How to use Stored Procedures with SQLServer2005 and WAS 6.x

Hi All
I've got a problem, during the call to a StoredProcedure in SQLServer i've get the next message:
Exception : com.microsoft.sqlserver.jdbc.SQLServerException: Fetch size cannot be negative
The stored procedure is working correctly if I run my process out of WAS 6.x but if I get a connection from the pool the process don't work.
Help please, thanks.

Your procedure has a single OUT parameter ... and yet it appears you are trying to stuff something into it ... that is never going to work. Additionally everything else about your stored procedure would have gotten you a FAIL grade were you been in my beginning PL/SQL class.
The syntax, a cursor loop, is obsolete and has been for more than 10 years.
The formatting and use of case makes even the few lines written hard to read.
And either no commit ever takes place or you are trying to do incremental commits in origseq: Both of which are bad practice.
This code should use BULK COLLECT to collect all relevant records into an array and then pass the array to origseq ... no loops ... and end with a commit.
Demo here: http://www.morganslibrary.org/reference/array_processing.html

Similar Messages

How to use stored procedures in DIAdem and Can the stored procedures be used to return values?

Can anyone please tell me how to use stored procedures in diadem and to return values from it. Its really important, can you please answer it at the earliest.
Thanks In advance
spiya

Hi Spria,
I'm very sorry for the mix-up, I thought Allen was going to answer you back with the particulars that we found out. Check out the attached Word document and the below tidbits:
The built-in DIAdem ODBC functions {SQL_...()} can only call stored functions, which return a scaler result {found then in SQL_Result(1,1)}. The syntax for this with an ORACLE db is
"select function(parameters) from package"
...where package defaults to "dual" if you don't use your own package.
There might be exceptions to that though, and the syntax will be different for other databases. Note that stored ORACLE procedures can NOT be called from the ODBC functions, instead you must use either ADO function calls in the DIA
dem VBScript or the OO4O COM wrapper that ORACLE provides (this is described in further detail in the below Word document).
Hope this helps,
Brad Turpin
DIAdem Product Support Engineer
National Instruments
Attachments:
Calling_ORACLE_Stored_Procedures_from_DIAdem.doc ‏28 KB

Please help - Can not use stored procedure with CTE and temp table in OLEDB source

Hi,
I am going to create a simple package. It has OLEDB source , a Derived transformation and a OLEDB Target database.
Now, for the OLEDB Source, I have a stored procedure with CTE and there are many temp tables inside it. When I give like EXEC <Procedure name> then I am getting the error like ''The metadata could not be determined because statement with CTE.......uses
temp table.
Please help me how to resolve this ?

you write to the temp tables that get created at the time the procedure runs I guess
Instead do it a staged approach, run Execute SQL to populate them, then pull the data using the source.
You must set retainsameconnection to TRUE to be able to use the temp tables
Arthur My Blog

How to use stored procedure with many return results and variable with perl

Hi everybody,
i´m writtting now a Perl programm, wich use a oracle stored procedure with more than 1 result and 1 variable(I have to return 2 variable fpr each result). I don´t now how I can get it.I already search the web but I didn´t find.
My example:
PROCEDURE get_projects_and_sub_projects (
v_project_id IN INTEGER,
v_project_c_id OUT INTEGER,
v_project_id_find OUT VARCHAR2
IS
BEGIN
SELECT c_id, proj_id
INTO
v_project_c_id,
v_project_id_find
FROM t_projet
WHERE t_projet .ksa_pro_art_kbz = 'KU'
AND t_projet.proj_id LIKE v_project_id || '%';
EXCEPTION
WHEN NO_DATA_FOUND
THEN
v_project_c_id := NULL;
v_project_id_find := NULL;
WHEN OTHERS
THEN
kmessages.error (NULL,
'get_projects_and_sub_projects',
'Project-Name: ' || v_project_id,
'Errornumber: '
|| SQLCODE
|| ' Error: '
|| SQLERRM,
TRUE,
TRUE
raise_application_error (-20001,
'Error '
|| SQLCODE
|| ' get_projects_and_sub_projects: '
|| SQLERRM,
TRUE
END get_projects_and_sub_projects;
in Perl Program:
sub get_projects_unterprojects_name($$){
my ($db_handle, $proj_name_id) = @_; #$db_handle ist the DB Connection return value
my $db_proj_c_id;
my $db_proj_name;
eval{ my $csr = $db_handle->prepare(q{
BEGIN
pro_doc_ber.get_projects_and_sub_projects(:proj_name_id, :db_proj_c_id, :db_proj_name);
END;
# parameter value
$csr->bind_param(":proj_name_id", $proj_name_id);
# return values
$csr->bind_param_inout(":db_proj_c_id", \$db_proj_c_id, 11);
$csr->bind_param_inout(":db_proj_name", \$db_proj_name, 20);
$csr->execute(); };
But this didn´t work. Could somebody give me some idea?
Thank you
Felx

Some additional info would probably be helpful.
What is your programming enviironment? Java?
In any case I suspect that you will need to use the OCI to deal with specific Oracle types such as user defined object types -- thats not standard ANSI SQL.
In Java I believe you need to use OPAQUE, there are some examples out there. I'm mostly a PL/SQL developer with some Java expereince so others here are more qualifed to answer your question more directly.

Using stored procedures with a timestamp parameter with Delphi and ADO

Dear Oracle experts,
I have a problem concerning using a stored procedure with Delphi.
I try to use a stored procedure which hast two input parameters ( a integer and a timestamp).
The timestamp parameter is my problem since I would like to use the "to_timestamp"
Oracle-function to create the timestamp parameter to be inserted into my procedure.
If I insert the to_timestamp statement as a adodatetime I have to perform the conversion to the oracle timestamp in my application.
If I want to use the to_timestamp statement I have to use the ftstring datatype but in that case I get an error because I use a string as input for my procedure were it awaits a timestamp.
So the problem seems to be that the function call "to_timestamp" is not interpreted if it is transferred through my ADO component.
Do you know how to use a procedure with Delphi (ADO) with a function as input parameter ?
Best regards,
Daniel Wetzler
P.S. :
This is the Delphi code to use my Procedure.
FactsTempDS:=TADODataset.Create(nil);
Sproc1 := TAdoStoredProc.Create(nil);
Sproc1.Connection := TDBConnection(strlistConnectionstrings.objects[iConnectionIndex]).Connection;
Sproc1.ProcedureName := 'ECSPACKAGE.PROCFINDINITIALSWITCHSTATE';
Sproc1.Parameters.CreateParameter ('SwitchID',ftInteger,pdinput,0,0);
//Sproc1.Parameters.CreateParameter ('StartTime',ftdatetime,pdinput,50,0);
Sproc1.Parameters.CreateParameter ('StartTime',ftString,pdinput,50,0);
Sproc1.Parameters.Findparam('SwitchID').value:=SwitchID;
Sproc1.Parameters.FindParam('StartTime').Value:= 'to_timestamp(''2005/12/30 19:36:21'', ''YYYY/MM/DD HH:MI:SS'')';
Sproc1.CursorType := ctKeyset;
Sproc1.ExecuteOptions:=[];
Sproc1.Open;
Sproc1.Connection := nil;
FactsTempDS.Recordset:= sproc1.Recordset;
if FactsTempDS.RecordCount=0
then raise Exception.Create('No line switch variable found for switch '+IntToStr(SwitchID)+' before starttime. Check BDE dump filter.')

I have my entity manager setup in a singleton.
I'm finding it's costly to generate the emf, but if I don't close the em (enitity manager) and emf (entity manager factory) my open cursor count climbs until I exceed the max number of open cursors on the database (11g RAC)
I'm committing the connection, and uow, and closing the em at the end of each call.
But until I close the emf, the open cursors aren't released.
TransactionhistoryPkg tranPkg = new TransactionhistoryPkg(conn); //Class created over database package via JPublisher
tranPkg.transactionhistoryInsSp(insertTrans.getCardId()); // executes db package
tranPkg.closeConnection();
conn.commit();
uow.commit();
uow.getAccessor().decrementCallCount();
em.close();
Am I missing something really obvious here??
btw - I found this link helpful in troubleshooting the max cursors issue: https://support.bea.com/application_content/product_portlets/support_patterns/wls/InvestigatingORA-1000MaximumOpenCursorsExceededPattern.html

How to use Stored Procedures in JDBC sender side and receiver side

Hello,
Can anyone explain how to use stored procedures in configuring the scenario using JDBC adapter at bothe sides sender nad receiver..
Thanks,
Soorya

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

Can Stored procedure with IN and OUT Paramter can be used in JDBC LOOKUP?

can Stored procedure with IN and OUT Paramter can be used in JDBC LOOKUP?

Checking online help, I do not see any possibility.
"Queries a data base by the given SQL statement."
http://help.sap.com/javadocs/pi/pi711sp03/com/sap/aii/mapping/lookup/DataBaseAccessor.html
-> execute

How to use Stored Procedure Call in Sender JDBC adapter

Hi All,
Could someone send me a blog on how to use Stored Procedure call in Sender JDBC adapter?
Xier

Hi Xler
refer these links
/people/yining.mao/blog/2006/09/13/tips-and-tutorial-for-sender-jdbc-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
Also, you can check Sriram's blog for executing Stored Procedures,
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
/people/jegathees.waran/blog/2007/03/02/oracle-table-functions-and-jdbc-sender-adapter
This blog might be helpfull on stored procedures for JDBC
JDBC Stored Procedures
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
Please go through these threads and see if it helps...
Re: How to execute Stored Procedure?
Re: Problem with JDBC stored procedure
Thnaks !!

HOW TO USE STORED PROCEDURES IN JASPERREPORTS(URJENT)

Hi,
i'm using jasperreports in struts based project. How to use stored procedures in jasperreports. pls send the solution urjent
Thanks in advance
ramesh

Hi,
Refer the below link:
JDBC:
Receiver JDBC scenario MS access - /people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 --> for jdbc receiver: file -JDBC
Stored Procedures-
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
http://www.ics.com/support/docs/dx/1.5/tut6.html
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://www.ics.com/support/docs/dx/1.5/tut6.html
http://java.sun.com/docs/books/tutorial/jdbc/basics/sql.html
http://www.sqlteam.com/article/stored-procedures-an-overview
HI in the message mapping structure u need to specify the different action and also u need to specify the procedure name.
refer the below link which has all the associated action
http://help.sap.com/saphelp_nw04s/helpdata/en/22/b4d13b633f7748b4d34f3191529946/frameset.htm
Chirag

How to use Stored Procedures in form 6i Blocks

Dear Friends,
I would like to know how to use Stored Procedures while creating blocks in Data Block Wizard in forms 6i application.
Please send me sample code of stored procedure.
Regards,
Khader.

The Data Block Wizard is not for creating stored procedures. It will allow you to use a stored procedure in your form. See the help documentation for how to use the wizard.
Here's an example of a simple procedure. If you search the database forum or the web, you will find many examples.
CREATE OR REPLACE PROCEDURE procedure_name (value OUT NUMBER ) AS
BEGIN
SELECT COUNT(*) INTO value
FROM your_table;
END;
Message was edited by:
Mark Roberts

Using stored procedures with dabasae controls

Hi. We have two questions.
Answer 1:
We are working with Sybase and we are trying to use stored procedures (SP) with databse controls but we don't know how to obtain SP's return. We can to use SP normally if that SP don't have any return. Next example works fine but "stored_procedure_name" actually returns an number (error code) and we need to obtain it:
* @jc:sql statement="{call stored_procedure_name (?)}"
Answer 2:
Do you know how to call SP dinamically? This mean to call an sql statemente where stored_procedure_name and its parameters could be pased as paremeters. That looks as:
* @jc:sql statement="{call {sql: spName} {sql: listOfParameters}}"
Thak you very much for your comments.
Regards.

I have my entity manager setup in a singleton.
I'm finding it's costly to generate the emf, but if I don't close the em (enitity manager) and emf (entity manager factory) my open cursor count climbs until I exceed the max number of open cursors on the database (11g RAC)
I'm committing the connection, and uow, and closing the em at the end of each call.
But until I close the emf, the open cursors aren't released.
TransactionhistoryPkg tranPkg = new TransactionhistoryPkg(conn); //Class created over database package via JPublisher
tranPkg.transactionhistoryInsSp(insertTrans.getCardId()); // executes db package
tranPkg.closeConnection();
conn.commit();
uow.commit();
uow.getAccessor().decrementCallCount();
em.close();
Am I missing something really obvious here??
btw - I found this link helpful in troubleshooting the max cursors issue: https://support.bea.com/application_content/product_portlets/support_patterns/wls/InvestigatingORA-1000MaximumOpenCursorsExceededPattern.html

How to change stored procedure with Table Valued Parameter

I am not sure how to change the normal stored procedure with Table Value Parameter.Do I have to create a separate Table or do I have to create a datatype. Can you please help me with this
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF]
@dp_id char(32),
@dv_id char(32),
@em_number char(12),
@email varchar(50),
@emergency_relation char(32),
@option1 char(16),
@status char(20),
@em_id char(35),
@em_title varchar(64),
@date_hired datetime
AS
BEGIN
SET NOCOUNT ON;
MERGE [dbo].[em] AS [Targ]
USING (VALUES (@dp_id, @dv_id , @em_number, @email, @emergency_relation, @option1, @status, @em_id, @em_title, @date_hired))
AS [Sourc] (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired)
ON [Targ].em_id = [Sourc].em_id
WHEN MATCHED THEN
UPDATE
SET dp_id = [Sourc].dp_id,
dv_id = [Sourc].dv_id,
em_number = [Sourc].em_number,
email = [Sourc].email,
emergency_relation = [Sourc].emergency_relation,
option1 = [Sourc].option1,
status = [Sourc].status,
em_title = [Sourc].em_title,
date_hired = [Sourc].date_hired
WHEN NOT MATCHED BY TARGET THEN
INSERT (dp_id, dv_id, em_number, email, emergency_relation, option1, status, em_id, em_title,date_hired)
VALUES ([Sourc].dp_id, [Sourc].dv_id, [Sourc].em_number, [Sourc].email, [Sourc].emergency_relation, [Sourc].option1, [Sourc].status, [Sourc].em_id, [Sourc].em_title, [Sourc].date_hired);
END;

It's not clear how you would change the procedure. But assuming that you want to replace the existing scalar parameters with tabular input, this is how you would do it. You first create a table type:
CREATE TYPE Insertor_type AS TABLE
(dp_id char(32),
   dv_id char(32),
em_number char(12),
email varchar(50),
emergency_relation   char(32),
option1 char(16),
status    char(20),
em_id char(35),
em_title    varchar(64),
date_hired    datetime)
Then you change the procedure header:
ALTER PROCEDURE [dbo].[uspInsertorUpdateINF] @tvp Insertor_type READONLY AS
And finally you change the USING clause:
   USING (SELECT dp_id, dv_id , em_number, email, emergency_relation, option1, status, em_id, em_title, date_hired
FROM   @tvp) AS [Sourc] ON [Targ].em_id = [Sourc].em_id
The rest is fine as it is.
Erland Sommarskog, SQL Server MVP, [email protected]

Calling a stored procedure with RAW and SYS_REFCURSOR

How do you call a stored procedure with the following input and output parameters?
create or replace PROCEDURE test
v_col1 IN NUMBER DEFAULT NULL ,
v_col2 IN VARCHAR2 DEFAULT NULL ,
v_col3 IN RAW DEFAULT NULL ,
v_vol4 IN DATE DEFAULT NULL,
cv_1 IN OUT SYS_REFCURSOR
OPEN cv_1 FOR
SELECT
lv_tmp1 aaaa ,
lv_tmp2 bbbb,
lv_tmp3 cccc
FROM DUAL ;
END;
Edited by: 925963 on Apr 6, 2012 10:50 AM

Did you try just declaring the vars?
untested
declare
myCur SYS_REFCURSOR;
myRaw RAW(4);
BEGIN
test (0, 0, myRaw, sysdate, myCur);
END;

How to call stored procedure with multiple parameters in an HTML expression

Hi, Guys:
Can you show me an example to call stored procedure with multiple parameters in an HTML expression? I need to rewrite a procedure to display multiple pictures of one person stored in database by clicking button.
The orginal HTML expression is :
<img src="#OWNER#.dl_sor_image?p_offender_id=#OFFENDER_ID#" width="75" height="75">which calls a procedure as:
procedure dl_sor_image (p_offender_id IN NUMBER)now I rewrite it as:
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number)could anyone tell me the format for the html expression to pass multiple parameters?
Thanks a lot.
Sam

Hi:
Thanks for your help! Your question is what I am trying hard now. Current procedure can only display one picture per person, however, I am supposed to write a new procedure which displays multiple pictures for one person. When user click a button on report, APEX should call this procedure and returns next picture of the same person. The table is SOR_image. However, I rewrite the HTML expression as follows to test to display the second image.
<img src="#OWNER#.Sor_Display_Current_Image?p_n_Offender_id=#OFFENDER_ID#&p_n_image_Count=2" width="75" height="75"> The procedure code is complied OK as follows:
create or replace
PROCEDURE Sor_Display_Current_Image(p_n_Offender_id IN NUMBER, p_n_image_Count in number) AS
    v_mime_type VARCHAR2(48);
    v_length NUMBER;
    v_name VARCHAR2(2000);
    v_image BLOB;
    v_counter number:=0;
    cursor cur_All_Images_of_Offender is
      SELECT 'IMAGE/JPEG' mime_type, dbms_lob.getlength(image) as image_length, image
      FROM sor_image
      WHERE offender_id = p_n_Offender_id;
    rec_Image_of_Offender cur_All_Images_of_Offender%ROWTYPE;
BEGIN
    open cur_All_Images_of_Offender;
    loop
      fetch cur_All_Images_of_Offender into rec_Image_of_Offender;
      v_counter:=v_counter+1;
      if (v_counter=p_n_image_Count) then
        owa_util.mime_header(nvl(rec_Image_of_Offender.mime_type, 'application/octet'), FALSE);
        htp.p('Content-length: '||rec_Image_of_Offender.image_length);
        owa_util.http_header_close;
        wpg_docload.download_file (rec_Image_of_Offender.image);
      end if;
      exit when ((cur_All_Images_of_Offender%NOTFOUND) or (v_counter>=p_n_image_Count));
    end loop;
    close cur_All_Images_of_Offender;
END Sor_Display_Current_Image; The procedure just open a cursor to fetch the images belong to the same person, and use wpg_docload.download_file function to display the image specified. But it never works. It is strange because even I use exactly same code as before but change procedure name, Oracle APEX cannot display an image. Is this due to anything such as make file configuration in APEX?
Thanks
Sam

XI/PI: jdbc receiver using stored procedure with arrays

The company needs an interface to search for header data and detail to a legacy system.
This interface from ERP to legacy system is synchronous and uses stored procedure.
The definition of the stored procedure is as follows:
PROCEDURE
Generar_Detalle_Vtas_Pagadas
    (p_cvendedor                 IN bdc_vendedores.cvendedor%TYPE,
    p_fdesde                   IN DATE,
    p_fhasta                     IN DATE,
    v_encabezado_ct           OUT encabezado_ct,
    v_detalle_vtas_pagadas_ct OUT detalle_vtas_pagadas_ct,
    err_num                 OUT NUMBER
Data types used in stored procedure:
TYPE encabezado_ct AS OBJECT
( CREGION         NUMBER(22),
XREGION         VARCHAR2(50),
CMERCADO        NUMBER(22),
XMERCADO        VARCHAR2(50),
CTVENDEDOR      VARCHAR2(5),
XCTVENDEDOR     VARCHAR2(50),
XDENOMINACION   VARCHAR2(15))
TYPE detalle_vtas_pagadas_ct AS OBJECT
(     CITEM           VARCHAR2(10),
      XIDENTIFICADOR VARCHAR2(15),
      XCONTRATO       VARCHAR2(15),
      XVALOR          VARCHAR2(30),
      CCUENTA         VARCHAR2(15),
      FACTIVACION     DATE,
      XDOMINIO        VARCHAR2(30),
      CCED            VARCHAR2(20),
      XCLIENTE        VARCHAR2(161),
      CCPO            VARCHAR2(60) )
As shown, this has three input parameters varchar and date respectively and has three output parameters, two of which are defined with a data
type such as table and the other number.
The problem is to define the signature of the stored procedure in XI when defining the data type request, the message type and mapping system
legacy because the data type is not supported (tables: detalle_vtas_pagadas_ct,encabezado_ct )

FORM 2:
defined as an array, but the error tells me that we need to define the attribute either input or output
<?xml version="1.0" encoding="UTF-8"?>
     <ns0:MT_VtasPagadas_VYC xmlns:ns0="urn:VentasPagadas:VE_ALTASDEDCALIDAD_SD_VYC">
      <VtasPagadasRequest><Generar_Detalle_Vtas_Pagadas action="EXECUTE">
         <table>vyc.Vyc_Pack_Reportes_Sap.Generar_Detalle_Vtas_Pagadas</table>
         <p_cvendedor type="VARCHAR"></p_cvendedor>
         <p_fdesde type="DATE"></p_fdesde>
         <p_fhasta type="DATE"></p_fhasta>
         <v_encabezado_ct>
             <CREGION isOutput="1" type="NUMERIC">X</CREGION>
             <XREGION isOutput="1" type="VARCHAR">X</XREGION>
             <CMERCADO isOutput="1" type="NUMERIC">X</CMERCADO>
             <XMERCADO isOutput="1" type="VARCHAR">X</XMERCADO>
             <CTVENDEDOR isOutput="1" type="VARCHAR">X</CTVENDEDOR>
             <XCTVENDEDOR isOutput="1" type="VARCHAR">X</XCTVENDEDOR>
             <XDENOMINACION isOutput="1" type="VARCHAR">X</XDENOMINACION>
        </v_encabezado_ct>
        <v_detalle_vtas_pagadas_ct>
             <CITEM isOutput="1" type="VARCHAR">X</CITEM>
             <XIDENTIFICADOR isOutput="1" type="VARCHAR">X</XIDENTIFICADOR>
             <XCONTRATO isOutput="1" type="VARCHAR">X</XCONTRATO>
             <XVALOR type="VARCHAR">X</XVALOR>
             <CCUENTA isOutput="1" type="VARCHAR">X</CCUENTA>
             <FACTIVACION isOutput="1" type="DATE">X</FACTIVACION>
             <ICTA isOutput="1" type="VARCHAR">X</ICTA>
             <CCED isOutput="1" type="VARCHAR">X</CCED>
             <XCLIENTE isOutput="1" type="VARCHAR">X</XCLIENTE>
             <CCPO isOutput="1" type="VARCHAR">X</CCPO>
        </v_detalle_vtas_pagadas_ct>
        <err_num isOutput="1" type="NUMERIC">X</err_num>
     </Generar_Detalle_Vtas_Pagadas>
</VtasPagadasRequest></ns0:MT_VtasPagadas_VYC>
Edited by: ymonasterio on Mar 31, 2010 4:48 PM

How to use Stored Procedures with SQLServer2005 and WAS 6.x

Similar Messages

Maybe you are looking for