How To Use The Voice Command in Nokia 6300

Dear all
the voice command which saved on the Nokia 6300 is a computrized only i can't change it with my voice which return this option is useless to me so is there any other way to use this service using my real voice

No, on newer Nokia phone you can no longer recorded your own voice tags.
If you are having difficulty with the phone understanding your voice command please try to change the voice playback setting on the phone. Do the following :
Menu -> Settings -> Phone -> Language settings -> Voice playback language
Then select a language that the phone should use for playing back voice commands, you might want to select a language that closely resembles your accent and language.
Knowledge should be your Advisor when you need help.
1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

Similar Messages

Using the voice commands

Could someone please tell me how to use the "make this speakable" command? I don't get how to use it, or exactly what you can do with it.
PowerBook G4
<span<br>
PowerBook G4

Check Help->do a search for speakable.

How to use the telnet command line in Labview

Hi, someone can help me, I need to use a Telnet session in Labview but without using the http protocol, in this application I can only access the Telnet session using command line, here is an example of how I can access:
From my computer, click on Start, then Run and then type in CMD.
In the command line enter “telnet 192.168.0.1 5454” (without the quote marks) to bring up a blank DOS screen with a blinking cursor.
Type “AT” and press the ENTER key, you should receive an “OK” response.
Type in capital letters “AT+CMAR=1234” (without the quote marks)

I had a similar situation and here is what I did...
In MAX (Measurement and Automation eXplorer)
Select Devices and Interfaces
Select VISA TCP/IP Resources
Create a new resource
Select Manual Entry of Raw Socket
Enter the IP address and port (23 is the standard telnet port)
Give it a name. (VISA Ailas)
Now this "Device" will show up in the VISA drop down just like any other VISA device.
Use the VISA read and write just like you were communicating through a com port.
Since Telnet does not have a stop bit like serial, make sure you enable the termination character.
On your VISA reads set the number of characters to a big number, then VISA will read until it gets the termination character.
See my attached snippet of my Telnet read vi
Message Edited by RTSLVU on 06-16-2010 01:49 PM
Message Edited by RTSLVU on 06-16-2010 01:50 PM
Attachments:
telnet.png ‏40 KB
max1.png ‏33 KB
max2.png ‏31 KB

How to: using the Place command in an action and remembering the source filename...

I have a large set of product, architecture, and other subject-specific photos, that I’m preparing for a new website; all to be placed in various galleries.
For each photo, I want it to have the same background. If I were doing this manually, I would simply “place” the subject photo into the background, and save it – back to the original photo name.
In other words, doing this manually, PRODUCT_001.TIF gets placed into STANDARD_BKGRND.TIF, (thereby automatically correctly sizing and centering it), and then saving the result back to PRODUCT_001.TIF; either overwriting the original, or into a new folder. (I have the original file somewhere else, and am working with an intermediate copy).
But since I have several hundred photos, how do I create an action (and really – a droplet) that will save the resulting file to the desired name? Typically placing photo ‘PRODUCT_001’ into photo ‘B’, alters photo ‘STANDARD_BKGRND’, so I can’t save the result back to ‘PRODUCT_001’. Said differently, in a droplet, each time it's run saves the result back to the same filename 'STANDARD_BKGRND'.
The end result – I want to apply that droplet to all the PRODUCT_***.TIF files in a given folder, and end up with the same file names as before.
Thanks in advance for your help!
Jerry
PS - I have no scripting experience in PS, but have written code in other applications/scenarios.

Actions don't have access to the document name (where the file name is). Scripts do, however.
If your products are sequentially numbered, you're in luck. You can overide the "Save as command" and make sure that your naming uses a sequence which you can set to the same starting number as your product. Here is an example of how to configure File -> Automate -> Batch (assume the set and action are your hand built one)
Instead of "Document name" you'd type "PRODUCT_" per your example and choose a 3 digit Serial number.
The "Starting Serial #" is where you can change if your products are numbered say, 101 and up.

How to: using the Place command in an action and remember the correct source filename...

I have a large set of product, architecture, and other subject-specific photos, that I’m preparing for a new website; all to be placed in various galleries.
For each photo, I want it to have the same background. If I were doing this manually, I would simply “place” the subject photo into the background, and save it – back to the original photo name.
In other words, doing this manually, PRODUCT_001.TIF gets placed into STANDARD_BKGRND.TIF, (thereby automatically correctly sizing and centering it), and then saving the result back to PRODUCT_001.TIF; either overwriting the original, or into a new folder. (I have the original file somewhere else, and am working with an intermediate copy).
But since I have several hundred photos, how do I create an action (and really – a droplet) that will save the resulting file to the desired name? Typically placing photo ‘PRODUCT_001’ into photo ‘B’, alters photo ‘STANDARD_BKGRND’, so I can’t save the result back to ‘PRODUCT_001’. Said differently, in a droplet, each time it's run saves the result back to the same filename 'STANDARD_BKGRND'.
The end result – I want to apply that droplet to all the PRODUCT_***.TIF files in a given folder, and end up with the same file names as before.
Thanks in advance for your help!
Jerry
PS - I have no scripting experience in PS, but have written code in other applications/scenarios.

Its great that your products are cutouts layers, Its easy to put cutouts on backgrounds and even add layer style to the product layer to enhance the composite. Still cutouts have size and resolution as do your background images.
When you make composites. A document that is place in or pasted into the current document will be resample to match the current documents DPI resolution to preserve the size of the document being place or pasted in size.
Additionally if your using place if the document being placed in does not fit within the current document's canvas size. Photoshop may scale the image to fit within the canvas. It depends on your user id Photoshop Preference setting.
That means you need you handle the sizes involved.
I would think that you would want the final composite to be the size of the background image.
You need to know its size and dpi resolution. You must use image size on your product image and make the image have the same dpi resolution and a size smaller then the background image. Perhas they have the same dip resolution as the background and are smaller in size. If that the cast their size are good no image resize is required,
Then you need to use canvas size to make the document have the same size and resolution as the background image.
You may want to center the product layer over the canvas however Canvas size will add canvas evenly around the produt layer's layer bounds when you leave the anchor point in the center.
When you then place in the background image it will not be resampled for it has the same dpi resolution as the current document and it will not be scaled for it is an exact canvas size fit. All that remains to be done is move the current placed layer below the product layer
The document name is the product image file name opened by you or by Photoshop automate batch process.

How to use the SHELL command

I simply want to open NOTEPAD and automatically load a specified file for modification. I would like it to automatically become active (not minimized).
My code: 'Shell ("C:\WINDOWS\NOTEPAD.EXE", Fname)'. I also tried 'i =
Shell ("C:\WINDOWS\NOTEPAD.EXE", Fname)'.
Both ways produce the error "InvalidCastException".

Hello,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
I am moving your question to the moderator forum ("Where is the forum for..?"). The owner of the forum will direct you to a right forum.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

My daughter enabled the voice command and I can't get it off???????

Can any one tell me how to disable the voice command feature on the I touch?

It is called VoiceOver.
Try triple clicking the Home button. Then go to Settings>General>Accessibility and turn it off. You may have to use three fingers to scroll to get there. If difficulty see:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

How can I download to my pc a conversation recorded in my iPod Touch using the voice notes??

How can I download to my pc a conversation recorded in my iPod Touch using the voice notes????

From the Users Guyide:
Syncing Voice Memos
iTunes syncs voice memos to your iTunes library when you connect iPod touch to
your computer. This lets you listen to voice memos on your computer and provides a
backup if you delete them from iPod touch.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it
doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos
app until you delete them. If you delete a voice memo on iPod touch, it isn’t deleted
from the Voice Memos playlist in iTunes. However, if you delete a voice memo from
iTunes, it is deleted from iPod touch the next time you sync with iTunes.
You can sync the iTunes Voice Memos playlist to the Music app on iPod touch using
the Music pane in iTunes.
Sync the Voice Memos playlist to iPod touch:
1 Connect iPod touch to your computer.
2 In iTunes, select iPod touch in the Devices list.
3 Select Music at the top of the screen.
4 Select the “Include voice memos” checkbox and click Apply.
Some users have said that they had to first create a blank Voice Memos playlist for the memos to be synced to the computer.

When I'm using the Voice Memo for recording, it stops when a call or message comes in. How can I stop this?

I am trying to use the voice memo to record. I find that the recording stops when a call or text comes in even though I've 1- put the phone on silent, 2- Put it in Do Not Disturb mode, 3- taken all apps out of the Notification Center.
Does anyone have any information on how to use this app more efficiently?

putting the device in airplane mode will send all the calls to voicemail and you shouldnt get any texts until you turn the feature off

How to use the DISPLAY RECORD Setup Command in an etext file?

Hi All,
How to use the DISPLAY RECORD Setup Command in an etext file?
I want to display a <NEW RECORD> conditionally. The condition will be based on the data coming through from the xml file.
Please help me with an example. The BI User guide also doesnt show any examples.
Your help is appreciated.
Rgds,
Kiran Panditi

Hi,
You can use vb coding in BEx Analyser to calculate your unit price. For this you have to first display the attributes of your object "XYZ". Then you can use VB cosing to calculate the value for the unit price field.
One more thing cna you clarify whether is it display attribute or variable ?
Regards,
Balajee

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed. Why?   I've seen demonstrations on how to use the feature but mine doesn't wo

I am using Photoshop CC2014 15.00. In the pop-up menu for the Fill command there is a place for Scripted patterns. Within that part, the tree and the picture frame are grayed.
Why?   I've seen demonstrations on how to use the feature but mine doesn't work. I checked the updates and I have the current version.
Thanks.      LM

I am running CC 2014.2.1 and I've updated to Yosemite. Not seeing tree or frame as an option in the menu. Coworker still on Mavericks has it.

I am visually impared and use the voice over feature. Somehow the screen curtain" has been turned ON and I cannot find out how to disable it withouut turning voice over OFF. I'm really in the dark now.

I am visually impared and use the voice over feature. Somehow the screen curtain" has been turned ON and I cannot find out how to disable it withouut turning voice over OFF. I'm really in the dark now.
Thanks in advance for any helpposted.

How to reset iPod
iPod Troubleshooting Assistant
Finding the "Five Rs" of iPod troubleshooting
iPod troubleshooting basics and service FAQ

How do I use the 'mv' command??

I want to move some scripts file into my /User/Local/Bin/
folder but i cant i get
usage: mv [-f | -i | -n] [-v] source target
mv [-f | -i | -n] [-v] source ... directory
and i dont know what else to do because i really need to move the files.
So far this is the way im doing it
sudo mv encode-handheld-5.2.pl /User/Local/Bin/
And when I do that I get this message...
mv: rename encode-handheld-5.2.pl to /User/Local/Bin/: No such file or directory
How do I use the mv command or how am i supposed to mv those files.??
Help Please!

You are still not providing the path to the file you're moving. Did you read my earlier response? Are you sure this file is in the current working directory? Try the "ls" command (that's lowercase "LS"). Do you see that file? If not, follow my earlier directions.
As to whether the /usr/local/bin directory exists, it should, but you can check with:
ls -al /usr/local/bin
If you get an error, the directory does not exist for some reason, which means your system is in an uncertain state.
BTW, meaning no offense, if you don't know all this stuff, you should be very, very cautious when using the Terminal. It is a very dangerous place to those who don't have some idea what they're doing. You can irreparably damage your system (requiring a reinstall) and even destroy your data with very minor typos.

How to use the "-R" option in the command zoneadm?

Please explain in detail, thanks!

The "-R" option is there to allow to manipulate zones in an alternate Boot Environment (BE). The parameter that you should use is the mount point of the alternate BE.
Mount the alternate BE in a separate directory with beadm command and then you can use the zoneadm command with this option.

How To Use The Voice Command in Nokia 6300

Similar Messages

Maybe you are looking for