How to use query-result as a new query-fiter

HI, All
Is it possible to execute sub-query filtererd by the pre-query-reslted lists ?
As far as I investigated, only way to do is that I combine two suject-areas by using set operations like "Union" or around.
But in this way, there is an impractical restriction to define these datatype and column in common. (namely, "Union" conditions)
I just want to query filtered by ex-query-results at anytime; for example, I extract a customer lists by one query and use various analysis in the group of customer list.
Please give me some advise.
Regards

First create a Request with your FilterQuerey. Secund Create a Request und create a Filter. Under Advanced you will find the path to the first Requst. Than you can select the columns.
Thats it :-)
Stefan

Similar Messages

How to use the result of a sql query for a max () function

Hi
I wrote a query on which i wrote
"select max(id) from users "
how can i use the returned value.
if i made the var name ="userid"
can it be userid.rows[0] or what.
thnx for any help

Hi!
The result of this query will be the max ID of users' IDs.
Let say we have:
String sql="select max(users.id) from users";
Statement st = ctx.conn.createStatement();
ResultSet rs = st.executeQuery(sql);
rs.next();
So you can get the max Id in the following way:
int maxId=rs.getInt("id");
Regards,
Rossi

How to use the "identify" feature in new 6.3.1 airport utility?

how to use the "identify" feature in new 6.3.1 airport utility?
so you can find the basestations in larger networks?

There is a workaround, which is to use Airport Utility 5.6.
I can confirm that 5.6 will run on 10.8.4 Mountain Lion, it will recognize the new 2013 Airport Extreme Base Station (A1521) running firmware 7.7.1, and it will give you access to view the device's Log & Statistics, DHCP Clients, and Profiles.
Four caveats:
1) The easiest way to install it is to download the app itself, not an installer or through the App Store. There is a page here where you can download the app: http://coreyjmahler.com/2013/03/08/airport-utility-5-6-on-os-x-v10-8-mountain-li on/ This way, you still have both versions, Airport Utility 6.x.x and 5.6.
2) When you launch 5.6, you'll get a message saying a newer version is available and asking if you want to update. Click Cancel to proceed into the utility.
3) When you click the Manual Setup button in 5.6, you'll get a warning dialog that "This version of AirPort Utility doesn't support this AirPort wireless device and might improperly configure the device if you continue to use it. Check www.apple.com/support/airport for the latest version of AirPort Utility." You can click Continue to get into the utility without issue.
4) You should probably only use 5.6 to view the additional status details. I have not tried to modify and save any AEBS settings using 5.6. There are other discussions here in the forums indicating that attempting to save settings via 5.6 that are no longer available in 6.3.1 will not actually save the settings to the AEBS even if both utilities indicate that the settings are changed. See https://discussions.apple.com/message/22677993#22677993
So, even though you can't use it to modify settings no longer available in Airport Utility 6.3.1, using Airport Utility 5.6 to view DHCP clients, Logs and Statistics is very useful for troubleshooting network issues.
PS - There are two ways to get to the DHCP Clients list, neither of which is obvious The first is to go to the Airport pane -> Summary tab and click on the "Wireless Clients:" label in the Summary display. All of the labels from "Wireless Mode:" down on the Summary display operate as links to view/edit the corresponding info/settings, which is also not obvious at first glance. Also not obvious, clicking on "Wireless Clients:" actually brings up a new pane with three tabs: Logs, Wireless Clients, and DHCP Clients. You can also get to the same pane by going to the Advanced pane and clicking on the Logs and Statistics button.
I hope this is helpful information. Took me a while to find out how to do this.

How to use my itunes with a new pc

how to use my itunes with a new pc?

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
If you have an iOS device that syncs with contact & calendar data on your computer you should migrate this information too. If that isn't possible create a dummy entry of each type in your new profile and iTunes should offer to merge the existing data from the device into the computer, otherwise the danger is that it will wipe the information from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data. If you don't have any Apple devices then see HT2519 - Downloading past purchases from the App Store, iBookstore, and iTunes Store.
tt2

How to Use Home+End Key on new short usb apple keyboard on XP

How to Use Home+End Key on new short usb apple keyboard on XP
now i use macbook and new short apple keyboard.
it hasn't Home and End key. i try to use Fn + -> , Fn + <-
it cann't do that. How can i set the Fn + <- be Home key
and Fn + -> be End key like on my macbook keyboard
thank you for answer

Easy, no need to be harsh. I might not be a Level 9  Discussions user, but I’ve been an Apple Technician for more than a decade now. So believe me, I know what I’m talking about. Be it OS X Server or emptying the Trash. But even I come here from time to time to learn from others. Well, back to topic and being a little more specific:
The 'My Info' setting always belongs to the first iCloud account you add to an iOS device. In this account you create at least 1 contact, the one you will be using for 'My Info'. You then do the same on your other iOS device using NOT the same iCloud account, of course. You only need to enable contacts syncing in iCloud preferences for these primary accounts. From here on you can use differing 'My Info' on your 2 iOS devices without a problem.
But you may know that you can use more than one iCloud account at a time. Only the primary one will offer all iCloud options like Photostream. But what they all offer is contacts, calendars, etc. So if you intend (and I did) to share these 2 between your devices you can add them using a second iCloud account to both of your iOS devices. This makes it 3 accounts all in all. You could even go further and add another one just for 'Find my iPhone' if you like.
I would’ve used the built-in sharing of Calendar.app instead, but Contacts.app does not (yet) offer sharing contacts with others. That’s why I went with the third iCloud account as a secondary account to both iOS devices.
Apple of course recommends using just one Apple ID for everything to make it easier. But in some scenarios this just won’t cut it, which is even described in one of their support documents.
I hope that now you have an idea what I’ve done…
Good night
Björn
PS: It would be nice if people did not insist on being right. They too can sometimes learn something!

How to use BAPI to add a new version for a claim number in WTY transaction.

How to use BAPI to add a new version for a claim number in WTY transaction.
I am using function module " BAPI_WARRANTYCLAIM_ADD_VERSION ".
It needs to copy all contents of previous version to a new version.
While doing so i am unable to copy fields like valic valoc etc. Any ways by which i can copy this values.
WTY will update PNWTYH , PNWTYV and PVWTY tables.
Thanking you,
Lokesh.

Hi Vishnu,
You can do that through EEWB. Please go through SAP Note 484597. You would get the details of using Easy Enhancement Work bench.
Rewards point if you think this info is useful
Regards,
Dipender Singh

How to use old nano ipod on new computer

How to use old nano ipod with new computer

Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

How to preserve ViewObject result when running 2nd query in new window?

I have a prompt.jsp page that users enter information which is used to pass parameters to a DataAction to filter a view object.
In the results.jsp page (built against the ViewObject's DataControl) I provide a drill facility that executes the same DataAction (passing different parameters) and pops-up a new window (results.jsp).
In results.jsp I have a 'Download to Excel' button. Obviously if I click this button in the first page I get the results of the second query. How do I preserve the values of the first ViewObject? Is there a way to create a new 'session' for each new browser window?
This is driving me mad!
Thanks,
Chris.

You can use tool area iview.
Duplicate the tool area iview. you can find this iview in Content provided by SAP -> Admin interfaces.
Tool area iview is nothing but the search iview in masthead area.
Once you made a local copy then give youe search option set and search component set.
You will get the results in a new window.
Raghu

How to use ABAP Class to modify Web Query Result ??

Hi all !
We are using Web Templates to display our Query.
What I would like to do ( and seems a really important issue for our users! ) is to have a "PAGE BREAK" everytime the value of a charateristics change in the report
For Example :
-Page 1-
Division     Project
   A               1
                    2
                    3
-Page 2-
Division     Project
   B               1
                    2
                    3
and so on....
I read threads about using ABAP CLASS but no example what so ever...
We are presently under BW 3.1 but are considering upgrading to 7.0 by the end of the year so if there is a solution to my problem on either version i'd like to know.
If anyone has any information about how I can do this it would be most appreciated
Thx
JB.

Hi Yong,
Ravi is right, first check the blogs by Jocelyn, and if you still have specific questions you can ask them. I have used ABAP classes in workflow and I know Mike Pokraka tries to use classes exclusively.
Regards,
Martin

How to Use separate web template to a query, when default one is configured

Hi,
A default template is configured in SPRO. and all the queries display data using this template. Now I want to display a particular query result in a separed template that is customised to suit the need.
how can I achieve it? When I customise template and attach query to it, it displays the result in this template, when executed from WAD. If I execute from Bex, The result is automatically displayed in the default template mensioned in SPRO.
Please advise.

If you want this template to be attached to this query alone - then you will have to have the same as a separate iView on portal.. when you execute from BEx the default template will get executed and by changing the default template all the queries will start using the default template... it is not possible for you to specify the template to be used when executing queries from BEx Query designer..

How to use same RESULT SET for two different events

hello friends,
I need to use same result set for two different events. How to do it.
here My code,
private void jComboBox1ItemStateChanged(java.awt.event.ItemEvent evt) {
// TODO add your handling code here:
try
String selstate,selitem;
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con=DriverManager.getConnection("jdbc:odbc:tourismdatasource","sa","");
selstate="select * from tab_places where state=?";
PreparedStatement ps=con.prepareStatement(selstate);
ps.setString(1, jComboBox1.getSelectedItem().toString().trim());
ResultSet rs=ps.executeQuery();
if(rs.next())
jTextField1.setText(rs.getString("place_ID"));
jTextField2.setText(rs.getString("place_name"));
jTextField3.setText(rs.getString("category"));
byte[] ba;
ba=rs.getBytes("image");
ImageIcon ic = new ImageIcon(ba);
jLabel6.setIcon(ic);
in=true;
catch(ClassNotFoundException cfe){JOptionPane.showMessageDialog(null, cfe.getMessage());}
catch(SQLException sqe){JOptionPane.showMessageDialog(null,sqe.getMessage());}
Now i need the same Result Set(rs), in another event(jButton6ActionPerformed),
private void jButton6ActionPerformed(java.awt.event.ActionEvent evt) {
// TODO add your handling code here:
} how do i get dat resultset,
help me out

One post wasn't enough?
{color:0000ff}http://forum.java.sun.com/thread.jspa?threadID=5246634{color}
db

How to Use the Procedures in a Sql Query

Hi Friends,
Can anyone help me out whether can we use the procedure in the sql query..
if yes help me out with an example
my requirement is
i have one sql query .. in which i need to use the procedure which returns multiple values... how can i overcome it,can anyone help me out for this..
for your reference i am pasting the sql query
SELECT paf.person_id
FROM per_all_assignments_f paf START WITH paf.person_id = p_person_id
AND paf.primary_flag = 'Y'
AND paf.assignment_type IN('E', 'C')
AND l_effective_date BETWEEN paf.effective_start_date
AND paf.effective_end_date
CONNECT BY PRIOR paf.supervisor_id = paf.person_id
AND paf.primary_flag = 'Y'
AND paf.assignment_type IN('E', 'C')
AND l_effective_date BETWEEN paf.effective_start_date
AND paf.effective_end_date
and paf.person_id not in (>>>I HAVE TO USE THE PROCEDURE HERE<<<<);
Thanks in advance

We never saw your procedure, but maybe you could wrap it in a function
SQL> create or replace procedure get_members(in_something IN number, out_members OUT sys_refcursor)
is
begin
open out_members for
    'select level member_id from dual connect by level <= :num' using in_something;
end get_members;
Procedure created.
SQL> create or replace type numbers as table of number;
Type created.
SQL> create or replace function members(in_something IN number)
return numbers
as
member_cur sys_refcursor;
members numbers;
begin
get_members(in_something, member_cur);
fetch member_cur bulk collect into members;
close member_cur;
return members;
end;
Function created.
SQL> select * from table(members(4));
COLUMN_VALUE
           1
           2
           3
           4
4 rows selected.Variant on same using piplined function
SQL> create or replace function members_piped(in_something IN number)
return numbers pipelined
as
member_cur sys_refcursor;
rec number;
begin
get_members(in_something, member_cur);
loop
     fetch member_cur into rec;
     exit when member_cur%notfound;
     pipe row(rec);
end loop;
close member_cur;
return;
end;
Function created.
SQL> select * from table(members_piped(4));
COLUMN_VALUE
           1
           2
           3
           4
4 rows selected.
SQL> drop function members_piped;
Function dropped.
SQL> drop function members;
Function dropped.
SQL> drop type numbers;
Type dropped.
SQL> drop procedure get_members;
Procedure droppedEdit:
Sorry Blu, had not seen you already posted similar thing
Edited by: Peter on Jan 27, 2011 5:38 AM

How to get the text for the new query

Hi all...
we have created a new query by copy of existing query. iwe have changed only the sales area in the filter.
when we run the original query in japan language, getting japan text for the material where as for the new query it is not getting japan text.
we have extracted text masterdata for sales area but when we run the query it is not displaying material description in japan language.
how to get text for the material in the new query?
thanks

hi,
What is the output for text filed you are getting as of now?
Check the properties of the material in old query?
Generate the query in tcode RSRT and execute and check.
Check if the Display as properties is selected as "Key and Text".
try to replace it back(sales area) in filters and check in new query - if u are getting the desired output or not.
Regards
KP

How to use MAX function in SSAS MDX Query

I want to run this Query with MAX Condition on LAST_DATA_UPDATE Column .

Hi Ashishsingh,
According to your description, you want to know how to use MAX function in SQL Server Analysis Services MDX Query, right? In this case, please refer to the link below which describe the syntax and sample of MDX function.
http://technet.microsoft.com/en-us/library/ms145601.aspx
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=64
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support

How to use Field-symbol with dynamic select query

Can anybody tell me, how to use field-symbols in the dynamic select query.

FIELD-SYMBOLS <fs> { typing | STRUCTURE struc DEFAULT dobj }.
1. ... typing
2. ... STRUCTURE struc DEFAULT dobj
The FIELD-SYMBOLS statement declares a field symbol <fs>. The name conventions apply to the name fs. The angle brackets of the field symbols indicate the difference to data objects and are obligatory. You can declare field symbols in any procedure and in the global declaration section of an ABAP program, but not in the declaration section of a class or an interface. You can use a field symbol in any operand position in which it is visible and which match the typing defined using typing.
After its declaration, a field symbol is initial - that is, it does not reference a memory area. You have to assign a memory area to it (normally using the ASSIGN statement) before you can use it as an operand. Otherwise an exception will be triggered.
eg.
FIELD-SYMBOLS <fs> TYPE ANY.
DATA: BEGIN OF line,
        string1(10) VALUE '0123456789',
        string2(10) VALUE 'abcdefghij',
      END OF line.
WRITE / line-string1+5.
ASSIGN line-string1+5(*) TO <fs>.
WRITE / <fs>.
output:
56789
56789
reward if helpful
anju

How to use query-result as a new query-fiter

Similar Messages

Maybe you are looking for