How to use the Idoc number.(generated by prgram) and ALE

Hi All
I have a problem to use Idocs. I go thru the following steps but can not able to see the final output.
1.Create Segment ( WE31)
2.Create Idoc Type ( WE30 )
3.Create Message Type ( WE81 )
4.Assign Idoc Type to Message Type ( WE82 )
5.Make a report which gives us Idoc number.
Now my problem is where this Idoc number can we used .and how to relate this with ALE.
Regards
Manoj

Hi Manoj,
Use transaction code we02 or we05 to get the idoc no.
The table used are
EDIDC - Control record
EDID4 - Data record
EDIDS - Status record
Regards
Arun

Similar Messages

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

Searching Message ID in XI using the IDOC number produced in S1P

Hi Everyone,
I'm a sap XI newbee and i have a question.
The scenario is like this, We have a message ID (PO) that passes thru XI from a 3PLP(3rd party system) which eventually produces an IDOC when it reaches S1P(R/3).
Message flow: 3PLP - XI - S1P.
So in S1P(R/3)'s perspective, the IDOC is INBOUND and its supposed to display the message ID from XI in the DETAILS TAB (tCode:WE02) unfortunately it did not.
So how would I be able to find the message ID in XI using the IDOC produced in S1P.
I hope you get my point.
PS: tcode IDX5 wont work since the IDOC was only produced as soon as it reaches S1P(R/3).
Thank you so much,
XI Monitor

You have to search for the IDOC from IDX5 in your XI system...
Also please check the following OSS note : Note 1083694 - IDoc adapter: IDX5 and IDoc tracking
No object relationship is written in step 2.
No object relationship is displayed in the IDoc monitor (transaction WE02) in the receiver system.
Note that object relationships are written for logical systems only (partner type = "LS").
For more information, see Note 428344.
In transaction WENOLINKS, check whether the administrator has deactivated the object relationships.
If everything is maintained, you should see the Sender idoc number(PI) in BD87...
One of the roundabout ways till you fix the issues is to get the timestamp when IDOC was created and go to SXMB_MONI or IDX5 in PI for that timestamp to get the message id

How to obtain the IDOC number after creation

Hello everyone,
for our master data distribution via report RHALEINI (triggered via a custom report), we have some additional code in BAdI HRALE00OUTBOUND_IDOC, method IDOC_DATA_FOR_RECEIVER_MODIFY.
Everything is working fine so far. Now I need to know the Idoc number after it was created to store it in a customer table together with some additional data. Since the Idoc was not yet created when we're in the method mentioned above, I have to put my coding somewhere else.
Any that's exactly my question: Were could I put my coding? It needs to be executed after MASTER_DATA_DISTRIBUTE since this function creates the idoc in the database.
I though about the following:
- Since RHALEINI is called by a custom report, I might be able to read the idoc number from memory id COMM_HRMD_A (see RHALEINI, line 418).
- Maybe BAdI IDOC_DATA_INSERT could be used for this purpose?
What would be your approach for this?
Thank you in advance.

Hello Markus,
EXPORT comm_control TO MEMORY ID 'COMM_HRMD_A'.
This is a nice observation!
Since RHALEINI is called by a custom report, I might be able to read the idoc number from memory id COMM_HRMD_A
Are you SUBMIT'ting the report RHALEINI in the custom program? If yes, you can access the memory COMM_HRMD_A in your program. To verify this you can check in debug mode if the memory id is populated.
I've checked the report RHALEINI & the internal table comm_control should contain the idoc number!
Maybe BAdI IDOC_DATA_INSERT could be used for this purpose
Only if the previous approach doesn't work out. Remember [K.I.S.S|http://en.wikipedia.org/wiki/KISS_principle]
BR,
Suhas

How to use the validation work in Both TAB and Mouse keys in Forms6i

Hi,
I have a validation script once it's validated it should execute the query.But using When-Validate-Item i can't use execute_query.I am able to use the validation in Key-Next-Item trigger but if the user moves the cursor using mouse then it's not working.
How to use the validation script working in Both Scenarios(Tab and Mouse keys).
Can anyone please give inputs to rectify the above issue?.

So you have multiple fields, but on at least one of them if it's valid you immediately want to execute the query?
You could create a hidden field in a control block Query_Now default 'N'. In a WHEN-VALIDATE-ITEM on your item, if it's determined to be valid, then set Query_Now to 'Y'.
In a WHEN-NEW-ITEM-INSTANCE at block level, check if Query_Now is 'Y'. If it is then execute the query (and set it back to 'N').

How to use the (gigabit) ethernet for data exchange and WLAN for Internet?

I have following setup:
- MB Pro SL 10.6
- Desktop PC Windows 7
- Wireless Printer
- Netgear WLAN Router
At the moment all my data and internet communication is done via the WLAN router on 192.168.1.x That works fine and I can exchange data, print and surf the internet. My problem is that big data exchanges > 10GB take ages via my 54Mbit WLAN Connection. Furthermore the WLAN router is far away from the PC so that it is not possible to plug in the Ethernet Cable of the PC and the MB to the router.
Now I've thought that there must be a possibility to use a 1 gigabit (cross) cable (like in the 90s ;)) to connect the MB and the PC directly. I know that I will need different IP ranges and so on, but I have no clue how to do that.
The final solution should be that the setup stays as it is (data exchange, print, internet via WLAN) and that additional it is possible to connect PC and MAC some times for big transfers via a Gigabit ethernet cable. because I only want to connect those two machines I don't think that a switch makes any sense, or?
Does someone know how to do that?
Thanks a lot in advance!
Message was edited by: whitepowder

Well if it were 2 Macs, I would configure each Mac with a fixed IP address (same subnet as my router, but outside of the routers DHCP assignment range).
I would give the same fixed IP address to both my Airport AND my ethernet interfaces. I would do the same to the other Mac using another fixed IP address.
My network service order would have the ethernet higher than the Airport on both systems.
Normally I would use WiFi, so ethernet would be idle and out of the loop.
When I wanted faster transfers, I would connect each Mac to the router via their own ethernet cables, and the Mac would automatically detect that the ethernet became available, and would switch to use the faster ethernet. Since Airport and ethernet have the same fixed IP address, I could even do this in the middle of a file transfer and no one would notice as packets were always going to/from the same IP addresses, just using a different route, which doesn't matter.
NOTE: I've been doing this on Macs since Mac OS X 10.3 days (or was it 10.2; to long ago to remember).
However, you have thrown a Windows system into the mix, and since I do not use Windows, I do not have a clue about what can be done on Windows. However, maybe this will give you some ideas, and asking the right questions in a Windows oriented forum may provide the Windows side of this setup.
Sorry, that is the best I can do. Maybe my reply will encourage someone else to offer their approach.

How to use the column names generated from Dynamic SQL

Hi,
I have a problem with Dynamic SQL.
I have written an SQL which will dynamically generate the Select statement with from and where clause in it.
But that select statement when executed will get me hundreds of rows and i want to insert each row separately into one more table.
For that i have used a ref cursor to open and insert the table.
In the select list the column names will also be as follows: COLUMN1, COLUMN2, COLUMN3,....COLUMNn
Please find below the sample code:
TYPE ref_csr IS REF CURSOR;
insert_csr ref_csr;
v_select VARCHAR2 (4000) := NULL;
v_table VARCHAR2 (4000) := NULL;
v_where VARCHAR2 (4000) := NULL;
v_ins_tab VARCHAR2 (4000) := NULL;
v_insert VARCHAR2 (4000) := NULL;
v_ins_query VARCHAR2 (4000) := NULL;
OPEN insert_csr FOR CASE
WHEN v_where IS NOT NULL
THEN 'SELECT '
|| v_select
|| ' FROM '
|| v_table
|| v_where
|| ';'
ELSE 'SELECT ' || v_select || ' FROM ' || v_table || ';'
END;
LOOP
v_ins_query :=
'INSERT INTO '
|| v_ins_tab
|| '('
|| v_insert
|| ') VALUES ('
|| How to fetch the column names here
|| ');';
EXECUTE IMMEDIATE v_ins_query;
END LOOP;
Please help me out with the above problem.
Edited by: kumar0828 on Feb 7, 2013 10:40 PM
Edited by: kumar0828 on Feb 7, 2013 10:42 PM

>
I Built the statement as required but i need the column list because the first column value of each row should be inserted into one more table.
So i was asking how to fetch the column list in a ref cursor so that value can be inserted in one more table.
>
Then add a RETURNING INTO clause to the query to have Oracle return the first column values into a collection.
See the PL/SQL Language doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/returninginto_clause.htm#sthref2307

How to use the build file generated by Jdev to automate bpel deployment

Hi everyone I am trying to deploy bpel jar files and human task ear files using ant. When i use the ant which is generated by Jdev I am gettinng an error
C:\Documents and Settings\254876\Desktop\BPEL_ANT>ant
Buildfile: build.xml
deployTaskForm:
BUILD FAILED
C:\Documents and Settings\254876\Desktop\BPEL_ANT\build.xml:39: Could not create
task or type of type: deployTaskForm.
Ant could not find the task or a class this task relies upon.
This is common and has a number of causes; the usual
solutions are to read the manual pages then download and
install needed JAR files, or fix the build file:
- You have misspelt 'deployTaskForm'.
Fix: check your spelling.
- The task needs an external JAR file to execute
and this is not found at the right place in the classpath.
Fix: check the documentation for dependencies.
Fix: declare the task.
- The task is an Ant optional task and the JAR file and/or libraries
implementing the functionality were not found at the time you
yourself built your installation of Ant from the Ant sources.
Fix: Look in the ANT_HOME/lib for the 'ant-' JAR corresponding to the
task and make sure it contains more than merely a META-INF/MANIFEST.MF.
If all it contains is the manifest, then rebuild Ant with the needed
libraries present in ${ant.home}/lib/optional/ , or alternatively,
download a pre-built release version from apache.org
- The build file was written for a later version of Ant
Fix: upgrade to at least the latest release version of Ant
- The task is not an Ant core or optional task
and needs to be declared using <taskdef>.
- You are attempting to use a task defined using
<presetdef> or <macrodef> but have spelt wrong or not
defined it at the point of use
Remember that for JAR files to be visible to Ant tasks implemented
in ANT_HOME/lib, the files must be in the same directory or on the
classpath
Please neither file bug reports on this problem, nor email the
Ant mailing lists, until all of these causes have been explored,
as this is not an Ant bug.

Ensure JDEV and SOA versions are in sync.

How to: using the Place command in an action and remember the correct source filename...

I have a large set of product, architecture, and other subject-specific photos, that I’m preparing for a new website; all to be placed in various galleries.
For each photo, I want it to have the same background. If I were doing this manually, I would simply “place” the subject photo into the background, and save it – back to the original photo name.
In other words, doing this manually, PRODUCT_001.TIF gets placed into STANDARD_BKGRND.TIF, (thereby automatically correctly sizing and centering it), and then saving the result back to PRODUCT_001.TIF; either overwriting the original, or into a new folder. (I have the original file somewhere else, and am working with an intermediate copy).
But since I have several hundred photos, how do I create an action (and really – a droplet) that will save the resulting file to the desired name? Typically placing photo ‘PRODUCT_001’ into photo ‘B’, alters photo ‘STANDARD_BKGRND’, so I can’t save the result back to ‘PRODUCT_001’. Said differently, in a droplet, each time it's run saves the result back to the same filename 'STANDARD_BKGRND'.
The end result – I want to apply that droplet to all the PRODUCT_***.TIF files in a given folder, and end up with the same file names as before.
Thanks in advance for your help!
Jerry
PS - I have no scripting experience in PS, but have written code in other applications/scenarios.

Its great that your products are cutouts layers, Its easy to put cutouts on backgrounds and even add layer style to the product layer to enhance the composite. Still cutouts have size and resolution as do your background images.
When you make composites. A document that is place in or pasted into the current document will be resample to match the current documents DPI resolution to preserve the size of the document being place or pasted in size.
Additionally if your using place if the document being placed in does not fit within the current document's canvas size. Photoshop may scale the image to fit within the canvas. It depends on your user id Photoshop Preference setting.
That means you need you handle the sizes involved.
I would think that you would want the final composite to be the size of the background image.
You need to know its size and dpi resolution. You must use image size on your product image and make the image have the same dpi resolution and a size smaller then the background image. Perhas they have the same dip resolution as the background and are smaller in size. If that the cast their size are good no image resize is required,
Then you need to use canvas size to make the document have the same size and resolution as the background image.
You may want to center the product layer over the canvas however Canvas size will add canvas evenly around the produt layer's layer bounds when you leave the anchor point in the center.
When you then place in the background image it will not be resampled for it has the same dpi resolution as the current document and it will not be scaled for it is an exact canvas size fit. All that remains to be done is move the current placed layer below the product layer
The document name is the product image file name opened by you or by Photoshop automate batch process.

How To Use The Same Library - MacBook Pro's And Windows XP Pro?

Background: I have a fully configured MacBook Pro running OS X 10.8.3. Also, I run Windows XP Pro SP3 using Parallels Desktop. My primary iTunes Library and all content is stored on an external hard disk and the iTunes is "pointed" to that location by setting the iTunes' Preferences' Advanced Settings to the full path where the Library is located. Everything I have inside iTunes works perfect - the size if the Library is over 225GB!
BUT, when I install and use iTunes on my Windows XP Pro operating system (under Parallels), the contents of the Library SEEMS to work okay (while I'm in Windows) but the Windows' iTunes Library location in Preferences' Advance Tab is NOT THE SAME LOCATION AS IS THE MAC's LIBRARY LOCATION! It is not at the same location as my main/primary iTunes Library is "pointed to".
The problem occurs when I close Windows and return to the Mac OS X and then try to use my primary iTunes. All of the contents (and any content) within iTunes no longer work! When I attempt to play ANY song, movie, TV show, music video, audiobook, etc., a message pops up saying in effect "Location of 'x' can't be found, do you want to locate it?" I can then click 'yes' and navigate to the Library file that contains the song's file and it will then play fine, as it should. BUT, ONLY THAT SINGLE SONG WILL WORK - THE REMAINING 225GB STILL DON'T WORK!!!
So, I am forced to go into iTunes' Preferences' Advanced tab and click on "Change Location" then navigate to the proper library file (NOTE, THE LOCATION HAD BEEN CHANGED TO THE LOCATION FOR THE WINDOWS' LIBRARY LOCATION!!!)! Doing this corrects the primary iTunes functionality, but only after being forced to deleting the "iTunes Media Folder", quit iTunes, restart iTunes and Consolidate the Library - a whole bunch of steps and time to get back to "normal"!!!!!
Again, this all happens by going into Windows, opening its iTunes, then THAT triggers the entire scenario I've described above - EVERY TIME!
Thus, I avoid iTunes when I go into Windows, but I should NOT have to avoid using iTunes inside Windows! I hope I have described the problem/issues well enough that someone of you experts can provide a practical solution for me.
A potential remedy I've thought of is: Go into Windows' iTunes then go into its Preferences' Advance tab and change ITS location to be the exact same location as the primary Mac OS X's, click OK, then immediately close that iTunes.
          DOES THIS SOUND LIKE IT WILL WORK - I.e., USING THE EXACT SAME LIBRARY LOCATION FOR BOTH iTUNES?????
          IF THIS WOULD WORK, WHAT ELSE MUST I DO TO EITHER iTUNES OR TO BOTH iTUNES TO USE BOTH iTUNES
          USING THE SAME LIBRARY???
Thank you for any suggested solutions - VERY MUCH!
Larry

Note that sharing a folder between different OS that use different file paths is not recommended as some files can have an absolute path or other OS specific data.
You can click the Choose Folder button if you want to create or use a folder in a different location.<br />
Make sure to select an empty folder (you need to create this folder in advance) and not a folder that already has files as Firefox will use the specified location in this case.
*http://kb.mozillazine.org/Profile_Manager
You can also create a new profile via the command line.
*https://developer.mozilla.org/Command_Line_Options
You can consider to use Sync to sync the two profiles

How to use the Audigy 2 ZS DD5.1 and DTS decoder with PowerDV

Is there anyone having success with PowerDVD 6 output SPDIF and using the Audigy 2 ZS DD5. and DTS decoder decodes sound to a 5. analog speaker?
I am having problem with that setup, the sound is clobberred and out of sync or sometime dropped entirely.
Don't tell me to change PowerDVD to waveout instead of directsound, I needs directsound since that the only thing MCE2005 supports.
Thanks, Hien.

I think all AD_EXT "I/O's" are pure digital.
Pinout assigment table for Audigy 2 (maybe not : with ZS) can be found (for ex.) from DriverHeaven.
.jtpMessage Edited by jutapa on 08-3-2005 06:50 AM

How to use the ITS Theme generated by ITS Theme generator of Portal

Hi,
I have generated an ITS Theme using ITS Theme generator of Portal. I exported the theme . It is a zip file containg some xml files and two zip files - Portal and ITS. When I unzip ITS.ZIP I have webgui folder under which there is ma and sa.These folders have various images.
Now how do I apply the generated theme.
Regards,
Harish

Hi Edgar,
Thanks for responding. Yeah I looked at that documentation earlier and these are the activities we have done so far:
1. Using ITS theme generator in portal, generated ITS theme for our custom portal theme.
2. Verified from theme export that ITS.zip contains all relevant images, stylehsteets etc for our custom theme.
3. Even after this, when we preview transaction iViews from portal to execute a transaction on ECC system those iViews pick up default SAP theme but not our custom theme.
4. After looking at the OSS notes mentioned in help documentation, we used ~webTransactionType, ~design & ~designBaseUrl parameters in iView properties but no luck. Actually these parameters get ignored - even if we put invalid host name in designBaseUrl it doesn't throw any error.
We use EP 7.0 SP 17 and ECC 7.01 Ehp4 with integrated ITS. When we generated the theme using ITS theme generator in portal, we tried with service as webgui and also sap_generate but the iViews pick up only default SAP theme. How do we point ITS webgui and transaction iViews to custom portal theme?
Thanks for your help!
Veda

How to find the document number generated by F-53 Tcode.

Hi expert,
I am using user exit EXIT_XFMPR1_001, at this point I want to export document number, vendor number , vendor name, Vendor address, invoice number, invoice date, invoice amount, WHT, and net amount.
I get these, than I will transport it into text format file.
Thanks
Syed Tayab Shah

Hi,
What is ur requirement? why do you need to download/transfer to txt format?
Still want to do it? then try INDX table to export your contect.
And then read the table later...
If the hint is usefulu2026 Say thanks by rewardu2026.
Regards,
Prabhu Rajesh

How to: using the Place command in an action and remembering the source filename...

I have a large set of product, architecture, and other subject-specific photos, that I’m preparing for a new website; all to be placed in various galleries.
For each photo, I want it to have the same background. If I were doing this manually, I would simply “place” the subject photo into the background, and save it – back to the original photo name.
In other words, doing this manually, PRODUCT_001.TIF gets placed into STANDARD_BKGRND.TIF, (thereby automatically correctly sizing and centering it), and then saving the result back to PRODUCT_001.TIF; either overwriting the original, or into a new folder. (I have the original file somewhere else, and am working with an intermediate copy).
But since I have several hundred photos, how do I create an action (and really – a droplet) that will save the resulting file to the desired name? Typically placing photo ‘PRODUCT_001’ into photo ‘B’, alters photo ‘STANDARD_BKGRND’, so I can’t save the result back to ‘PRODUCT_001’. Said differently, in a droplet, each time it's run saves the result back to the same filename 'STANDARD_BKGRND'.
The end result – I want to apply that droplet to all the PRODUCT_***.TIF files in a given folder, and end up with the same file names as before.
Thanks in advance for your help!
Jerry
PS - I have no scripting experience in PS, but have written code in other applications/scenarios.

Actions don't have access to the document name (where the file name is). Scripts do, however.
If your products are sequentially numbered, you're in luck. You can overide the "Save as command" and make sure that your naming uses a sequence which you can set to the same starting number as your product. Here is an example of how to configure File -> Automate -> Batch (assume the set and action are your hand built one)
Instead of "Document name" you'd type "PRODUCT_" per your example and choose a 3 digit Serial number.
The "Starting Serial #" is where you can change if your products are numbered say, 101 and up.

How to track my stolen ipod only using the serial number

I had my iPod stolen from me sometime within the last week. I changed my iCloud password tonight & I was just wondering if there is any way I can track it using the serial number because I did not set up "find my iPhone" before it was stolen. It was not locked (the password when you first turn it on.) Please help me! I still have one year warranty on it too. Can anybody tell me how to go about fixing the problem? I have serial number if you can track it that way. Please get back to me with your responses asap . thx

No. The SN will only help idenitfy the iPod as yours if it is recovered.
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or continue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

How to use the Idoc number.(generated by prgram) and ALE

Similar Messages

Maybe you are looking for