How to use the BAPI BAPI_ALM_ORDER_MAINTAIN

HI experts,
I am using BAPI_ALM_ORDER_MAINTAIN to update the Object list in ECC 6.0 for a service order txn code IE31.
I dont know how to use this BAPI_ALM_ORDER_MAINTAIN for object list updation.
It will be very helpful if anyone who worked on this or know about BAPI_ALM_ORDER_MAINTAIN how to use, plz reply this thread.
I am really searching for along time about the bapi, but couldnt getany thing.
the doc of BAPI_ALM_ORDER_MAINTAIN is very vague, that i m not able to understand.
So, sap persons, plz reply this thread,
Ntk

Friends,
I am getting the following message with the FM BAPI_ALM_ORDER_MAINTAIN,  "Order  is changed, but not created".
But when i see the Service Order, im not able to see the new equipments added in the Object tab.
Here is my code...
DATA: l_alm_bapi TYPE c,
      T_METHODS TYPE STANDARD TABLE OF bapi_alm_order_method,
      ls_methodS TYPE bapi_alm_order_method,
      LS_OBJ type bapi_alm_order_objectlist,
      lt_OBJ type standard table of bapi_alm_order_objectlist,
      lt_operation
         TYPE STANDARD TABLE OF bapi_alm_order_objectlist,
      ls_operation TYPE bapi_alm_order_objectlist,
      lt_oBJ_up
         TYPE STANDARD TABLE OF bapi_alm_order_olist_up,
      ls_oBJ_up TYPE bapi_alm_order_olist_up,
      lt_return TYPE STANDARD TABLE OF bapiret2,
            lt_return1 like BAPIRET2,
      ls_return TYPE bapiret2,
      LS_NUMBERS TYPE   BAPI_ALM_NUMBERS,
     T_NUMBERS TYPE STANDARD TABLE OF BAPI_ALM_NUMBERS.
CLEAR T_METHODS.
LS_METHODS-REFNUMBER = 1.
LS_METHODS-OBJECTTYPE = ''.
LS_METHODS-METHOD = 'SAVE'.
LS_METHODS-OBJECTKEY = '%00000000001'..
APPEND LS_METHODS TO T_METHODS.
LS_METHODS-REFNUMBER = 1.
LS_METHODS-OBJECTTYPE = 'OBJECTLIST'.
LS_METHODS-METHOD = 'CHANGE'.
LS_METHODS-OBJECTKEY = '%00000000001'..
APPEND  LS_METHODS TO T_METHODS.
CLEAR T_NUMBERS.
LS_NUMBERS-AUFNR_IN = '000004010558'..
APPEND LS_NUMBERS TO  T_NUMBERS.
LS_OBJ-COUNTER = 1.
LS_OBJ-FUNCT_LOC = '5619'.
LS_OBJ-EQUIPMENT = '0000010000292'.
LS_OBJ-SORTFIELD = 'X'.
ls_oBJ-PROCESSING_IND = 'X'.
ls_oBJ-SERIALNO = ''.
ls_oBJ-SERMAT = '0010-30000'.
ls_oBJ-DESCRIPTN = 'MAIN UNIT DR300'.
APPEND LS_OBJ TO LT_OBJ.
LS_OBJ_UP-SORTFIELD = 'X'.
LS_OBJ_UP-PROCESSING_IND = 'X'.
APPEND LS_OBJ_UP TO LT_OBJ_UP.
CALL FUNCTION 'BAPI_ALM_ORDER_MAINTAIN'
  TABLES
    IT_METHODS              = T_METHODS
  IT_HEADER               =
  IT_HEADER_UP            =
  IT_HEADER_SRV           =
  IT_HEADER_SRV_UP        =
  IT_USERSTATUS           =
  IT_PARTNER              =
  IT_PARTNER_UP           =
  IT_OPERATION            =
  IT_OPERATION_UP         =
  IT_RELATION             =
  IT_RELATION_UP          =
  IT_COMPONENT            =
  IT_COMPONENT_UP         =
   IT_OBJECTLIST           = LT_OBJ
   IT_OBJECTLIST_UP        = LT_OBJ_UP
  IT_OLIST_RELATION       =
  IT_TEXT                 =
  IT_TEXT_LINES           =
  IT_SRULE                =
  IT_SRULE_UP             =
  IT_TASKLISTS            =
  EXTENSION_IN            =
   RETURN                  = LT_RETURN
   ET_NUMBERS              = T_NUMBERS.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN = lt_return1.
Kindly help me out anyone who has worked with these FM. I am not able to do this.

Similar Messages

  • How to use the BAPI:BAPI_PAYM_ITEM_POST_CLEARING

    Hi,
    What are the input parameters to give for the  BAPI BAPI_PAYM_ITEM_POST_CLEARING..and what it Returns ?.Can you give me small example?.
    Regards,
    Kiran.
    Edited by: SPY SPY on Jan 22, 2008 11:06 AM

    You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
    Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
          BATCH.
          MOVE_TYPE.
          ENTRY_QNT.
          MOVE_PLANT.
          MOVE_STLOC.
          MOVE_BATCH.
          MOVE_REAS
    these parameters.
    Regards,
    Sushil.

  • How to use the bapi   BAPI_PO_CREATE1

    HI,
    CAN ANY ONE TELL ME HOW TO GET THIS FM WORK TO CREATE A PURCHASE ORDER.

    Hi Preeti,
    Refer sample code:
    *& Report  YDM_PO_CREATE                                               *
    REPORT  ydm_po_create.
    *-- Input File Declaration
    TYPES: BEGIN OF ty_input_file,
           column1 TYPE char50,
           column2 TYPE char50,
           column3 TYPE char50,
           column4 TYPE char50,
           column5 TYPE char50,
           column6 TYPE char50,
           column7 TYPE char50,
           column8 TYPE char50,
           column9 TYPE char50,
           column10 TYPE char50,
           column11 TYPE char50,
           column12 TYPE char50,
           column13 TYPE char50,
           column14 TYPE char50,
           column15 TYPE char50,
           column16 TYPE char50,
           column17 TYPE char50,
           column18 TYPE char50,
    END OF ty_input_file.
    DATA: i_input_file  TYPE STANDARD TABLE OF ty_input_file,
          wa_input_file TYPE ty_input_file.
    CONSTANTS: c_path     TYPE char20 VALUE 'C:\',
               c_mask     TYPE char9  VALUE ',*.*,*.*.',
               c_mode     TYPE char1  VALUE 'O',
               c_filetype TYPE char10 VALUE 'ASC',
               c_x        TYPE char01 VALUE 'X'.
    PARAMETERS : p_fname   LIKE rlgrap-filename.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
    *-- Browse Presentation Server
      PERFORM f4_presentation_file.
    START-OF-SELECTION..
    *-- Read presentation server file
      PERFORM f1003_upload_file.
      IF NOT i_input_file[] IS INITIAL.
        PERFORM split_data.
      ENDIF.
    *&                  Form  f4_presentation_file
    *&                F4 Help for presentation server
    FORM f4_presentation_file .
      CALL FUNCTION 'WS_FILENAME_GET'
        EXPORTING
          def_path         = c_path
          mask             = c_mask
          mode             = c_mode
          title            = text-001
        IMPORTING
          filename         = p_fname
        EXCEPTIONS
          inv_winsys       = 1
          no_batch         = 2
          selection_cancel = 3
          selection_error  = 4
          OTHERS           = 5.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    ENDFORM.                    " f4_presentation_file
    *&                      Form  f1003_upload_file
    *&                         Upload File
    FORM f1003_upload_file .
      DATA: lcl_filename TYPE string.
      lcl_filename = p_fname.
      CALL FUNCTION 'GUI_UPLOAD'
        EXPORTING
          filename                = lcl_filename
          filetype                = c_filetype
          has_field_separator     = c_x
        TABLES
          data_tab                = i_input_file
        EXCEPTIONS
          file_open_error         = 1
          file_read_error         = 2
          no_batch                = 3
          gui_refuse_filetransfer = 4
          invalid_type            = 5
          no_authority            = 6
          unknown_error           = 7
          bad_data_format         = 8
          header_not_allowed      = 9
          separator_not_allowed   = 10
          header_too_long         = 11
          unknown_dp_error        = 12
          access_denied           = 13
          dp_out_of_memory        = 14
          disk_full               = 15
          dp_timeout              = 16
          OTHERS                  = 17.
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        EXIT.
      ENDIF.
    ENDFORM.                    " f1003_upload_file
    *&      Form  split_data
          Collect data for creating Purchase Order
    FORM split_data .
      DATA: i_poitem        TYPE STANDARD TABLE OF bapimepoitem,
            i_poitemx       TYPE STANDARD TABLE OF bapimepoitemx,
            i_poitem_sch    TYPE STANDARD TABLE OF bapimeposchedule,
            i_poitem_schx   TYPE STANDARD TABLE OF bapimeposchedulx,
            i_acct_***      TYPE STANDARD TABLE OF bapimepoaccount,
            i_acct_assx     TYPE STANDARD TABLE OF bapimepoaccountx,
            i_services      TYPE STANDARD TABLE OF bapiesllc ,
            i_srvacc        TYPE STANDARD TABLE OF bapiesklc,
            i_return        TYPE STANDARD TABLE OF bapiret2,
            wa_header       TYPE bapimepoheader,
            wa_headerx      TYPE bapimepoheaderx,
            wa_poitem       TYPE bapimepoitem,
            wa_poitemx      TYPE bapimepoitemx,
            wa_poitem_sch   TYPE bapimeposchedule,
            wa_poitem_schx  TYPE bapimeposchedulx,
            wa_acct_***     TYPE bapimepoaccount,
            wa_acct_assx    TYPE bapimepoaccountx,
            wa_services     TYPE bapiesllc,
            wa_srvacc       TYPE bapiesklc,
            wa_return       TYPE bapiret2,
            ws_po           TYPE bapimepoheader-po_number.
      break gbpra8.
      wa_services-pckg_no = 10.
      wa_services-line_no = 1.
      wa_services-outl_no = '0'.
      wa_services-outl_ind = c_x.
      wa_services-subpckg_no = 20.
      APPEND wa_services TO i_services.
      wa_srvacc-pckg_no = 10.
      wa_srvacc-line_no = 1.
      wa_srvacc-serno_line = 01.
      wa_srvacc-serial_no = 01.
      wa_srvacc-percentage = 100.
      APPEND wa_srvacc TO i_srvacc.
      LOOP AT i_input_file INTO wa_input_file.
        IF wa_input_file-column2 EQ 'HD'.
          wa_header-doc_type = wa_input_file-column3.
          wa_header-creat_date = sy-datum.
          wa_header-created_by = sy-uname.
          wa_header-vendor = wa_input_file-column4.
          PERFORM conversion_output USING wa_header-vendor
                                    CHANGING wa_header-vendor.
          wa_header-comp_code = 'DE03'.
          wa_header-purch_org = 'DE03'.
          wa_header-pur_group = 'DE1'.
          wa_header-vper_start = wa_input_file-column9.
          wa_header-vper_end = wa_input_file-column10.
          wa_headerx-comp_code = c_x.
          wa_headerx-doc_type = c_x.
          wa_headerx-creat_date = c_x.
          wa_headerx-created_by = c_x.
          wa_headerx-vendor = c_x.
          wa_headerx-purch_org = c_x.
          wa_headerx-pur_group = c_x.
          wa_headerx-vper_start = c_x.
          wa_headerx-vper_end = c_x.
        ENDIF.
        IF wa_input_file-column2 EQ 'IT'.
          wa_poitem-po_item = wa_input_file-column3.
          wa_poitem-short_text = wa_input_file-column6.
          wa_poitem-plant = wa_input_file-column8.
          wa_poitem-quantity = '1'.
          wa_poitem-tax_code = 'V0'.
          wa_poitem-item_cat = 'D'.
          wa_poitem-acctasscat = 'K'.
          wa_poitem-matl_group = wa_input_file-column7.
          wa_poitem-pckg_no = '10'.
          APPEND wa_poitem TO i_poitem .
          wa_poitemx-po_item = wa_input_file-column3.
          wa_poitemx-po_itemx = c_x.
          wa_poitemx-short_text = c_x.
          wa_poitemx-plant = c_x.
          wa_poitemx-quantity = c_x.
          wa_poitemx-tax_code = c_x.
          wa_poitemx-item_cat = c_x.
          wa_poitemx-acctasscat = c_x.
          wa_poitemx-matl_group = c_x.
          wa_poitemx-pckg_no = c_x.
          APPEND wa_poitemx TO i_poitemx.
          wa_poitem_sch-po_item = wa_input_file-column3.
          wa_poitem_sch-delivery_date = sy-datum.
          APPEND wa_poitem_sch TO i_poitem_sch.
          wa_poitem_schx-po_item = wa_input_file-column3.
          wa_poitem_schx-po_itemx = c_x.
          wa_poitem_schx-delivery_date = c_x.
          APPEND wa_poitem_schx TO i_poitem_schx.
          wa_acct_***-po_item = 10.
          wa_acct_***-serial_no = 01.
          wa_acct_***-gl_account = '0006360100'.
          wa_acct_***-co_area  = '1000'.
          wa_acct_***-costcenter = 'KC010000'.
          APPEND wa_acct_*** TO i_acct_***.
          wa_acct_***-po_item = 10.
          wa_acct_***-serial_no = 02.
          wa_acct_***-gl_account = '0006360100'.
          wa_acct_***-co_area  = '1000'.
          wa_acct_***-costcenter = 'KC010000'.
          APPEND wa_acct_*** TO i_acct_***.
          wa_acct_assx-po_item = 10.
          wa_acct_assx-serial_no = 01.
          wa_acct_assx-po_itemx = c_x.
          wa_acct_assx-serial_nox = c_x.
          wa_acct_assx-gl_account = c_x.
          wa_acct_assx-co_area  = c_x.
          wa_acct_assx-costcenter = c_x.
          APPEND wa_acct_assx TO i_acct_assx.
          wa_acct_assx-po_item = 10.
          wa_acct_assx-serial_no = 02.
          wa_acct_assx-po_itemx = c_x.
          wa_acct_assx-serial_nox = c_x.
          wa_acct_assx-gl_account = c_x.
          wa_acct_assx-co_area  = c_x.
          wa_acct_assx-costcenter = c_x.
          APPEND wa_acct_assx TO i_acct_assx.
          wa_services-pckg_no = 20.
          wa_services-line_no = 2.
          wa_services-service = wa_input_file-column9.
          wa_services-quantity = '100'.
          wa_services-gr_price = '100'.
          wa_services-userf1_txt = wa_input_file-column13.
          APPEND wa_services TO i_services.
          wa_srvacc-pckg_no = 20.
          wa_srvacc-line_no = 1.
          wa_srvacc-serno_line = 02.
          wa_srvacc-serial_no = 02.
          wa_srvacc-percentage = 100.
          APPEND wa_srvacc TO i_srvacc.
        ENDIF.
      ENDLOOP.
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader                     = wa_header
          poheaderx                    = wa_headerx
      POADDRVENDOR                 =
      TESTRUN                      =
      MEMORY_UNCOMPLETE            =
      MEMORY_COMPLETE              =
      POEXPIMPHEADER               =
      POEXPIMPHEADERX              =
      VERSIONS                     =
      NO_MESSAGING                 =
      NO_MESSAGE_REQ               =
      NO_AUTHORITY                 =
      NO_PRICE_FROM_PO             =
       IMPORTING
         exppurchaseorder             = ws_po
      EXPHEADER                    =
      EXPPOEXPIMPHEADER            =
       TABLES
         return                       = i_return
         poitem                       = i_poitem
         poitemx                      = i_poitemx
      POADDRDELIVERY               =
         poschedule                   = i_poitem_sch
         poschedulex                  = i_poitem_schx
         poaccount                    = i_acct_***
      POACCOUNTPROFITSEGMENT       =
         poaccountx                   = i_acct_assx
      POCONDHEADER                 =
      POCONDHEADERX                =
      POCOND                       =
      POCONDX                      =
      POLIMITS                     =
      POCONTRACTLIMITS             =
         poservices                   = i_services
         posrvaccessvalues            = i_srvacc
      POSERVICESTEXT               =
      EXTENSIONIN                  =
      EXTENSIONOUT                 =
      POEXPIMPITEM                 =
      POEXPIMPITEMX                =
      POTEXTHEADER                 =
      POTEXTITEM                   =
      ALLVERSIONS                  =
      POPARTNER                    =
      break gbpra8.
      LOOP AT i_return INTO wa_return.
      ENDLOOP.
    ENDFORM.                    " split_data
    *&      Form  conversion_output
          Conversion exit input
    FORM conversion_output  USING    p_ip
                            CHANGING p_op.
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input  = p_ip
        IMPORTING
          output = p_op.
    ENDFORM.                    " conversion_output
    Suggest you to Search in <b>SDN with key - BAPI_PO_CREATE1</b>
    Will get few more useful related Posts.
    Reward points if this Helps.
    Manish

  • How to delete an operation from order using the bapi

    Can somebody please tell me how to delete an operation from order using the bapi
    BAPI_ALM_ORDER_MAINTAIN.
    Following was the test data for the BAPI.
    000000 OPERATION DELETE 0000040052810070
    000000 SAVE 0000040052810070
    Even I tried entering the operation table. The BAPI control ends fine, but when I check the order using IW32, the operation still exists.
    So, can you please tell me where Iam going wrong.

    Hi Subash Mohanvel,
    Check bapireturn parameter of the bapi BAPI_ALM_ORDER_MAINTAIN after execution of the code , and if there is no error message in the return table then call bapi_Transaction_commit.
    Unless you call this database saving of the records/values will not get reflected in the system.
    Hope that helps.
    Regards
    Kapadia
    ***Assigning points is the way to say thanks in SDN.***

  • How to use the BAPI_GOODSMVT_CREATE for Transfer posting Sales order

    Hi Friends,
    How to use the Bapi BAPI_GOODSMVT_CREATE for transfer posting sales order to sales order.
    pls, send the list of parameteres to pass to the bapi, if program avail please send it to me.
    Thanks in advance
    Shankar

    You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
    Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
          BATCH.
          MOVE_TYPE.
          ENTRY_QNT.
          MOVE_PLANT.
          MOVE_STLOC.
          MOVE_BATCH.
          MOVE_REAS
    these parameters.
    Regards,
    Sushil.

  • How to use the BAPI_VENDOR_CREATE

    Hi Experts,
    Could anyone explain me, how to use the BAPI, 'BAPI_VENDOR_CREATE' !
    Our requirement is to create vendors from the third party system say like 'BIZTALK' . Those people will be connecting to our SAP server through a custom RFC, which I have to create and in that RFC, I have to call this BAPI. since the BAPI, 'BAPI_VENDOR_CREATE' doesn't have any import parameters, I am unable to pass the Vendor numbers and other fields say like, 'COMPANY CODE, ACCOUNT GROUP, STREET etc.., ' , which are also needed by the time of creating vendors.
    Can anyone help me out, how to solve this issue!!! Or else is there any otherway of approaching this problem, also please let me know...
    Thanks in advance.
    SOMU.

    You have to pass Header and GM code as the INput parameters for uing this BAPI....GM code would be structure.
    Also you have to pass the INternal table Item for the goods mvt cxreate which will contains
          BATCH.
          MOVE_TYPE.
          ENTRY_QNT.
          MOVE_PLANT.
          MOVE_STLOC.
          MOVE_BATCH.
          MOVE_REAS
    these parameters.
    Regards,
    Sushil.

  • Create a Purchase order using the BAPI using the data in the XML file.

    Hello Gurus,
    here is the scenario can anyone help me how to proceed explaining the procedure?
    Create a Purchase order using the BAPI using the data in the XML file.
    comprehensive explanations are appreciated.
    thanks in advance.

    hi,
      first use fm "bapi_po_create".
      then use fm "BAPI_ACC_GL_POSTING_POST"
    The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
    •     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
    •     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
    •     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

  • How to use the functionality of Simulation for the Transaction MIRO

    Hi Group,
    I have a requirement to call SAP from MS Excel and check for the SImulation option as under:
    The Excel will pass the values of Invoice Number, Posting date, PO number, PO Item number, Company code and etc., through the call of BAPI   -   'BAPI_INCOMINGINVOICE_CREATE'  in order to create Invoice in the SAP system.
    But the above BAPI is creating the Invoices in SAP system. Rather, I need to just check(thru SIMULATION) the records and come back to MS Excel with the MIRO numbers that will be created and the errror messages that will be returned back.
    In summary, I have to add two Buttons as:
       POST : this has to create MIRO(invoice Numbers) in the SAP System(populating the Success/Error Messages by calling
                   the above BAPI   -  This functionality is working fine now
       SIMULATE: this has to do  same functionality of "POST" option but should not create MIROs in the SAP system
                          Currently I am not able to achieve this as the above BAPI is creating MIROs in SAP.
    Kindly provide your inputs on how to go about incorporating the above SIMULATION functionality, by giving some simulation BAPIs that can be used for my functionality.
    Thanks for your help in advance.
    Regards,
    Vishnu.

    Hi Group,
    In continuation to my previous posting, I would like to give more inputs as under:
    when I was using the BAPI - BAPI_INCOMINGINVOICE_CREATE (unless I commit the transaction), MIRO would not be created in the system.
    Now, when I run the BAPI again with a different set of data, the Invoice Number is getting incremented by one.... this I dont need, if the Invoice is not committed and if I run the next time, I need to get the same Invoice Number....
    How can I achieve this task?
    Kindly let me know your inputs on this.
    Regards,
    Vishnu.

  • How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

    Hi ,
      How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
      May i know what are the input parameters & fields mandatory
      for each Table structures ct_data , ct_datax , it_descript , it_longtext.
      Can any one explain me Step by Step Process.
      B'cos i tried with below code. Equipment is not getting created.
      wa_itab-equipment_ext = '000000000100000001'.
      wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
      wa_itab-text_language = 'EN'.
      wa_itab-sdescript     = 'Short Description'.
      APPEND wa_itab TO it_itab.
      CLEAR  wa_itab.
      LOOP AT it_itab INTO wa_itab.
        ct_data-ta_guid       = '000000000000000001'.
        ct_data-equipment_ext = wa_itab-equipment_ext.
        ct_data-descript      = wa_itab-descript     .
        ct_data-valid_date    = sy-datum.
        ct_data-equicatgry    = 'M'.
        APPEND ct_data.
        CLEAR  ct_data.
        ct_datax-ta_guid       = '000000000000000001'.
        ct_datax-equipment_ext = 'X'.
        ct_datax-equipment     = 'X'.
        APPEND ct_datax.
        CLEAR  ct_datax.
        it_descript-ta_guid       = '000000000000000001'.
        it_descript-text_language = wa_itab-text_language.
        it_descript-descript      = wa_itab-sdescript    .
        APPEND it_descript.
        CLEAR  it_descript.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'LTXT'.
        it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'bbbbbbbbbbbb'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'cccccccccccccccc'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      call BAPI-function in this system
        CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
          TABLES
            ct_data     = ct_data
            ct_datax    = ct_datax
            it_descript = it_descript
            it_longtext = it_longtext
            return      = return
          EXCEPTIONS
            OTHERS      = 1.
        IF sy-subrc = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          WRITE : 'Successful'.
        ENDIF.
        IF NOT return IS INITIAL.
          LOOP AT return.
            IF return-type = 'A' OR return-type = 'E'.
              WRITE : 'Error'.
            ENDIF.
          ENDLOOP.
        ENDIF.
        REFRESH  return.
      ENDLOOP.
    Regards
    SUrendar

    Hi ,
      How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
      May i know what are the input parameters & fields mandatory
      for each Table structures ct_data , ct_datax , it_descript , it_longtext.
      Can any one explain me Step by Step Process.
      B'cos i tried with below code. Equipment is not getting created.
      wa_itab-equipment_ext = '000000000100000001'.
      wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
      wa_itab-text_language = 'EN'.
      wa_itab-sdescript     = 'Short Description'.
      APPEND wa_itab TO it_itab.
      CLEAR  wa_itab.
      LOOP AT it_itab INTO wa_itab.
        ct_data-ta_guid       = '000000000000000001'.
        ct_data-equipment_ext = wa_itab-equipment_ext.
        ct_data-descript      = wa_itab-descript     .
        ct_data-valid_date    = sy-datum.
        ct_data-equicatgry    = 'M'.
        APPEND ct_data.
        CLEAR  ct_data.
        ct_datax-ta_guid       = '000000000000000001'.
        ct_datax-equipment_ext = 'X'.
        ct_datax-equipment     = 'X'.
        APPEND ct_datax.
        CLEAR  ct_datax.
        it_descript-ta_guid       = '000000000000000001'.
        it_descript-text_language = wa_itab-text_language.
        it_descript-descript      = wa_itab-sdescript    .
        APPEND it_descript.
        CLEAR  it_descript.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'LTXT'.
        it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'bbbbbbbbbbbb'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        it_longtext-ta_guid        = '000000000000000001'.
        it_longtext-text_language  = wa_itab-text_language.
        it_longtext-text_id        = 'INTV'.
        it_longtext-text_line      = 'cccccccccccccccc'.
        APPEND it_longtext.
        CLEAR  it_longtext.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
      call BAPI-function in this system
        CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
          TABLES
            ct_data     = ct_data
            ct_datax    = ct_datax
            it_descript = it_descript
            it_longtext = it_longtext
            return      = return
          EXCEPTIONS
            OTHERS      = 1.
        IF sy-subrc = 0.
          CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
          WRITE : 'Successful'.
        ENDIF.
        IF NOT return IS INITIAL.
          LOOP AT return.
            IF return-type = 'A' OR return-type = 'E'.
              WRITE : 'Error'.
            ENDIF.
          ENDLOOP.
        ENDIF.
        REFRESH  return.
      ENDLOOP.
    Regards
    SUrendar

  • Consuming an RFC Call Using the BAPI eWay

    Greetings all,
    We are trying to set up a scenario in which we have a custom RFC function that we are calling synchronously using the BAPI eWay. Here, an ABAP program calls an RFC which is like a proxy on the JCAPS server. On the JCAPS side, we are wanting to map the RFC onto a Web Service call and pass the results back as the exporting parameters of the RFC. While the examples demonstrate the use of an asynchronous function module such as IDOC_INBOUND_ASYNCHRONOUS, it is not clear to me how to work with synchronous calls. Any information would be greatly appreciated. Thanks.
    Best Regards,
    James Wood
    Bowdark Consulting, Inc.
    [email protected]

    I have a similar (if not identical) problem. Chris, your reply to James is talking about the process originating within JCaps. In my scenario (and it sounds like James' too), the process is originating from SAP. What I'm trying to do is this:
    SAP calls to my JCD - this is the part that I'm having trouble with
    My JCD does something with the data sent to it from SAP (call a database or whatever)
    The JCD responds back to SAP so that the request/reply cycle can complete and the SAP program has what it needs
    When I create an OTD object in JCaps using my RFC, there doesn't seem to be a way to make the JCD that I want to create use that OTD as a source for the input message.
    James, if I'm way off base here, let me know and I'll go get my own thread. :)
    Any help or direction would be appreciated. I've Googled this to death and have come up short.

  • How to use the cases in button action?

    Hi Experts,
    I want to get a prompt message if the field is empty.I got it but at the same time if the field is filled I want the other action to be performed that is to call a BAPI and give me output.How can I give two events for the same action.
    How to use the cases in button action?
    So, please guide me.Urgent need
    Regards
    Nutan

    Hi Nutan,
    if I understand you, then you have a simple validation. Therefore you can use the validation functionality of VC for your components. An alternative could be by writing a new ABAP RFC function module like:
    BAPI Input parameters as input and BAPI output parameters as output and an additional return code or string for a message:
    IF I_FIELD IS INITIAL.
      E_RETURN_CODE = "THE FIELD IS EMPTY."
    ELSE.
      CALL FUNCTION <YOUR_BAPI>
      <BAPI PARAMETERS>
    ENDIF.
    I hope that helps.
    Best Regards,
    Marcel

  • How to use the Function module 'BAPI_APPRAISAL_GETDETAIL'

    hello friends,
    I have to create the report which displays appraisee name, appraiser name,reviewer name and result.Using BAPI_APPRAISAL_GETDETAIL we can get the above all.But i don't know how to use the above function module.If anyone have  used in their program could you please send me or anyone have idea how to do that Please help.It is very Urgent Help me.
    Thanks in advance,
    Regards,
    Ashok.

    Hi,
    I do not hae the code but i can tell you how you use the FM and get the required data, please follow the below mentioned steps:
    1) In this Bapi you need to pass the Plan verison and Object Id data in the BAPI Import parameters and while passing the these values need to decalra the data variables same (of use the same reference fields as they are in Bapi import fields)as they are Bapi importing data fields.
    2) decalre the Internal Table structure as they are in the Export and Table parameters.
    3) Assign the decalred Import and Tables structures to the BAPI FM.
    4) once the Bapi is run with the Import parameters data the Apprisal data  and Apprisee data will returened in the import and table structures and also return value wll be imported.
    5) now using the Structures which are in Import and Table decalrations in the FM you can retrieve the data by reading them.
    Do let me know if you need any more details in this regard.
    Raghotham Reddy.
    If you find this is the right solution then allocate reward point.

  • Doubt about How to test the BAPI

    Hi Experts,
    I have one doubt. How to test one BAPI. I have BAPI_DOCUMENT_SAVEOBJECTLINKS
    I am using this BAPI to attach the document to the material. I opened se37 .Here how to test the BAPI wether the BAPI is Suitable to attach the document  or not. Please let me know . Its very urent.
    Helpful answers may be reward points
    Regards
    Khanna

    Hi,
    First you have to create a new document using CV01N tcode. Here leave the document field as blank, document type value can be choosen from F4 help and document part and document version can be given as 0. Press enter and add the necessary values and save. It will then create a new document. Using that document go to SE37 and execute the BAPI. In the BAPI also you need to give the document no that is generated, and document type, document part and document version of the newly generated document. In the OBJECTLINKS table of the BAPI give the material number and other details. Please see the function module documentation of this BAPI also.
    Please reward points if it helps.
    Regards
    Vimal

  • Open Purchase Order UPload Using the BAPI 's

    i need to upload the open Purchase Order using the BAPI function BAPI_PO_CREATE1., below is the given fileds blod are for Header, header will Repeat for the line items,can any one help me out  using the BAIP's for upload the PO, i need sample code for this ........
    Thanks & Regards
    Raghu
    <u>Field Name     Field Description                              Type     Length</u>
    <b>EBELN             Purchasing Document Number                         CHAR     010          X
    BUKRS             Company Code                                                     CHAR    004     MN10     C
    EKORG             Purchasing Organization                              CHAR     004     MN00     C
    EKGRP             Purchasing group                              CHAR     003          X
    BSART             Order type (Purchasing)                              CHAR     004          X
    LIFNR             Account Number of Vendor or Creditor                    CHAR     010          X
    BEDAT             Purchase Order Date                              DATS     010          X
    ZTERM             Terms of payment key                              CHAR     004          X
    WAERS             Currency Key                                   CUKY     005          X
    INCO1             Incoterms (part 1)                              CHAR     003          X
    INCO2             Incoterms (part 2)                              CHAR     028          X</b>
    EBELP             Item Number of Purchasing Document                    NUMC     005          X
    EMATN             Material number                                   CHAR     018          X
    WERKS             Plant                                        CHAR     004          X
    LGORT             Storage location                              CHAR     004          X
    EPSTP             Item category in purchasing document                    CHAR     001          X
    KNTTP             Account assignment category                         CHAR     001          X
    EINDT             Item delivery date                              DATS     010          X
    MENGE            "Purchase order quantity (direct input, transfer of POs)"     CHAR     013          X
    MEINS            Order unit                                   UNIT     003          X
    NETPR            "Net price: Document currency (direct input, transfer of"     CHAR     011          X
    PEINH            "Price unit (direct input, transfer of POs)"               CHAR     005          X
    BPRME            Order Price Unit (Purchasing)                         UNIT     003          X
    BPUMZ            Numerator: Conversion OPUn into OUn (direct input of POs          CHAR     005          X
    BPUMN            Denominator: Conversion OPUn into OUn (direct input of P          CHAR     005          X
    SAKTO            Cost element                                   CHAR     010          X
    KOSTL              Cost Center                                   CHAR     010          X
    VBELN          Sales and Distribution Document Number                    CHAR     010          X
    VBELP          Sales document item                              NUMC     006          X
    WEMPF          Goods recipient                                   CHAR     012          X
    WEBTH          "Amount in local currency (direct input, transfer of POs)"     CHAR     013          X
    WEBTF          "Amount in document currency (direct input, transfer of P"     CHAR     013          X
    WEREF          Flag for treatment of GR/IR (direct input of POs)          CHAR     001          X
    SPINF          Indicator: Update info record                         CHAR     001          X
    WEPOS          Goods Receipt Indicator                              CHAR     001          X
    REPOS          Invoice receipt indicator                         CHAR     001          X

    i need to upload the open Purchase Order using the BAPI function BAPI_PO_CREATE1., below is the given fileds blod are for Header, header will Repeat for the line items,can any one help me out  using the BAIP's for upload the PO, i need sample code for this ........
    Thanks & Regards
    Raghu
    <u>Field Name     Field Description                              Type     Length</u>
    <b>EBELN             Purchasing Document Number                         CHAR     010          X
    BUKRS             Company Code                                                     CHAR    004     MN10     C
    EKORG             Purchasing Organization                              CHAR     004     MN00     C
    EKGRP             Purchasing group                              CHAR     003          X
    BSART             Order type (Purchasing)                              CHAR     004          X
    LIFNR             Account Number of Vendor or Creditor                    CHAR     010          X
    BEDAT             Purchase Order Date                              DATS     010          X
    ZTERM             Terms of payment key                              CHAR     004          X
    WAERS             Currency Key                                   CUKY     005          X
    INCO1             Incoterms (part 1)                              CHAR     003          X
    INCO2             Incoterms (part 2)                              CHAR     028          X</b>
    EBELP             Item Number of Purchasing Document                    NUMC     005          X
    EMATN             Material number                                   CHAR     018          X
    WERKS             Plant                                        CHAR     004          X
    LGORT             Storage location                              CHAR     004          X
    EPSTP             Item category in purchasing document                    CHAR     001          X
    KNTTP             Account assignment category                         CHAR     001          X
    EINDT             Item delivery date                              DATS     010          X
    MENGE            "Purchase order quantity (direct input, transfer of POs)"     CHAR     013          X
    MEINS            Order unit                                   UNIT     003          X
    NETPR            "Net price: Document currency (direct input, transfer of"     CHAR     011          X
    PEINH            "Price unit (direct input, transfer of POs)"               CHAR     005          X
    BPRME            Order Price Unit (Purchasing)                         UNIT     003          X
    BPUMZ            Numerator: Conversion OPUn into OUn (direct input of POs          CHAR     005          X
    BPUMN            Denominator: Conversion OPUn into OUn (direct input of P          CHAR     005          X
    SAKTO            Cost element                                   CHAR     010          X
    KOSTL              Cost Center                                   CHAR     010          X
    VBELN          Sales and Distribution Document Number                    CHAR     010          X
    VBELP          Sales document item                              NUMC     006          X
    WEMPF          Goods recipient                                   CHAR     012          X
    WEBTH          "Amount in local currency (direct input, transfer of POs)"     CHAR     013          X
    WEBTF          "Amount in document currency (direct input, transfer of P"     CHAR     013          X
    WEREF          Flag for treatment of GR/IR (direct input of POs)          CHAR     001          X
    SPINF          Indicator: Update info record                         CHAR     001          X
    WEPOS          Goods Receipt Indicator                              CHAR     001          X
    REPOS          Invoice receipt indicator                         CHAR     001          X

  • How to use the same POWL query for multiple users

    Hello,
    I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
    "Query 'ABC' is already open in another session."
    where 'ABC' is the query name.
    Can you please tell me how to use the same POWL query for multiple users ?
    A fast reply would be highly appreciated.
    Thanks and Regards,
    Sandhya

    Batch processing usually involves using actions you have recorded.  In Action you can insert Path that can be used during processing documents.  Path have some size so you may want to only process document that have the same size.  Look in the Actions Palette fly-out menu for insert path.  It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

Maybe you are looking for

  • Why do web pages open slowly?

    Why does it often take so long for web pages to open?  The progress/address bar goes part way, then stops, and can take several minutes to finish loading the page.  Thoughts?

  • New iTunes Software

    I am having real problems with the NEW iTunes software. Not recognising my devices all three of them iPhone and two iPods, no buying from the Itunes store this Xmas then.. Also not loading up after closing down, I have waisted 2 hours of my life tryi

  • Is there a way to get the ImageReady Actions into PS CS4?

    Recently I made the jump from cs2 to cs4 and I miss ImageReady.  I know the animation in built into CS4 but what about the cool actions that i liked so much... zoom in, zoom out and the spinning and such.  Where can I find actions like to use in CS4

  • How do i transfer iphoto from Mac laptop to iMac?

    We have approx 7000 photos on our G4 powerbook. We have recently bought a brand new iMac OS X 10.5 and want to upload our old photo library to our new. We backed up our laptop iphoto library to external hard drive in Sept 07. So I connected the ext.

  • Xlock started with udev closes after 3 seconds

    Hi, I want to start xlock when I pull my USB key out. It works far enough to see xlock for 3 seconds or even a minute but then it allways dies without comment #cat /etc/udev/rules.d/50-unlock.rules SUBSYSTEM=="usb", ACTION=="remove", ENV{ID_VENDOR_ID