How to use the integrated ITS server in WAS6.40 for WEBGUI
Hi,
I am testing the Portal 6.0SP6 on WAS6.40SP7.
Using User Mapping, I am able to connect and call some transaction to R/3 System (4.6c) and the ITS servers for the R/3 system. If I am going to use webgui to call a transaction, do I need the ITS server at all? The reason I asked because I thought WAS6.40 came with an embedded ITS server.
If I can make use of the integrated ITS server, how do I configure the system connection?
Thanks,
Edmond wong
I have read the past posts, but I am still not clear... We are implementing mySAP ERP 2004. This will include ECC 5.0 and EP 6.2.
We currently have R/3 4.6C and EP5.5. From EP 5.5 I have users executing R/3 transactions directly from EP using the standard Master iView. This traffic goes via the ITS virtual instance for the R/3 system.
I am trying to decide if I need to setup a separate ITS to continue to do what we do now OR if the direct call of a transaction from EP6.2 using the SAP supplied Master iView can be accomplished using the Internal ITS on ECC 5.0. We do not have the DEV systems set up so I cannot test.
Any comments?
Thanks,
Rich
Similar Messages
-
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use the integrated camera in Lenovo THINKPAD X301
Dear All,
I would like to know how to use the integrated camera for the THINKPAD X301 LAPTOP?
Please helpHi ,
For Lenovo product , we need application software to activate this camera. You can use the Picasa software which can search from Google to activate this camera.
After install Picasa > Picasa > Import > Select Device ( then choose your camera ) -
How to use the selection profile and status profile for production order?
Hi expert,
I want to know how to use the selection profile and status profile for production order. what's the usage for these two selection profile and status profile ?
Please help me.
thanks in advance.
george.shiHi George,
There are are two types of statuses.One is system status and second one is user status.These statuses will tell us current situation of an order.
We can't change system statuses.But we can create our own statuses through status profile.With this profile we can control user statuses.
In this status profile,
1.We define the sequence in which user statuses can be activated,
2.We define initial statuses
3. Allow or prohibit certain business transactions.
Selection profiles are used to select the objects (say production orders) with different status combinations.We assign status profiles to selection profiles in BS42 T-Code.
Regards,
Raja.
Edited by: Rajarao on Oct 30, 2008 6:21 AM
Edited by: Rajarao on Oct 30, 2008 6:22 AM -
Hi, I'm Hannah. I'm using a Mac. Can you show me how to use the options with F10, F11, F12 for turning the sound up, or down or mute? Thank you very much
Normally simply pressing them should do what you want, F10 to mute; F11 to decrease volume; F12 to increase volume. However, it's possible that you have a box ticked in Keyboard preferences which modifies the behaviour of the keys, requiring you to also hold down the Fn key (bottom left key on the keyboard) to enable the function.
Check System Preferences>Keyboard to makes sure the box indicated in the image isn't ticked. -
How to find the integrated ITS version
Hi All,
We have done the kernel upgrade in our environment. I have to find the ITS version as it is part of SAP kernel now.
Kindly suggest.
Regards,
Karthik.RHi Karthik,
Check the below link
http://wiki.scn.sap.com/wiki/display/HOME/ITS+FAQs
Also the note 366052 - ITS versioning
Additional comment about the 'SAP-integrated ITS' :
To determine the version of the ITS integrated into the SAP Web AS kernel, choose System -> Status in the SAP GUI. On the dialog window that then appears, choose Additional kernel information and you then receive the information about the used SAP kernel ("kernel release" and "patch level") in the following dialog window. This is the relevant information for the integrated ITS.
Regards,
Rajesh Kumar S -
How to use the update mechanism in Photoshop CS10 for Camera Raw?
Good Evenning!
I would like to open .NEF files with Adobe Photoshop CS10 (RAW for Nikon D5200) but my version of Camera Raw is too old.
I need at least the 7.3 version.
When I try to download it, I have this message: Please use the update mechanism in Photoshop CS10 for Camera Raw. But how?? When I go to "Help" tab, to "Updates", it says that no update available.
Can please someone help me?
Thanks a lot!!
Kinds Regards
VanessaWhich version of photoshop or photoshop elements are you using?
Which operating system?
There is no such version as cs10.
Do you mean photoshop shop elements 10?
If you go to Help>About Photoshop Elements (windows) or Photoshop Elements Editor>About Photoshop Elements (mac), that should tell you which version you have. -
How to increase the performance in server 2008 R2 for RDP users
Hi,
My application take to much time to load. If anyone double click on mail client the exe file will appear in task manager but it will open after 5 mins. how to increase the performance.
My sever configuration is as below,
SC2600 Intel motherboard with total 24 core processors and 32 GB RAM and 8 TB Hard Disk. RAID 5 is configured which has two lungs one is 167 GB for C drive and other is 4.5 TB for D drive.
There are 28 Thin-clients connected to server through L300 N computing Thin-clients.
Thin-clients connect to V-space server installed in server for RDP users to get connected.
we have installed around 20 applications including printer and scanner driver. And apps are has below,
Firefox browser, windows mail, Adobe acrobat XI, canon printer and scanner drivers, Epson printer and scanner driver, E scan anti-virus, office 2007, v space, power ISO, win-rar,Tally and e token drivers and some backup software's.
Below are the services and features enabled,
AD, File services, RDP, web server, Hyper-v, .net frame work.
Is there a way to increase the performance .
Very slow performance.Hi,
what would you suggest on hardware configuration must be for above mentioned applications and services with those many users.
how many cores and ram size is required. -
How to use the cell editor in FICO reports for YTD
HI experts,
I am working with BI7.0, in the below report, i have displayed result based on user input.but how to calculate the YTD values. User will give the input like 072007, results will be display one year from 072007 to 062006 (one yearback) and one more column is YTD
Report structure is :
user input(single value): 072007
AUG06....JAN07....JULY07....YTD
KEYFIGURE-1 453 -
777 -
232 -
777 (Only Jan07 value of Keyfigure-1)
KEYFIGURE-2 879 -
233 -
123 -
???? (only sum from Jan07 to July07)
KEYFIGURE-3 212 -
879 -
989 -
KEYFIGURE-4 234 -
656 -
788 -
KEYFIGURE-5 345 -
878 -
878 -
KEYFIGURE-6 767 -
767 -
323 -
KEYFIGURE-7 879 -
878 -
999 -
999 (Only last value of keyfigure-7 (July07)
in the above report, total 7 keyfigures so 7rows of YTD column
1) in the first YTD column, how will display only one value (keyfigure-1) of Jan07?
2) in the last YTD Column, how will display only one value (keyfigure-7) of July07?
3) from 2 to 6 columns of YTD, how will display the sum from Jan07 to July07?
Note: months will be changed based on user input(single Value)
how can use cell editor for above the senior.
if any option is availabel please let me know
Thanks
kishoreI think the following should work:
Context:
Rows (node,c=0:n)
--- rowIndex (integer)
selectedRowIndex (integer)
Bind the "selectedKey" property of the radio button (cell editor) to attribute "selectedRowIndex" (outside table data source node) and bind "keyToSelect" to attribute "Rows.rowIndex". Make sure that the "rowIndex" attribute will contain the index of the node element in node "Rows".
Armin -
How to use the region parameter of main report for subreport chart titles?
I am using Crystal Reports 11.
I create 1 main report with 10 sub-reports that contain cross-tabs & charts. The main report has a parameter regarding 3 different areas: region1, region2, and region3.
I use the method of adding the u2018regionu2019 parameter of main report to the selection formula of the sub-reports. So, I can select 'region' from main report to controll outputs in sub-reports by region.
I use formulas for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
Since I pass the u2018regionu2019 parameter of main report to sub-reports, I have to change chart titles dynamically based on the region I select.
How can I use the region parameter from main report in the formulas to get chart titles dynamically?
Thank you in advance.Thank you.
I am not using Chart Title with "Chart Expert".
I am using a formula for chart titles, e.g.:
Select {Product Code}
Case 'a111':
u2018Region1 u2013 a111 Counts'
Case u2018b222u2019:
u2018Region1 u2013 b222 Counts'
u2026
u2026
Default:
u2026
I drag this formula above the charts and it looks like a dynamic title. So, for product a111, the chart title would be "Region1 u2013 a111 Counts"; for product b222, the chart title would be "Region1 u2013 b222" Counts; and so on ...
Because I pass the region parameter from master report to subreport, I want to change the region part of the chart titles dynamically.
For example,
when select Region1, the chart titles should be: "Region1 u2013 a111 Counts"; "Region1 u2013 b222"; ...
when select Region2, the chart titles should be: "Region2 u2013 a111 Counts"; "Region2 u2013 b222"; ...
I want to add the region parameter into the tiltle formula.
How should I do? -
How to use the result of a sql query for a max () function
Hi
I wrote a query on which i wrote
"select max(id) from users "
how can i use the returned value.
if i made the var name ="userid"
can it be userid.rows[0] or what.
thnx for any helpHi!
The result of this query will be the max ID of users' IDs.
Let say we have:
String sql="select max(users.id) from users";
Statement st = ctx.conn.createStatement();
ResultSet rs = st.executeQuery(sql);
rs.next();
So you can get the max Id in the following way:
int maxId=rs.getInt("id");
Regards,
Rossi -
How to use the built-in camera and mic for commercial video conferencing
I would like to use the camera and microphone to join a commercial video conference - not iChat. How do I do that?
Hi
Dont know, you dont say which commercial video conference software is involved.
Tony -
How to configure the Integration Server Settins?
Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
MohanHi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV -
How to use the CMS functionality in Sun Portal Server 7.2
Hi All,
How to use the CMS functionality using the ccd.war(Portlet) which is available in the library as i could add it to my channel but not able to show the functionality as it is showing the error msg "You are currently not logged in. Please login." should I create userid and there respective roles inorder to use the CMS functionality.
Has any one used this as I could this in glass fish server.
Any Input is appreciated.
Thanks & regards
SrikanthHave a look at the "*Roles*" section of the portal server 7.2 content management system guide
http://docs.sun.com/source/820-4275/index.html . You can also look at [project mirage|https://mirage.dev.java.net] for some screencasts
Alternatively,
1. ccd.war has 3 portlets in it:
(a) custom content definition portlet
(b) custom content portlet
(c) workflow portlet
2. Inorder to work with these portlets, user needs to be in anyone of the below roles:
(a)Consumer (b) Editor (c) Approver (d) Administrator (e) Submitter (f) Contributor (g) Publisher
3. By default ccd.war gets deployed using a default roles file (/var/opt/SUNWportal/tmp/ccd.roles.properties)
Note: In windows, you may not find this file
4. Access the portlets as a user in any of the role mentioned in the ccd.roles.properties
(OR)
you can use a new roles file which has mapping to your custom roles. For this , undeploy existing ccd.war and deploy again with a new roles.properties file
Hope this helps! -
How to use the Variants in SAP Transportation and what is its use ?
Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
ShaktiHi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan
Maybe you are looking for
-
i thought i did but when i go to actualize the app it keeps asking me for his password cuase his apple id shows .... what should i do? do i reset it completly and lose all the muisic and pictures?
-
What is the Released date for IPhone 5?
What is the Released date for IPhone 5?
-
Dear All, To cancel a material Document I use MBST.... i enter the Mat. Doc number and the system generates a new document number for the cancellation doc.... My question is that where i can see the reference document which was actually cancelled..??
-
I can send iMessages but not send texts?
I don't know why but for some reason my phone will let me send iMessages but it won't let me send texts. Also, when I send an iMessage it uses my e-mail and not my number?
-
Can someone help please, not sure how to do..
hi everyone, could really do with some help on what steps i need to take in order to take my computer back to the start, im giving my mac to my sister and i dont want her to have any of the files/information on there and she doesnt want it either, ha