How to Use Tree Structure in Forms (Expand & Collpse)
Hi ,
I need a logic to develop a Custom form which using tree structure fuctionality.It's like same in Indented Bills form (Module Bills of Material).
I have to use the symbol '+' and '-' in column called item_number ( if it has sub componentes, using that symbol i may explode or collopse).
I gone through the base form for that(indented Bill form(Form Name:BOMFQBIN, using BOMFMSTR library function to create Tree Structure)
but i colud not understand the logic.
If any one clarify me then it's fine
Thanks,
Sri
see this thread
Re: Forms 60 Heirarchical Tree..Need Help
Similar Messages
-
How to populate Tree structure from BAPI while tree grows or shrinks
Hi All
Currently I am populating the tree structure from BAPI based on the HLevel (Hierarchy Level) parameter, but when ever insertion and deletion happens in the tree at any level in the UI and at the same time i am updating these tree node values with HLevel value(example : 1 is first level , 2 is second level, 3 is third level etc) updating successfully& correctly into the BAPI, no issues.
Once it is updated into the BAPI, next time when i refreshed the UI then i am not populating the tree structure correctly from BAPI with updated new nodes based on the HLevel. when tree struture grows or shrinks in the BAPI after updating into BAPI from UI then i am not populating the tree sturcture correctly based on the HLevel value from the BAPI.
Please let me know any sample code how to populate tree structure correctly when tree structure grows or shrinks based on the HLevel value ( Hierarchy Level , for example : 1 is level , 2 is 2nd level , 3 is third level nodes etc)
anybody helps in this regard with sample code on the populating tree tructure then it would be great help to me.
Thanks in advance
Regards
Kalki Reddy
Edited by: KalkiReddy on Nov 29, 2009 3:48 PMBapi output node:
Value | Text | HLevel
01 | A | 1
0101 | AA | 2
010101 | AAA | 3
01010B | AAB | 3
0102 | AB | 2
02 | B | 1
0201 | BA | 2
This code is used to build the tree in wdDoInit method
IE_T_CatalogueNode catalogueNode = wdContext.nodeE_T_Catalogue();
int size = catalogueNode.size();
ICatalogoElement level1elem = null;
for (int i = 0; i < size; i ++)
IE_T_CatalogueElement catalogueElem = catalogueNode.getE_T_CatalogueElementAt(i);
if (catalogueElem.getLevel().equals("1"))
// 1 Livello
level1elem = wdContext.createCatalogoElement();
level1elem.setKATALOGART_CODE(catalogueElem.getKatalogart());
level1elem.setCODEGRUPPE_CODE(catalogueElem.getCodegruppe());
level1elem.setCODE(catalogueElem.getCode());
level1elem.setCODE_DESCR(catalogueElem.getKatalogart_Descr());
level1elem.setDESCR(catalogueElem.getKatalogart_Descr());
wdContext.nodeCatalogo().addElement(level1elem);
for (int j = i + 1; j < size; j ++)
IE_T_CatalogueElement catalogueElem2level =
catalogueNode.getE_T_CatalogueElementAt( j );
String level2 = catalogueElem2level.getLevel();
if (level2.equals("2"))
ICatalogoElement level2elem = level1elem.nodeChild().createCatalogoElement();
level2elem.setKATALOGART_CODE(catalogueElem2level.getKatalogart());
level2elem.setCODEGRUPPE_CODE(catalogueElem2level.getCodegruppe());
level2elem.setCODE(catalogueElem2level.getCode());
level2elem.setCODE_DESCR(catalogueElem2level.getCodegruppe_Descr());
level2elem.setDESCR(catalogueElem2level.getCodegruppe_Descr());
level1elem.nodeChild().addElement(level2elem);
for (int k = j + 1; k < size; k ++)
IE_T_CatalogueElement catalogueElem3level =
catalogueNode.getE_T_CatalogueElementAt( k );
String level3 = catalogueElem3level.getLevel();
if (level3.equals("3"))
ICatalogoElement level3elem = level2elem.nodeChild().createCatalogoElement();
level3elem.setKATALOGART_CODE(catalogueElem3level.getKatalogart());
level3elem.setCODEGRUPPE_CODE(catalogueElem3level.getCodegruppe());
level3elem.setCODE(catalogueElem3level.getCode());
level3elem.setCODE_DESCR(catalogueElem3level.getCode_Descr());
level3elem.setDESCR(catalogueElem3level.getCode_Descr());
level2elem.nodeChild().addElement(level3elem);
Damiano -
How to use the structure in the EXIT_SAPMM06E_013 function module
Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.SreyamshCan you please elaborate little bit more what is the actual requirement?
-
How to declare custom structure in form interface in smartforms?
Hi,
How to declare custom structure in form interface in smartforms?
Thanks.Create a structure in SE11 and use that in Form Interface - > Tables tab in smartforms.
Pranav -
In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012In SQL Server Reporting Services (SSRS), drill-down is an action we can apply to any report item to hide and show other report items. They all are ways that we can organize and display data to help our users understand our report better. In this article,
we are talking about how to use parameter to control the Expand/Collapse drill-down options in SSRS report.
Consider that the report has a dataset (dsSales) with following fields: SalesTerritoryGroup, SalesTerritoryCountry, CalendarYear, SalesAmount.
1. The report has the following group settings:
Parent Group: SalesTerritoryGroup
Child Group: SalesTerritoryCountry
Child Group: CalendarYear
Details: SalesAmount
2. Add three parameters in the report:
GroupExpand:
Available Values: “Specify values”
Label: Yes Value: Yes
Label: No Value: No
Default Values: “Specify values”
Value: Yes
CountryExpand:
Available Values: “Specify values”
Label: Yes Value: =IIF(Parameters!GroupExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No","No","Yes")
YearExpand:
Available Values: “Specify values”
Label: Yes
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No",Nothing,"Yes")
Label: No Value: No
Default Values: “Specify values”
Value: =IIF(Parameters!GroupExpand.Value="No" or Parameters!CountryExpand.Value="No","No","Yes")
3. Right click SalesTerritoryCountry icon in the Row Groups dialog box, select Group Properties.
4. Click Visibility in the left pane. Select “Show or hide based on an expression” and type with following expression:
=IIF(Parameters!GroupExpand.Value="Yes", False, True)
Select “Display can be toggled by this report item” option, and select “SalesTerritoryGroup” in the drop down list.
5. Use the same method setting CalendarYear, (Details) drill-down with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", False, True)
=IIF(Parameters!YearExpand.Value="Yes", False, True)
6. Click SalesTerritoryGroup text box in the tablix. Select InitialToggleState property in the Properties dialog box, and type following expression:
=IIF(Parameters!GroupExpand.Value="Yes", True, False)
7. Use the same method setting SalesTerritoryCountry, CalendarYear text box with following expression:
=IIF(Parameters!CountryExpand.Value="Yes", True, False)
=IIF(Parameters!YearExpand.Value="Yes", True, False)
After that, when we preview the report, we can use these three parameters to expand/collapse drill-down.
Note:
In our test, we may meet following issue. We can check the expression of InitialToggleState property to troubleshooting the issue.
Applies to
Reporting Services 2008
Reporting Services 2008 R2
Reporting Services 2012 -
How to use "Reference Structure" setting in analysis grid item
Hello expert,
in Bex analyzer, how to use "Reference Structure" setting in analysis grid item by example?
Many thanks,The variable needs assigned a value, that's why you're getting prompted. When you execute the statement, it's not executing the variable and exec lines.
Having script output available in a grid would be an enhancement request. -
How to use css in oracle forms
Hello, I am using oracle forms 11g with weblogic server 10.3.5 at windows 7.I have to use CSS in oracle forms.i have tried to search it but no profit.please some one else tell me that how can use css in oracle forms. Thnak You regards aaditya
Hi
As Francois pointed out Oracle forms has nothing to do with html based technology. The way you can get the equivalent effect of creating consistancy in the way your objects are displayed is by creating a set of items you want and alter their apperance and behaviour and place them into object libraries (one library should do the trick). From there you subclass all of you forms items off these libraries.
Regards
Quintin -
How to use a structure at run time....
Hi gurus,
I am confused on how to use the structure in our report..why do we need it...Please help me with that...
Thanks
Cheers:JimOr you could simply use a structure in your program to group like fields together. So that you could maybe clear them all at one shot.
For example, say that you have a structure with fields a - z.
data: begin of structure,
fielda type c,
fieldb type c,
fieldc type c,
fieldz type c,
end of structure.
So in your program, it is now important for you to clear these fields, if you would have defined them one by one without the structure, you would have to list them all in your CLEAR statement, but instead, since you have them in a structure, you can some say.... CLEAR STRUCTURE.
Regards,
Rich Heilman -
How to use event structure of event data nodes event filter nodes in programming
hi,
I need manual of how to use 'event structure' events of 'event data nodes' and 'event data filters'...please help me....
Regards
RavindranathI'm not really sure what you are looking for here. Did you do a search in the LabVIEW help for Event Structure?
The Event Data Node just returns information about the event, like control data, control reference, what caused the event, etc.
The Event Data Filters are just used in Filter Events. This allows you to discard an event or change the data that the event will recieve.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
How to handle Tree structure in bdc
Hi Experts,
How to handle Tree structure in bdc, can any one have any idea regarding this.
In the top most of the tree i have : Occupational Health under that Identification is there .
Occupational Health
Identification
Regards,
Sudhakar Reddy.AHi Experts,
Thanks Parvatha reddy for your reply.
Can any one provide BAPI for this T.Code EHSQCATOH or can any one tell me how to handle Tree structure .
Regards,
Sudhakar Reddy .A -
How to develop tree structure using webdynpro
hi everybody,
I want to develop a sample tree structure for an object in webdynpro.can u help how to develop that one.Hi Srinivas,
Here are links...
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47ce9b90-0201-0010-59b5-f70826824eee
http://help.sap.com/saphelp_nw04/helpdata/en/33/af0abb4559424dad802cbc7e31eaf2/content.htm
Hope it helps.
Regards,
Maheswaran.B
Message was edited by:
Maheswaran B -
How to create tree structure in abap
hi,
I am mohan. Please send the how to create the tree structure. how to insert the child nodes in root node. actually our requirement is we have list transaction codes. We are planning to put all transaction codes in tree level.
please tell me how to do the program in tree structure.Hi Mohan,
Check the following program on ALV tree.
REPORT zalvtree.
CLASS cl_gui_column_tree DEFINITION LOAD.
CLASS cl_gui_cfw DEFINITION LOAD.
DATA: go_grid TYPE REF TO cl_gui_alv_grid.
DATA: ro_grid TYPE REF TO cl_gui_alv_grid.
DATA tree1 TYPE REF TO cl_gui_alv_tree.
DATA mr_toolbar TYPE REF TO cl_gui_toolbar.
DATA : gt_checked TYPE lvc_t_chit,
gs_checked LIKE LINE OF gt_checked,
l_part_key TYPE lvc_nkey,
gt_node TYPE lvc_s_chit-nodekey.
INCLUDE <icon>.
INCLUDE zamit_alv_tree_toolbar_event.
INCLUDE zbcalv_tree_event_receiver.
*DATA: toolbar_event_receiver TYPE REF TO lcl_toolbar_event_receiver.
DATA: gt_sflight TYPE sflight OCCURS 0, "Output-Table
gt_fieldcatalog TYPE lvc_t_fcat, "Fieldcatalog
ok_code LIKE sy-ucomm. "OK-Code
START-OF-SELECTION.
END-OF-SELECTION.
CALL SCREEN 100.
*& Module PBO OUTPUT
process before output
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF tree1 IS INITIAL.
PERFORM init_tree.
else.
CALL METHOD me->refresh_table_display
EXCEPTIONS
PROGRAM_ERROR = 1
others = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " PBO OUTPUT
*& Module PAI INPUT
process after input
MODULE pai INPUT.
CASE ok_code.
WHEN 'EXIT' OR 'BACK' OR 'CANC'.
PERFORM exit_program.
*mrk
WHEN 'MOVE'.
PERFORM check_selection.
WHEN 'MBAK'.
PERFORM another_selection.
WHEN 'ALL'.
PERFORM select_all.
WHEN 'CLEAR'.
PERFORM clear_all.
WHEN 'DELETE'.
PERFORM delete_all.
WHEN 'EXPAND'.
PERFORM expand_all.
WHEN 'COLLAPSE'.
PERFORM collapse_all.
WHEN OTHERS.
CALL METHOD cl_gui_cfw=>dispatch.
ENDCASE.
CLEAR ok_code.
CALL METHOD cl_gui_cfw=>flush.
ENDMODULE. " PAI INPUT
*& Form build_fieldcatalog
build fieldcatalog for structure sflight
FORM build_fieldcatalog.
get fieldcatalog
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = gt_fieldcatalog.
change fieldcatalog
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
LOOP AT gt_fieldcatalog INTO ls_fieldcatalog.
CASE ls_fieldcatalog-fieldname.
WHEN 'CARRID' OR 'CONNID' OR 'FLDATE'.
ls_fieldcatalog-no_out = 'X'.
ls_fieldcatalog-key = ''.
WHEN 'PRICE' OR 'SEATSOCC' OR 'SEATSMAX' OR 'PAYMENTSUM'.
ls_fieldcatalog-do_sum = 'X'.
ENDCASE.
MODIFY gt_fieldcatalog FROM ls_fieldcatalog.
ENDLOOP.
ENDFORM. " build_fieldcatalog
*& Form build_hierarchy_header
build hierarchy-header-information
-->P_L_HIERARCHY_HEADER strucxture for hierarchy-header
FORM build_hierarchy_header CHANGING
p_hierarchy_header TYPE treev_hhdr.
p_hierarchy_header-heading = 'Hierarchy Header'. "#EC NOTEXT
p_hierarchy_header-tooltip =
'This is the Hierarchy Header !'. "#EC NOTEXT
p_hierarchy_header-width = 30.
p_hierarchy_header-width_pix = ''.
ENDFORM. " build_hierarchy_header
*& Form exit_program
free object and leave program
FORM exit_program.
CALL METHOD tree1->free.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form check_selection
text
--> p1 text
<-- p2 text
FORM check_selection .
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container2 TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE2'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container2
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
CREATE OBJECT go_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = l_custom_container2
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM load_data_into_grid.
*data: lt_nodes type LVC_T_NKEY,
ls_nodes like line of lt_nodes,
ls_checked like line of gt_checked.
*loop at gt_checked into ls_checked.
ls_nodes = ls_checked-nodekey.
append ls_nodes to lt_nodes.
*endloop.
*CALL METHOD tree1->unselect_nodes
EXPORTING
it_node_key = lt_nodes
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
DP_ERROR = 2
MULTIPLE_NODE_SELECTION_ONLY = 3
ERROR_IN_NODE_KEY_TABLE = 4
FAILED = 5
others = 6
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
ENDFORM. " check_selection
*& Form another_selection
text
--> p1 text
<-- p2 text
FORM another_selection .
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container2 TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE2'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container2
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
CREATE OBJECT ro_grid
EXPORTING
I_SHELLSTYLE = 0
I_LIFETIME =
i_parent = l_custom_container2
I_APPL_EVENTS = space
I_PARENTDBG =
I_APPLOGPARENT =
I_GRAPHICSPARENT =
I_NAME =
EXCEPTIONS
ERROR_CNTL_CREATE = 1
ERROR_CNTL_INIT = 2
ERROR_CNTL_LINK = 3
ERROR_DP_CREATE = 4
others = 5
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
PERFORM load_data_into_grid1.
DATA: lt_unsel TYPE lvc_t_nkey,
ls_unsel LIKE LINE OF lt_unsel.
LOOP AT gt_checked INTO gs_checked.
ls_unsel = gs_checked-nodekey.
APPEND ls_unsel TO lt_unsel.
ENDLOOP.
CALL METHOD tree1->unselect_nodes
EXPORTING
it_node_key = lt_unsel
EXCEPTIONS
cntl_system_error = 1
dp_error = 2
multiple_node_selection_only = 3
error_in_node_key_table = 4
failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL METHOD tree1->unselect_all
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
FAILED = 2
others = 3
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
DATA: text TYPE lvc_value,
item TYPE lvc_t_layi,
node TYPE lvc_s_layn,
inode TYPE lvc_nkey.
FIELD-SYMBOLS: <wa> TYPE ANY.
DATA: l_dref_wa LIKE LINE OF gt_sflight.
ASSIGN l_dref_wa TO <wa>.
READ TABLE gt_checked INTO gs_checked WITH KEY nodekey = 3.
inode = gs_checked-nodekey.
CALL METHOD tree1->get_outtab_line
EXPORTING
i_node_key = inode
IMPORTING
e_outtab_line = <wa>
e_node_text = text
et_item_layout = item
es_node_layout = node
EXCEPTIONS
node_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DATA: lt_layout TYPE lvc_t_laci,
layout LIKE LINE OF lt_layout.
layout-chosen = 'X'.
layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-chosen = 'X'. "To give default checkbox value checked
layout-class = cl_gui_column_tree=>item_class_checkbox.
layout-editable = 'X'.
LAYOUT-U_CHOSEN = 'X'.
APPEND layout TO lt_layout.
CALL METHOD tree1->change_node
EXPORTING
i_node_key = inode
i_outtab_line = <wa>
IS_NODE_LAYOUT =
it_item_layout = lt_layout
I_NODE_TEXT =
I_U_NODE_TEXT =
EXCEPTIONS
node_not_found = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*CALL METHOD tree1->change_item
EXPORTING
i_node_key = inode
i_fieldname = gs_checked-FIELDNAME
i_data = <wa>
I_U_DATA = ''
IS_ITEM_LAYOUT = layout
EXCEPTIONS
NODE_NOT_FOUND = 1
others = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*loop at lt_unsel into ls_unsel.
*CALL METHOD tree1->update_checked_items
EXPORTING
i_node_key = ls_unsel
i_fieldname = ''
i_checked = ''
EXCEPTIONS
PROGRAM_ERROR = 1
others = 2
*IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
*ENDIF.
*endif.
ENDFORM. " another_selection
*& Form select_all
text
--> p1 text
<-- p2 text
FORM select_all .
CONSTANTS: c_x(1) TYPE c VALUE 'X'.
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
clear l_part_key.
create hierarchy
PERFORM create_hierarchy USING c_x.
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
add own functioncodes to the toolbar
perform change_toolbar.
register events
perform register_events.
adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " select_all
*& Form clear_all
text
--> p1 text
<-- p2 text
FORM clear_all .
CONSTANTS: c_x(1) TYPE c VALUE space.
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
create hierarchy
PERFORM create_hierarchy USING c_x.
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " clear_all
*& Form delete_all
text
--> p1 text
<-- p2 text
FORM delete_all .
*********Check box modifications.
CALL METHOD tree1->delete_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " delete_all
*& Form expand_all
text
--> p1 text
<-- p2 text
FORM expand_all .
CALL METHOD tree1->expand_node
EXPORTING
i_node_key = gt_node
I_LEVEL_COUNT = 1
i_expand_subtree = 'X'
EXCEPTIONS
failed = 1
illegal_level_count = 2
cntl_system_error = 3
node_not_found = 4
cannot_expand_leaf = 5
OTHERS = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " expand_all
*& Form collapse_all
text
--> p1 text
<-- p2 text
FORM collapse_all .
CALL METHOD tree1->collapse_all_nodes
EXCEPTIONS
failed = 1
cntl_system_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " collapse_all
*& Form load_data_into_grid
text
--> p1 text
<-- p2 text
FORM load_data_into_grid .
DATA:
For parameter IS_VARIANT
l_layout TYPE disvariant,
gs_layout TYPE lvc_s_layo.
DATA gi_sflight TYPE TABLE OF zsflight.
Load data into the grid and display them
l_layout-report = sy-repid.
gs_layout-grid_title = 'Amits Test Program'.
gs_layout-sel_mode = 'A'.
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'SFLIGHT'
is_layout = gs_layout
is_variant = l_layout
i_save = 'A'
CHANGING
it_outtab = gi_sflight.
ENDFORM. " load_data_into_grid
*& Form load_data_into_grid
text
--> p1 text
<-- p2 text
FORM load_data_into_grid1.
DATA:
For parameter IS_VARIANT
l_layout TYPE disvariant,
gs_layout TYPE lvc_s_layo.
DATA gi_sflight TYPE TABLE OF zapempl.
Load data into the grid and display them
l_layout-report = sy-repid.
gs_layout-grid_title = 'Rams Test Program'.
gs_layout-sel_mode = 'A'.
SELECT *
FROM zapempl
INTO TABLE gi_sflight.
CALL METHOD ro_grid->set_table_for_first_display
EXPORTING
i_structure_name = 'ZAPEMPL'
is_layout = gs_layout
is_variant = l_layout
i_save = 'A'
CHANGING
it_outtab = gi_sflight.
ENDFORM. " load_data_into_grid1
*& Form build_header
build table for html_header
--> p1 text
<-- p2 text
FORM build_comment USING
pt_list_commentary TYPE slis_t_listheader
p_logo TYPE sdydo_value.
DATA: ls_line TYPE slis_listheader.
LIST HEADING LINE: TYPE H
CLEAR ls_line.
ls_line-typ = 'H'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'ALV-tree-demo: flight-overview'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
STATUS LINE: TYPE S
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'valid until'. "#EC NOTEXT
ls_line-info = 'January 29 1999'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
ls_line-key = 'time'.
ls_line-info = '2.00 pm'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
ACTION LINE: TYPE A
CLEAR ls_line.
ls_line-typ = 'A'.
LS_LINE-KEY: NOT USED FOR THIS TYPE
ls_line-info = 'actual data'. "#EC NOTEXT
APPEND ls_line TO pt_list_commentary.
p_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "build_comment
*& Form create_hierarchy
text
--> p1 text
<-- p2 text
FORM create_hierarchy USING p_x.
DATA: ls_sflight TYPE sflight,
lt_sflight TYPE sflight OCCURS 0.
get data
SELECT * FROM sflight INTO TABLE lt_sflight
UP TO 200 ROWS .
SORT lt_sflight BY carrid connid fldate.
add data to tree
DATA: l_carrid_key TYPE lvc_nkey,
l_connid_key TYPE lvc_nkey,
l_last_key TYPE lvc_nkey.
l_part_key TYPE lvc_nkey
PERFORM add_carrid_line USING ls_sflight
CHANGING l_part_key.
gt_node = l_part_key.
LOOP AT lt_sflight INTO ls_sflight.
ON CHANGE OF ls_sflight-carrid.
PERFORM add_carrid_line USING ls_sflight
l_part_key
CHANGING l_carrid_key.
PERFORM add_connid_line USING ls_sflight
l_carrid_key
CHANGING l_connid_key.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
CONTINUE.
ENDON.
ON CHANGE OF ls_sflight-connid.
PERFORM add_connid_line USING ls_sflight
l_carrid_key
CHANGING l_connid_key.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
CONTINUE.
ENDON.
PERFORM add_complete_line USING ls_sflight
l_connid_key
p_x
CHANGING l_last_key.
ENDLOOP.
calculate totals
CALL METHOD tree1->update_calculations.
this method must be called to send the data to the frontend
CALL METHOD tree1->frontend_update.
ENDFORM. " create_hierarchy
*& Form add_carrid_line
add hierarchy-level 1 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_carrid_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
ls_sflight TYPE sflight.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-t_image = '@3P@'.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-style =
cl_gui_column_tree=>style_intensifd_critical.
APPEND ls_item_layout TO lt_item_layout.
add node
l_node_text = ps_sflight-carrid.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_carrid_line
*& Form add_connid_line
add hierarchy-level 2 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_connid_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value,
ls_sflight TYPE sflight.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-t_image = '@3Y@'.
ls_item_layout-style =
cl_gui_column_tree=>style_intensified.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
APPEND ls_item_layout TO lt_item_layout.
add node
l_node_text = ps_sflight-connid.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
i_node_text = l_node_text
is_outtab_line = ls_sflight
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_connid_line
*& Form add_cmplete_line
add hierarchy-level 3 to tree
-->P_LS_SFLIGHT sflight
-->P_RELEATKEY relatkey
<-->p_node_key new node-key
FORM add_complete_line USING ps_sflight TYPE sflight
p_relat_key TYPE lvc_nkey
p_x
CHANGING p_node_key TYPE lvc_nkey.
DATA: l_node_text TYPE lvc_value.
set item-layout
DATA: lt_item_layout TYPE lvc_t_layi,
ls_item_layout TYPE lvc_s_layi.
ls_item_layout-fieldname = tree1->c_hierarchy_column_name.
ls_item_layout-chosen = p_x. "To give default checkbox value checked
ls_item_layout-class = cl_gui_column_tree=>item_class_checkbox.
ls_item_layout-editable = 'X'.
APPEND ls_item_layout TO lt_item_layout.
l_node_text = ps_sflight-fldate.
CALL METHOD tree1->add_node
EXPORTING
i_relat_node_key = p_relat_key
i_relationship = cl_gui_column_tree=>relat_last_child
is_outtab_line = ps_sflight
i_node_text = l_node_text
it_item_layout = lt_item_layout
IMPORTING
e_new_node_key = p_node_key.
ENDFORM. " add_complete_line
*& Form register_events
text
--> p1 text
<-- p2 text
FORM register_events.
define the events which will be passed to the backend
DATA: lt_events TYPE cntl_simple_events,
l_event TYPE cntl_simple_event.
define the events which will be passed to the backend
l_event-eventid = cl_gui_column_tree=>eventid_expand_no_children.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_checkbox_change.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_context_men_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_node_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_context_menu_req.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_header_click.
APPEND l_event TO lt_events.
l_event-eventid = cl_gui_column_tree=>eventid_item_keypress.
APPEND l_event TO lt_events.
CALL METHOD tree1->set_registered_events
EXPORTING
events = lt_events
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
illegal_event_combination = 3.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
set Handler
DATA: l_event_receiver TYPE REF TO lcl_tree_event_receiver.
CREATE OBJECT l_event_receiver.
SET HANDLER l_event_receiver->handle_node_ctmenu_request
FOR tree1.
SET HANDLER l_event_receiver->handle_node_ctmenu_selected
FOR tree1.
SET HANDLER l_event_receiver->handle_item_ctmenu_request
FOR tree1.
SET HANDLER l_event_receiver->handle_item_ctmenu_selected
FOR tree1.
SET HANDLER l_event_receiver->handle_checkbox_change FOR tree1.
ENDFORM. " register_events
*& Form change_toolbar
text
--> p1 text
<-- p2 text
FORM change_toolbar.
DATA: toolbar_event_receiver TYPE REF TO lcl_toolbar_event_receiver.
get toolbar control
CALL METHOD tree1->get_toolbar_object
IMPORTING
er_toolbar = mr_toolbar.
CHECK NOT mr_toolbar IS INITIAL.
add seperator to toolbar
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = ''
icon = ''
butn_type = cntb_btype_sep
text = ''
quickinfo = 'This is a Seperator'. "#EC NOTEXT
add Standard Button to toolbar (for Delete Subtree)
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = 'DELETE'
icon = '@18@'
butn_type = cntb_btype_button
text = ''
quickinfo = 'Delete subtree'. "#EC NOTEXT
add Dropdown Button to toolbar (for Insert Line)
CALL METHOD mr_toolbar->add_button
EXPORTING
fcode = 'INSERT_LC'
icon = '@17@'
butn_type = cntb_btype_dropdown
text = ''
quickinfo = 'Insert Line'. "#EC NOTEXT
set event-handler for toolbar-control
CREATE OBJECT toolbar_event_receiver.
SET HANDLER toolbar_event_receiver->on_function_selected
FOR mr_toolbar.
SET HANDLER toolbar_event_receiver->on_toolbar_dropdown
FOR mr_toolbar.
ENDFORM. " change_toolbar
*& Form init_tree
text
--> p1 text
<-- p2 text
FORM init_tree.
create fieldcatalog for structure sflight
PERFORM build_fieldcatalog.
create container for alv-tree
DATA: l_tree_container_name(30) TYPE c,
l_custom_container TYPE REF TO cl_gui_custom_container.
l_tree_container_name = 'TREE1'.
IF sy-batch IS INITIAL.
CREATE OBJECT l_custom_container
EXPORTING
container_name = l_tree_container_name
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
ENDIF.
create tree control
CREATE OBJECT tree1
EXPORTING
parent = l_custom_container
node_selection_mode = cl_gui_column_tree=>node_sel_mode_multiple "node_sel_mode_single
item_selection = 'X'
no_html_header = ''
no_toolbar = ''
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
illegal_node_selection_mode = 5
failed = 6
illegal_column_name = 7.
IF sy-subrc <> 0.
MESSAGE x208(00) WITH 'ERROR'. "#EC NOTEXT
ENDIF.
create Hierarchy-header
DATA l_hierarchy_header TYPE treev_hhdr.
PERFORM build_hierarchy_header CHANGING l_hierarchy_header.
create info-table for html-header
DATA: lt_list_commentary TYPE slis_t_listheader,
l_logo TYPE sdydo_value.
PERFORM build_comment USING
lt_list_commentary
l_logo.
repid for saving variants
DATA: ls_variant TYPE disvariant.
ls_variant-report = sy-repid.
create emty tree-control
CALL METHOD tree1->set_table_for_first_display
EXPORTING
is_hierarchy_header = l_hierarchy_header
it_list_commentary = lt_list_commentary
i_logo = l_logo
i_background_id = 'ALV_BACKGROUND'
i_save = 'A'
is_variant = ls_variant
CHANGING
it_outtab = gt_sflight "table must be emty !!
it_fieldcatalog = gt_fieldcatalog.
CONSTANTS: c_s(1) TYPE c VALUE space.
create hierarchy
PERFORM create_hierarchy USING c_s.
add own functioncodes to the toolbar
PERFORM change_toolbar.
register events
PERFORM register_events.
adjust column_width
call method tree1->COLUMN_OPTIMIZE.
ENDFORM. " init_tree
Award points if found useful.
Regards
Indrajit -
How to get Tree structure in JSP page?
Hi,
I would like get data from the database and display the data in tree structure with the check boxes at each nodes on a jsp page with out using any third party tools. how can i do that? Do i require any new tags to fulfill this requirement?
can any one help me out by sending any example code?
thanks in advance.
Regards,
ReddyOnce you have the data in a list or something, can't you just use <c:forEach> and then output standard nested <ul> and <li> tags to give the tree structure.
<html>
<style>
li
list-style-type:none;
</style>
<body>
<form>
<ul>
<li>
<input type="checkbox">Check 1</input>
<ul>
<li>
<input type="checkbox">Check 1A</input>
</li>
<li>
<input type="checkbox">Check 1B</input>
</li>
</ul>
</li>
<li>
<input type="checkbox">Check 2</input>
<ul>
<li>
<input type="checkbox">Check 2A</input>
</li>
</ul>
</li>
<li>
<input type="checkbox">Check 3</input>
</li>
</ul>
</form>
</body>
</html> -
Tutorial Announcement :: How To Use Auto Complete Text Form Control ::
Hello Everyone...
Here in this tutorial we gonna to learn a new and amazing feature of (ADDT), we will learn how to use Adobe developer toolbox (ADDT) form controls.
Form controls help you to add a fantastic features to your forms, that helps you to expand the form abilities and functionality...
The Auto complete Text Field is an enhanced text field that dynamically completes what you type with matched values from a table. You can also select the values from a list.
You can use the Auto complete Text Field in user registration forms, such as allowing users to select their country or city easier, Also in other forms that needs the user to pick one of many choices without any difficulties.
Requirements
To complete this tutorial you will need to install the following software and files:
Adobe Dreamweaver Cs3
Adobe Developer Toolbox (ADDT)
Don't forget: to try out the Demo type the first three letters :A - B - C
:: Go To Tutorials ::
:: Go To Tutorials ::
Best Regards
Waleed Barakat
Developer-Online Creator and programmer
http://www.developer-online.comHeya Waleed,
I use spry to create an autocomplete form that works great across browsers that have javascript enabled. You can store info in a database and parse the info to xml for a dynamic approach. Take a look at the filter examples in spry.
http://labs.adobe.com/technologies/spry/samples/data_region/NonDestructiveFilterSample.htm l
http://labs.adobe.com/technologies/spry/samples/data_region/ZuggestSample.html -
How to use tree tables with CRUD operation for begineers ADF 11g
This is Friday night call for help.
This is only few sample ressources on the web for tree table and only one with CRUD operation.
I used this one http://jobinesh.blogspot.com/2010/05/crud-operations-on-tree-table.html because this is the only one that address CRUD.
And it is shaky. Deletion works fine but insertion not very well. This is working using custom code provided below.
Depending if the user selection in the tree, the code insert from the master node to the children node.
Any other options because it is not working well.
Also where Oracle describes how to use the row, rowset, itorator API? This is really hard to understand like almost if we should not use it.
then if not how can I insert in tree with two nodes and insert in the parent or children depending the users selection.
Lately I 'been posting questions on this forum with no response. This hurts. I understand developers cannot spend their time on this but People from Oracle, please help. We pay licenses...
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "model.DepartmentsView";
final String empViewDefName = "model.EmployeesView";
if (ri != null && selectedNodeKey != null) {
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
Row foundRow = found[0];
String nodeDefname =
foundRow.getStructureDef().getDefFullName();
if (nodeDefname.equals(deptViewDefName)) {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
parents.insertRow(childrow);
} else {
RowSet parents =
(RowSet)foundRow.getAttribute("EmployeesView");
Row childrow = parents.createRow();
childrow.setAttribute("DepartmentId",
foundRow.getAttribute("DepartmentId"));
parents.insertRow(childrow);
} else {
System.out.println("Node not Found for " + selectedNodeKey);
}I am looking for a sample that describe how to design a jsf page with a tree table.
So you have Department and employees. In the tree first comes Department and if you click the node you see the employees assigned to this department.
I need to be able to insert a new department or a new employee from the tree table by clicking on a insert button in the panel collection toolbar depending on user selection in the tree.
I got part of it working but not good enough.
By problem is the get insertion working
I have a createChildren method in my AM implementation that get in input a RowIterator and selected node key.
To goal is to create new records depending of the user selection and the input parameters get populated by the binding like this:
#{backing_treeSampleBean.selectedNodeRowIterator} #{backing_TreeSampleBean.selectedNodeRowkey} via method binding with parameters.
Is it the right approach?
First to be able to insert a parent record, I select nothing in the tree and ri and selectedNodeKey comes to null
we run this code
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
//ViewObjectImpl vo = getDepartmentsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
A new blank entry appears in the parent node and we enter a value.
The the problem starts when we want to add a child to this parent.
We select the created parent and press the insert button, this code get executed
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
childRows.insertRow(childrow);
But the new entry does not appear, it is almost like it would be created for a different parent because this is a mandatory field that is not feel in yet and the interface complaints of a missing value. It is created somewhere just not a the right place... This is my guess.
Do you see something wrong with the code?
The full code og my create children method is there below
I am using jdeveloper 11.1.1.3.0 any issues with tree table to know about with this version?
Thanks for your help
public void createChildren(RowIterator ri, Key selectedNodeKey) {
final String deptViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidaySchedExceptionsView";
final String empViewDefName = "com.bcferries.app.pdfroutesched.model.SchHolidayExceptionDatesView";
if (ri != null && selectedNodeKey != null) {
// last row
Row last = ri.last();
Key lastRowKey = last.getKey();
// if the select row is not the last row in the row iterator...
Row[] found = ri.findByKey(selectedNodeKey, 1);
if (found != null && found.length == 1) {
// foundRow is the row selected
Row foundRow = found[0];
// The row selected can be the parent node or the child node
String nodeDefname = foundRow.getStructureDef().getDefFullName();
// if parent row
if (nodeDefname.equals(deptViewDefName))
//list of the children of the parent and create an new row
//works but we try to resolve the creation of a parent
RowSet childRows = (RowSet)foundRow.getAttribute("SchHolidayExceptionDatesView");
Row childrow = childRows.createRow();
//childrow.setAttribute("HolidayDate", new java.util.Date().getDate());
System.out.println("insert child row from master");
childRows.insertRow(childrow);
} else
//RowSet ParentRow = (RowSet)foundRow.getAttribute("SchHolidaySchedExceptionsView");
//RowSet childRows = (RowSet)ParentRow.first().getAttribute("SchHolidayExceptionDatesView");
Row childrow = ri.createRow();
System.out.println("insert child row from child ");
} else {
System.out.println("Node not Found for " + selectedNodeKey);
} else {
System.out.println(" param null try creating for first row : " +
ri + " * " + selectedNodeKey);
ViewObjectImpl vo = getSchHolidaySchedExceptionsView1();
Row foundRow = vo.first();
Row childrow = vo.createRow();
vo.insertRow(childrow);
}
Maybe you are looking for
-
Custom Calculation Script in a Form
Hi, I am trying to understand a Javascript for a form I built in Adobe. If it were excel the Formula would be =If(Subtotal > 40,40,Subtotal).....Subtotal is the field name by the way. Please help because this one is really kicking me. Any help woul
-
Avi/WMV video using Apple Remote App to Apple TV via iPad?
Will this work if I install the codecs to play these with quicktime? Or do I need to manually convert my videos to .mov to stream them? I don't have these actual products to test so I can't try to figure it out myself but if anyone has come across th
-
After upgrading to iOS 8.3, the keyboard has frozen and I can not longer text or access my contacts. I literally just upgraded to an iPhone 6, but I'm just about ready to can this phone and go with an Android. Can anyone help or have the same iss
-
Javascript - document.forms[0].elements
Hi, I'm trying ... var els = document.forms[0].elements; for(var i=0; i < els.length ; i++) { var compVal = els[i].alt; Its working in IE but not in Safar. Any alternative. Please help?
-
Execute Optimize Outside of SAP BPC
Hi Guys, I am at a client that would like their internal IT people to be able to optimize applications without having access to the SAP BPC data for governance reasons. We are having heavy performance issues due to the fact that the WB tables are gro