How to use the dynamical or static variable for ESSBASE cube name?

Hi Experts,
When I import ESSBASE Cube into physical layer, the cube name from ESSBASE is created automatically, such as H_Sales.
I want to use the the static or dynamical variable for replacing the external name. So I try to create the static variable in RPD,such as cubeName, and use the following code
'VALUEOF(cubeName)' into the textbox of external name.
However, when I view the report in answer, it will generate the error message: Database VALUEOF(cubeName) does not exist.
Is it possible to implement this functionality?
Thanks..

Hi,
use <%=odiRef.getSchemaName("D")%>
D as parameter if it is the Data Schema or W if you need the schema from Work Schema
Your command will be like:
select <%=odiRef.getSchemaName("D")%>.GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
Works?
Cezar Santos
http://odiexperts.com

Similar Messages

How to use the Dynamic Expression in BRFplus

Hi Experts
               I am new to BRFplus. Can you give any document on BRFplus how to use the Dynamic Expression.
Thankyou
Venkat

OK I tried it and worked but for one condition:
WHERE DECODE (E.qualification_sid, 1104,
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
But how to put two conditions for the same Expression:
WHERE DECODE ((E.qualification_sid, 1104) AND (E.RANK_SID, 8),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.spe_per)+1),
     (TO_DATE(E.RANK_DATE, 'DD-MM-RR')+(365*M.mili_yea_per)+1))
     BETWEEN TO_DATE('01-07-2011', 'DD-MM-RR') AND TO_DATE('31-07-2011', 'DD-MM-RR')
The previous code gives me this error: missing right parenthesis

How to use the Dynamic Configuration Bean

Hi experts,
im currently doing a file to mail scenario.
i want the name of the input file as the subject of the mail.
i want to establish this using the Dynamic Configuration bean
my first question is:
key.1 <b>read</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
this reads the value of the message ID into the attribute THeaderSUBJECT
but what does this do?
key.1 <b>write</b> http://sap.com/xi/XI/System/Mail THeaderSUBJECT
value.1 message.messageID
when i use this it has no effect atall.
my second question.
I have my input filename in the FileName attribute in Dynamic configuration how can i read it into THeaderSUBJECT attribute.
Appreciate any suggestions.

Hi Satish,
Yep i know its possible via an udf in Message mapping but i dont have an MM in my scenario. Since im not parsing thru the input data since its an excel file, so im transferring the file using the following method
/people/william.li/blog/2006/09/08/how-to-send-any-data-even-binary-through-xi-without-using-the-integration-repository
and in this method if i include an MM it will give me a mapping exception.
So i have to use this bean somehow and try to accomplish what we do in the udf.

How to use the Dynamic register of events in X-controls

Is it possible to handle dynamic events triggering using the X-control and if possible how to handle that option

Yes, it is tricky. I have an idea on the Idea Exchange suggesting that this behaviour is added to XControls - go and give kudos if you agree.
http://forums.ni.com/t5/LabVIEW-Idea-Exchange/Trigger-XControls-for-Dynamic-Events/idi-p/1411062

How to use the value of a variable to set another variable

Hello Experts,
Is it possible to access the value of variable set by the user and set the default value of another variable using the user entered value for the first variable? Example:
Date variable
Week variable
Month variable
User enters one of those and the other two are automatically prefilled with the correct values?
Thanks
Rado

Hi Rado,
Gothrough following code
Which reads year from user input and converts it to factory calendar week , following which you should able to convert user inputs to required parameters.
DATA: v_year1 TYPE i,
        v_int   TYPE i,
        v_week1 TYPE kweek,
        v_qurt TYPE i,
        v_perd TYPE /bi0/oifiscper,
        v_iweek TYPE i,
        v_periv TYPE periv VALUE 'Z4'.
DATA : v_vweeks TYPE /bi0/oicalweek,
        v_vperd   TYPE /bi0/oifiscper,
        v_vperiv TYPE /bi0/oifiscvarnt VALUE 'Z4'.
DATA : vit_weeks LIKE /bi0/scalweek OCCURS 0 WITH HEADER LINE.
DATA : v_perd1   TYPE umc_y_fiscper,
        v_weeks   TYPE umc_ys_dimvals,
        v_pweeks TYPE i.
CASE i_vnam.
   WHEN 'WPIYWEEK'.                "Variable name of char. in Bex
*Check for Step 2 (After user gives inputs on selection screen)
     CHECK i_step = c_after.                                "Step:2
     CLEAR : v_year1,
              v_week1,
              v_iweek.
*Read the value of variable which used has entered on sel. screen
     READ TABLE i_t_var_range INTO wa_var_range
                                 WITH KEY vnam = 'WPIFYEAR'.
     v_year1 = wa_var_range-low.
     CALL FUNCTION 'TIME_GET_LAST_WEEK'
       EXPORTING
         if_year     = v_year1
       IMPORTING
         ef_week     = v_week1
       EXCEPTIONS
         fatal_error = 1
         OTHERS      = 2.
     IF sy-subrc <> 0.
*           MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
*Get the no. of week from YYYYWW format
     v_iweek = v_week1+4(2).
     l_s_range-low = v_iweek.
     l_s_range-sign = c_include.
     l_s_range-opt = c_equal.
     APPEND l_s_range TO e_t_range. "This is the output structure in which u have to add the result
Endcase.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Where can I find out how to use the Journals feature in iPhoto for iPhone

I am new to Apple Support Communities. Not sure if this is the place that will help me work with Journals. Is there a manual or video which helps with teaching the features of the Journals application and how to use them? I am stuck knowing how to move around the images and changing the page set-up, among other perplexing features.

You need the iPhoto for iOS forum is here
https://discussions.apple.com/community/app_store/iphoto_for_ios
Regards
TD

How to use the program "Generate test data for BAI bank statement" ?

Hi all,
I use the program RFEBKAT5 to create an Electronic Bank Statement file in BAI format ,but it doesn't generate the file .
I don't know how to generate the file.
Please help me !
Thanks all !

You need to suitably adjust your GL accounts for "Posting Offset Account" (Whisch is defaulted as ++++++++19" and Checkout/Funds Out/Funds IN GL accounts to your configuration.
Once you do this try generating the file again.

How to use the first row function value for the rest of records

Hi all,
I am having a select statement like this. We are calling function enabled for each row. So it is taking
time. As per our bussiness logic, we can use what the function 'enabled' will give for the first row to
other rows also. so that we can avoid calling the function 'enabled' next row onwars.
Before
SELECT
decode(enabled(col1, col2, col3),'TRUE','xxx', col4),
decode(enabled(col1, col2, col3),'TRUE','xxx', col5),
decode(enabled(col1, col2, col3),'TRUE','xxx', col6),
decode(enabled(col1, col2, col3),'TRUE','xxx', col7),
decode(enabled(col1, col2, col3),'TRUE','xxx', col8),
from
table1 t1, table2 t2 where t1.col1 = t2.col1
After
SELECT
decode(enabled(col1, col2, col3),'TRUE','xxx', col4),
decode('true/false','TRUE','xxx', col5), --Here 'true/false' is the first row value after calling the function 'enabled'
decode('true/false','TRUE','xxx', col6),
decode('true/false','TRUE','xxx', col7),
decode('true/false','TRUE','xxx', col8),
from
table1 t1, table2 t2 where t1.col1 = t2.col1
Any thoughts on this, how to implement this logic
Thanks,
Pal

It's not clear where col1, col2, col3... etc. come from, so I've assumed they're in table1.
with table1_X as (select enabled(col1, col2, col3) as enbl
                        ,col1, col2, col3, col4, col5, col6, col7, col8
                  from   table1)
SELECT decode(t1.enbl,'TRUE','xxx', col4)
      ,decode(t1.enbl,'TRUE','xxx', col5)
      ,decode(t1.enbl,'TRUE','xxx', col6),
      ,decode(t1.enbl,'TRUE','xxx', col7),
      ,decode(t1.enbl,'TRUE','xxx', col8),
from   table1_x t1 join table2 t2 on (t1.col1 = t2.col1)p.s. you'd be better leaving out the enabled function altogether and incorporating the logic of the function directly in the SQL, and then you would be avoiding any context switching which will clearly impact performance on any large amount of data.
Edited by: BluShadow on 14-May-2013 08:26

How to use the songs in iPhone 6 for ringtone

Is it possible to use the songs in the phone for ringtone, how to set?

I got a iphone 6 yesterday and when I did my back up on iTunes my ring tones would not go back into my device I tried a few times and maybe is one of those bugs right now the iTunes store sell a lot of great music apps

How to use the same mask, stencil, etc., for multiple layers? Photoshop equivalent of masked group?

Hi I spent more than half an hour to search manual, forums, and Internet and still can't find the answer. Please help!
For example, in a comp with 5 or more layers I want to use the same mask or stencil or what ever can hide areas of the layers 2,3, and 4 but layer 5 and any other eventual layers below should not be affected.

Pre-compose the layers you want to mask and apply a track matte to the pre-comp using the mask. Think of pre-composing as an equivalent of creating a layer group.
Use Set Matte effect on each of the layers you want to mask. This is easiest to do if you apply set matte once and then create an animation preset to apply to the other layers. Just get set matte to do what you want it to do on the first layer, Select Set matte in the ECW or in the Timeline, then go to Animation>Save animation preset. Then select all of the other layers you want to apply the set matte to and apply the preset.
Put the mask at the bottom of the layers you want to mask and enable the preserve transparency switch, then nest this group in the composition with the other layers.
Here's another tip. You could define a custom color for all of the layers you want to use the matt on, then use the custom color for a group selection. This may make things easier down the line.

I have purchased the Adobe program that allows you to convert PDF documents. How do use the application?. Thanks for your help.

I have purchased the Adobe program that allows you to convert PDF documents but I can't figure out how to convert the PDF to a Word document. Does anyone know how the do this?
Thanks.
Andrew

Which of these things did you buy?
- ExportPDF
- PDF Pack
- Acrobat Standard
- Acrobat Pro
- Acrobat Plus

How to choose the characteristics and key figures for a cube

Hi Gurus,
To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?

To create a CO-PA cube, based on a DataSource, what chars and kfs should I select from std objects? I have the list of fields from the datasource, but how to interpret what infoobject/s are relevant for each io?
Hi,
For CO-PA since it is a generated DataSource, except for the common characteristics ( E.g. Company Code, Controlling Area ) where you get standard InfoObjects for all other Characteristics and Key Figures you end up creating custom or Z characteristics and key figures. This is unavoidable.
Assigning points is the only way of saying thanks in SDN
Thanks,
Shan.

How to use the method substituion in variable ODI

Hi folks,
I have a variable that run the follow query;
select GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
GER_LOT_EXEC_ODI is a function, and i need to pass the data shema name before this:
I'd like that stay this:
select data_shema_user.GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
I tryed with the follow method and not worked:
select <%=odiRef.getInfo( <"SRC_SCHEMA"> )%>.GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
Error log
900 : 42000 : java.sql.SQLException: ORA-00900: invalid SQL statement
java.sql.SQLException: ORA-00900: invalid SQL statement
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3026)
     at com.sunopsis.sql.SnpsQuery.executeQuery(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.execStdOrders(SnpSessTaskSqlV.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTaskTrt(SnpSessTaskSqlV.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlV.treatTask(SnpSessTaskSqlV.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.g.y(g.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Unknown Source)
what is wrong?
Thanks in advance
Bovolini

Hi,
use <%=odiRef.getSchemaName("D")%>
D as parameter if it is the Data Schema or W if you need the schema from Work Schema
Your command will be like:
select <%=odiRef.getSchemaName("D")%>.GER_LOT_EXEC_ODI('Fluxo', 1, 'C') FROM DUAL
Works?
Cezar Santos
http://odiexperts.com

How to use the scanner class to ask for a character?

Hey guys, this is my assignment:
Ask the user for a single letter and a sentence, and print out the
number of times that letter shows up in the sentence.
Please tell me how to scan for a character. I tried this:
import java.util.Scanner;
public class Frequencies
    public static final void main(String[] args)
        Scanner scanner = new Scanner(System.in);
        Scanner scan = new Scanner(System.in);
        System.out.println("Enter a sentence");
        String x = scanner.next();
        System.out.println("Enter a letter to look for");
        String y = scan.next();
        char z = y.charAt(0);
        int chara = 0;
        for(int i = 0; i<x.length(); i++){
                if(z==y.charAt(i)){
                        chara = chara++;
        System.out.println("There are " + chara + " " + z + "s in the sentence");
}and got the error after Running (not compiling):
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 1
        at java.lang.String.charAt(String.java:687)
        at Frequencies.main(Frequencies.java:16)I thought this meant that I was asking for the character in postition 1 of string y, but in my code I wrote position 0
when I tried inserting words in the character place (just to see what happened, not expecting functionallity, I got
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: [NUMBER OF CHARACTERS]
        at java.lang.String.charAt(String.java:687)
        at Frequencies.main(Frequencies.java:16)Please help.
The assignment isn't due nor graded, this is just killing me lol.
Thanks in advance
Edited by: Sevan on Oct 18, 2008 4:40 PM

jverd wrote:
Skydev2u wrote:
I've used this method for a while now and it gets the job done.
import java.util.Scanner;
public class ReadInput {
public static void main(String[] args) {
Scanner UserInput = new Scanner(System.in);
char letter = UserInput.findWithinHorizon(".", 0).charAt(0);
I know you're trying to help, but this isn't really doing it. It does nothing to address the source of the OP's problem. The way he's doing it now is almost right. He just needs to do a tiny bit of detective work to fix a small bug. Tossing off a totally different approach, with no explanation, is not particularly helpful.Your right jverd I skimmed the OP's problem too quick;y and in tern didn't understand it fully. After reading the post thoroughly I saw that the problem can be solved by taking the sentence the user enters and then converting it into a array of characters. Then searching for the specific letter the user enters is achieved by comparing it to each individual element of the char array. Then incrementing a counter variable each time a match is made. I hope this example code solve your problem.
* @author skydev
import java.util.Scanner;
public class SentenceReader {
    public static void main(String[] args) {
        int counter = 0; //Amount of time the letter appears in the sentence
        char letter;    //Letter the user search for
        char[] sentenceArray; //char array to hold the elements of the string the user inputs
        String sentence; //sentence the user inputs
        Scanner UserInput = new Scanner(System.in);
        System.out.println("Please enter a sentence! ");
        sentence = UserInput.nextLine();
        sentenceArray = sentence.toCharArray(); //splits up the users sentence into a array of char
        System.out.println("Please enter a letter to search for ");
        letter = UserInput.findWithinHorizon(".", 0).charAt(0);
         for(int i = 0; i < sentence.length(); i++){
                if(letter == sentenceArray){ //search to see if the letter of interest equals to each char (letter) of the array
counter++; //increments the amount of time the letter appears, set to 0 by default
System.out.println("The letter appeared " + counter + " times in the sentence"); //Displays the result :) I love programming

How to use the same external hard drive for OSX and XP

Hello to all. First off, thanks for all of the helpful comments that have been posted in the discussion board, they have helped me a lot with my problems and curiosities. My question has been touched on in the past, but nothing concrete so I figured I'd ask a bit more specifically.
I recently loaded Windows XP (FAT32)onto my MacBook. Everything is running smoothly, but I was just curious how I could format my external HD so that both operating systems can read it, i.e. I only have 20 GB's partitioned for Windows XP, and i'll be using it to download music and movies. I would like to be able to play these straight from my external rather than use up the disc space. Let me know if anybody can help! Thanks.

Unfortunately, Disk Utility doesn't just move everything around. It has to erase everything, and then resize. I find it a little odd, seeing as other disk utilities can resize everything just fine. Anyway, yes, you will have to erase your drive to reformat it as FAT32. What I usually do is try to copy everything from the drive to free space in the internal drives. I haven't had too much data on my drive yet, so I've been lucky so far. I don't know if you have enough free space on whatever drives you have, but that's probably the best way to do it.
1) Transfer everything over to a folder on the internal drive
2) Use Disk Utility to reformat the drive as FAT32
3) Transfer everything back to the external drive
2.0GHz MacBook 1st Gen Mac OS X (10.4.8) 2GB RAM

How to use the dynamical or static variable for ESSBASE cube name?

Similar Messages

Maybe you are looking for