axis and WSIT are not Oracle products - so I'm not exactly sure why would you post the question here.
JDeveloper has native support for JAX-RPC based Web services development in 10.1.3 and JAX-WS support in 11 - check out the online demos linked from the home page to see these in action.

How to use matlab function with labview?

Hello,
I just want to use some matlab functions like floor(),ones()... in my labview code, who can tell me how to do it?
I want to only install MCR in my PC, so MATLAB script node can not work because it need matlab installed.
Thanks
Solved!
Go to Solution.

floor() exists on the standard labview pallet already and the ones() function would be fairly simple to reproduce. If you only need a few basic functions repost asking for direction on recreating those specific methods. However, you're right - there is not a direct way to use compiled matlab code in labview without full matlab and the math script nodes. If you're really desparate to reuse some some exisiting IP there are C++ alternatives that implement many of the same methods and syntax as matlab (http://arma.sourceforge.net/faq.html). I'm fairly sure there are other tools that attempt to translate matlab code into pure c functions, both of which can be called via a DLL from within labview: https://decibel.ni.com/content/docs/DOC-9076
Alternatively, here is an all NI linear algebra solution: http://sine.ni.com/nips/cds/view/p/lang/en/nid/210525

How to use PXI Star Trigger for PXIe-5663 in PXIe-1075 chassis

HI all,
I have this sytem configuration:
PXIe-8135 controller. Windows 7 64-bit, RFSA 2.7.5. NI-SYNC 3.4.1
PXIe-1075 chassis
PXIe-5663 (2x)
PXIe-6672 Timing & Sync Card (slot #10)
I want to trigger the recording of my Digitizer with an external trigger.
The External Trigger is connected to PFI0 of the PXIe-6672 Timing card.
Then, the PXIE-6672 card routes the trigger to the backplane of the PXIe-1072 (Destination "NISYNC_VAL_PXITRIG0")
The PXIe-5663 are triggered with “NIRFSA_VAL_PXI_TRIG0_STR” as the source.
The trigger fires my PXIe-5663 correctly, but the timing is not tight (> 5ns).
I would like to use the PXI Star trigger instead, I think that I should be able to acheive much better synchronization with this.
But NI-RFSA won't let me do this:
When I try to call
"niRFSA_ConfigureDigitalEdgeStartTrigger(rfsa_session, NIRFSA_VAL_PXI_STAR_STR , NIRFSA_VAL_RISING_EDGE)", I get the error:
"Specified Route Cannot Be Satisfied, Because the Hardware Does Not Support It"
I don't understand why the PXIe-5663E would not be able to use that Route.
Any idea?
Regards,
Serge
Serge Malo, ing.
Concepteur logiciel
Software Developer
T (514) 842-7577 x648 | [email protected]

That explanation isn't quite right. Usually, even PXIe modules have a connection to PXI_Star. The PXIe standard added the PXIe_DStar trigger buses, and it also preserved the PXI_Star bus from the PXI standard.
However, there is an additional twist in this situation. I'm assuming that your PXIe-5663 includes a PXIe-5622 as the digitizer. It turns out that a synchronization technique called NI-TClk has eliminated the need for our more recent digitizers to rely on triggering from PXI_Star. I was able to find some documentation that includes this information, here and here. Given that, I think you have two options that should result in better synchronization.
The first option is to use TClk; I found an example program that demonstrates using TClk to acheive phase coherent signal acquisition across two 5663s. The second option is to use cables of matched length to connect two PFI front panel terminals of the timing board (6672) to the PFI1 front panel terminals of the digitizers (5622). The timing board would accept the external trigger on PFI0 and then issue triggers on PFI1 and PFI2 with around 500 ps of skew (manual, page A-4) . The digitizers would use NIRFSA_VAL_PFI1_STR as the trigger. I hope one of these solutions will meet the demands of your particular application.
I will also follow up with the owners of the RFSA product documentation to see if we can include a note about why PXI_Star is not supported in some cases.
James Blair
NI R&D

How to use peak detection in labview to detect peaks from data acquisition information

Hi
I am a university engineering student who is working in a team to develop a coin detector, its purpose is to recognize different coinage and detect fakes.
For this we are using LabVIEW 8.5.1. I am relatively new to labview and have had no experience of using to before. We are trying to integrate four voltage signals produced by an electromagnet, straingauge, optical sensor and a proximity sensor. We have already developed signal conditioning for these tests and now wish to put them into labview.
Our plan is to use peak detection on each of the tests so that labview can detect peaks which correspond to different coin types, provided they meet set criteria for each coin. Then to combine these either using logic or mathscript to produce a Boolean output for each coin.
One of our advisors helped us develop a peak detection program for a simple simulated sine wave however we are struggling to adapt this for data acquisition information and itegrate it with mathscript and to be honest it does not make much sense. I have attached the program below. Thanks in advance for your assistance.
Attachments:
Strain 2.vi ‏25 KB

Chris,
Here are several ways to help you get started with peak detection:
1. On your functions palette, you can search for "peak detect" and you'll find several different variations of VIs that will do peak detection.
2. You may also want to take a look at this tutorial: Peak Detection Using LabVIEW and Measurement Studio
3. There's an example in the example finder called "Peak detection and display" that will probably be useful.
Hope this helps,
Misha

How to use PXI-8532 in LabVIEW Development Environment?

Similar Messages

Maybe you are looking for